The BEST Onboard-Air Compressor Mount for the 3rd gen Tacoma - Behind Grille Air Compressor Mount

Looking for the best location to mount your onboard-air? In our opinion, this is the best location and here's why. The air compressor will be away from other engine parts, it is in front of the engine, so it gets maximum air for cooling, and it doesn't occupy your secondary battery location.
This will only fit the 3rd gen Tacoma for the time being; we will also have a mount for the 2nd gen Tundra and 5th gen 4Runner.
3rd gen Tacoma Behind Grille Mount: www.runnin4tacos.com/products...
#onboardairtacoma #tacomaarb #arbtwintacoma

Пікірлер: 90

  • @dgio5052
    @dgio50522 жыл бұрын

    Cool idea. Blocking the airflow to that radiator might not make it overheat necessarily, but it will cause a squared off hot spot to occur over time on the radiator. Used to see it where people would have their license plate mounted on their grill. The cores inside would get way to hot and fuse together, just in that section where air was restricted. Hence, higher probability of cracking/leaking and at the very least, being less efficient. Happy trails🤙

  • @X_Squared_X
    @X_Squared_X3 жыл бұрын

    Exactly what I was looking for 5 months ago. So much space behind that grill.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Agreed

  • @Michael_Tran
    @Michael_Tran3 жыл бұрын

    You guys always find new and cool mods for the Tacoma! Love it!

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    🙏

  • @bradenb
    @bradenb3 жыл бұрын

    This is very innovative but I can't bring myself to putting anything that large in front of the radiator.

  • @jonbrice4976

    @jonbrice4976

    3 жыл бұрын

    Agreed, more weight. Get ready for the new coil spings, 170’s?

  • @graynotescartridgebox

    @graynotescartridgebox

    3 жыл бұрын

    Agreed.

  • @De_forresto
    @De_forresto3 жыл бұрын

    Super clean!

  • @iamoutofideas13
    @iamoutofideas1310 ай бұрын

    Nice setup

  • @julestrdprodjimavicpro2869
    @julestrdprodjimavicpro28693 жыл бұрын

    that's pretty cool!

  • @miguel00ize
    @miguel00ize11 ай бұрын

    Very good!!!!!!!!!!!!!!🎉

  • @fskrisfx
    @fskrisfx Жыл бұрын

    Really need an instal video for this

  • @davidcarranza1987
    @davidcarranza19873 жыл бұрын

    Great stuff!! Always looking forward for your content. Would this kit also work on 5th Gen 4Runner ?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    It won't but we will have the 4R version in about a week or 2

  • @JuniorJr_23
    @JuniorJr_233 жыл бұрын

    very nice

  • @robertpanda2507
    @robertpanda25073 жыл бұрын

    What about washing the truck? Does it affect the compressor or its components?

  • @jonnytacooutdoors
    @jonnytacooutdoors Жыл бұрын

    Does the arb manifold come with the arb compressor?

  • @ConnerBracken
    @ConnerBracken3 жыл бұрын

    Hopefully the truck doesn't over heat in the desert

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    There's plenty of airflow. We had had this setup on 2 trucks before this video and no overheating with all the trails and long drives in Moab last summer.

  • @michaelm4514
    @michaelm45143 жыл бұрын

    why not go dual battery up front right corner and compressor in rear?

  • @LesFishingMoreCatching
    @LesFishingMoreCatching3 жыл бұрын

    I mounted mine on the Slee Offroad on the driver side. I plan on putting extra battery on passenger side on my 4R. In NY the winter snow melting salt would kill that thing fast.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Totally understandable

  • @SigmaWolfOutdoors
    @SigmaWolfOutdoors2 жыл бұрын

    My concern if 90° piece is used it could snap hose swinging around .manifold mount seems mounted more solid

  • @juandelavega5667
    @juandelavega56672 жыл бұрын

    Need install video please!!! Already purchased now just trying to make the install the correct way

  • @christiansapida389
    @christiansapida3892 жыл бұрын

    Are you guys gonna make install video on this set up?

  • @jonathanhill9758
    @jonathanhill9758 Жыл бұрын

    Do you have an installation video for this mount?

  • @Yankeefan78471
    @Yankeefan784713 жыл бұрын

    Can you make one for the single? I have my compressor mounted in the bed cubby with the expedition essentials bracket and it’s a terrible design. I’ll bet we could mount the compressor where you did and then re-route the compressor intake to behind the headlight so it avoids oncoming dust. Having the intake directly in front of the radiator is asking for problems when you drive behind someone on a dirt road.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    We can add mounting holes to the next batch

  • @soukchaysounthonevat1530
    @soukchaysounthonevat15303 жыл бұрын

    What is the scones battery for can you tell ask please

  • @ryansarmiento9846
    @ryansarmiento98463 жыл бұрын

    Hope you do an install video. Will this work with an ARB single?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    We will. It currently does not but in the next batch it will

  • @White_buffalo_4r
    @White_buffalo_4r3 жыл бұрын

    I've been looking at this idea myself but mounting the smittybilt compressor on the driver side of our 4Runner

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    We may or may not be making a mount like that

  • @White_buffalo_4r

    @White_buffalo_4r

    3 жыл бұрын

    @@Runnin4Tacos on my passenger side I have the winch controls mounted up so that's why I was looking at the driver side.

  • @JahazielCruzPLUS
    @JahazielCruzPLUS Жыл бұрын

    Cool do you have t for FJCruiser?

  • @stevenroman3433
    @stevenroman34333 жыл бұрын

    Great video, Question for you. Why not mount this in the bed somewhere? I don’t know what wiring would be need so I am not sure why the bed is not feasible. Thanks

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    I use my bed space and would rather not slide stuff into it. If you have a 2019+ you lose your driver side cubby hole so that option is out

  • @mikewazowski1217
    @mikewazowski12173 жыл бұрын

    Can you do a install video on the headlights for the taco? I just purchased some and you haven’t done a video yet on them The kustom 54 AB6 headlights

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    They have should have some clear instructions on their website

  • @ramzizaz
    @ramzizaz3 жыл бұрын

    Will this work for GX460?

  • @carlosramirezcastaneda2696
    @carlosramirezcastaneda26963 жыл бұрын

    Now where does the supercharger fit? I want a dual battery system and supercharger forsure, so the location for the compressor is nice! Any air flow performance issues?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    There's plenty of airflow. We had had this setup on 2 trucks before this video and no overheating with all the trails and long drives in Moab last summer.

  • @Dennis_is_Outside
    @Dennis_is_Outside Жыл бұрын

    Different, but in front of the radiator and directly exposed to water? Traveling in a good rain storm will soak it. How's it holding up? Checked the air filters lately?

  • @Runnin4Tacos

    @Runnin4Tacos

    Жыл бұрын

    Still running strong lol

  • @reyflores4606
    @reyflores46063 жыл бұрын

    Can the hidden lower grill light bar be installed?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    We haven't tested but there is still plenty of room so we'll test it out

  • @dodobird1337
    @dodobird13373 жыл бұрын

    An you tell me what the second battery is for? And where you hook it up too??

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    For long trips where you run a fridge and other accessories to it for a long period of time

  • @30-06
    @30-063 жыл бұрын

    I don’t have onboard air but I’ve been wondering if it’s possible to use air tool with those.. like brad-nailer etc

  • @veryhengry2277

    @veryhengry2277

    3 жыл бұрын

    for the dual ARB you can. You wont be able to with the single.

  • @30-06

    @30-06

    3 жыл бұрын

    @@veryhengry2277 thanks for letting me know! You know what, how about you make a video and show us on KZread?? I bet it will be a great video, At least I haven’t came across any video like that!

  • @veryhengry2277

    @veryhengry2277

    3 жыл бұрын

    I probably should lol since I can’t make video game videos anymore.

  • @30-06

    @30-06

    3 жыл бұрын

    @@veryhengry2277 subscribed your channel waiting for the video 😂

  • @veryhengry2277

    @veryhengry2277

    3 жыл бұрын

    @@30-06 haha thanks man. I’ll get on it 😂😂

  • @landrywilliams3028
    @landrywilliams30289 ай бұрын

    How are your temps

  • @sammylindsey7151
    @sammylindsey71512 жыл бұрын

    Will rain get into the air intakes on the compressors while driving down the road?

  • @Runnin4Tacos

    @Runnin4Tacos

    2 жыл бұрын

    It shouldn't, the compressor is water proof

  • @stuartcarr9903
    @stuartcarr99032 жыл бұрын

    Where can I get this bracket?

  • @nismo613
    @nismo6133 жыл бұрын

    Sure does block a lot of air flow to the radiator. Not going to be fun in a hot climate.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    There's plenty of airflow. We had had this setup on 2 trucks before this video and no overheating with all the trails and long drives in Moab last summer. But totally understand where you're coming from

  • @tightlinesgl47
    @tightlinesgl472 жыл бұрын

    Is there an impact the radiator | cooling system!

  • @Runnin4Tacos

    @Runnin4Tacos

    2 жыл бұрын

    No sir, we've had customers run them for a year now with no issues. Including the hotter states

  • @kaneloc8491
    @kaneloc84913 жыл бұрын

    This might be a dumb question, but what is that air compressor used for?

  • @davidgriffith6627

    @davidgriffith6627

    2 жыл бұрын

    Compressors like this are used to activate differential lockers. Differential lockers lock the left and right axles at each differential to greatly improve traction. One wheel doesn’t slip more than the other when lockers are engaged. The compressor is also used to add air back into the tyres after deflating them for better traction.

  • @run-cnc
    @run-cnc3 жыл бұрын

    any idea if this would fit on the 2nd gen tacoma?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    It doesn't

  • @juandelavega5667
    @juandelavega56672 жыл бұрын

    Bro please provide installation video I've had this thing for months but i want to be able to install it correctly and came with no instructions whatsoever,

  • @danbear3054
    @danbear30543 жыл бұрын

    nice but in AZ that would not fly, in my 2019 Tacoma dealership had to install a fan right there to push more air through while idling. If not, the AC would stop blowing cold.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Noted!

  • @bubusanchez4431
    @bubusanchez4431 Жыл бұрын

    Okay so everything is installed at the moment, however I would love to know how you ran the horn below the manifold because I currently have it zip tied and have not found a solution, just yet. Let me know if someone found a solution.

  • @Runnin4Tacos

    @Runnin4Tacos

    Жыл бұрын

    I would have to look at our Taco when it is back from the turbo project. It's been too long. I do not remember.

  • @bubusanchez4431

    @bubusanchez4431

    Жыл бұрын

    @Runnin4Tacos thanks for the heads up but I figured it out and found a solution. Appreciate it 😁

  • @jonhartman2726
    @jonhartman27263 жыл бұрын

    Ayo can you put out more RAV4 content?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Sure, when we do more stuff to it

  • @sg5642
    @sg56423 жыл бұрын

    Do you guys have something like this for Tundra?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    We might, we haven't looked into it yet

  • @sg5642

    @sg5642

    3 жыл бұрын

    Do you guys do rehear for Tundra?

  • @trevorschroeder6745
    @trevorschroeder67453 жыл бұрын

    Do u have viair on board system ?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Like do we sell it? Yes we do

  • @trevorschroeder6745

    @trevorschroeder6745

    3 жыл бұрын

    @@Runnin4Tacos no thought u showed u had on in bed or under truck and and 4 quick connects under hood and in box to air up all 4 like the wifey system

  • @yourejustintim
    @yourejustintim3 жыл бұрын

    Every time I watch one of your videos my bank accout cries. To make things worse, my wife owns a Jeep TJ and I can only get something if she gets something; a double dent in the account.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Ouch but if you enjoy it its ok!

  • @slangin_caprini2693
    @slangin_caprini26933 жыл бұрын

    What bumper do you have??

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    This is the Lil B's bumper

  • @ShootingSportz
    @ShootingSportz3 жыл бұрын

    When will that hoodie be available!?

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    Next week it should go live

  • @ShootingSportz

    @ShootingSportz

    3 жыл бұрын

    @@Runnin4Tacos YEE!

  • @veryhengry2277
    @veryhengry22773 жыл бұрын

    I'm sure you have to be extra carful when washing your car as well.

  • @Runnin4Tacos

    @Runnin4Tacos

    3 жыл бұрын

    It's waterproof