Hey guys! Thank yall for checking this how to out! If yall don’t feel confident enough after this video, message me on instagram @jackstandbuilds to get a quote on this job or any other LS/LT performance needs!

@dwanarmbrester4468

3 ай бұрын

What cam did you go with ,stage 2 or 3

@rafaelvega6907

Ай бұрын

where are you located

Bro made this shit look so quick & easy, i thought hey its a 47 minute video this should take me no more than 4-6 hours & here i am 10 hours in just getting the heads off, everything's been done the right way so far though & its all thanks to this vid

@ThrowingWrenches-ce6qe

4 ай бұрын

That’s pretty sad

@user-qr3oy7bf7r

4 ай бұрын

@@ThrowingWrenches-ce6qeman some people just cant do this type of work quickly like others can

@cochiloco7974

4 ай бұрын

@@user-qr3oy7bf7rit wasn’t even done in one day and he had help when he was taking off the heads that job was easily 8 hours

@michaelwallace1242

3 ай бұрын

😂​@@ThrowingWrenches-ce6qe

@vamoneygroup

3 ай бұрын

​@@user-qr3oy7bf7r I think it's about have decent tools. Some dudes don't have power tools

Man this is the only video I could find where they don’t time lapse the actual tear down and assembly, very in depth. I’m bookmarking this for when my cam comes in 💯💪🏽

Nicely done man. I can't express how much this really helps. Bout to do this in the driveway and just seeing the specialty tools really helps.

Great vid, thanks for posting. It's been a while since I've torn an engine down, to bare block, and this brought back good memories. I've been thinking about camming my 5.3 sierra, you might have just pushed me over the fence. Thanks bud, appreciate all you put into this.

Why doesn’t this channel have more subscribers! You make this look so easy bro good job !

Bro really took apart the whole engine with one hand!!! THANK YOU SIR! Great video!

Excellent job! Absolutely the best how to for an LS cam swap project. My parts are on order and I will definitely have this on the iPad sitting in the fender well while I do the swap.

One of the best DIY videos on YT!! 👍🏾👍🏾 straight forward no steps skipped

@toranowatson7551

5 ай бұрын

Only 1 step missed.... Installing the harmonic balancer b4 tightening the timing cover bolts. Leave the bolts loose to allow the harmonic b oil Seal to center around the balancer then tighten timing cover. This helps to prevent leaks prematurely

Just the video I needed man and it was very in depth from start to finish man and I definitely appreciate this video for sure 👍🏾

this was great to watch i watched it then installed my cam kit iover the weekend!!

my cam will be here soon! definitely think i can put it in after watching! great video!

Great job bro , very well explained, great camera views 🙏🏾👍🏾

Great Video bro... Keep it up, I look forward to seeing more of your work.

interesting video, love the balancer put back lol Many important sequences for heads, rockers, front seal, torques for put back was omitted.

Man I really appreciate vids like this in depth of how to do sum that normally u can’t find anyone on YT that does it step by step like he did it 😎💪🔥🔥

Great job and great insight for the beginner like me that prefer to do things myself to make sure it's done right and less costly towards my projects..thank you for taking the time to share 🏆 🏆 🏆 🏆 🏆 🏆 🏆 🏆 🏆 🏆

Very well Done buddy. I thought this video would be filled w distractions like the funny ROOSTER. Fun & made to watch. Great job. Please do a video on how to truly set top dead center some day or direct us to a current video u have on that subject. Thx again

Glad I found this channel ! Real men working on an engine!!! To much soy on u tube!

Bruhhhhh u did that like u was teaching a class. 🔥🔥🔥👍🏻👍🏻🔥👍🏻👍🏻🔥

I’m watching this the day after the Super Bowl and when he mentioned the Super Bowl i was like no way he uploaded this today 😂

@nameless36900

5 ай бұрын

Im watching this the day of the superbowl

@coreyhall237

5 ай бұрын

@@nameless36900came to say the same thing😂

@CoTyCj

5 ай бұрын

Weird watching this the day after the Super Bowl 😂

@03mach281

4 ай бұрын

L ll❤😂😂 lI

Like the video and all the explanation and all, hope to be able to do this one day and be able to open up my shop keep up the good work shout out from phx az

AWESOME video!!! Best one I’ve seen. Thank you for this

best diy POV ive seen on hoe to do this...now we just need one on a the rebuild for 5.3

excelente trabajo, y la forma de explicar, me gusto mucho, gracias por compartir tus conocimientos, te mando un saludo desde tijuana

learned alot. Great Video. Doing a cam swap on my 06 silverado

I had to watch this , been waiting for a vid lol

Great video. It sounds amazing! Two questions, what cam kit and do you have to take heads off do this job.

Watching this on the Friday after Super Bowl 2024. Crazy!

This video is the best of the best, very specific thanks

i usually do radiator and water pump first before i start anything up top that could leak down into the engine i dont want

Great group of friends...

Definitely got my sub and like. Good job guys

Please detail and maker for camshaft and valve springs and where you picked up. TY good show.

Im doing a cam swap aswell, i have the timing chain dot to dot, does the harmonic balancer have to go in any specific way to not throw off timing? ( mine only has 3 holes as "markings")Thanks

Nice job! So tell me, how do you fix the high lift cam making the engine run rich?

Very good video dude. I’m confused on why the idle wasn’t more of a clean chop. Is that due to needing tuned after cam install?

Thanks i have a 05 avalanche 5.3 and wanted to do this great video

Helped my uncle with his cam swap and had to take his oil pump off too had hard time trying to take that bolt off bottom of oil pump😂

Best video on here! Ty!

What I appreciate is you show the things that people don't like "oh this clip right here is pose to be just like this" like dawg u a real one and u did this in great detail ima come back to this video when I need it for mine I got a salvage youkon for 800 and it got front end damage the engine is fine but the rad and the peice that holds the rad is fucked definitely need new side panels on the front and a new grill and bumper but it's cool tho because the biggest bonus with this car it has all the wire for a big music system already installed so I definitely will make the most out of this car I do love it alot

Learned something today! Thanks

If you work on others vehicles how much would you charge for a cam install with new springs and rods ?

How about the transmission torque converter does that needs to be change too ?

Cool video, was there any PCM tuning required after the Cam install? Thanks!

what cam did you install you did good telling step by step.

Best vid out there 👌

Great video. Is the Gen V LT version of this video taken down? Was the best LT tear down vid on KZread.

Great video!. Subscribed

You deserve a follow

Excellent work!!!

Cool work man 👍

It's sounds good too I'd love to do this to my 05 avalanche

What head gaskets are those sir? Also you just put them in dry no sealant correct?

well done young man!

do you need to tune the truck? After cam, lifters, intake?

Video was hella worth it thanks

Great video! 👍🏽

What cam did you use and I would have changed out for new timing chain and put new new pump

great video! gonna try and cam my denali! thank you

Great video.!! Keep it up.!!!

what determines if you need different valves for clearance?

Great video I'm confident I can fo that, how much horse power did it gain

Do you know whats the biggest size cam i can add to my 4.8 on my Silverado without changing out my stall

Awesome video !!

appreciate it went step by step 💯💯🗣️

Good job fellas

This is excellent content!

No torque sequences bro? Also doest the truck automatically go to TDC once turned off

What type of spring compressor do u have bro?

Good video for easy install on a cam

I cammed a 5.3 I got fuel spark but not start u think my timing is off ?

Did you get the heads re surfaced at a shop? You mentioned something about them in the video but just to be sure

what cam did you use and are you willing to do it again? I have a blown head gasket and ticks for the first couple min on cold start only. 04 Silverado with 5.3L in Jacksonville Fl area. - lol

Nice job 👏. What stage cam is that?

What was the lobe separation on this cam?

Best one I've seen yet. The only thing I disagree with is the crank pulley install. Otherwise very good video. Keep up the good work.

@mikeharo3528

5 ай бұрын

Nevermind the angle grinder to the head

@wellthatdidntwork

4 ай бұрын

Both of those methods are super sketch but good job other than that bro.

@davidkirchner579

3 ай бұрын

yea only prob i thought of was the air hammer the thrust washer lol

Gonna do this once I have a house and motorcycle

What exhaust is that? Sounds great!!

Serious though, what cam did you purchase for this and was it stock size?

Did you have to use a torque wrench any?

Great video👍🏾

So is tuning afterwards not necessary at all?

Damn son.... You made that looks easy. Wish me luck !

@osoquanrunnit4372

4 ай бұрын

How'd it go

@dougsweldingfabrication953

4 ай бұрын

@@osoquanrunnit4372 It did not go as smoothly as his did. I took my time, and took some pictures for reference, but I still fought it. It's back together and runs good. But I would definitely let someone else do it for me if I was to do it again.

what cam kit did you do. no tune etc

Great video. Thank you very much.

You didn't need to tune the truck with the new cam?

Good job young buck!

Wat kinda cam was that. And where did you get it from?

Doe anything need to be torqued down?

What kind of can u put back in?

can i do this onna 2010 yukon wit 5.3? to get rid of afm

Great 🎉 video!!

Gdamn didn’t know it you had to take down the whole thing. I’m not a car guy btw. Always wondered how people install cams. How much would it cost to get a cam installed?

thats a sick yukon

Yo did u have to get it tuned after?

What's the cam you used sounds nice

Badass video thank you man

I need this done. What do you charge to do this job?

Was those the heads that came off that motor ....it doesn't look like it