Thank you so much for uploading this! I was having a hard time finding someone who did a step by step guide for the exact AliExpress model I purchased! Sending love from japan❤

Love this Jake, excellent video as always and genuinely useful getting these comparisons when there are so many screens on the market. Funny that they often use select/L/R because I've been playing a lot of STEPPER and it uses select and L/R for its main control system! So I'm making a GBA with the FunnyPlaying touchpads only my main GBA for that one haha

@VinnytotheK

10 ай бұрын

It's JoeBleeps! 😲

amazing kit best one out there just installed mine with soldering points and is amazing! thank you for this video and guide.

This video is so clutch, Thanks!

The shell compatibility is so annoying. I hate the feeling of finding a cool shell, only to realize it won’t work with my IPS kit. All that aside, this looks like an awesome kit

@JakeSimmons

Жыл бұрын

Yeah it would be nice to just have everything fit the original shell

awesome video and very helpful , thanks!

Love your stuff! FYI the color pallet options are helpful for the visually impaired. ✌🏽

Any reason to not just cut the touch sensor wires off?

it seems like the part that separated from your LCD was just the protective housing. they tend to have a plastic frame and foil backing that protects the panel itself. So that plastic frame probably just came separated from the panel which is laminated to the glass.

Great video! I've become skeptical about touch pads though. The first GBA I owned had two touch pads for brightness and palette. I don't know the brand and haven't really tried to find out (could be a CGS). However, after half a year, the palette pad just randomly activates, or gets stuck on a colour.

2:12 The color pallet thing could be beneficial for people with color blindness I think.

Thanks for this review just ordered my screen hopefully it’s as easy as it looks lol

Great guide

How are these IPS screens perform under sunlight/outdoors ?

from some of the other videos of this kit i’ve seen, it looks like the screen is somewhat regressed, and if you have it at certain angles small bits of the edges cut off. i was wondering if the funny playing kit had something similar or if none of it was cut off reguardless of the angle

great video, thanks . i received that kit at home looks great with regular cartridges but its giving me issues with Az , does anyone had the same problem? any solutions?

2:20 Color Pallettes is not dumb! There are some people who have problems with color. Like my friend who loves retro gaming. He has a problem with bright colors especially Neons. Even brightness adjustment can't do anything with his problem. When he saw some reviews about color palettes in gameboys, he didn't hesitate to buy those gameboy screen kits. He prefer the purple and pink palettes for those are not causing him headaches. Sometimes those kit were made by choice or intentional maybe for some people with those kinds of problem.

Killer video ! Got one

I have the exact same kit. I cannot screw the gameboy down. Neither the mainboard nor the case. It clips in at the bottom, but not the top. Every screw, even the ones from the original case wont work and are hard to screw down to a point where the board feels like breaking. I really dont now whatto do, ive been trying for days

I tried this kit. Main issue is the L and R shoulder buttons feel a bit too loose and the shell doesn't seem to close tight enough no matter how much I tighten the screws and I'm afraid of stripping the screws if I try to tighten it further.

Do you know if there are any shells compatible with this screen besides the ones you can buy with it on their aliexpress shop (without trimming)?

I've been watching your videos for some time now and you helped me a ton on my quest to build my first macro, it's time for me to try doing an IPS screen mod, just bought it from the link on the description

@just_ugu

Жыл бұрын

Just came back to say I did it, and almost everything went well 😅

@ratzpop

11 ай бұрын

@@just_uguwhat didn’t? 😅

@just_ugu

11 ай бұрын

@@ratzpop nothing major, it's just that the shoulder buttons and side pieces I bought didn't initially fit, but later I was able to make them fit with some trimming, and the left shoulder button is a little bit lower and doesn't have good feedback when pressing, but I was afraid of making it worse if I replaced with an aftermarket one, so regarding the screen kit it went 100% well!

So what shells are made to fit these particular screens?

Sorry if this is a noob question but is it possible to just tuck away the touch pads in a position that keeps them from being activated, instead of removing them entirely?

So my shell unfortunately broke and i was wondering how difficult it is to rehouse the ips display into a new shell after already installing. Does it just slide out like it slid in?

Did you trim a shell or did you buy one compatible with this screen? If so, from where? Can we see a video of you trimming? The provided image of what to trim is actually 0 help to me.

The hole under the sticker is used to adjust the screen btw

thanks man, i just used this guide to install this mod! my first time soldering and it turned out perfectly! though my shell came with a damaged battery cover which is very annoying, hopefully their customer service can give me a new one...

Is the pixel grid effect on this one a real grid? The FP IPS V3 kit doesn't integer scale on the horizontal axis, so its pixel "grid" effect is actually just scanlines.

Do you have issues with the menu in game? I just installed mine but have trouble unless it’s at start screen

So if I go the non solder route is it not possible to turn frame blending on and off?

@JakeSimmons

2 ай бұрын

I don’t think so

Just starting the modding gba scene I have a really nice near mint silver and a beat of clear one I intend to mod.

Love your content 😊 I'm thinking of buying a screen for my GBA & GBA SP i wanted to ask what's the best screen for each device currently available in 2023? There's so many different names & versions it's a little overwhelming for me lol, also i wanted to ask does the newer V5 screens higher resolution show or is it not worth it? I couldn't find a video of anyone going in to detail about the that aspect, everyone usually just shows the screen & talk about the colours & modes etc.. I've also read some don't do integer scaling for GB/GBC so I'm a little overwhelmed & confused.

@JakeSimmons

Жыл бұрын

Working on a GBA IPS Kit round up video but it still might be a month or so before I can post it

does the funny playing rechargeable battery fit in the hispeedido shell?

Were can you find the shell that would work for this kit? I can’t find it

Can you just desolder the sensors itself and not the entire wire connecting the sensors to the board?

I bought one pre modded but it didn’t say what screen it has. It also has HDMI out but how do I know if I can add scan lines? The screen has the touch brightness with 10 levels and palette changes but that’s all I know.

@JakeSimmons

Жыл бұрын

Honestly I have no idea

What happens If I just cut the wires for the touch screen

Just yesterday i bought a second GBA to mod (i didnt want to mess around with my original Glacial handheld), and want to keep the original shell and all hardware - its a Fuschia Pink one and i have a lot of nostalgia with those two colors at Toys r Us. It sounds like this screen is compatible with original shells with some trimming... to what extent do you need to trim? Is it obvious what needs to be cut? Ive never modded anything before so would like to be as prepared as possible

@JakeSimmons

Жыл бұрын

If you look at the AliExpress listing I have in the description, it has a picture guide of how much you need to trim and file

Jake what shells work with this and where can I get my hands on them in Europe? Already ordered my screen from zedlabs today!

@JakeSimmons

Жыл бұрын

The pre trimmed shells will be listed soon on Zedlabz but you can use pretty much any shell, if you’re willing to try trimming. Just can’t use funnyplaying’s laminated shells

@theowner4508

Жыл бұрын

@@JakeSimmons I've now ordered everything from zedlabs :) They got a me a shell early. Looking forward to building the whole thing in a week or so when everything arrives

Thanks for the video. Just started soldering. Should I be using flux sparingly on these? I heard it was corrosive?

@JakeSimmons

Жыл бұрын

No! If you buy no clean flux you will be fine but I have never heard of it being corrosive. I just like to clean it up because it’s sticky. Definitely use flux!

What shell would you recommend for this in the time being if there isn't one specifically made for the screen? I was just about to do a funnyplaying screen mode but might pick this up instead.

@JakeSimmons

Жыл бұрын

I’d either buy it with a shell from the AliExpress link or wait and buy it from ZedLabz when they get the listing going. Or if you’re willing to try trimming, you can do that to pretty much any GBA shell that isn’t funnyplaying’s laminated kit shell

Man im not mad im just annoyed with the shell compatibility i bougjt this skyfer the sky dragon shell then i watched uour video and now im nervous when my shell and screen gets here im hoping it works well

Okay that pdx shell is too sick

Would just chopping off the wires be better than unsoldering them?

I take it there is no way to swap the lens at all with this mod?

Thank it works

Ok now I’ve got a very important question…. Do you still have the option to play full screen when you read a GBC game using L & R ??

@JakeSimmons

Ай бұрын

Yup that’s built in to the GBA cpu so that will always be a thing

Nice I just order it thanks

The Cloud Game Store laminated gba screen is an awesome one too

Amazing video! But I cannot stop having problems with L & R. No matter where I solder them, one or both always have problems!

@JakeSimmons

29 күн бұрын

Hit up the help section in my discord server with more context and pics. Hopefully I or someone else can help

How do you feel about the buttons with these? I was seeing some comments talking about bad button quality.

@JakeSimmons

Жыл бұрын

All the buttons feel the same to me. Sometimes they just have duds when it comes to membranes

Hey Jake, can you do a video of trimming an OEM shell for this mod kid?

Thanks for this review I just bought a kit. Im new to the gba modding scene. If i choose to go the solderless route what am I missing out on exactly?

@JakeSimmons

7 ай бұрын

No menu for the options is really all you miss. Touch pads just really suck imo

@pasqualerizzo5654

7 ай бұрын

@@JakeSimmons I guess I have no choice I've never soldered before and I definitely don't want to damage anything. Hopefully the touch pads are not too much of a pain. Thanks for the info!!

I'm looking to use the OEM indigo shell. Will the drop in v5 look as good as the laminated v5?

@JakeSimmons

Ай бұрын

Yup!

Are there any downsides of the laminated screen? I have a normal drop in and now I found out that there are laminated screens and I'm not sure if I should buy a laminated one

@JakeSimmons

4 ай бұрын

If you already have a modded screen, there’s no need to upgrade

@bittehelfensiemir6708

4 ай бұрын

@@JakeSimmons okay thank you!

The main problem with the FunnyPlaying v3 kit is the high failure rate. I've build dozen of the V2 GBAs without a single problem, but four out of ten V3 displays where broken or had vertical lines after a few hours of gameplay! And the v3 shells are fragile, don't tighten the screws to hard or they will break!

@JakeSimmons

Жыл бұрын

Couldn’t have said it better myself

@pspsmallz

Жыл бұрын

Was that your experience with only their laminated ips kits? Was interested in getting their laminated tft version but if it has similar issues I might just get this kit or the cloud game store laminated kit instead.

@JakeSimmons

Жыл бұрын

@@pspsmallz haven’t tried their laminated ita kit but it’s just a DSi screen so it should be fine. I just hate funnyplaying’s laminated shells. They are garbage

@ratzpop

11 ай бұрын

@@JakeSimmonsyou mean the shells you have to buy for easy fit with the 3.0 laminated IPS screen? If so: how are they bad?

@JakeSimmons

11 ай бұрын

@@ratzpop I would go watch my video on that kit or wait a couple weeks when I explain it all again in my IPS Kit comparison video I’m working on. It’s too much to write out

So I just completed my GBA laminated screen v5 from hispeedio. Everything seemed good until like an hour later and the brightness setting would not work right. The right and left bumpers wouldn’t increase or decrease the brightness and I couldn’t cycle the other options. Then after a minute it just started cycling through all the options. I’m a little discouraged at the moment so any help would be appreciated. Note I opted for the soldered version.

@JakeSimmons

5 ай бұрын

My best guess without seeing it is that something is bridging. I would double check that your solder job isn’t touching anything else around it and/or you didn’t pinch any of the wires when you put the shell together. It’s very common for those things to happen and cause the brightness controls to either not work or go crazy. Especially double check that you solder to the correct pins on L and R and that your select wire isn’t touching any of the vias (tiny holes) around tp2. Hope this helps!

@MsJom123

5 ай бұрын

@@JakeSimmons alright I’ll check those out after work. I’ve noticed if I haven’t played in a bit that everything starts working properly again. Then after about twenty minutes it goes haywire again. Not sure if the heat from the motherboard is causing the solder to expand somewhere and bridge maybe and then when it cools it’s good until it heats up again… I’m clearly just throwing spaghetti at the wall with this theory. Even so, have you seen anything like that anywhere?

@JakeSimmons

5 ай бұрын

@@MsJom123 your hands would but if that were the case😅 I’m gonna guess you’ve got a wire pinched

I am having trouble with all screws going into the highspeedido shell. Is anyone else having or had this issue? Looking for advice. If I put anymore force into them I’ll strip the screws. Tried both oem and screws that came with shell.

@JakeSimmons

9 ай бұрын

What size bit are you using? It might be too small

@mattguy7405

9 ай бұрын

@@JakeSimmons I was using the two that came with the V5 kit. Going to pick up some better screw drivers tomorrow and try that out

Would there be any issues from me modding it to have an IPS screen and use a flash card? Since its an old console would it just strain it too much and destroy whatever lifespan is left of it? Will battery life be too poor on the default brightness? [no soldering experience] _ i was thinking about buying the hispeed kit and was worried my gba's just too old for using this and a flash card

@JakeSimmons

Жыл бұрын

I use a flash cart and it’s fine. Slightly less battery life but there are solderless drop in rechargeable battery mods that will help with that

@albim6100

Жыл бұрын

Solderless drop in rechargeable battery mods? That sounds crazy. That's good i mean I've had my GBA for like over 20 years so my main concern is it just getting too strained from using an IPS screen. But in fairness it hasnt been used in like 15 years. I just dont want to buy it and suddenly my gba's just too old to function

Can you remove the metal shield(behind screen) after sticking in to the front shell? I'm planning to use touchpads and if they go wrong, I'll solder wires to the motherboard. I hope that we don't need to pull off screen from the shell to just remove metal shield behind the screen.

@JakeSimmons

6 ай бұрын

After installing a bunch on these, I just install the touch pads because it’s difficult to remove the shielding. They aren’t very sensitive so you probably won’t have any issues of them accidentally going off as long as you don’t place them where you commonly touch the game boy. But to answer question, yes you can remove the shielding after, it’s just gonna be a lot harder while it’s stuck to the shell

@HSTVizle

6 ай бұрын

@@JakeSimmons Thanks! I just recieved my GBA and IPS/Shell set today. I've installed pads directly and one at the top(color option) doesn't even detect over the plastic shell, actually it is totally ok for me. Brightness controller works perfectly beneath screen lens. I hope they stay like this forever lol

I just had this mod kit last week It seems perfect but there is an issue with the power led It keeps flickering all the time. I tried with the regular lcd and it doesnt happen. I think Ips screen consumes too much power that leads to this flicker.

@Hayden_M_Kearney

9 ай бұрын

Dirty power switch + low voltage batteries (NiMh)? These IPS screens suck a lot of power. Clean the switch first, if it persists then swap batteries to 1.5v AA (assuming you’re not already).

I’m looking into getting an IPS mod, but battery life is a concern. What’s the battery like on this?

@JakeSimmons

11 ай бұрын

I would watch this video :-) kzread.info/dash/bejne/fI2Zs9WmoqnJopM.html

Can you do a video without soldering?

Where did you get the blue mat you use in your videos?

@JakeSimmons

Жыл бұрын

Check the tools I use link in the description!

Wouldn't it be possible to remove the PCB from the display using a small string? I want to do this sometime but I am really concerned about soldering on top of the display

@JakeSimmons

11 ай бұрын

It’s gotta be possible to remove it, but I’m not sure how sticky the tape is. You might end up damaging it before getting the chance to solder :/ If you use flux and don’t put heat on the board/screen for more than a second at a time, you should be fine. Flux helps so much

@suilenroc4997

11 ай бұрын

@@JakeSimmons alright, thank you!

@elministerr

7 ай бұрын

hmm maybe something like a coin act as an heatsink would help to not heat the pcb up and damage the screen ?@@JakeSimmons

maybe put the screen on top a pack of ice to chill it before soldering ?

Are these laminated ips screen better than the regular ips v2 screen?

@JakeSimmons

Жыл бұрын

I give my thoughts on this in the first half of the video

Very nice video. Can this screen be used with a Boxy Pixel aluminum shell?

@JakeSimmons

3 ай бұрын

Not the laminated version

I know might had been mention hispeedido kit plastic or glass?

@JakeSimmons

4 ай бұрын

Glass!

I did the part at 6:40 to remove the touch pads and I kinda regret it, now there are a few light leaks (visible only when the screen is fully black), probably because things moved a little when removing the shielding and putting it back on. If you do this mod, I'd advise against doing this part, just cut the wire with scissors if you don't want the pads

@GuillinCorp

6 ай бұрын

Thanks for the advice

Do you have to hold all three buttons at the same time to access the OSD menu or is it like funny playing where you only have to hold down select?

@JakeSimmons

4 ай бұрын

Hold select, then press L and R

@ChewyChicken589

4 ай бұрын

@@JakeSimmons oh OK. Thank you. I like how it's not just select.

@ChewyChicken589

4 ай бұрын

​@@JakeSimmons I have another question, what temperature do you recommend setting the soldering iron to so that it's hot enough to melt the solder but it's not so hot that it damages the screen? I will be using leaded solder

@JakeSimmons

4 ай бұрын

@@ChewyChicken589 leaded solder will melt at a lower temperature than lead free. I use lead free and usually solder at 300°C. I’m not sure how low it melts but you can always test by pushing solder into the tip while testing different temps (with the iron not touching anything else) but google says it can melt as low as 180°C. Hope this helps

I ordered this kit from them but I was dissapointed to find they don't seem to do a compatible shell in the Glacier color (the original clear blueish color). They didn't have names for the colors either so I just chose color "16" as it looked the closest to the original color I am looking for but it could just be plain clear and not Glacier. It's hard to tell from the pictures cus the lighting varies from shell to shell in the pictures.

@JakeSimmons

10 ай бұрын

Yeah AliExpress listings are never the best :/

@Notpoop906

9 ай бұрын

@@JakeSimmons Turns out it was just a standard clear / frosted shell lol. Not too bothered it was only an extra 5 bucks ontop of the LCD price. I have found a Glacier shell on Amazon so I'll just use my Dremel to trim it down. I've got one of those flexible extensions for the Dremel that I've used for very similar things so I'm confident I'll do a better job than the Aliexpress guys did on the shell they provided. The shell that came with the LCD V5 kit wasn't great. You could see where they had trimmed it themselves before sending it out.

Cant I just cut out the touch pads

This is the best one

Quick question. The package includes a Glass Panel Screen len. Do you have to put it on? Or is it okay without it?

@JakeSimmons

3 ай бұрын

The glass lens is laminated to the screen

@AdolfoAguilarVideos

3 ай бұрын

@@JakeSimmonsNice. Thanks for answering. I modded my first console and I really liked the outcome. Awesome video!!

I put the screen in and soldered everything. For some reason my gba doesn’t read gba games but gbc/gb it reads fine

@JakeSimmons

3 ай бұрын

There’s a switch in the cart slot that might be stuck or dirty. It gets pushed down when you put in original carts to switch the voltage. It’s supposed to spring back up when you remove the game and shouldn’t be touched by GBA games because there’s a notch in the cartridge

@sadworldwelivein2218

3 ай бұрын

@@JakeSimmons I see, thank you. I got it to work. Put a little bit of WD-40 and pushed it with a q tips and it started to read. Thank you for responding man 🙏🙏🙏

I just received my second v5 pre laminated in white. I sent the first back because of bleeding in the upper left half (a nice long line). Well, the second has exactly the same problem. Hispeedidio store said „this is normal with the white lense“. Well, then I'll pass… Very disappointing :/

Can you cut the touch pads off instead of soldering them off

@JakeSimmons

Жыл бұрын

Yes but you need to make sure that the end of the wire isn’t touching any metal or any parts of the edges of the shell. The wires still act as a touch pad, just with less surface area

One simple question: Where can I get that shirt. I love the direct message to Nintendo! hahahaha

@JakeSimmons

5 ай бұрын

My website! retroremastered.com

Wait so is the Alixpress link the same kit as the one you're showing?

@JakeSimmons

10 ай бұрын

Yup

@VinnytotheK

10 ай бұрын

@@JakeSimmons Thanks for responding, I ended up getting two kits, two USB-C battery kits, and a knockoff Everdrive 64!

@VinnytotheK

9 ай бұрын

@@JakeSimmons Finally got the kits in, and they're alright, but the buttons were sadly too small and quite loose. Ended up just using the original buttons and D-pad. Plus the pastic is pretty brittle, I tore through the battery panel while doing that bottom screw, left a bump on the front of the Gameboy too sadly. That's likely due to this being my first reshelling.

Do you know if this will work on the Extremerate IPS ready GBA shell?

@JakeSimmons

3 ай бұрын

It will not

@Apersonwhoexists137

3 ай бұрын

@@JakeSimmons will it fit in the original shell if I do a little trimming?

@JakeSimmons

3 ай бұрын

@@Apersonwhoexists137 a lot of trimming yes kzread.info/dash/bejne/dKiCtbGcmMXFidY.html

@Apersonwhoexists137

3 ай бұрын

@@JakeSimmons sorry for asking so many questions, but is there any other ways to purchase the screen other than Aliexpress, ZedLabz, or Retro Game Repair Shop?

@JakeSimmons

3 ай бұрын

@@Apersonwhoexists137 not that I’m aware of

So… i just installed the screen and suddenly the color started changing seemingly at random. Started looking around for causes and solutions until you mentioned the touch pads. Turns out touching the top of my Advance SP at a certain point makes it change colors. I laughed so hard. Thank you!

@JakeSimmons

10 ай бұрын

Gotta love touch sensors haha

So can this kit be used with any shell? (can it be use with default shells)

@MasterBuller

4 ай бұрын

according to the manufacturer's youtube channel, yes

I know Ladda when I see Ladda. Long live Ikea

i feel like changing the color palette on these only makes sense for colorblind people or people who want to play OG gameboy games on their Advance and still have the og look.

I just cut my touch pad wires, didn’t feel like messing with it lol

@aaslandyo9584

3 ай бұрын

Did it do the trick? Every other electronic I have been in contact with this is by far the easiest lol. Would like to get a real answer to why I would want to desolder it if anyone else care to explain 🙂

I want to buy one of your modded gbas on your website but it doesn’t say if the gbas u modded have this same exact screen. Can you clarify?

@JakeSimmons

8 ай бұрын

If the title says laminated, it’s this screen. Otherwise it’s the v2 from hispeedido. Adding more stock very soon

@slydeslyde3625

8 ай бұрын

@@JakeSimmons ok cool thanks

@slydeslyde3625

8 ай бұрын

⁠@@JakeSimmonsHi again. Any idea how soon exactly you’ll update stock? Kinda wanna buy one asap lol 😂 but I want to make sure I buy from someone who has good experience. All good if you can’t answer that question.

@JakeSimmons

8 ай бұрын

@@slydeslyde3625 everything is now currently up!

@slydeslyde3625

8 ай бұрын

@@JakeSimmons got one! Thank you!

I know a guy whos got that constanly pressed R button you mentioned, what would you recommend to him to do? how you fixed it when it happened to you? everything looks fine on the board, btw that guy is me 😂

@JakeSimmons

Жыл бұрын

Haha do you have the L and R wires soldered to the test pads? If so, I’d solder them to the pins on the back like I did in this video. If not, make sure the wires aren’t pinched when everything is shut and make sure you’re soldered to the correct spot. If you’re soldered to ground, that’s gonna cause it to constantly be pressed

I just did it took me like 2 hours

I think the gba kits with color palettes are for when you play game boy games on it maybe

@JakeSimmons

Жыл бұрын

Yeah but they have their own color palettes on the game boys with color screens

@Legatus_cubing

Жыл бұрын

@@JakeSimmons oh yea that's fair, I completely forgot they did

@James_D.

Жыл бұрын

It’s because makho asked for an unsaturated color mode to replicate the original colors of the GBA games, however these Chinese companies who manufacture them didn’t understand what he meant. So here we are… with ten unnecessary color modes. 😅

what is the difference of pre laminated and not laminated. because i want to buy the aluminom shell from boxi pixel i dont know if i got the laminated because the description on the aluminom shell it doesnt fit

yooooo send me one of those V2s! im trying to mod a GBA and a GBC but i lack money

These things seem so hit or miss it’s crazy. Some of them work great, some high light bleed, fitment issues, flicker, stop working after some time, weird power issues, etc. I think we all need to realize it’s just Chinese junk at the end of the day so it may or may not work as intended.

2:23 well i don't think that's dumb bc anyone could want to play some gbc games on their gba

Isn't this kit kinda gimmicky? The IPS V2 has allways worked and with a perfect 4x screen looks perfekt. Dont know what this one exactly brings to the table more than being laminated?

Am 20 years to late

4:50 Who cares what color the membranes are? You’re not going to see them once you close up the system.

@JakeSimmons

11 ай бұрын

Having all the buttons match except start and select is pretty lame. That’s why I said that. Start and select are all membrane

@Falcon-um7vo

11 ай бұрын

@@JakeSimmons I thought there was a yellow start/select in the bag with the yellow buttons (near the bottom of the bag in the video).

I had a bit of faith in this video until the “it’s better than funnyplaying” quip at the end, plus the fact you’re an affiliated partner with these guys. Obviously you’re going to recommend their product if you’re getting paid for it. But to try to put down the competition as well? That one comment was enough for me to go directly to Handheld Legends and hit “add to cart” on the funnyplaying IPS kit

I can't think of a comment