SHOPPING FOR A NEW TRACTOR ATTACHMENT? CHECK US OUT! WE SHIP TRACTOR ATTACHMENTS ALL ACROSS THE USA EVERY DAY! www.goodworkstractors.com WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! 5% OFF WITH CODE GWT AT 247PARTS.COM www.247parts.com 10% OFF WITH CODE GWT AT OUTBACK WRAP! www.outbackwrap.com 5% OFF WITH CODE GWT AT MUDD'S CUSTOMS! www.muddscustoms.com 5% OFF WITH CODE GWT AT JU FAB WORKS! www.jufabworks.com 5% OFF WITH CODE GWT ON SELECT PRODUCTS AT SUMMIT HYDRAULICS! www.summit-hydraulics.com 5% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us/store 5% OFF WITH CODE GWT AT 511 DESIGNS (CUSTOM GRILLS): www.5elevendesignz.com 5% OFF WITH CODE GWT AT TRACTOR PTO LINK! tractorptolink.com 5% OFF WITH CODE GWT AT YARD GLIDER! www.yardglider.com 5% OFF WITH CODE GWT ON TRACTOR FLOORMATS! www.tractormat.com 5% OFF WITH CODE GWT ON HYDRAULIC SAFETY! www.hoseendchamer.com 5% OFF WITH CODE GWT ON PROTERO DUMP SYSTEMS! www.proteroinc.com 5% OFF WITH CODE GWT ON SWEEP-ALL SWEEPERS! www.sweep-all.com 5% OFF WITH CODE GWT AT MILLER TIRE! www.millertire.com 5% OFF WITH CODE GWT AT BIG TOOL RACK! http:www.bigtoolrack.com 5% OFF WITH CODE GWT AT HEAVY HITCH! www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

@TheRealRenn

2 жыл бұрын

Edited to correct Mfg locations: Any thoughts on the “Zetor” compact tractors? I guess the compacts are made in Korea along with many other brands, and the large industrial versions made in Czechoslovakia but can't find much info on them.

@johnmerry18

2 жыл бұрын

+

@felixrodriguez480

2 жыл бұрын

What do you think of the Massey Ferguson 1825E?

@Rattlerjake1

Жыл бұрын

So you say 5 worst tractors but you only give us 3!

@GoodWorksTractors

Жыл бұрын

@@Rattlerjake1 It's types of tractors, the 3 specific models are bonuses. It's very clear if you listen.

I bought my farm off foreclosure and the old owner sold me the equipment. A JD 4310 was in the mix but it has a push blade instead of a loader. Took me years to find an affordable tractor with a loader, a 4610 with a backhoe! I never realized how all around useful a front bucket would be. Best piece of equipment..

Love my Kioti 3510 SE. it has a great lift capacity dual rear remotes that were not add ones and a front hook up for my grapple. Skid steer attachment ready and Daedong is a great diesel engine. Thousand’s cheaper than some of the others and a lot more tractor for the money. You gotta give one a look if your serious about getting a tractor !!!

Great information. As an old Ford and Alis user since the 1970s (learned how to drive on an 8N...and plow fields at the same time) and a current Kubota owner, you really break it down quickly. Thank you!

All good advice. Tried keeping an older tractor (1978 IH 574) to use around the property for mowing, driveway work, etc. Unless you use them every day, they quickly become a maintenance and dependability problem. I couldn't use mine every day and my "Old Farmer" wrenching skills had faded long ago. It left the property and a 2015 JD 4052 (w/ FEL!) took its place. I -- and my knuckles -- do not regret the change.

@GoodWorksTractors

2 жыл бұрын

Thanks for sharing your experience Mike!

Always enjoy your videos. I owned a 2305 for several years and performing maintenance on it was easy and had no problems. Now own a 1025R that I have some issues with. Hydraulic leaks, 3 point position control failure (John Deere stood behind their product and fixed) and the blasted breaking seat suspension (that John Deere says there are no issues with but the 2021 1025Rs have a much improved ,stronger seat suspension) but I still love my tractor. I encourage anyone new to tractors or buying a new model or brand to watch KZread channels like good works tractors and read related forums. There's lots of information on all Brands and models.

@soundman1402

2 жыл бұрын

My 3025E (2019) had 3 point position errors. I was able to fix it; there's a silver-colored metal shaft with two nuts on it that moves forward and backward when the rocker arms change position. This controls the other side of the hydraulic valve from the control lever. The nuts were loose, and so the tractor didn't accurately "know" the position. Manually pushed on the rod until the 3 point reached its max travel (the engine lugged, and I backed it off just until it didn't). Tightened the nuts down, and it was good to go. Thing is, they still come loose. Easy fix, just annoying.

@charlesfirstenberger8615

2 жыл бұрын

@@soundman1402 my 3 point issue turned out to be cut rock shaft cylinder o rings. Dealer and John Deere took care of it quickly now good to go. However, when the tractor came back there's a slight hydraulic leak at the sump screen fitting (o ring) dealer offered to come right out but it so small I told him not to worry about it until next service. But then I remembered that it just was serviced! Dang it!

As far as letting people know what tractors may have a history of problems, THAT, is actually a good thing! Other KZread vids have given the same tractors as example, and (since I'm looking for a good used 40hp tractor) that has given me the lead I needed to look up ANY problems on whatever tractor I'm interested in! Growing up on older tractors have taught me that trying to adapt hydraulics, live power pto, loader and all the other nice additions they were never built with, involves more in time and money than it is worth! Another GREAT video, Courtney! Your insights are helpful!

@ChaosAttractor13

11 ай бұрын

You may want to explore each companies “Right to Repair Policy” before looking for a fixer upper.

At the age of 9 I was tasked twice each year to plow 15 acres using a 1940 international model A with a single bottom plow. Learned how to be patient.

@sigitasp.3207

Жыл бұрын

Try doing it with the horse walking behind plow holding on to the handles, yes, not 15 acres, but....

@blackdandelion5549

Жыл бұрын

I was 12 yrs old and had a 1948 model. When people asked how I spent my time on weekends and after school I tell them they will find it very boring. In regards to the horses comment I would say "Who do you think was training them to do all of the work?". . .that would have been me. I was woken up way too early and taken to heard disbursement sales when farms were being foreclosed on and all of the livestock was going or remote auctions and I had to pick out what horses had decent conformation and minds to be worth loading in the trailer to take home. Then I had to train them and either sell or keep for their intended purpose based on body and mind. I had 1 horsepower!!!

We have owned a 2010 JD 2320 since it was new. It has been a true workhorse. I did cut a hole in the side panel to access the u-joint as the forum recommended. The only problem we have had is a dead battery some 5 years ago. Hopefully it will serve us well for years to come.

@vsteel

Жыл бұрын

If you are greasing the U-joint then it isn't a problem. the issue is they never said that it even existed in the manual and people didn't know to grease them. They tended to blow up around the 500 hour mark and when they went they took a lot of things with them and even if they didn't people had to move the engine to get the new U-joint in. I have a 2320 as well and it is a pain to get at it. I am thinking about cutting a hole in there because you have to take the bolts out of the dash and move it up to get to the steel cover plate to be able to get in there with a needle attachment. I have toyed with selling the tractor just for the pain of servicing it.

@chesterinflorida1567

6 ай бұрын

@@vsteel it’s not hard with factory u-joints with a long grease gun with a needle fitting. Even easier if the factory u-joints are replaced with a u-joint on the cap like a Moog 410 has (can get these for less than $30). And really the u-joint repair isn’t all that hard, just a little time consuming. The 2320 is such a nice small machine in its class. Ergonomics are spot on and it’s very capable. Yanmar made is Japan. This model will last a lifetime if properly cared for.

Thanks for another great video. I appreciate that even though you are a Kubota and John Deere fan, you pull no punches and show no bias in listing the tractors to avoid. The New Holland dealership we are dealing with is unfortunately 120 miles away, but living in an isolated community leaves little option.

@Harry-zz2oh

2 жыл бұрын

Frank, the economy is getting hard for small tractors. The local Kobota dealership closed up some months ago. They were in business were over 30 years, but the new tractors and parts are not readily available. Other dealerships in the area are John Deere, Case IH (but not compact or subcompact), and New Holland. I have a small Case IH 24DXe (24 hp) diesel equipped with the FEL. I've used it for over ten years but no longer need it; I got all my digging done.

Thanks for taking a position on these tractors. Most would not do that so it's a good thing your doing here. You may have just saved someone some serious money. Good job.

@louisnash4363

2 жыл бұрын

Thanks for your Honesty. You Sir are 1 of a kind . I'm in the market for a new tractor something around 40 to 50 HP. I was looking at LS d but now I just don't know. I love Jonh Deere but thar proprietary stuff burns 🔥 my Backside. I've thought about a Kubota but it don't think I need the mid pro because I have a giant Ferris Z turn that's been Flawless that suspension works and the cut is PERFECT. IF You but a Ferris z turn order the oem blades off ebay new you'll save a minimum of a $135 over dealer and same with belts and those caster wheels on the deck. I receive NOTHING from Ferris but if you're looking to buy a Great Z turn Try it and get the springy seat I didn't, and I wasn't forking out $899 at the time. The reason I even brought up the seat I don't think you Coffee would have A RIPPLE in it. It's great without the Cushion seat it would be just Awesome with it.

Good info thanks. My problem with tractor warranties, the dealers see you coming a mile away & they're ready to rumble (if you will) over not honoring your warranty. There's not much we can do but you better be prepared for a fight.

Greatful for your insight... JD dealer came to service my 4710 this AM . Starter not impinging on fly wheel after poping in a brand new battery after sub zero temperatures... looking at new tractors...very greatful for your INSIGHT...

"No loader, no deal." I couldn't agree more! When I told my Kioti dealer that I didn't require a loader, he assured me that I DID! In fact, he said if I didn't want my loader, six months in, he would buy it back.

@williamhaynes7089

2 жыл бұрын

I use my loader every day on my farm... i agree

@andrewdonohue1853

Жыл бұрын

i bought a used kubota BX2350 a few years back..... it didnt include a loader. i added one later, and found it to be very useful.

@BryanPAllen

Жыл бұрын

Sounds like he did you a big favor!

@user-tc4kk5zx9g

4 ай бұрын

Get the forks attachment. You'll use them more than the bucket.

@4x4Moses

3 ай бұрын

@@user-tc4kk5zx9g I bought pallet forks (my dealer calls them "poor man's grapple." They're very useful, but I use my Everything Attachments grapple more than anything!

Couldn't help but notice the "REMINGTON" tractor parts on the bench behind you. Some of those parts were hard to find for a while so we had better stock up on them when we find them. Great video BYW.

11 of 14min hearing bla bla bla fast talking before getting into subject

@excitationofstereocilia2103

4 ай бұрын

Thanks man!!!!!

@seanhammer6296

3 ай бұрын

I f.cking HATE that!!!😡

@douganddinsdalepiranha4391

3 ай бұрын

nothing fucks me of more than these promo blogs masquerading as something informative hosted by some guy who thinks that talking fast sounds smart. thanks for the heads up on where to start watching

@c0ldsh0w3r

Ай бұрын

This guy didn't even listen to the information being shared

@Forgottenson3934

21 күн бұрын

Didn’t exaggerate there

I live on a homestead where I still use my grandfathers 1947 International Farmall C every year for field work. Old thing will never die. Just put a new set of brake bands on her and she’s good to go again. Around the more civilized parts of the property I use a JD 2320 with an auger, front bucket, belly mower and snowblower. Luckily, the U-joint issue was discovered by my constant use of KZread several years ago. So I had the original u-joint replaced and now grease the new joint 2-3 times a year depending on how much and where we utilize the tractor. As my grandfather always said “The right amount of grease will keep a machine running forever.”

@ln5747

Жыл бұрын

How has it not rusted out?

Thanks. You make great videos and have really helped me learn about these 1025 class tractors. Got a kick out of the boxes of ammo in the background on your workbench.

Thanks for mentioning my JD790, haven’t had the opportunity to mow with it yet, also still looking for suitcase weights local to stabilize front end. Good video as usual!

I've had a JD 2305 for over 15yrs and had no problems with it. I do get it serviced regularly. Great tractor!

@trumbley22

Ай бұрын

Awesome! I'm happy to be picking up my first 2305 on Saturday. Only 468 hours!

This past summer I bought a 2007 Kubota b7610 with 480hrs for about 9400 CAD about 7500 USD. No loader but I think it was a good deal, my buddy is paying almost the same for a new motor in his BX that he rolled. I got it as dedicated 3 point attachment tractor, brush hog, tiller, rear blade etc and maybe pulling a trailer around once in a while. Needed it to have more ground clearance than my 1025r for my uneven and wet areas. Always a great start to my day with a Good works video.

I just watched the older video last night. Good info. I've considered turning the 1025r in for a 3E or 3D (3R is just a bit expensive right now) but I cannot get past the fixed loader and loader mounted joystick.

I bought 2 months ago a brand new 2022 Boncat ct2025 and I work it hard and have been super impressed. They're built much heavier and stronger than a comparable john deere. No complaints yet

Honestly I really like the 1025r and the 1023e, the problem with them is their transmissions. There's a very common problem with them leaking. Which takes about 20 hours to fix. This happens because they don't use gaskets, they use liquid loctite sealer. I'm not kidding about 5 out of 10 of them leak withing the first 100 hours or so. Just be very careful and always be looking for leaks so you can get it fixed before your warranty expires.

Another great video Just wanted to tell you that along with the 2305 John Deere, the John Deere 2210 also had the problems with the the driveshaft and I learned the hard way. Just something to look out for when buying one.

I am addicted to these videos. Based on the last video of what to avoid, I bought a kubota 2501. Couldn’t be happier. 3 hours moving snow just to get out of my driveway. Wouldn’t have made it without my tractor. It’s been a challenge finding implements for it. There is a huge market right now for cat 1. Keep them up Courtney. Thanks.

I didn't find your channel and website till after I bought my 1023e and your videos and overall love of your 1025r basically same tractor make me never second-guess buying that thing one of the best investment I ever made I'll have it for the rest of my life all the attachments are always be useful cost a bunch but only pay for them for a couple years and tractors are cool

Can't afford the green ones. If it has plastic fenders, hoods etc, keep it. The biggest thing most need to decide is how long can you wait to get it fixed. A production tractor vs a hobbyist can make some decisions easier. As I got older I knew it was getting dangerous to use a clutch, so I got a used hydro.

@balanced4harvest552

Жыл бұрын

I'm with you, on the NO Plastic Hoods especially! When you're lifting large chunks of Snowbanks out of the way with a Loader, there's inevitably going to be pieces that fall back onto the Hoods!

@andrewdonohue1853

Жыл бұрын

@@balanced4harvest552 i have a BX2350. it has been a decent tractor but the plastic fantastic isnt so fantastic. i treat the body panels like they are made out of eggshells

The yanmar diesels are some of the best diesels made. I’d much rather have a yanmar engine. than a John Deere engine.

@ShortArmStrongArm

2 жыл бұрын

I use a 425hp engine. Think i need green.

@rorschacht8478

2 жыл бұрын

I wish more equipment came with deutz engines. Arguably the most reliable engines to ever exist.

@isaiahj9827

2 жыл бұрын

John Deere owns yanmar, most of their small tractor engines are yanmar diesels....

@fuddrucker74

2 жыл бұрын

@@isaiahj9827 deere doesn't own yanmar. They have a production agreement. That's it. Yanmar Holdings owns yanmar. John Deere owns a john Deere. End of story.

@thesmartestmanintheworld2653

2 жыл бұрын

@@isaiahj9827 this

Thanks for making this video. I purchased a 2015 LS XG 3037 as my first tractor and I have to say that I traded it in last year for a red cab tractor with air conditioner which is great but I really miss my blue tractor because it never had to go back to the dealer for any failures and I put over 700 hours of land clearing and moving dirt with this little blue tractor. It had more than enough power to do anything I wanted it to do and believe me I was not nice to this tractor. Last year I got heat stroke twice while working on my property in Central Florida and for health reasons I had to make an upgrade but I wish I could have found a blue enclosed tractor with AC unfortunately during covid there were none to be found. Thanks always for your great videos and reviews.

@donjuan2509

11 ай бұрын

Have a LS.. great tractor.. never had a problem

I bought a jd 2320 October 2019, knew about the ujoint issue ahead of time. Deal was fantastic, selling dealer maintained and it was traded back to the selling dealer, which I bought it from. Ujoints had been done by said dealer, around 300 hours. I decided after much thought, I'd do them again last year, wasn't anything wrong with them, just figured it was cheap insurance. It's a fantastic tractor, if you are aware of this issue. I've had zero problems in the 2 years I've had it, and it hasn't been babied; this is my lawnmower, and whatever project workhorse.

@GoodWorksTractors

2 жыл бұрын

Awesome, glad to hear it. You bought it the right way in my opinion. Did your homework.

@jimolson8424

2 жыл бұрын

Did the new U- joints have grease zerks? I like to use a quality synthetic grease. I always ask for the best part i can buy.

@seanitaliano8759

2 жыл бұрын

@@jimolson8424 yes. Only downside is having to take the floorboard up to grease, minor inconvenience tho. It'll only need done once a year, use a quality grease, no worries.

@chesterinflorida1567

6 ай бұрын

@@seanitaliano8759 I can get to my grease fittings from the underside of my 2320. It’s tight and you need a long hard pipe on the grease gun to reach. I replaced my original u-joints with Moog 410’s. There are several similar. Napa has a 410 ujoint which is the same. The grease fitting is in one of the u-joint caps.

I appreciate anyone giving a heads up to a potential customer.

I work for kubota dealership and the b3350 is covered under warranty for the dpf and reformer, if you did your research about it you would know, however these are great tractors but it due to operators negligence of not running the machine correctly

@roymiller9241

2 жыл бұрын

I have a 3350 kubota won’t warranty it they stopped that at 400 hours

Thanks for the information. Nice to know what to avoid.

Good video. There are a lot of people in my area (mostly retired) who bought/buy t small hobby farm tractors with big ideas, and get very little if any use out of them. They can be five or ten years old and still look like new. The problem is is that they often just want too much for them. Can't agree more; always buy quick easy bullet proof detachable everything because lining up pins or just poor designs like in the old days sucks.

I’m really not in the market for a new tractor but, that sure is a great piece of information to have on hand for future ventures. Thanks for sharing.

Love your videos! I've learned so much. I would absolutely buy a tractor from you but I'm in Washington state! I will keep watching though. Thanks for all the great information!

@goodworktractors my dad has owned two Kubotas and there hasn't been any major issues. His first was a 2007 Kubota BX24 thing ran like a champ. Had that for 13 years he sold it to get the LX2610 that Kubota he has now is a beautiful machine.

Why don’t you just get to the 5 worst tractors

@GoodWorksTractors

2 жыл бұрын

1. Rental/Auction Tractors 2. Tractors without a loader 3. Old Tractors 4. Buying a tractor brand without a servicing dealer nearby 5. B3350/2320/2305 Tractors

This was very helpful and well communicated

If you're into 8n/9n fords(I am not!), you can buy every single part on them. Seems to me they were more trouble free than the modern tractors though. Keep the fluids changed, lube what needs lubed... make sure they get clean air. So unbelievably simple. I grew up on farmall and it's the same story. seems like more complex maintenance to me in the new stuff with hydro transmission, pollution control, etc. I went with IH B414 for our homestead because the engines were strong, dependable, common, and parts availability. They're not that hard to figure out if you have a book.

@swamp-yankee

2 жыл бұрын

I wouldn't buy a new tractor to save my life

@robbiefrentz9427

2 жыл бұрын

The tractor of death lol

@matthewtaylor2185

2 жыл бұрын

@@robbiefrentz9427 just don't hitch to the top link for drawbar work...and realize bad brakes are just a way of life.

@robbiefrentz9427

2 жыл бұрын

@@matthewtaylor2185 don’t forget the overrun clutch it drove me straight into a ditch lol.

@matthewtaylor2185

2 жыл бұрын

@@robbiefrentz9427 yeah, I'm not a big fan of over run clutches...I have used one with my 6ft bush hog on a farmall 230. It will let you stop, but changing gears is still a waiting game(at least with mine). I would rather have a drag behind bush hog rather than 3pt on old machines so you still have steering...then I am double cautious about what I drive the tractor into! Ha ha! Other than that they're great!

I had a 2005 Deere 2305 that was nearly flawless, it had one small issue with the throttle cable that was covered under warranty. I did all the maintenance myself, yearly, and just sold it this past May. I did hear there were transmission problems with some of the 2305 models, but I never experienced that issue either. I replaced it with a brand new 2025R that I had to wait about 3 months for. I love the size and weight of the new tractor, but the FEL doesn't seem as sturdy as the one from my 2305.

@MrCountrycuz

Жыл бұрын

the wiring of the 2305 looks like it was done by Chef Boyardee.

@TheFarmallfarmer

Жыл бұрын

My dad had a 2007 Kubota BX24 had that thing for 13 years with not one issue with it. Aside from the fuel filter jelling up when I was plowing my driveway and the two back tires blew out due to dry rot otherwise it ran like a champ. We had a hydraulic plow, a York rake, and front loader and back loader he got $18,500 for it.

@TheFarmallfarmer

Жыл бұрын

@@MrCountrycuz I'm not really a fan of the 2035 they do look pretty but not my go to farm tractor.

Love my RK24, it's a great cheap tractor. and my MFGC1715 is the perfect size for lawn mowing and love the front snowblower.

@GoodWorksTractors

2 жыл бұрын

Awesome, glad to hear it!

@jdub229r

2 жыл бұрын

Had a 2018 GC1705 with a loader, was a problem free little beast! Sold it with 260 hours to upgrade to a larger model. Looked at the MF 1825E, Kioti, & Bobcat… ended up buying a Kubota L2501HST. Super pleased. iMHO the JD 3E can’t compare to the 4 tractors I looked at & the one I ended up buying.

@ggarden8432

2 жыл бұрын

@@jdub229r I have to agree. I sold a GC2600 with almost 3000 hrs on it for $7000 just tractor and FEL. Nothing really wrong with it Bot it was time for a new one. My RK is just for moving manure and cleaning out the barn, I like the little bit of extra lift capability.

great video. I'm not looking for another tractor but I almost bought that Kubota a few years back. The dealer was the one to steer me away from it into another tractor.

I have a b3350 with cab, front loader and backhoe. I work that thing like it’s a red headed step child. The primary issues I’ve since disabled due to starting and staying running have all been related to safety switches. If you jump out the seat switch and the Hydostat trans pedals this will cure random non-start and dying when bouncing in seat. As for the DPF regen, if you run the motor above 2000 rpm you will seldom if ever need to do a park in place regen. If you live in a cold area and have issues you must remove an intake baffle to allow preheated intake air into the engine to keep dpf hot enough. A company in Poland sells a DPF delete kit but I think right now at 250 hours I don’t need it. If you get a deal on a low hour b3350, I’d take it. Mine was included with our house, if I ever leave it will go with me as the house appraisal is above the mortgage without a tractor. I look at it as $30k profit and a free toy to build sand castles all day long 😁😉🇺🇸🪵🚜

@rdbjr52

2 жыл бұрын

All true enough. I block the radiator in cold weather. Haven’t had a regen problem. But, I only operate it above 20 degrees F

Really like this KZread video and appreciate all the time you spend educating us about the equipment and tractor’s we have or are wanting to get. Or in some cases going to avoid these issues with. I’m very appreciative of your work and I really enjoy your videos. Never boring and always informative! Thank you!

LOVE the idea of this video! Thank you.

Thanks for input. Thanks for helping out.

Classic tractors are dirt simple to work on. If you are at all handy, they can be a good value. But be sure to use your skill to look it over before purchase. I bought a 1968 Ford 5000. Before I handed over the $$, I went over it carefully. Some of the electrics were in rough shape, but that's easy to fix. I knew I needed to rebuild the carb, and again, that is fairly easy. Big things like clutch, engine compression, etc. were all fine, so I knew it needed nothing major. In the end, I upgraded many things such as replacing the points with an electronic ignition, replacing all the lights with LEDs, and such. Paid $6k for the machine and put maybe another $1k into it. I now have a 67hp tractor that is built like a tank. I've already been offered $14k+ for it, so I know it's holding its value. But the real value is that I have a serious machine to do serious work. Oh, and New, Old, Stock (i.e. the parts) are not impacted by the Supply Chain issues. The 50yo radiator burst last winter and I had a new one at my door in 3 days. Yes, there are some parts that are hard to find like power steering cylinders and distributor caps, but I had researched this kind of stuff before hand.

in 2018 when we were looking at the subcompact tractors, I hadn't heard of TYM so I avoided them. Kubota was much too expensive, Kioti had a lackluster representation from the dealer so we narrowed it down to Deere or Massey. I wanted the tractor, loader, and backhoe only. Deere wanted $26k and would not change the backhoe to operate like an excavator stating it would void the warranty. Massey wanted $21K and re routed the hoses for my operating style, with no issues and full warranty. Obviously we went with Massey GC1710. Amazing and everything we need.

@fljetgator1833

2 жыл бұрын

🤔 help me understand what you mean when you say you wanted the backhoe to operate like an excavator. I am top notch hoe man. So please explain because I must be missing something. Thanks

@nvrancher

Жыл бұрын

TYM (Tong Yang Manufacturing) actually makes some Mahindra tractors. They bought out my favorite small hp tractor manufacturer, Kujukie from South Korea, marketed as Branson Tractors here in the USA. I have a 40 hp that is 20 years old and I use it daily. It is my rake tractor during hay season and brush hog, and pto log splitter the rest of the year. It has been a reliable machine. I also have a John Deere 2550 cab tractor for mowing and baleing. It's been good too.

@HoopleJBogart

Ай бұрын

My 2515H is a little beast, will out lift ANY thing in it's HP range.

@s.w.brodrick7216

26 күн бұрын

I bought a TYM 474..great tractor 500 hours, nothing but oil, filter. And grease. Shes a honey. Love the Tym compared to kubota. 474 is rock solid. It uses the cummins designed engine and has power to spare.

Wow you talk fast. Good info. I looked at the bobcat and LS for a while, even Massy Fergussen. I landed on the 1025R for John Deere innovation and dealer access. I am very satisfied with the choice I made. Keep up the "Good Works".

I have a rk55 year and half old 900 plus hours . Baled 598 round bales 1000lbs pound. I have not had one problem with this tractor at all .very good heat ,ac is a must if you want a good tractor I would buy again thank you all for your time!

Whether or not you need a loader depends on what you’re doing, and your budget. I ended up for going a front in loader and as a result with my same budget I was able to get a much bigger and stronger tractor. The main use I bought my tractor for was grading a quarter mile long dirt driveway. Had I got a much smaller tractor with a front and loader it never would’ve done the job, for example that rinky-dink little John Deere 1025. So in my case I’m very happy without it but I’m not saying that they aren’t useful it’s just a matter of. What do you need and how much money do you have.

I work on several tractors, and the parts prices on John Deere have went through the roof, they rape you at the parts counter, and watch the electronics, it breaks down it's gonna cost big. The one that impressed me has been the Kioti, bought one 29 years ago and it will out live me. Seen several issues with Kubota loaders and ring and pinions on the hydrostatic models.

@PoisonShot20

Ай бұрын

Lots of talk about parts price and availability for the Kioti and Mahindra. What us your opinion on it. The new tractors is like Mercedes Benz, look great, but full of junk parts, emissions control handcaped the manufactories. I'm having a second thought on buying new ones. I think 2018 and prior may be the best years.

@ronwest4522

Ай бұрын

The older tractors are far more dependable, electronics on the newer tractors and larger equipment may be cool when it works, but a nightmare when it quits, parts for John Deer are insane high, I needed some bearings and seals for the front drive hub on a mid sized JD, couldn't buy them,had to buy the entire assy, $5.200 dollars,it said made in India on the new part.

@PoisonShot20

Ай бұрын

@@ronwest4522 Wow! That hurts. At the end, after watching many YT videos, googlelinng, regarding all the brands, new kids on the block and all, my two choices are Kubota or New Holland. NH dealer nearby, 6 miles, been there for 80 years, and price. Kubota, reliable, no parts issues, the dealer is a little far, 40 minutes drive, but Kubota makes the tractors.

Great info. Thanks. 👍

AS A CITY BOY...THIS IS VERY VALUABLE INFORMATION...THANKS ...THIS IS GREAT!

Great video man super helpful. I have a small property and am considering a tractor/skid steer. Other than driving a newer Kubota and an older Bobcat I know jack squat about what to buy. Thank You!

Loved my Mahindra, but hated the parts situation. Parts just weren't available. Hopefully they've improved that, but we had to wait six weeks for some front axel seals. I sold it to a good friend at a serious discount and got at John Deere 1025R.

@treadhead

5 ай бұрын

HAD THE. SAME SITUATION DURING THE. EARLY DAYS. OF. COVID , VARIOUS DEALERS COULDN'T GET PARTS , CALLED MAHINDRA ------ DIDN'T GET ANYWHERE , TOLD THAT PART MAKERS CLOSED DOWN BECAUSE OF COVID . ***** MAYBE MAHINDRA SHOULD HAVE LET DEALERS DESIGNATE THEIR VARIOUS NEW TRACTORS AS **** PARTS TRACTORS -------- DEALERS REPLACING THOSE PARTS THEN LATER DISCOUNTING THOSE TRACTORS FOR SALE ???????? ***** TRADED MY MAHINDRA FOR ANOTHER BRAND .

Good stuff Cortney, while I don't know anything about Yanmar tractors I do like the Yanmar engines that John Deere contracted for the J.D. tractors. The first one I had was way back 1986. I bought a new compact J.D. 3025e with yet another Yanmar motor. Their awesome engines. I'm kinda interested in a Bobcat tractor. They seem to be a beefy machine with a lot of pep.

@FYMM69

2 жыл бұрын

After a year of research and many miles driving to different dealers, I settled on a good used 2019 Kioti CK2510HST with 190hrs instead of the CK2610HST I wanted but didn’t have in stock and I can’t get over how powerful and the amount of work the 2510 has done. Best of all, best in class by far, it’s lifting capacity. Kioti makes a helluva tractor

I know this video is 2 years old and I just bought my first Kubota but I was actually an engineer for the company that makes all the implements for the John Deere compact and subcompact tractors. yanmar does make the engines in the small John Deere's

Thank you for the awesome info.

My best advise is to purchase a tractor large enough to NOT have universal joints in the drive line. I know you think you need a small category 0 but you really don't. Go ahead and get a small category 1 with a solid drive line (no u joints).

I own a Kubota 31 Grand 4x4. Great tractor.Besides hydraulic repair on front end loader ,no leaks or problems .It’s like 15 years old or more .Fully auto

It was the 80’s through about 2006 that deere used yanmar for compacts. 755/855 ect were yanmar built tractor. They still use Yanmar engines in many compact subcompact models. Part of the JD Yanmar exclusive was marketing in NA, Yanmar was unable to or very limited to there branding in the NA market as long as they wanted to keep supplying JD. This is a huge reason Yanmar is seen as a small/new brand in NA. They are and oem suppler.

Totally agree with you on the auctions not being a place to get a good deal.

Just to add some more JD, Yanmar info. It was 1987. I was an Ag teacher at the local high school. That year we bought a JD 1050. It was completely made by Yanmar. Right down to the Goodyear tires which were made in Japan. It was a great tractor and is still running at the school. That says a lot about a piece of equipment that has been used by teenagers it's entire life.

@larrydunlop378

2 жыл бұрын

Bang on there Bud!

@TheMCD1989

2 жыл бұрын

Wow a JD 1050, that brings back some memories from I guess not that long ago. My childhood was spent most weeks working on a pretty good size meat sheep and goat farm, if we weren't stacking square bales or fixing fence we were cleaning bed pack pens. The ONLY tractor they had was a JD 1050, 4wd loader. We worked the absolutely living snot out of that thing, it lifted piles of shit it was never meant to move, I think these new half plastic tractors would have broken in half. As far as I know, 20 some odd years on, that poor old 1050 is still going! I can't even imagine how many actual tons of manure that thing moved. That said what terrible ergonomics that thing had, and the tie rods in the front of the axle were always getting bent pushing the manure pile up.

Beautiful job! Thanks 😎🇺🇸

Good morning to you today, Great video very informative I enjoyed it Be well

Thanks for your advice. Sue from Australia looking to purchase a tractor.

bought a New Holland workmaster 25s two years ago, love it , dad wasn't to keen on it , if he would cut his finger he would probably bleed green and yellow , NH was quite a bit less expensive than the Deere but still uses the yanmar diesel, to date one of my better investments !!

Thank you for the info.

Parts for 8n 9n 2n are fairly easy to get your hands on still

I bought a Massey Ferguson gc 1723 a year ago, Excellent small tractor and my dealer is second to none. Tried to go green but couldn't get a call back from their dealer, Thy seem to be to busy selling tractors to our government !

In Canada (not sure about USA) the Kubota B3350 now has an very extended warranty on the emissions system.

@AximusPrime33

Жыл бұрын

As it should. They REALLY dropped the ball on that one.

+1 on avoiding rental equipment. I worked commercial construction for years and I can tell you that stuff gets rode hard and put away wet.

I get the whole quick attach thing for loaders, but for some of us who bought when that craze was in its infancy we are really being segregated. As an example, I’m going to buy a pusher box next year for my BX. My choice is Landpride for my pin on arms. No one else makes anything. I would like something a bit heavier to offset the blower weight that effects steering. Sure I can spend an additional $650 for the adapter and get quick hitch, but that takes all my other attachments out of the mix without more switching the adapter off and on. Just frustrating for a tractor less than 10 years old and buying a new tractor is not in the cards.

@GoodWorksTractors

2 жыл бұрын

The JDQA system has been quite popular and standardized almost all of their compact lineup since the late 90's. There were a few exceptions, but almost all included the JDQA. From my experience in having early 2000's Kubota's, they were much slower to catch on with upselling the convenience of the SSQA system. It's a shame that it took so long to make it commonplace. So, I can understand your frustration and that's why I point this out in so many videos. To help others avoid this same mistake. However, from a manufacturer's perspective, there isn't enough demand for every individual pinned setup or minimally produced q/a systems to warrant mass production. This would require a large engineering effort plus millions in additional inventory for most major mfg's. Simply not practical and I can't say I blame them for it. If the demand were there, then someone else would be producing products to match. Demand drives the market. It's an unfortunate situation without a painless answer.

@bhard_man

2 жыл бұрын

Ask you kubota dealer about the "old" BX quick BX quick attach

Thanks for the video. As a “newbie” to the tractor world, any suggestions on a snowblower/tractor combo that will handle about an acre to 1 1/2 acres of asphalt?

Older tractors ... They are more simple to repair and maintain than modern tractors. And it's surprising how many parts are available for the big runners of their day (Ford N series, Ferguson TO and MF series, etc) -- often newer discontinued tractors from the 80s/90s are harder to find parts for.

Thanks for the info! We're looking to purchase the LX2610 with cab and front snowblower this year!

@mikezahnow1605

2 жыл бұрын

I have an older version b2650. You will love it

Thank you …. I’m looking for a used tractor and trying to learn a bit.

I bought the John Deere 3005 which is the replacement for the 790 and parts are interchangeable. Woods and Westendorf make loaders for the 790 and 3005. I bought the Woods myself. Wish I would have bought the Westendorf because it has the dual curl cylinders and the Woods is a single cylinder curl setup.

As the oldest daughter, I inherited my Dad's 1990 John Deere 790, I think, in 2001. It looked brand new, with a little over 300 hrs on it. I thought he was going to cry when he broke a tail light several years after he got it. He swore he could tell the difference in the new one. He would borrow his brothers tractor for work that might damage his own tractor. He was raised on a farm in the 1940's, way back when the kids worked the crops by hand or with a horse or mule, before going to school. He was 50 before he got that tractor for his good sized garden. It was his proudest possession, and he babied it. If he knew how hard that we have used it, he would rise from his grave and tell me to park it. And don't get back on it, if i couldn't take better care, or be more careful with it, than that. I had been told that about 4 wheelers and his truck, if he thought that I was 'rawhiding' it. In 2000, when I was 40, I was still being questioned about a dent that I had put in his truck in 1975 when I was 15! He insisted that I wasn't telling him everything. And I wasn't, and never did tell him. My sister, a friend, and I had been somewhere we weren't supposed to be. And it wasn't even that bad, just looked bad. Backing out, I hit a pine tree and put a saucer sized dent in front of the right door. It left pine bark residue. That's why he kept questioning me. I'm guessing that he suspected that we weren't in town like we were supposed to be. Sorry, I got off topic. I could actually write more. Good memories I guess.

@judiszeszycki1510

2 жыл бұрын

J

@kcamerak

2 жыл бұрын

I enjoyed reading about your dad and your life. I'm sure you miss him. God bless you.

Great info!

@GoodWorksTractors

2 жыл бұрын

Good Morning!

Great heads up video👍 stay warm.🌴🔥🏝

@GoodWorksTractors

2 жыл бұрын

I'm trying, haha!

Spot on subscribed 👍

Great advice as usual! Looked at a 2320 before I bought my 2032R! Glad I didn’t buy it!!

Speaking of the John Deere 2305, the 2210 is SUPER SIMILAR! If you're not up for tearing apart the operator station and replacing the U-joints (or worse, the whole main drive shaft)... DO NOT BUY IT! Had to do that on mine, wasn't hard but took some time with getting parts. There are a few videos floating around on the procedure if you're interested (DEBOSS Garage has a particularly good one)

@chesterinflorida1567

6 ай бұрын

It’s not that hard, but takes a little while, 4-6 hours for someone not familiar with the repair. You need $20 worth of tools, and 2 $30 unjoints with grease fittings on the outside and problem is solved. Many KZread videos and instructions on green tractor website to walk anyone with a little bit of common sense to complete the task. Deere did modify the manual down the road, but they did mess up initially. This issue is really so overblown. The 2210, 2305 and 2320 are some of the best small tractors out there. They are a Yanmar built in Japan tractors and should last a lifetime. Just replace the u-joints if you are unsure if they were maintained and you have a dandy if a machine. Better quality than most in their class, even new machines.

@trumbley22

Ай бұрын

​@@chesterinflorida1567 I agree. I have wanted a 1025R or even 1023E for several years, but I came to realize that I'll never justify one at current prices. I started looking at the 2305 and learned about all potential problems. I found a tractor with 468 hours that has only been used for loader duty, and has never had the rear 3-pt or either PTO used. An old guy decided he needed a new tractor one day. I laid under it, there's zero movement in the U-joints and there is evidence they've been greased, looks like it was done regularly. The tractor looks like new throughout. I've talked to guys that have them and they love them. I'm not going to be scared away because one dealer had one that he didn't investigate thoroughly. I'm looking forward to years of happy service from my 2305.

I may have missed them but only counted 2 specific models. An AC12 was the only new tractor bought for our ranch (laughing) in 1960. A tenant and I cleaned it up and drove it to Moms place in town so they would have a tractor to scrape and/or disk weeds in her small orchards front and back. Currently there is 1 Fordson with steel wheels because some dirtbag stole the other one. A 40s Cat RD22 and D6 both orchard style. Did you know you can get a 'flat' driving a tracklayer? The Belarus tractor we sold at scrap prices. JD 300b large loader and either gannon or brush hog scraper on back. And the newest manufactured year of 1978 we bought in 2005 from a retiring backhoe single proprietor that spent its whole life with him doing foundation, drainage and other things in Carmel Valley. Case 580CK extendahoe that is teaching me why you need to operate, not just start, the equipment every 2 to 3 months. The JD was a foreclosure 'nickel' auction up near Davis if memory serves. I don't recall the brand name of Belarus made 4x4 and the only oil in front hubs was machine shop cutting oil. No dam* lube, grease... A tenant who was raising cattle was bringing it back from something driving backwards. I asked him what in the world and he said it stopped and wouldn't go forward. No noise, clunk, sound of shearing metal nor any other noise that always goes with the hub, U joints and front drive shaft(s) snapping.

I'm a girl and have been looking in the used market and when it doesn't have a loader I basically am like "next" and when it does I am still looking to make sure that things are not rusted and all things are in good and functional order. It was far cheaper and easier to weld issues on an old front end loader or fix the hydraulics than to find a "new to me"/used loader for an older model tractor. I came across more engines and other misc parts left in barns for my old tractor than front end loaders. Old Farmall girl here.

2019 Mahindra emax 22 L TLB........ I researched for over a year for what I wanted. 4 piston loader , Arm rest, Skid steer quick disconnect, Hydrostatic with cruise control, iron axles and transmission case And a kukji engine which is the Cummins 3 cylinder.... I paid 26,000 for the TLB new And could not be happier it's worth more right now than I paid.

@andrewgreiner4157

2 жыл бұрын

I have a 2019 mahindra emax 25L. I love it💪

@MrBlaze256

2 жыл бұрын

I bought a rural king rk24 front loader and backhoe and grapple under 20k. It's the same as the emax 25. Emax are tym brand

@AmericanRusticWoodworks

2 жыл бұрын

@@MrBlaze256 And for that price they are good tractors ... they're just not in the top 5 brands that's all. So you don't get a 7 year iron clad warranty Or part availability for being the number one brand of tractors in the world. And the only other thing that's different is resale value. Mine's worth more than I paid new Almost 4 years later! However I would buy Yours before a John Deere any day!

@AmericanRusticWoodworks

2 жыл бұрын

And all of them but the E Max 22L are tym. my engine is a 3 cylinder Cummins built by Kukji...!

@MrBlaze256

2 жыл бұрын

@@AmericanRusticWoodworks emax 22l is tym its the same as emax 25. Yours is the same as mine. Controls dash fenders

Twenty-five years ago I bought a Mitsubishi MT210D from the early 1908s. It is tall and skinny, loud, lacks power steering and is indestructible. Twenty-five days ago I bought a 20-year-old Kubota B7500. The moral of the story: if it still runs well after two decades it will last many more years. And new is, well, boring.

Great stuff, it was an education , do you have an opinion on the Kioti 2610 series . Keep the vids coming!!

own a mahindra for 16 yrs. this has been an outstanding tractor. 4x4 frnt loader no problems ever. 2215

John Deere 2210 has the same drive shaft. Had 600 hours on it before I ever knew about those u-joints. Luckily changed them before anything bad happened. Wait till your power steering assembly leaks. There's another great time. It's a discontinued part

I've owned a JD 2305 since 2007. The driveshaft u-joints are a challenge to get to. However, if you keep an eye on them and do the maintenance it's really not a problem. I replaced the entire driveshaft assembly last year as a precaution. As with any machine: do the maintenance and you'll eliminate 99% of your problems!

@Harry-zz2oh

2 жыл бұрын

The challenge is to know you need to do maintenance on a part. If it isn't in the manual how would you know?

@joshstenz

2 жыл бұрын

@@Harry-zz2oh You are correct: Deere screwed up on this one. But be inquisitive. Understand and explore how your machine works. Follow forums and KZread channels like this one. And, sometimes, experience is the hardest teacher!

@jesseamaya4413

Жыл бұрын

1025r owner here. I spend way too much time underneath mine just looking. By doing so I know what things should look like and hopefully will catch something before it becomes an issue.

@trumbley22

Ай бұрын

​@@Harry-zz2oh You know by looking for grease nipples. Just like looking for loose bolts, damage, etc. my mechanic dad never taught me to look in the manual for grease nipples, he taught me to look at the moving parts. The u-joints are a common one that get missed on many vehicles. If you can't catch something if it's not in the manual, someone else should be servicing your stuff.

Your wife must have quarantined you to the garage for some reason! Lol! Great video!

I'm going to use your JD parts store to compare my local dealer. They have a service special every March on parts. Have a 2018 1025R, 2020 4066R, 2019 835R gator and just bought or should say just came in, ordered in July 2021 and came in last week 2022 35G mini excavator with cab and angling blade.

My local John Deere dealer only sell their sub compact tractors WITHOUT a loader, and the loader is a $AU6000 option. Not sure about the US, but we get a lot of Chinese Dump and Run tractor brands. Cheap tractors, supplied with 5 attachments, mad you end up with no after sales services. In Melbourne, there's UHI, and in Adelaide, there's Trident, and this one Adelaide dealership is the only dealership that sells Tridents.

I have a small calf ranch in Idaho the Kioti 35 hp hydrostat is a awsome tractor half the cost of the green paint

thanks for sharing the video, so had you greased the universals underneath your John Deere tractor do you think the drive shaft would have failed?

@GoodWorksTractors

2 жыл бұрын

I owned the tractor for less than one hour of time. I think that if the previous owner had greased them, it would not have failed. However, there was no mention of greasing the joints in the manual and there weren't even zerks on the u joints for the first few years.