Digital Build Plans Available Here: www.etsy.com/listing/923263180/build-plans-mobile-cart-plans-for-the?ref=shop_home_active_1

@marioremington345

3 жыл бұрын

I know I'm kind of off topic but do anybody know of a good website to stream new series online?

@brantleymauricio5724

3 жыл бұрын

@Mario Remington i use Flixzone. Just google for it =)

@jackrayan6575

3 жыл бұрын

@Brantley Mauricio Definitely, I have been watching on flixzone for since march myself :D

@marioremington345

3 жыл бұрын

@Brantley Mauricio thank you, signed up and it seems like a nice service :D Appreciate it!

@brantleymauricio5724

3 жыл бұрын

@Mario Remington Glad I could help =)

I was a little worried when I saw the Crocs but the build turned out excellent.

@RLLWoodworks

3 жыл бұрын

😂😂😂 I’m glad I redeemed myself a little. Thanks for watching!

@KMvrtr

2 жыл бұрын

Same!

@rodjohnson646

2 жыл бұрын

To say nothing of the socks!! LOL

The marker hack was next-level!!!!

@RLLWoodworks

2 ай бұрын

Ha thanks!

Nice build. I really like the dust collection cutout. Very clever.

@RLLWoodworks

3 жыл бұрын

Wow that means a lot coming from you Dustin! You sir, have won the award for the biggest celebrity to ever comment on one of my videos. High five!

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

Wow, this thing turned out awesome and looks built like a tank. Really enjoyed watching this, Rory! Educating and entertaining! 🙂👌

@RLLWoodworks

3 жыл бұрын

Thanks Lukas! Glad you picked up on the strength I was going for. It’s going to move around a lot so I wanted it to be strong. Didn’t quite have room for a router table like you 😉

Thank you for sharing this video. I’m going to borrow some design elements for my future table saw and assembly bench in my shop. 🙂

@RLLWoodworks

3 жыл бұрын

Awesome! Thanks for watching. Let me know if you have any questions. 👍🏻

Love the shape and function of the boxes that make up the three sections. Utilizing that space under the saw. My Craftsman has a rail that sticks out five inches on the front corner for the T-style fence. Building mine out to accommodate and make it difficult to hook my hip into it. Saw a comment about Shop Crocs. Slip on shoes like crocs are great to sneak into the garage. I wear some slippers and moccasins. Who wants to tie shoes when you run out into the garage for a quick shop visit to move a project a little along? :)

@RLLWoodworks

2 жыл бұрын

Thanks so much!! You get me.

Bought the plans, looking forward to tackling this project. I just bought this table saw. :)

@RLLWoodworks

3 жыл бұрын

Awesome!! Thanks so much Greg!! Tag me on IG when you build it. 👍🏻

I have this same table saw and this looks really cool so I'm definitely interested in some plans

@RLLWoodworks

3 жыл бұрын

Hey thanks! I’d be happy to send you what I have. Shoot me a DM on Instagram and I’ll send them over. @RLLWoodworks. 👊🏻

That infeed table is so vital.

@RLLWoodworks

5 ай бұрын

Yes! I love it.

Just bought my copy of the plans. Exactly what I was looking for.

@RLLWoodworks

9 ай бұрын

Thanks so much for your support!

We have to admit, you really did make the best mobile table saw stand. The precision is very impressive and we applaud you! Looking forward to seeing more of your videos!

@RLLWoodworks

3 жыл бұрын

Thank you guys so much for watching and the kind words! I like watching your videos too! Keep up the good work!

Great job brotha. I’m gonna steal this idea for my table saw... keep up the great work

@RLLWoodworks

3 жыл бұрын

Thanks so much!! Yes steal away!!

That is an awesome design, and turned out sweet

turned out great! Loved the sharpie technique

@RLLWoodworks

3 жыл бұрын

Thanks Seth!

Excellent video and process. Thank you for sharing. I to have a DWE7480 that I'm in the process of adding extensions. There is a excess amount of sawdust that leaks on the right side of the table saw and I'm working on an system two woodworkers used to solve the same problem on 2 different table saws. If it works, I will pass it on since we have the same table saw. Until then, keep up the great work.

@RLLWoodworks

3 жыл бұрын

Thanks so much!! Definitely let me know what you find out. That is an areas for improvement for sure so I would love to hear back what you learn. Thanks brother!!

Like many others, my biggest drawback I found to this type of saw is the infeed. The extraordinarily creative way you addressed it is fantastic. Great job!

@RLLWoodworks

2 жыл бұрын

Thanks so much! Definitely my favorite feature.

Beautiful work 👌🏼 and an extended fence attachment would go perfectly with your design for ripping long boards

@RLLWoodworks

2 жыл бұрын

Thanks so much!! Yeah that’s a great suggestion I’ll have to look into that. Thanks!

@steven6068

11 ай бұрын

I just read an article about attaching a 4’ level to the fence for longer boards. Maybe a seven 7’ would work as well.

Really nice job

Nice work! That was pretty clever using the CA and maple to fix the miter slot.

@RLLWoodworks

3 жыл бұрын

Thanks Jake! That was a doozie but it worked out okay and hopefully won’t bother me too much every time I see it.

@MakewithJake

3 жыл бұрын

@@RLLWoodworks my fix would have been just to make it wider...I think you made the right choice.

@RLLWoodworks

3 жыл бұрын

I definitely went through all the options including making a bonfire.

Great build and video man!

@RLLWoodworks

3 жыл бұрын

Thanks so much for watching Ethan!!

6:58, now you're just showing off, as would I, great build fella.

@RLLWoodworks

2 жыл бұрын

Haha! Not going to lie that was very satisfying! Thanks for watching.

Nice cabinets and drawers

@RLLWoodworks

2 жыл бұрын

Thanks so much!!!

This is almost exactly what I was thinking would work for me. I have very limited space, so the 8 foot long designs are not logical for my garage. The end product looks great.

@RLLWoodworks

Жыл бұрын

Great! I still use mine on every project.

Turned out great. Congratulations mate. 👏👏

@RLLWoodworks

3 жыл бұрын

Thanks so much Pedro! Very happy to see your success on this platform. Well deserved.

@WoodYouDoIt

3 жыл бұрын

@@RLLWoodworks thanks mate. You will get there too. 😉

10/10. Amazing project.

@RLLWoodworks

2 жыл бұрын

Wow thank you so much!!

One improvement I would make is to build a ply cover that can be put on top to use it as a work table, removed for table saw work...

@RLLWoodworks

14 күн бұрын

Great idea!

Love this video and your design... as a novice woodworker, I really appreciate that you keep the mistakes included to make us feel more sane. I have an honest question about the infeed table: I've never really thought about the lack of extension on the infeed side of the saw... now that you've had this table for a while are you still happy with that element of the table (and that the benefit out-weighs any inconvenience in working with the fence)? Thanks again!

@RLLWoodworks

3 жыл бұрын

Thanks for the kind words!! Honestly the infeed is my favorite feature of this entire cart. It makes using a cross cut jig so much easier and makes sawing longer boards more accurate and safe. Let me know if you have any other questions!!

@ttheis1

3 жыл бұрын

@@RLLWoodworks I think you have me sold on getting your plan... now just need plywood prices to come down so we can keep making things!

@RLLWoodworks

3 жыл бұрын

@@ttheis1 Haha I know seriously! Absolutely insane.

The apple moment @6:51 is just brilliant.

@RLLWoodworks

2 жыл бұрын

Haha thanks man. Frustrating part of the process for sure!

Haha. Eating the apple while sanding the grooves cracked me up. Nice cart!

@RLLWoodworks

3 жыл бұрын

Hah thanks! That was a rough day but the apple helped.

@HowIDoThingsDIY

3 жыл бұрын

@@RLLWoodworks Hahahhahah

Great job man, despite the crocs when you started... 😎😎

@RLLWoodworks

2 жыл бұрын

Haha thanks!!

Nice video...problem ahead is, when you tilt the blade your dust hole will foul, you need to cut a crescent in the ark of the outlet...., nice little cart though...thank you for sharing.

@RLLWoodworks

2 жыл бұрын

Thanks for watching! You are right and I almost forgot to do that but luckily I remembered at 2:55 ish.

Personally, I would turn the tablesaw 90 degrees, so that the handwheel is towards the drawers, I would add a piece of plywood to close the "side" opening (which would also add even more storages, if you were to make small shelves or a peg-board style plywood or even a french cleat system, and lastly I would add a fold-down table at the back of it for an outfeed. That would add so much more versatility to your design, with minimal effort. I know it is old, you probably upgraded, but yeah... Alongside with the dust collector, that would make for a pretty great mobile bench! You could also add a groove to the fold down table to add a portable router, jigsaw, sander, etc!

@RLLWoodworks

Жыл бұрын

Great suggestions!! Definitely a lot of options one could take with this concept.

I like your presentation style and humor. 6:47

@RLLWoodworks

3 жыл бұрын

😂 thanks man!! That was a rough part of the build but nothing a little apple break couldn’t fix.

@TrailTape

3 жыл бұрын

​@@RLLWoodworks Did your saw come with leveling feet or did you add them? My DW7485 has plastic covers over the feet - I suppose I need to see if there's a threaded hole once they're removed...

@RLLWoodworks

3 жыл бұрын

Hey sorry for the delay! Yes it came with threaded leveling feet but I also ended up shimming it some.

Outstanding, thanks!

@RLLWoodworks

4 ай бұрын

Thank you!

Dang! Nice build. I always just use 2x4's and other construction wood... I get weirdly OCD about making nice things for my shop, like I could be spending that time making furniture to sell.

@RLLWoodworks

2 жыл бұрын

Thanks! I totally know what you mean. This was the first project where I splurged in material. Did not regret it!

I love love love this!

@RLLWoodworks

10 ай бұрын

Thank you!!

I love the table but most of all I love your work boots

@RLLWoodworks

3 жыл бұрын

Haha thanks man! Shop crocs FTW!

Real nice looking setup. I'm currently building a similar-ish bench for my saw (7485, incredibly similar to yours). 2 questions: other than the paste wax on top, did you finish the rest of the piece with anything? And second, is there anything you would have done different from a design perspective now that you've used it a while? Appreciate the time and effort to make this video man, well done

@RLLWoodworks

Жыл бұрын

Thanks so much man! Nothing but paste wax but I nice coat of two of polycrylic on the body would probably be good. The main issue I’ve had is a lot of dust collecting on the base because the bottom of the saw is open. Not sure if that could have been addressed with the build tho. Other than that I have no regrets!

I really like this design, I’ve been frustrated by the lack of in-feed on my DW745 but few extension table designs actually include additional in-feed. How did you ensure the table of the saw was flush and level with in-feed and out-feed tables?

@RLLWoodworks

3 жыл бұрын

Agree the infeed is my favorite feature. I used the leveling feet and even some pieces of paper to get it perfect and so far it’s held up. It took me a few days of using it to dial it in tho.

Very good video

@RLLWoodworks

3 ай бұрын

Thank you! Still use this set up on every project.

Nice! I have same table saw and I like that it's mobile. But as you noticed, it's not great for larger pieces. I love the little tracks, that's the main thing. I am going to do the same thing, but with the wings that can fold down and fold up to lock in place. My one complaint about this table saw is the stupid fence. I have some tips for dealing with this "stupid fence" or SF lol. When setting it up, disregard the markings on it. Instead, I use a square to square up the fence. As you know, you get off by 1/16" of an inch out of square on a 8 foot rip cut, you are going to have a bad day. Hmm, maybe I need to sell my table saw and get a better one :)

@RLLWoodworks

2 жыл бұрын

Thanks!! Yeah it’s been a great saw for little DIY jobs but would love to upgrade one day.

@thenext9537

2 жыл бұрын

@@RLLWoodworks Trust me, this little saw I can make it do anything, as long as you are willing to build whatever it needs. *nervous laugh* also, subbed.

Awesome!

@RLLWoodworks

3 жыл бұрын

Thank you very much!

This is a great build. Did you, by any chance, mention in the plans which cuts need to be adjusted for other saws of differing heights?

@RLLWoodworks

2 жыл бұрын

Thank you so much!! No unfortunately I didn't have any other saw's dimensions to make those adjustments on the plans.

excellent !!

Just when I thought I knew which table saw base cabinet to build, I run across your design! Great work. Now I have to do a full +/- analysis 8-) BTW, at about a minute into it, you mention the "DIY K4 Kreg pocket hole jig". Did you build that? if so, do you have any details on it?

@RLLWoodworks

3 жыл бұрын

Hey man thanks so much!! Good luck on your analysis lol. Yeah I built that DIY K4 but it was before I was making videos. Check out my buddy’s channel “Make With Jake”. He made a better one and has plans for it. 👍🏻

Nice build, and clever idea on in-feed and out-feed. Question, have you secured the saw to the table so it will not shift, etc, and if so how so? Thanks!

@RLLWoodworks

2 жыл бұрын

Thanks so much!! Yep I screwed it into the cart and then a screwed in a couple of blocks around the base to keep it in place. A little awkward but was able to get it done.

The crocs!!! Love it! Haha

@RLLWoodworks

3 жыл бұрын

Haha thanks man. You get me.

@MakingMadeSimple

3 жыл бұрын

​@@RLLWoodworks They're so versatile! Great build, by the way! I think I'll be making something similar. My table saw management is terrible, haha.

@RLLWoodworks

3 жыл бұрын

@@MakingMadeSimple Sounds awesome! Let me know if you do. Tons of similar carts out there and all are really good.

This looks clean, although (safety nerd alert) I would move the stop sw, esp. before sharing the design with novice woodworkers.

@RLLWoodworks

2 жыл бұрын

Yeah good call. I need some safety nerd in my life.

Beautiful and well designed Table. Bought your plans, which seem very nice, and plan to build it over the next few weeks. One problem: Your Amazon link goes to sets of 6 pairs of drawer slides. You just used 4. And it opens with 8 inch ones highlighted, but it looks like you used 22 inch? Can you update that link to prevent people from getting the wrong slides like I almost did?

@RLLWoodworks

2 жыл бұрын

Thanks for your support and thanks for the info on the link! Yes I will update it now! 🙏🏻

amazing

@RLLWoodworks

Жыл бұрын

Thanks for watching!!

Well done. I thought I was the only one who could screw up a cut. I don’t have a router either. I have what you have. Great video and I’m going to build this too. Well, give it a shot. I’m new…..

@RLLWoodworks

Жыл бұрын

Thanks good luck!!!

Noice! Thanks for sharing!

@RLLWoodworks

Жыл бұрын

Thanks for watching!

Do you have any issues reaching the on/off switch, tilt or raise and lower on the front of the saw?

@RLLWoodworks

2 жыл бұрын

Really good question. I need to bend down a little to get my arm in there and probably wouldn’t want to make the infeed any longer. But it’s not too big of a deal.

When I have that problem I just buy low profile casters, and a case of beer!

that’s pretty nifty

@RLLWoodworks

3 жыл бұрын

Thanks so much!

What is the hights of the tablesaw table and on you workshop bench. Im about to total redo my workshop. And i want to be able to put it away under the work ench

Nice work, how I make to buying plans from Mexico?

Well done…

10 points for end results. 20 points for showing your mistakes. Minus 5 points for wearing Crocs. Minus another 10 points for wearing socks with the Crocs. But...you got a subscriber!

@RLLWoodworks

2 жыл бұрын

🤣🤣🤣 I’ll take what I can get thanks!!

Hi pal, awesome stuff! Would you mind advising how you got the fence movement thing so smooth and long? It's been a long time issue with mine, I wanna upgrade

@RLLWoodworks

2 жыл бұрын

Thank you! Are you talking about the miter gauge that I slid across the top? Or the rip fence on the actual saw? Or something else?

@clevelandexplorer2221

2 жыл бұрын

@@RLLWoodworks the rip fence, pal. Mine has a very short kinda "T" on the actual table saws rip fence which needs to be pushed in to even and straighten it. Something like yours would negate any doubt in whether it's parallel

@RLLWoodworks

2 жыл бұрын

I gotcha. My saw has a has a rack and pinion mechanism and it connects on both the front and back so it’s always parallel. Definitely one of the best features on this little job site saw. Great engineering by DeWalt.

@clevelandexplorer2221

2 жыл бұрын

@@RLLWoodworks sorry, how might I look into getting one myself bud? And is it universal at least for the most part? It does look good. I don't often see tables saws bit enough to differ- isn't every smaller "tabletop" box shaped table saw classed as a job site saw? Idk the difference myself but do see the name difference on the likes of Screwfix or toolstation (UK supplier)

@RLLWoodworks

2 жыл бұрын

The exact one I have they don’t make anymore but here is one very similar on Amazon. Has the same fence mechanism. www.amazon.com/dp/B0842QDW95/ref=cm_sw_r_cp_api_i_35EZ0JCN420WFFAHPE8H

First Rules of carpenters, you don't talk about the mistakes, they are characteristics

@RLLWoodworks

2 жыл бұрын

Haha 😂 I love it!

I see the bottom drawer and slider is lifted 3/4. What did you use for measuring the top slide?

@RLLWoodworks

5 ай бұрын

I cut a couple blocks the same height as the bottom drawer and then put the upper slides on top of those blocks.

@azuldiablo18

5 ай бұрын

@@RLLWoodworks wow! Thank you so much for the quick reply here on a 3 year old video! I had just enough time to grab 3/4 scrap and open the packaging of the slides before I got a reply! You rock!

Do you have plans for sale for the push stick you use?

@RLLWoodworks

2 жыл бұрын

I don’t bc I just made it up real quick, sorry!! I think Make with Jake has a push stick video with free plans.

Hi, are the plans compatible with the dw7485? Iv just purchased them and noticed they're for the 7480.

@RLLWoodworks

2 жыл бұрын

Is that the one without the stand and an 8.5” blade? If so they should work. My saw is roughly 24x24x13 so if you are within that envelop you should be good! Thanks so much for your support.

@dooby6400

2 жыл бұрын

@@RLLWoodworks I think the 7485 is the new version of the 7480, its approx half inch smaller in width and depth. Thanks

6:18 - the fence wasn't the issue here. It was the wrong direction you were going with you router along the fence. I don't know the correct english term for this, but in german there is "Gleichlauf" and "Gegenlauf". When you are routing in "Gleichlauf", that means you are going with your router in the same direction as your router bit does, it is pretty hard to lead the router along a fence without any wobble. I have a good link to a german woodworking journal where this issue is adressed, but it is only in german. Cheers!

@RLLWoodworks

3 жыл бұрын

Thanks for the info L. K.! Sounds like you’re talking about the English term “clockwise” and “counter clockwise”. I’m a novice so really appreciate the comments!!

@l.k.1011

3 жыл бұрын

@@RLLWoodworks Yes, I guess that's the correct english term for what I meant. ;) This is the link to the mentioned article - by using your right thumb and index finger, you can always check if our are going counter clockwise (or counter rotation?) with your router. Maybe you can figure it out by the pictures of the article what I meant. All the best from Austria! www.holzwerken.net/artikel/archiv/so-fraesen-sie-immer-sicher-im-gegenlauf

@RLLWoodworks

3 жыл бұрын

Awesome thanks so much!!!

@daneyuleb

2 жыл бұрын

@@l.k.1011 From the video, isn't he following the finger rule? (Point your right hand thumb (palm down) at the fence, and you naturally point the direction the router should take. That's what I'm seeing in the vid...

@l.k.1011

2 жыл бұрын

@@daneyuleb Exactly, that is what he is showing! ;)

how did you make your kreg jig?

@RLLWoodworks

2 жыл бұрын

I kind of wung it but Make With Jake has a really good video with more detail if you want to check him out.

Would the plans be adaptable to Dewalt 7491?

@RLLWoodworks

8 ай бұрын

I believe you’ll have to modify the cavity that holds the saw to made it a tad bigger for the 7491

Very nice work! What are the overall dimensions?

@RLLWoodworks

Жыл бұрын

Thank you!! It’s about 43” wide, 35” tall, and 24.5” deep. Give it take

@joedance14

Жыл бұрын

@@RLLWoodworks Appreciate the info. Limited storage space.

I have a craftsman, if I buy these instructions, what pieces of wood would I cut different? Would it be too many to be better off not buying the plans?

@RLLWoodworks

2 жыл бұрын

Great question. Can you share the dimensions of the craftsman? Height, width and depth?

@jz497

2 жыл бұрын

@@RLLWoodworks thanks for the reply. The height is 12” length is 27 3/8” and width is 32.5” inches

@RLLWoodworks

2 жыл бұрын

Mine is 13” by 23” wide and 23.5” deep so sounds like you could need to make it a bit bigger. You could definitely do it but it would take some redesign.

How much modification would be needed to plans if I wanted to incorporate the Dewalt dwe 7491rs table saw

@RLLWoodworks

Жыл бұрын

Assuming you can take off the stand and wheels it should need much. If you can tell me the dimensions of just the saw I should be able to tell you.

@navdaman4431

Жыл бұрын

@@RLLWoodworks unbolted from folding stand dimensions are 26.5in wide, 21.5in deep, 12.5in tall (just to the table, not fence). There is also a dust port that sticks another 2in out the back.

@RLLWoodworks

Жыл бұрын

@@navdaman4431 This cart was built for my saw which is right about 23" wide, 23" deep, 13" high so it sounds like you would only need to make it a bit wider.

@navdaman4431

Жыл бұрын

@@RLLWoodworks thank you for reply I will take note of those dimensions and look over the video and see how much plan changes I would have to do.

Do you have any plans for this project

@RLLWoodworks

3 жыл бұрын

Hey there! I have a basic cut list and step by step draft that I would be happy to share. Shoot me a DM on Instagram (RLLWoodworks) with your email and I’ll send the file your way.

@ninossarkis

3 жыл бұрын

@@RLLWoodworks hey man can I please get those plans?? I'll message you through my @ns.woodworking account. Thank you!!

@RLLWoodworks

3 жыл бұрын

@@ninossarkis Hope the plans are helpful man! Let me know if you make this cart!

The Crocs 😂

Nice that you can put the new cart away under an already built work desk

@RLLWoodworks

Жыл бұрын

Thanks!

Here from TikTok

@RLLWoodworks

3 жыл бұрын

Thanks so much for coming over!! Hope you find the full video helpful. Appreciate you!

I hate when those problems arise. Never a good time for problems

Do you have plans available for this cart?

@RLLWoodworks

3 жыл бұрын

Hey man thanks for asking! I’m working with a graphic designer now to draw some up. If you need them ASAP let me know and I’ll send you the cut list, materials and steps.

@indiff3rence

3 жыл бұрын

@@RLLWoodworks I'm interested aswell

@RLLWoodworks

3 жыл бұрын

@@indiff3rence I have a very basic draft that I would be happy to share. DM me on Instagram with your email and I'll send them over!

@RLLWoodworks

3 жыл бұрын

I have a basic draft that I can share if you want to shoot me your email (Instagram is RLLWoodworks) I'll send them to you.

@liebekopf

3 жыл бұрын

@@RLLWoodworks Hi. Nice work, wanna build my own one. Any chance of getting hold on a basic draft? Cheers. Mail: fg.murer@gmail.com

would this work for a DWE7490?

@RLLWoodworks

3 жыл бұрын

From what I can gather it should. If you want to shoot me the H, W and D I’d be happy to tell you for sure.

@briankalina2491

3 жыл бұрын

@@RLLWoodworks I measured and it appears to be H = 12.5" W = 26.75" D = 22" or 25" with the fence track.... However, one website said it was 12-3/4 in H x 26-1/2 in W x 26-3/4 in D Table size according to manual is 21 7/8" x 26 3/8" Thanks!

@RLLWoodworks

3 жыл бұрын

@@briankalina2491 Hey thanks for the info! The saw this was built for is 13Hx23Wx23D so in order for the 7490 to fit one would need to make some adjustments by either getting rid of the infeed table (I love mine so wouldn't suggest) or the dust cabinet, or making the entire thing longer and deeper.

@briankalina2491

3 жыл бұрын

@@RLLWoodworks thanks! I definitely want the infeed table!

@ttheis1

3 жыл бұрын

@@RLLWoodworks I was just circling back through these comments since I realized I have the DWE7485 (8.25" blade) after I bought your plans. I looked up the 7480 (10" blade) and it showed dimensions as 25.75 x 26.5 x 13.88 inches. But what you just posted above matches my specs so not thinking I need to make any modifications?

Really nice - just too small to be useful though.

@RLLWoodworks

2 жыл бұрын

Definitely not as big as I would like just don’t have room right now so this has been a great upgrade for me and the projects I do with it. Thanks for watching!

@pingpong9656

2 жыл бұрын

@@RLLWoodworks You're right - it can be really useful for a bunch of smaller projects and it sure is easy to get out of the way compared to a monster setup!

@RLLWoodworks

2 жыл бұрын

Haha for sure. I can’t wait to have a monster setup one day!

Excuse me while I use this video as a step by step to solve a similar problem.....

Have anyone the plan for free?

hahahhaahahahha i used a garbage harbor freight router to try to route the same thing into a bigger table i built and did the exact same thing.....only i didnt think to glue a strip in there to fix it.

@RLLWoodworks

Жыл бұрын

Ha yeah that was brutal

Crocks n socks 😂

Why convert a saw meant for 2X4 construction lumber into a shop tool (which I will assume will be used for woodwork)? Regardless of the effort, this will never be able to deliver cuts as nice as any entry lever real stationary table saw, witch prices starting at $649 (Delta) or $7-ish Ridgid at 3.25 HP...

@RLLWoodworks

3 жыл бұрын

I agree those are both definitely better saws. I looked at them and would have loved to get either but I needed something that I could store away because I don’t have that much space. I will say that this DeWalt has done everything I’ve asked it to do and I’m very happy with it.

@lukenfoci

3 жыл бұрын

Why not? This table saw costs half-two thirds of what you mentioned and is mobile. So if I need it around the house to cut my 4x2/6x2 I can take it with me to the attic. But if I want to cut plywood sheet I take it to the cellar and run it through my home made bench. I agree that if I made living of woodworking, furniture to be precise, than fine but in most of the cases owners of such table saw know what they doing. You do not just spend £500 because you like it. Usually at this price point you know what you want/need and what issues you may ensounter.

@brianmurray667

2 жыл бұрын

Awful lot of guys on here producing fantastic builds with a job site saw. Look around and you’ll be amazed.

@andyboybennett

2 жыл бұрын

There are several good reasons to buy this saw. Price, size, portability. It's a solid, precise saw. I can't do everything with it that I could with a full-size saw, but for what I need it for, it's great. Mine is on a small stand, but I will be building a larger stand for it soon.

@RLLWoodworks

2 жыл бұрын

Agree, thanks Andrew! Would love to upgrade some day but for now this is a great saw.

You screw the wrong direction on many pocket screws.... Speaking of design flaws.

@RLLWoodworks

2 жыл бұрын

They seem to be holding up okay. Thanks for watching!!

@swapshots4427

2 жыл бұрын

@@RLLWoodworks made my first cabinet today. Glad no one was watching. half of what will be two cabinets joined by tablesaw center shelf.

@swapshots4427

2 жыл бұрын

I could not find my New Kreg pocket hole jig, never used. So winged it without.

@RLLWoodworks

2 жыл бұрын

That’s sounds awesome! How big is your saw? I like the kreg jig but still use face screws plenty. Stronger IMO. I hope you find it!

lol nice crocks

@RLLWoodworks

Жыл бұрын

Love my shop crocs

Vá se lascar, gosto de vídeos com falação não 🙄 fui ✌️

@RLLWoodworks

3 жыл бұрын

Thank you!

your end screen cards are very annoying

@RLLWoodworks

Жыл бұрын

Sorry youtube just picks whatever they want

Lil' tip.....straight men don't wear Crocs

@DesconectadoOaxaca

2 жыл бұрын

Insecure men make comments just like this

Thumbs down for the annoying talk thru

@RLLWoodworks

3 ай бұрын

Sorry

that’s pretty nifty

@RLLWoodworks

3 жыл бұрын

Thank you!!