haha 05:00 "let's do it" and then the hardest part is cut out :DDDD

do you know if that waterblock works with the asus rog strix 4090 oc edition as well?

Thank you so much for doing this. I'm getting ready to do a Hyte Y60 case, asus 4090 OC, 13900 on an MSI MPG Z790 Edge WiFi board with EK's Quantum blocks. I do have 1 question. I have the 120mm fans for the top with Radiator and the 140mm fans with Radiator for the side. Is there additional fan & Radiator addition you'd recommend on this, or is the case limiting? Thanks.

Thank you for clarifying you dont need to put a water cooler on the asus strix 4090. I just ordered the white oc edition when i saw it back in stock and I was worried on the temps with people reddit talking about 4090 temps, but I didnt take into consideration they were mainly all older versions. In regards to cooling my PC and CPU I was going to get a NZXT Kraken 360 Elite liquid cooler for my CPU and then 10 lian li uni fans sl infinity 120 rgb in a lian lia evo dynamic or xl case. Will this be enough to properly cool my CPU, GPU, Motherboard, etc? Do I need to get a 420 liquid cooler for my CPU and do you have any brands you could recommend? Does an XL case help better with air flow in your experience? Lastly, I saw someone mention water cooling your ram. I dont play on doing that unless its absolutely necessary. Any recommendation for keeping my ram cool? I appreciate your response on the matter.

Tuning down the music would make this video amazing

Love the content brother 🙏🏽🙏🏽🙏🏽 if I won the giveaway I’d 100% play Red Dead Redemption 2 for sure, so keen to try that game out. Keep up the great work ❤

@WiredHardware Great video but need help - I put the same block on my 4090 Strix all is well. However, I managed to knock the RGB connector off the stock cooler/wire. I can't make out the wire order/color from your video - do you still have the stock cooler and could take a close up photo of the 4-pin (but 3 wire) RGB connector on the stock cooler? Thanks!

@WiredHardware

6 ай бұрын

Yes I do

@WiredHardware

6 ай бұрын

Send me your email

Nice video and really good Video Quality

Looks like a character outta GTA Vice City

@WiredHardware

Жыл бұрын

I appreciate the compliment 😅

Hey, can I remove the black part with EK logo on it, at one end of the block? This unnecessary part makes the block longer and I don't like it at all! I want to cut the whole part starts from the Vector 2 trapezoid to the end

What is the size of the GPU in comparison to the stock size after installing the EK water block?

How the heck do you remove the board from the fans and all that mine is stuck

@WiredHardware

Жыл бұрын

I know, use some force and separate them. It’s because of the pre-applied thermal pads. But ensure that you unplug the 3 fans cables attached from the cooler to the PCB. Try to separate little by little from each side until you feel like it’s coming off.

@ViperFox_

Жыл бұрын

@@WiredHardware thanks for the comment. It’s kinda hard using some force on a $2500 gpu lol especially when it’s ur first build haha but I got it eventually. Great video!

how many mobos and gpus do u need .. 😄

Thats awesome man. Do you think they will be making an active backplate kit like the 3090 or is it needed?

@WiredHardware

Жыл бұрын

They do already make one for it. Not really, but if you want extreme cooling and you’re an enthusiast then of course!

@Josh-vu4sb

Жыл бұрын

@@WiredHardware Did they ever solve the problems with the connectors on the 4090 series?

@WiredHardware

Жыл бұрын

@@Josh-vu4sb they addressed that a month or two ago. It was regarding the 3x8-pin connectors Nvidia were shipping with the cards.

I love your videos

@WiredHardware

Жыл бұрын

Much appreciated 😁

@SiphonLOL

Жыл бұрын

@@WiredHardwareI have a question I just built my pc, after every restart it takes me to the bios. How can I fix that?

@SlavchoNaidenov

Жыл бұрын

@@SiphonLOL you should set first boot to be from the system hard drive.

Hello, I am a 3D designer. I was trying to design this same card with a realistic image. Unfortunately, in some places in the card, I cannot find images with which I can complete the design. Can you help me by giving me some images? I will be very thankful. I am doing a full computer 3D project, and this is part of the project.

Only reason I watched this was to see how you went getting the PCB off the cooler. Completely skipped 😑

@WiredHardware

7 ай бұрын

Dude I know! Trust me I was so bummed I didn’t get that footage in. But look, all I can tell you is it’s gonna feel like it’s stuck, but just gently pull off, the thermal pads and paste hold it tight on there, so don’t be worried to give it a good yank.

@AlanGresham

7 ай бұрын

@@WiredHardware it’s all good my man. It can’t be easy to get good footage of the gnarly parts of the job. I just got mine apart. A few minutes with the hairdryer and it came apart quite nicely. Heatkiller going on after dinner. Then eight hours of cleaning and tube bending tomorrow 🙄

@WiredHardware

7 ай бұрын

@@AlanGresham niiiiicee! Smart. Hey man, sounds like you got a nice project for tomorrow. Enjoy bro bro

The filter is too much.

No offense... But this is not a good video.