i was tying to take a poop and then i came across this video and he calmed me and help me to get it all out thankyou fot the help

@PeterGlennSports

6 ай бұрын

Just like scraping your board. Even though it’s a crappy job and it can take a while, you just need to breathe and take your time. And when you’re done you’ll feel soooo relieved!

@BoehSpam

6 ай бұрын

I am also on the toilet watching this video. Don’t know why this video attracts poppie heads

@PeterGlennSports

6 ай бұрын

@@BoehSpam Gotta go with the flow 🤷‍♂

@hazmatite

6 ай бұрын

um. there's a trend happening here. just sayin. 😳

@PeterGlennSports

6 ай бұрын

@@hazmatite This will be out #2 video of all time (no matter how many views it gets).

Some people strongly recommend to loosen/remove bindings to make the job easier and avoid dimples from the screws in the base while hot waxing.

@PeterGlennSports

5 ай бұрын

Thats mainly for scraping the board. Any dimples in the base from over tightening the screws are 9 times out of 10 still going to be there slightly when you take the bindings off and you will still have to scrape into them with the corner of your scraper. So technically yes it will be a little easier to scrape but I personally don't think its worth the extra trouble. Up to you though.

@sweetj16real

5 ай бұрын

@@PeterGlennSports Thanks for the info. Maybe do a tuning vid next. A lot of people including myself unclear on edge tuning. Considering some people only do the side edge and not the base edge.

@PeterGlennSports

5 ай бұрын

@@sweetj16real Don't worry my friend, weve got lots more vids coming! Theres a "de-tune" video coming tomorrow and a "tune" video in the near future!

It seems to be faster to heat up the bar and then rub it than just to drip it. It also seems to spread it much more even. After that of course use the iron. Is that a good method?

@PeterGlennSports

5 ай бұрын

Depending on the heat it could be, but the time you save is minimal so up to you 👍

Can you damage your base by scraping with too much pressure on the straight edge of the scraper?

@PeterGlennSports

6 ай бұрын

I suppose you could but you would have to be putting an unusual amount of pressure on the base. It doesn’t take much to scrape the wax

I don’t have the brush , is it ok ? My final step would be the scraper since I don’t have the brush and I’m going riding tomorrow.

@PeterGlennSports

5 ай бұрын

Yeah, you’ll be good. The buffing is a good thing to do but not a must. Having the board completely scraped it more important 👍

Hey maybe when I try to send a video to my wife about how I need to wax my board can you say “you must buy a full wax kit to keep your board in good shape” how am I supposed to buy extra junk if videos say “you don’t need to get a wax iron” huh huh huh?

@PeterGlennSports

22 сағат бұрын

@@knowledgeiskings 😝

how do you feel about infrared?

@PeterGlennSports

6 ай бұрын

HAHA, so random. I just saw that like 2 hours ago, I'm super skeptical about how effective it really is. We have a video going live on the 31st about "easy wax methods" that are still not as good as a hot wax, but good to use when theres a time constraint. I basically do the exact same thing in that video with a $50 wax iron instead of a $250 IR machine. 😆🤷‍♂

@peterglennsports How to scrape a Bataleon-board with 3BT?

@PeterGlennSports

3 ай бұрын

15:36

@renemeegdes3117

3 ай бұрын

​​@@PeterGlennSports15.36....ok, but this board is not a Bataleon-board with 3BT...right?

@PeterGlennSports

3 ай бұрын

@@renemeegdes3117 it’s not but Matt talks about the technique to scrape “boards with 3D shaping” at that point

Im kind of afraid to hot wax my go to board but i might gove it a whirl on my old beginner board 😂

@PeterGlennSports

4 ай бұрын

Not a bad idea to start quite honestly. You'll find if you follow all the tips in this video that it really isn't too hard. Good Luck!

What brushes do you have?

@PeterGlennSports

5 ай бұрын

A few random ones I got from my last employer 😆 not sure what brand they are exactly

@robertoloza5692

5 ай бұрын

@@PeterGlennSports 🤣 what would you recommend for buffing as far as a brush?

@PeterGlennSports

5 ай бұрын

@@robertoloza5692 Swix actually has a great brush combo. I really like a cork buffer too, just don’t have one right now. www.peterglenn.com/product/swix-4f-combi-brush

14:45 Me doin this shit in my carpeted living room with a tarp covering it 😆

@PeterGlennSports

5 ай бұрын

LOL

Isn’t it just better to take the bindings off completely?

@PeterGlennSports

6 ай бұрын

It doesn’t matter. Only reason to do it is if you don’t have a tall enough workspace for your bindings when you flip it upside down

NEED MORE SPEED.

@PeterGlennSports

6 ай бұрын

Always!