Thank you for being the old video on KZread who takes odd the manifold 👍🏻. I finally feel like I'll be able to tackle this now

Best video on this topic ever, nice job. 👍👍

@CarsForPaul

6 ай бұрын

Glad you liked it

Very well explained and shot, Paul. Well done from Australia. I have already installed a catch can on my Mk1 225 TT but it's mounted lower down on the battery case. I will be changing the mounting point to what you have just demonstrated because it's more accessible and a cleaner, simpler install.

I came across this video a few weeks ago and today i decided i was gonna give it my full attention.I called Cloud 9 customs today.The chap called me back.Very helpful indeed.My friends working on my newly acquired 225 Quattro as its had air leaks under the manifold.Watching this video makes a lot of sense.It simplifys the system.Great video.I will be ordering this kit from Cloud 9 Customs.

Wow what a refreshing YT video actually showing us how to carry out a mod without been too long or boring. Most YT videos are just constant FFwd and poor video camera location. Thanks for a awesome video that makes it possible for enthusiasts to carry out the same mod.

@CarsForPaul

3 жыл бұрын

Glad you enjoyed!

@keterpay2379

3 жыл бұрын

YYeah was RREally fun to watch this YT video

Thankyou for your thorough informative catch can instruction guide. Simply brilliant.

@CarsForPaul

2 жыл бұрын

Glad it was helpful!

great work Paul,, enjoying this project

Great video mate. Thanks a lot for this! Got my TT after my Dad died and he did all the work himself, I am not mechanically minded at all so this helps me a lot!

Great video! Very clear on installation instructions

After watching your “how too” vblog, I would definitely undertake that job. Well done mate.

@CarsForPaul

3 жыл бұрын

Thanks 👍

Trying to figure this out on my 1998 audi a4 v6 30v supercharged .Thanks for the upload very clear easy to follow

@CarsForPaul

3 жыл бұрын

Glad it helped

Well done and making good progress.

Dude amazing video thank you so much you are a life saver ❤️ so in depth even under the Manifold showing everything absolutely amazing 👏 other people that make DIY videos need to take notes 📝

@CarsForPaul

2 жыл бұрын

You're very welcome!

nice one Paul very informative .

This video is amazing thank you.

Thanks for a very interesting vlog Paul as always take care and keep well

@CarsForPaul

3 жыл бұрын

Thanks 👍

nice vid Paul this helped me fit mine

Excellent vid.be using this when i do mine

Nice one exactly the way I did mine great how to buddy 👍🏼😎

Very nice installation and very clear instructions thank you 😊

@CarsForPaul

11 ай бұрын

Glad it was helpful!

Nice work Paul very well explained 👍

@CarsForPaul

3 жыл бұрын

Thanks 👍

brilliant job there paul and what a nice build.

@CarsForPaul

3 жыл бұрын

Thanks

Thanks Paul, great video. Tip for cutting the rubber pipes, I use a large sharp kitchen knife, smear some washing up liquid over the blade and around the rubber pipe and it cuts through like butter with nice clean cut. The washing up liquid stops the friction when you cut causing the blade to jump about.

@CarsForPaul

3 жыл бұрын

Great tip.

@boastyy

3 жыл бұрын

@@CarsForPaul Thanks Paul.

it's a great kit, fitted to my 225

Great video and my next project

good 2 see u back man keep up the good work ..........

@CarsForPaul

3 жыл бұрын

Thanks, will do!

you were right, this was a very good comprehensive video for install. Thanks mate 👍

@CarsForPaul

9 ай бұрын

No problem 👍

Good job Paul. Think you 🙏🙏🙏

best explanation..ty..i was ready buy a new turbo i thing that faild because oil before of it..hope fix it

Need a how to like this for the MK2 now :)

Thanks alot

Brilliant.. much clearer than other videos 👍 Don't know why people have thumbed down this??

@CarsForPaul

2 жыл бұрын

Glad it was helpful!

@blakkno666

2 жыл бұрын

@@CarsForPaul ordered my cloud can today. Will be using your vid for reference 👍

Hi, and thanx for this nice vid. I’ve just seen on my can ( not installed yet, and same model ) that the grid inside is on the other way ! There are two screws to invert the position. So, not sure now if this grid must under the output :/

great video mate , what size are the crimp clips do you know , cheers

How often do you have to clean the catch can out? What do you do with whatever comes out of there?

Great video! The previous owner “installed” a junk Amazon can and deleted the sai. He also tossed the puck. Do I need the puck, or can I run the outlet directly into the turbo inlet? Thanks

Never hear the term jubilee clip. I like it

All good

What's the song in the video called Paul please

Hi after watching your video I've just brought a cloud 9 oil catch can kit I can't seem to find a garage to fit it I live in London do you have any suggestions please

My TT is remapped with decat, miltek exhaust, and Piper x filter. After doing mods I was getting around 27.5 mpg. When it was standard I got 30mpg. Did this catch can install and now getting 31.5mpg approximately! Must be to do with the car breathing better... Definitely worth doing... Has anyone else had better mpg after fitting?

@Bigbird7171

Жыл бұрын

I'm getting the kit I'll let you know if it does

Enjoyed video,but curious on the benefits of catch can....Just got my first 225 tt..Thanks...

@markmuller8829

3 жыл бұрын

The benefits of the catch can on a 225 TT is the removal of the OE spaghetti piping (that Paul showed after he removed it) of the PCV system to prevent vacuum leak problems that are hard to find and fix with the intake manifold in place. The OE PCV spaghetti piping is a complicated mix of hard plastic pipes, soft rubber pipes, one way valves and a Y Venturi valve. After 20 odd years of running a hot turbo engine bay, these pipes will disintegrate, crack, split and cause all kinds of symptoms to make your TT run badly. Doing the catch can mod Paul demonstrated will prevent all of this, is much easier to check & maintain and will let your crankcase breath much better, with excess oil vapour either being caught in the catch can or burnt up as it gets reinjected into the turbo via the TIP (which is what happens in the stock setup also). Hope that explains it...... Well worth doing!

Thanks Paul great vid. I've got an 04' Roadster myself, but its the 180. Do you know if the mod is the same on the 180?

@CarsForPaul

3 жыл бұрын

Yes it is

@paulsimpson2232

2 жыл бұрын

@@CarsForPaul Paul you say it's the same but happens with the non return valve for the brake boost assist ?

Donde consigo el conector con la entrada para la manguera

do you plug all the vacume connections underneath manifold? or do we leave them open?

I need to replace rear calipers, hoses, power brake booster, and all brake and clutch hydraulics on my buddy’s MK1 TT FWD. Is it a horrible pain in the ass to do the clutch line and the brake hydraulics?

Paul there again well explained and loved the clips far better look. Will it make any difference to performance?

@CarsForPaul

3 жыл бұрын

No, but there is a lot less pipework and no oil spraying over the engine

@blakkno666

2 жыл бұрын

If you have pcv leaks you may notice better performance as not losing boost

Hi Paul, im trying to get the metal valve replacement and the bump plug for the manifold. Where can I get it and what's the name for this parts? Thank you

Hi Paul great vid. I look to u as the Audi man. I have a headlight problem on a Audi TT 150 halogen headlight were as the adjuster motor is kaput. Is this repairable or is it a new headlight? Cheers

@CarsForPaul

3 жыл бұрын

Might be cheaper to get a secondhand one from Ebay

super

I've looked into this and a major problem today is not all parts are available from Audi. A small amount of pipe work before and after the divert regulating valve is available and costs £104 + vat the remainder of pipe work and non return valves are no longer available So this option may be the next best thing ... There are cheaper items if this kit on eBay but not sure of the quality .so if anyone else has used one . Pls reply with feedback .

You will have alot of crank case pressure. Need suction

Is there an alternative for the kit in the us?

@CarsForPaul

9 ай бұрын

Not that am aware of

Apparently that way is the worst way to install a catch can, should have another t piece coming off the hockey puck, one way pcv valve fitted and reconnect to the nipple on the intake instead of blocking off.

Manda um pra mim de brinde kkkk

Good info on the install! Too many adds thou.

👍🤔👍👍👍👍👍👍

What’s happening with Copart the prices are ridiculously high at the moment !!!

@CarsForPaul

3 жыл бұрын

This is caused by demand

@andrewtognola1116

3 жыл бұрын

The problem being is that there is no profit left in them , I only buy Mini’s but I am finding it hard to get anything for a decent price .☹️

@CarsForPaul

3 жыл бұрын

@@andrewtognola1116 this has also pushed up the prices of second hand car too, but it is the main reason why I buy cars for just me rather than to sell on

why do you need to fit a catch can when the makers does not feel one is needed when it went down the production line

@CarsForPaul

3 жыл бұрын

Gets rid of the additional pipeworks which breaks down after a while

@marktyler2396

3 жыл бұрын

@@CarsForPaul pipework is there for a purpose what scares me is audi has spent millions on development to get the cars working right but you come along in your garage thinking you can do a better job

@anthonynewcome128

3 жыл бұрын

@@marktyler2396 if you saw the crap that ends up in the can, from factory that would end up in the puck and the turbo inlet pipe,

@JamesYT19

3 жыл бұрын

The purpose of a catch can is to catch escaped vapour/gas due to piston blow by. On all ICE gas escapes past the pistons/rings and creates pressure in the crank case( more so when the engine is fitted with a turbo) Normally this gas or vapour is routed to the inlet manifold and burnt off. When a catch can is fitted the idea is any oil residue that gets mixed with the vapour in the crank case is captured hence the term catch can. The advantage is it avoids fouling the the inlet valves and manifold and a cleaner burn/combustion. In my opinion a waste of time unless fitted to a brand new or rebuilt engine as on a old engine the damage has already occurred and a retro fitted catch can will not magically fix that. I've never heard of fitting a catch can to get rid of pipe work, it would be a lot cheaper and easier to replace any faulty breather pipes.

@keterpay2379

3 жыл бұрын

@@marktyler2396 Its a old tt. He just wants to declutter the bay and make it look nice. Hes got a brand new one, dont think he cares about audi's techs 20 odd years ago

🤔😁

Brasil,rio de janeiro,cep 21240-40

Great video Paul But a complete waste of time fitting this to a 20 year old engine. The damage has already been done with the amount of sludge that has built up in the engine over the years its like telling a 70 year old to stop smoking the damage to his airways have already been done . If you where doing a complete engine rebuild then its a good idea , I have had 4 audis with this engine in it

@CarsForPaul

3 жыл бұрын

Good feedback Phil, for me, I did this to get rid of the excessive and broken pipework thus stopping oil spraying in the engine bay.