Great to see aftermarket options. Not sold on the spoiler underneath though, with its boxy oil pan looks. One that was angled and sculpted with a sleek and aggressive look would have been greatly welcomed on my (soon to arrive) bike. Really liking the adjustable brake and clutch pedals.

@SW-MOTECH

Жыл бұрын

Hey Rob, thanks for your feedback, unfortunately you don't like the design. We´ll forward your feedback to our development and design department, so for further constructions maybe they can use your feedback 💪

@mindcave

Жыл бұрын

@@SW-MOTECH my opinion is a drop in the bucket, but perhaps it inspires none the less. Life's good regardless.

@N0kJAA

2 ай бұрын

@@mindcave AMEN 🖖🏾✅

@N0kJAA

2 ай бұрын

#SameHere regarding the Oil-Pan / Belly-Pan looking boxy 🫣🤌🏾. I can guarantee @sw-motech that said "Pan" with that Old-school Superbike look would be 🔥. I'll send you an email of a couple of suggestions and one that I saw on a Yamaha MT-09 that was wicked 😜. And yes I am more than willing & available to do some road testing free of charge 😜

@SW-MOTECH

2 ай бұрын

Hello N0kJAA, thank you very much for your comment and your associated. We look forward to receiving your email. //KS😊✌️🏍️💨

Great products, always good to see how 'on the ball' you are when new bikes come to the market. As a matter of interest, have you made the Blaze pannier fittings for the Hornet?

@SW-MOTECH

Жыл бұрын

Hello David, thank your for your comment and your positive feedback. Unfortunately the exhaust of the CB750 Hornet is too high, for this we reaseon, we do not have a BLAZE saddlebag set for this model in our range. Thank you for your understanding. //KS

Superb video! How can we remove the handlebar ends for installation of brake and clutch lever guard?

@SW-MOTECH

Жыл бұрын

Hey, you can find our mounting instructions under the following link. sw-motech.com/bike/HONDA/CB750Hornet/2023/RH12/Produkte/Schutz/Hebelschuetzer/ There you can see how the installation works. 👍🏼 //MJ

You would think that the pamnier bars could be extended for a passenger handgrip Ez add on for someone !!

center stand is an afterthought; 3rd party ? i hear all say need bigger levers; brake, shift pedals etc.

Looks good many of the addons shown except I am not sure about the true capacity of the waterproof pannier bags though, but hopefully they puff outwards far more. I'm truly not sure about the solid type panniers either with a zip function to close them up because that is not truly secure seeing someone could easily press something like the point of a screwdriver or of a pen to easily open up the zips just like what can be done with a suitcase to avoid the padlock which is a trick used by security at airports needing to inspect what is in them. However, I do certainly like the easy mount/removal of the panniers though with it's easy bobbin type mounting points. I do realize you're trying to be more cosmetically pleasing and I like the carbon look of them, but remember there is a lot of opportunist thieves out there in the World that could exploit the panniers weak security points mentioned above, as I would not want to be having to remove the panniers and top box every time if I'm leaving the bike for extended periods say in a town/city's parking lot or that while out touring or long commuting to/from work? I do like racking mounts of the sides and especially top one with the addon for the wider tail bag is excellent idea to me. Lastly, I do certainly like all the other addons shown in the video...which is a thumbs up for those!

@SW-MOTECH

Жыл бұрын

Hi Stephen, Thank you very much for your feedback. It is important to have some kind of anti-theft device in the first place. Primarily as a deterrent. Unfortunately, you are right, there will always be people who find ways and means to open luggage solutions. //HL

Awesome! Apart form versatility, are there any big advantages to your rear and side luggage solutions compared to OEM? Because i feel like it would cost about the same

@SW-MOTECH

Жыл бұрын

Hi. Thanks for your request. If you do refer to our AERO ABS cases, these are pretty much the same cases as the once that come with the Hornet already.

@ed.t.hansen6499

Жыл бұрын

Hope Shad has some boxes??

Very cool. Do you have hugger/rear mud guard?

@SW-MOTECH

Жыл бұрын

Sorry, we can't offer you a rear mud guard, Paul. // LK

Everything nice from SW Motech, but that bug spoiler (engine spoiler) should have been more angular (sporty) looking to suit those bike lines better. Same for my MT07... I'd prefer update of this design... 👍

@veljkovic92

Жыл бұрын

Also, i think making the side cases flexible in terms of volume (like soft cases, two sizes) would be more practical and look better on the bike.

@SW-MOTECH

Жыл бұрын

Hello Stefan, thank you for your comment. We are happy, that you like our products and want to thank you for your feedback. You can find our SysBag WP side bag system for the CB750 Hornet under the following link in our webshop. sw-motech.com/en/bike/HONDA/CB750Hornet/2022/RH12/products/luggage/SysBags/SysBag+WP/4052572242759.htm These soft bags are flexible in the volume. //KS

If I May: In order to decide which tankbag suits (looks good) on the 🐝 maybe you could slow dient the video and or take snapshots of your collection 🫣. Also regarding the tankbags + ring take care to make sure the red cord does NOT get between the ring and plate 😔😞. Thankfully SW-Motech assisted me in resolving this issue 👍🏾

@SW-MOTECH

2 ай бұрын

Hello N0kJAA, thank you very much for your comment and your feedback. I would be happy to pass your comment on to the relevant department. We are pleased that we were able to help you. //KS 😊✌️🏍️💨

Annoyingly the Hornet does not have bobbin attachment points on the swingarm, do you have bobbin adaptors?

@SW-MOTECH

4 ай бұрын

Hello @michaelmetcalf2685, Thank you for the message. We think you are talking about the adapter wheels to jack up your bike? Then unfortunately no. We don't have that in our range.

Is it possible to use these SLC panniers/saddlebags on the original mount that comes with the hornet? They look similar, but I don’t know if they are the same. Also, does the legend gear side bag have enough clearance from the exhaust?

@jpbelo

Жыл бұрын

To be more specific, does the hornet have space on the right side to fit the Legend Gear side bag LC2 - Black Edition ?

@SW-MOTECH

Жыл бұрын

Hey Joao, thank you so much for your interest in our products. Unfortunately I can make no statement to the original holder. Gladly you can send us a picture from the original side carrier and we try to give you a feedback. We haven't assigned our Blaze saddlebags to this bike. Only our SLC side carriers can be mounted on this bike. The Sysbag WP side bags also have enough distance to the exhaust on the SLC side carrier. Legend Gear bags haven´t been assigned to this bike. Here is a link to the bag system I mentioned: sw-motech.com/en/bike/HONDA/CB750Hornet/2023/RH12/products/luggage/SysBags/SysBag+WP/4052572242759.htm

@LansaDiag

6 ай бұрын

@@SW-MOTECH but the factory Honda holdes are just rebranded SW motech holders. Is it a trade secret thing that you can't say anything about it? I can't imagine SW motech not knowing about it.

Central stand would be nice

@SW-MOTECH

3 ай бұрын

Hello Eschaia, thank you for your comment and your associated interest in our products. Unfortunately, we do not have a center stand for the Honda CB750 Hornet, because there are no possible mounting points. Thank you for your understanding. //KS

Can you please post the link to purchase the front spoiler

@SW-MOTECH

Жыл бұрын

Hey, please be patient, the motor protection is still in development. /MJ

@paulfowler6665

Жыл бұрын

Just bought a hornet wouldn't the hard luggage set. Btw anyone make a hugger yet as it badly needs one

Will the engine crash bars also fit the new Transalp?

@SW-MOTECH

Жыл бұрын

Hey Paul, we don't have any detailed information on this yet. Please mail us again in 2 months. /MJ

@swmotech_de

Жыл бұрын

Hey Paul, if you check our latest video, you can see the products we´ve developed for the Honda Transalp. We had to design another version of the engine guard. Hopefully you like this one too ☺

Is the top case able to include an helmet?

@SW-MOTECH

10 ай бұрын

Hello Leonardo, thank you for the question. Only relatively small helmets go in here. You must then expand the Topcas for this. 😊👍🏼🏍️💨

can add Shad top box / panniers ?

@SW-MOTECH

Жыл бұрын

Hey ed.T.Hansen, thank you for the feedback. Like we said in the video, we will offer gear levers and also the foot break levers. Unfortunately it was not possible to develop a centerstand because there were no mounting points for this. Regarding the using of the topacse from Shad, please take a look at the adapterkits we have available for the STREET-Rack: sw-motech.com/en/products/luggage/luggage+racks/STREET-RACK/4052572051504.htm If you have more questions feel free to contact us at info@sw-motech.com //MJ

@ed.t.hansen6499

8 ай бұрын

Yes shad top box svailable

New seat, lower legs, and ralley hi seat

Great products, unnecessary and annoying music 😩

@SW-MOTECH

Жыл бұрын

Thanks for the feedback, sorry you don't like the music. What kind of music you would choose for this video? 😊

@stevebeale2187

Жыл бұрын

@@SW-MOTECH Not the type your playing. I’ve had lots of your products fitted to my bikes both past and present. Both my current bikes have your products from tank rings to crash bars to quick release pannier brackets, all are well designed, well made and durable. Please keep up the good work just some different music or perhaps no music at all on your videos, thanks.

GFY ... are your products wery awailable or no?

@SW-MOTECH

Жыл бұрын

Hey, for the new Hornet, our products are already available. Just check out the following link: sw-motech.com/en/bike/HONDA/CB750Hornet/2023/products/

amzaing to have a passenger seat with nohting to hang onto; bars or nothing ? Even the panniers are not usefull for support.

@ed.t.hansen6499

8 ай бұрын

Poor design

How about windshield. I mean really windshield. Not dash cover or fly screen

@SW-MOTECH

Жыл бұрын

Hello Firat, We do not have larger plastic windshields in our range. //LK

@N0kJAA

3 ай бұрын

Hehehe 🤭🤭. Same question here!

Ich muss einen Kommentar abgeben, seien Sie nicht böse, aber Aluminum? 😂

@SW-MOTECH

Жыл бұрын

Hallo Dudo, alles gut aber welchen Artikel meinst du genau und warum kein Aluminium? 🤔 //HL

@dubravkojanusic6996

Жыл бұрын

@@SW-MOTECH Aluminium, nicht Aluminum. Ich finde es immer lustig, diese amerikanischen Ausdrücke zu hören.

Crash bars look hideous just put the Honda sliders on 🤷🏼‍♂️ belly pan looks hideous 🤷🏼‍♂️ lever guards look hideous 🤷🏼‍♂️ foot pegs and levers look hideous 🤷🏼‍♂️ why take a sports naked bike and bolt on all this rubbish? Just buy an adventure bike like the Transalp! You’ve taken a cool looking bike and made it look ridiculous 😂

It's Available not Awailable. It's Visual not Wisual. It's VERY not Wery.