You’re a breath of fresh air mate. Most Aussie tradespeople won’t share skills and experience. We’ve been relying on the Americans on KZread …

@geoffsjoinery4990

2 жыл бұрын

Good to hear mate, keep following…👍

Our contractor is really so unskilled. I should have just done it myself. Thanks for sharing. This is really the only way I see fillers should finally look.

@MicheleDunstan-os1md

9 ай бұрын

Wood soon wool blend door stop this email sook

Nicely done, particularly like the screws hidden behind the hinges. top work. Thanks pal

Thank you! Very timely tip!! Haven't seen this tip anywhere else. Good job.

@geoffsjoinery4990

2 жыл бұрын

Great to hear, keep following…👍

Great video, Thanks for posting.

Just lucked into your video. Gonna try this tomorrow. Thanks

Exactly what i needed to know. Thanks!

@geoffsjoinery4990

9 ай бұрын

Good to hear, thanks for Watching 👍

Pure gold! Thank you so much!

Great work, you are very handy to have around the house

@geoffsjoinery4990

2 жыл бұрын

Thanks that’s very kind of you😁

Thank you

How to you cover the gap between the 2 boards?

I tried this with MDF particle board (the really dense stuff), but had troubles with the pocket hole screws causing the board to split/crack inside. Solved it by pre-drilling the hole in the filler board at the same angle as the pocket hole screw with a tapered drill bit. Otherwise a brilliant idea for those filler panels! You can also do the same using dowels.

@geoffsjoinery4990

Жыл бұрын

Thanks Arthur for watching & sharing your feedback. Yes it’s a good idea to pre-drill especially when using MDF. You can see me demonstrating this and mentioning the exact same tip in one of my other videos on “Installing concealed runners”. I use a long series drill bit (around 3mm) on the same pocket hole angle just a little bit to start it then screw in. Workday treat! Thanks for watching 👍

@mrki412

Жыл бұрын

I'm home DIY but what I have learned from others you always predrill MDF and melamine with screw that is the size of a body of screw you will screw in, let's say you want to use 7x50 or 5x50 confirmat screw, then you predrill with 4mm. P.S. @ Geoff, how much cm do you leave from wall? I'm thinking about making a wardrobe and this could be nice to do it next to the wall and ceiling...

@geoffsjoinery4990

Жыл бұрын

@@mrki412 somewhere around 20mm looks nice and also gives you enough material to just clamp when having to cut this to suit 😁

@franciscojacobo7876

7 ай бұрын

countersink bit is what you want for predrilling

Would love to see you installing now and scribing. I assume you remove those filler strips on site so you can scribe after installing the box.

@geoffsjoinery4990

2 жыл бұрын

Yes, this video was just about how I pre-fit these side fillers so they can fit together back on site a lot easier. After you have installed the cabinet the next step is measuring the distance from the wall to your cabinet (take a measurement at the top and bottom) then transfer that measurement onto your filler, cut and plane to suit, then a little gap filler if needed. Definitely stay tuned as I will get around to building and installing a TV unit soon and will video the whole project. Thanks for your reply :)

I would love to have a cabinet in my laundry room I really need one badly.come to Canada and build one for me please 🥰

@geoffsjoinery4990

2 жыл бұрын

Thanks for the invite, you never know maybe one day I hope to go over there might be a working holiday by the sounds of it🤣🤞

Thank you