Here is a look at my 2015 Freightliner (Mercedes) Sprinter. This thing built from the wheels up as the ultimate mountain bike travel rig. #vanlife #vantour #sprintervan #sprinterbuild
Жүктеу.....
Пікірлер: 24
@johnhouston8297 Жыл бұрын
Great setup, thanks for the tour.
@travelingtheUSA Жыл бұрын
Sick build 🤘 What bed lift did you use? Thanks
@lucacadianalbert Жыл бұрын
Damn that is a sweet setup. Is you dad a carpenter by trade? that's some pretty nice work he/you did. Thanks for the tour
@luca_cometti
Жыл бұрын
His dad did construction, so he learned a lot from him, but he’s and electrical engineer by day! Just loves working with wood
@ethanwright95967 ай бұрын
Can you make a video on how you made your wheel rack?
@lukepardi Жыл бұрын
Any template or guidance available on the standup bike racks? they look super sturdy!
@luca_cometti
Жыл бұрын
We sort of just made them on our own, tracing the general shape of the wheel, to hold the tire in place and using 1x1 pieces of wood to space it out and brace it
@d4drift123 Жыл бұрын
nice setup, care to share where you got the linear actuators from? And which specic size model? Thanks for any info
@luca_cometti
Жыл бұрын
These are the ones: Homend DC12V 10inch Stroke Linear... www.amazon.com/dp/B07HNTHYQ1?ref=ppx_pop_mob_ap_share
@d4drift123
Жыл бұрын
@@luca_cometti Thanks!
@90evermore09 Жыл бұрын
Thanks for the tour! Very cool van! I’m looking for a system like you have for carrying bikes attached to the van. What brand is from, can you share a link? Thanks man!
@luca_cometti
Жыл бұрын
Hey! sorry on the late reply. its is a Backswing and stage 2 from Yakima Racks.
@90evermore09
Жыл бұрын
@@luca_cometti hey! No probs, thanks for the info!
@elmicha5521 Жыл бұрын
How is the bed suspended on the left site, since there are only actuators visible on the right side? Very nice setup, thoug.
@luca_cometti
Жыл бұрын
Cheers! it pull up through the cabinets
@yoterryh_JTH Жыл бұрын
Nice van, very cool. Is that eBike a Canyon Spectral? I have a Spectral on CF8. I would need something to remember to not lower the bed with bikes in place so you won't wanna break something? Finally, slight cringe at your pronunciation of "Yakima" 😅 but really nice job on the van!
@luca_cometti
Жыл бұрын
Luckily it lowers nice and slow and even if it’s hits the bars a little bit it just compresses the suspension. Maybe I’ve been saying it wrong this whole time🫣
@Trueace2100011 ай бұрын
Cool you don't have to take front wheel off for bikes... Built the bed up high enough.
@eprohoda Жыл бұрын
guy~outstanding channle,
@luca_cometti
Жыл бұрын
cheers!
@maxlen234 Жыл бұрын
Have you had issue with the length of the van? What's the gas-mileage?
@luca_cometti
Жыл бұрын
Sometimes it's a bit tight to park, but with the driving I do, and where I live, its usually not to bad as a daily driver. On the freeway I average around 20 or so
@dodgechristopher Жыл бұрын
I’ve seen a lot of builds but that’s the perfect layout for my needs. Want to convert my Sprinter? Or sell me yours! 😊
@luca_cometti
Жыл бұрын
Thanks! It was hard to find an inspiration for this build, so hopefully a video like this will help get some ideas going for people. I am going to hold onto it for now, but hopefully sell it in the next year or so to still try and make a bit of a profit on it!
Пікірлер: 24
Great setup, thanks for the tour.
Sick build 🤘 What bed lift did you use? Thanks
Damn that is a sweet setup. Is you dad a carpenter by trade? that's some pretty nice work he/you did. Thanks for the tour
@luca_cometti
Жыл бұрын
His dad did construction, so he learned a lot from him, but he’s and electrical engineer by day! Just loves working with wood
Can you make a video on how you made your wheel rack?
Any template or guidance available on the standup bike racks? they look super sturdy!
@luca_cometti
Жыл бұрын
We sort of just made them on our own, tracing the general shape of the wheel, to hold the tire in place and using 1x1 pieces of wood to space it out and brace it
nice setup, care to share where you got the linear actuators from? And which specic size model? Thanks for any info
@luca_cometti
Жыл бұрын
These are the ones: Homend DC12V 10inch Stroke Linear... www.amazon.com/dp/B07HNTHYQ1?ref=ppx_pop_mob_ap_share
@d4drift123
Жыл бұрын
@@luca_cometti Thanks!
Thanks for the tour! Very cool van! I’m looking for a system like you have for carrying bikes attached to the van. What brand is from, can you share a link? Thanks man!
@luca_cometti
Жыл бұрын
Hey! sorry on the late reply. its is a Backswing and stage 2 from Yakima Racks.
@90evermore09
Жыл бұрын
@@luca_cometti hey! No probs, thanks for the info!
How is the bed suspended on the left site, since there are only actuators visible on the right side? Very nice setup, thoug.
@luca_cometti
Жыл бұрын
Cheers! it pull up through the cabinets
Nice van, very cool. Is that eBike a Canyon Spectral? I have a Spectral on CF8. I would need something to remember to not lower the bed with bikes in place so you won't wanna break something? Finally, slight cringe at your pronunciation of "Yakima" 😅 but really nice job on the van!
@luca_cometti
Жыл бұрын
Luckily it lowers nice and slow and even if it’s hits the bars a little bit it just compresses the suspension. Maybe I’ve been saying it wrong this whole time🫣
Cool you don't have to take front wheel off for bikes... Built the bed up high enough.
guy~outstanding channle,
@luca_cometti
Жыл бұрын
cheers!
Have you had issue with the length of the van? What's the gas-mileage?
@luca_cometti
Жыл бұрын
Sometimes it's a bit tight to park, but with the driving I do, and where I live, its usually not to bad as a daily driver. On the freeway I average around 20 or so
I’ve seen a lot of builds but that’s the perfect layout for my needs. Want to convert my Sprinter? Or sell me yours! 😊
@luca_cometti
Жыл бұрын
Thanks! It was hard to find an inspiration for this build, so hopefully a video like this will help get some ideas going for people. I am going to hold onto it for now, but hopefully sell it in the next year or so to still try and make a bit of a profit on it!