Editor sure has had lots of fun with this one 😆

@Eli-zb2yj

Жыл бұрын

@srijitia 🥺 did you try to push the buttons harder?

@mashgnash1236

Жыл бұрын

@srijitia 🥺 Did you unplug and plug it back in? Multiple times?

@sigurdchrist

Жыл бұрын

@@mashgnash1236 it's a bot.

@maestrodillingerklopfgeist

Жыл бұрын

Agreed!!! Meme Game is on point!!! right off the bat with a free real estate........ Approved...

@BigMatt08

Жыл бұрын

Love that editing style

I vote for the tube, it'll fit nice with that bonkers jet engine fan they reviewed once. The one that blew all the stuff that was behind it on the desk.

@christopherbarrows5040

Жыл бұрын

I've done a build in the tube. I've lost count of how many times I've run my fans at max speeds just to get that jet engine effect

@austinbowles6895

Жыл бұрын

Unfortunately the acrylic front panel severly restricts air flow. Absolutely chokes the computer to death. And the side slats are basically useless.

@dolan-duk

Жыл бұрын

@srijitia 🥺 Good.

@CreativityNull

Жыл бұрын

The tank is currently winning on the votes, but looking at how the polls are split up on Twitter, we might see both the tube and the tank.

@TheHammerGuy94

Жыл бұрын

@@christopherbarrows5040 is this the equivalent of revving a car engine? Revving up your PC fans roaring to cool your CPU for a blender run?

I've built a lot of strange cases over the years. The biggest surprise was the "Train case", it was sheer genius by Lion-Li. The design looked like a perfect model, but the compartments were arranged for an easy install, and great cooling. Best case ever, I hope they bring it back.

@CarburetorThompson

Жыл бұрын

Lion-Li more like Lionel

The tube has my vote for a build. I’ve considered buying this case as I have serious height limitations and I like the idea of the components being mounted vertically

@stephanhart9941

Жыл бұрын

Not as bad as Linus' height limitations! #shortlinus

@neuro3423

Жыл бұрын

I just wish they hadn't cut off 3/4 of the fans airflow. It would actually be a cool design for cooling.

@justaweirdtree9645

Жыл бұрын

I built one in it myself. Makes for a good upper-mid level pc. A bit limited when it comes to gpu width ratherthan length. An rx 6700xt from gigabyte just barely fit in.

@JF9

Жыл бұрын

Toob

@SirChadofWick

Жыл бұрын

I have this case for a emulation gaming pc so that extra room for two 3.5 hdd was perfect. I can confirm that the front fan being mostly blocked really hinders intake airflow badly and I’m thinking about drilling holes into the front plexi panel

I want to see both the tank and spaceship. Maybe a "diorama" of an epic battle between the two cases.

@squeeh

Жыл бұрын

Easy colab with Nerdforge in the making with the Diorama suggestion!

@NicolasChapadosGirard

Жыл бұрын

The spaceship I am sure GN did it. I wonder if I've seen the tank there too.

@brianv3ntura

Жыл бұрын

tank and spaceship already done by GN so it'll be uninteresting to see it uploaded here

@Lifesizemortal

Жыл бұрын

the EDI case is begging to be turned into TwinBee or OpaOpa by a Sega fan

@fam5451

Жыл бұрын

@@brianv3ntura I don't stink Steve actually built in the Tank. They just looked at it and bolted some fans on if Im remembering it correctly.

Awesome guys thank you so much for including me in this! Adding the power button to the backplate is a great suggestion and one that I will start implementing.

@bryantjopplin

Жыл бұрын

@yuel beast do you think there could be a way to design that same case so that the GPU is vertical with the connectors on the bottom?

@ybd.

Жыл бұрын

@@bryantjopplin So kinda yes? There are alot of Atlas builds (another chassis of mine) that use the orientation that you are reffering too. There is also a very nice monument build by a a modder/youtuber modsbyben who built the monument in an alternative layout that might be worth taking a look at.

The Tank one looks like it would be fun to see a build in. I'd imagine you could even snag a War Thunder or World of Tanks sponsorship from it too. The spaceship one would have been cool to see a build on when Lightyear came out and based it around that

@tz8785

Жыл бұрын

The Tank also doesn't seem too much of a waste of space. It's more or less a tower laid flat on its side with a turret on top.

@ThaJay

Жыл бұрын

@@tz8785 That sounds exactly like a huge waste of space to me xD

@empirelight4204

Жыл бұрын

i personally have the tank case and it was so hard getting my components in there, looks badass though

@phyde1885

Жыл бұрын

I thought for sure he was gonna say some good "Paint Job" would've turned that ship into a GREAT ShuttleCraft !! It's just about the right shape.and a little modding and your good to go! DAMIT JIM,NO PAINT !!

@grn1

Жыл бұрын

@@tz8785 Early desktop computers generally had what we'd now call a sideways tower setup. I think it may have been around the time ATX became a standard that towers started to take over since they could be hidden under a desk easier. Some desktops were designed to have a CRT monitor sit on stop of them while some earlier more affordable home computers (Spectrum, Commodore) had the computer and keyboard as one unit (you'd generally plug those into a CRT TV). I should probably note that most of that was before my time (I do occasionally watch channels like ComputerPhile and 8-bit guy).

I actually really like the tube case. It’s different without being goofy and one could assume it’s thermals are pretty good. The acrylic is a bummer, I know curved glass is expensive but if it had glass instead of acrylic I’d be tempted to buy that damn thing lol. Edit: also I can’t believe no cougar cases made the list, they have so many bizarre case designs

@VidweII

Жыл бұрын

a cougar got a mention.

@unlisted9494

Жыл бұрын

If it had glass, that would easily double or triple the costs due to custom manufacturing and the associated extra packing materials to secure it, as well as an even bigger shipping penalty. I don't see a reality where this thing having a glass window could even be a viable product on the market tbh

@grn1

Жыл бұрын

Some other comments said the case actually has hindered airflow due to a chunk of the intake being blocked I think. There were some suggestions to add holes to it to fix said limitations.

The K2 has unfortunately been discontinued, it's unfortunate because it's a really decent case and can hold a fair amount of hardware.

@chrisc6932

Жыл бұрын

Clones of the K2 can be found, searching for 'barrel case' style computer cases. The difference between them all is mostly the logo slapped on front.

@GlorifiedGremlin

Жыл бұрын

@Sarika Gaming Woooow you're even trying to take advantage of people's kindness to scam?

@HansenLaMoose

Жыл бұрын

@@GlorifiedGremlin it’s a bot you goblin

@GlorifiedGremlin

Жыл бұрын

@@HansenLaMoose I'm well aware, but they're are still people behind the accounts

@HansenLaMoose

Жыл бұрын

@@GlorifiedGremlin lmao. no they’re not. they’re an account that just posts on videos programmed via a script. other than the person who sets up the script, there’s no one there. unless that’s what you’re meaning, then that’s just sad.

Doing a 3 rad monster in the tank PC would be amazing. Imagine the cooling power!

@rfrbz1269

Жыл бұрын

I want to see how small of a fan Alex can find to put inside the barrel

@lucasrem

Жыл бұрын

send them to the Ukraine please

@fynkozari9271

Жыл бұрын

Nah, I prefer to use Ryzen 9 7900. 65watt, 50°c no heat. Unlike Intel core i9 4x the energy consumption space heater. Just to get the exact same fps.

@lievre460

Жыл бұрын

3 rads? what are they cooling with the 3rd rad? or do you mean a custom loop with 3 radiators

Honestly love the new video format! this seemed like a passion project from the editor more than a LTT vid! xD

That temp and humidity gauge on case one was like $1, since I bought 20 of them from Amazon for $20, they actually seem to be calibrated properly, which was impressive.

2:57 where is link to Linus F Tips LonelyNans? Asking for science

I watch your videos everyday Linus keep up the awesome work! Could you also possibly do you weird combinations of pc parts videos?

@lucasrem

Жыл бұрын

Server board + 3x SLi 480 ?? he does that

Love to see more corridor and LTT together ( No matter how small it is ). Two of my favorite channels.

Honestly I really like the concept of the tube one, I feel like more PCs would be cool with that form factor of skinny and deep rather than tall

My favorite weird cases were always Thermaltake's "Level 10" series. Highly impractical but were a definite eye-catcher before tempered glass and open-bench styles caught on.

@happysnackers6397

Жыл бұрын

Was hoping they'd show that one in this video. I actually have a Thermaltake Level 10 GT that I found on the side of the road in 2018. Cleaned it up and put my build inside it. It looks so beefy and the hot swappable drive bays are actually pretty practical, pretty roomy and easy to work in too. I have a rtx 3070 and 13700kf system in it now and I don't see myself ever switching to a different case because nothing turns heads like the level10 gt.

@TheSlayerN

Жыл бұрын

@@happysnackers6397 I almost convinced myself to buy an open box one at Microcenter, but missed my chance. When Thermaltake made a "Level 20" a couple years ago, and I was sad they chose to break the original aesthetic.

@afx85

Жыл бұрын

The In-Win "Frame" series was probably the "PC as a sculpture" peak, but the original level 10 was close. I also own a Cosmos that looked like a spaceship created by a usability purist. Then I remember one of my coworkers mistaking my NZXT 630 for a climate compressor.

GN already did the Tank, the K2, and IIRC the EDI, and the K1 reminds me of one Jay did a while back with green coolant (think he called it the symbiote build). I would like to see the Quadstellar

@joshuasisson6816

Жыл бұрын

In the appreciation of South Park... GN did it! GN did it!

6:45 as someone who enjoys creating music, I really appreciated the slicker background music during the duration of this case. Some of the music you guys have been using has felt really hollow and "stock audio asset"-y. I know you guys might not notice what you did, but I really want this kind of style in future videos! It really raises the production value! BGM is one of the few things I think you have left on the table in your quest to make superb high-quality content; I know you can do it! ps(s): bonus points if you use a really good background BGM list in a reoccurring way through all future videos if you consider this change, this will create a "soundtrack" feeling to your videos. it's the little things that count, and i wasn't able to put my finger on what quite felt missing to me until i saw this example of what it was like with it there. double bonus points if you hire or reach out to someone who creates music for your BGM, custom tracks are always superior......

Loved the editing in this one, good job Alex!

I usually just reuse the same beige tower I've had since the 90's. It always felt huge, since it has six 5-inch drive bays. Lately however, modern GPUs and CPU coolers have kinda made it somewhat tight in other dimension.

@volvo09

Жыл бұрын

I got rid of my 90's case at some point, but I'm still using the case I bought in 03. Next build I may get a new one.

@Shaflugi

Жыл бұрын

There are dozens of us!

@nielskoolstra

Жыл бұрын

Im still rocking the Antec GamersGear NineHundred. That 200mm top fan is spinning after all those years.

@probablyyourneighbororsome8412

Жыл бұрын

I'm still rocking a triple window superflower 201s from 2002 What's neat about it is you can just remove the hardrive tray and basically fit any size card you want

@jemiebridges3197

Жыл бұрын

never just thought about painting or vinyl wrapping the 90's case?

Wow. I had to look it up. I got the Thermaltake View 27 for $61.99 (Newegg) and it had a rebate in January 2018 that priced it lower. Reasonably good case to build in and the thermals were okay despite only having about an inch of venting on the front panel. (Edit: I know the view 37 is a revised model but still interesting to see the prices change when the last stock is bought by resellers.)

@knovives

Жыл бұрын

I own a view 37 the only downside is that when using the vertical mount for the GPU the acrylic panel ends up being too close to the GPU choking the fans

@tobiwonkanogy2975

Жыл бұрын

EITHER CRAZY HIGH OR CRAZY LOW DEPENDING ON THE ITEM. oops caps

@shinigamidyo2622

Жыл бұрын

i had the same case and have some good news for you, the tinted window on the front can be removed, and thats what i ended up doing and getting major improvement on airflow.

@Rastor0

Жыл бұрын

Hey what's up Thermaltake View owners' thread. I did my View 37 build at the end of 2020. I'm using the vertical GPU orientation; I got the Thermaltake riser cable and it works well. My GPU is one of the ASUS with the liquid cooling so the only fan on the GPU itself is a squirrel cage pusher, it works well.

@knovives

Жыл бұрын

@@shinigamidyo2622 I've had the idea of cutting some speedholes in the front acrylic panel with a laser cutter

This video came at a perfect time since I just upgraded my whole setup case included. I thought the extra fan space was extravagant in my new case but these cases are on their own level.

I honestly love Linus's segways. They always make me laugh and he never draws out the ad.

The tube case is just screaming for a monster energy can make over.

These are the best videos ever. I love these funky case videos!

Most fun editing in quite a while it feel like! Loved it

This video style is amazing I love the "having fun with it" vibe. XD and, great work by the editor!!!

Loved all the crazy cases. We need more and weirder. Maybe custom ones even?

@RiddimWook10

Жыл бұрын

Nah these cases are lame.

@fynkozari9271

Жыл бұрын

Yeah, but just remove those useless ssd brackets. Nobody likes to use slow sata ssd anyway.

@Plaston_

Жыл бұрын

I kinda miss thoses experimental cases from early 2000's that used to have many many expensions and stuff!

"WHAT ARE THEY THINKING?!?!" PC Case Designer: I took something and build the weirdest shit to be exist

Awesome! I like the tank and tube. Keep'em comin!

Really love the look of the motif monument.

Man, the tube and the spaceship are pretty rad. Maybe I'll design and 3d print a nice case for my "server" build rather than the route I was going with a sheet of plexiglass some standoffs and mounting it to the wall.

@nullx8

Жыл бұрын

i have the Tube/barrel :P its pretty nice, (i bolted it to the wall) fitting a large RTC is a bit of an issue, but besides that its just perfect, plus its cheap, you can get those for like 50 bucks on aliexpress ;)

I haven't laughed this hard with a LTT video in a long time. Great video. Props to the editor

9:20 "THERE AREN'T COUGARS IN PC CASES" LMK if u got the reference lol

@ShadowSentry211

Жыл бұрын

Matthew Judge moment

love the editing style with this one!

I like the Motif Monument best, but that tank would have cool to have in the barracks when I was in the Navy. Definitely would have breezed through room inspections with that.

The spaceship looks really cool, but I stuck with a more traditional case for my build, a Corsair 500 D Airflow, it's really a lot bigger case than I needed, but as it was my first build, I wanted to make sure a 360 AOI would fit across the top.

I suggest using the tank case! You could make a video from the unusual cases you have already built for KZread channels. The pyramid, creeper, neon city, and purple stone cases were entertaining! I particularly enjoyed that VERY oversized case that Linus climbed into! I hope you all are doing well.

@mikelarin8037

Жыл бұрын

I'd get one of the vapor elements and install it in the gun tube so it constantly smoked while I gamed

Other than the price, that tank case is pretty badass. The EDI is also pretty cool. My vote is for one of those. Primarily the tank or if you're going to do some cool modding the EDI.

I kinda wanted the View 37 a few months ago because it was actually listed at around $130 US for a little bit.

@fynkozari9271

Жыл бұрын

But why do they design glass on top? That's where the air supposed to flow.

@ShiroR3aper

Жыл бұрын

@@fynkozari9271 If I'm not mistaken there's no room to mount fans there, it's more of a showcase anyway so airflow isn't no. 1 on that case.

@matthewjbauer1990

Жыл бұрын

@@fynkozari9271 Yes, in most PC cases, they are designed to pull air in from the back and front and exhaust the hot air out the top (oversimplification of this). In this PC case, from what I gathered when I wanted the View 27 gullwing version, the case is designed for true negative air pressure where fresh air is blown in from the front and pulled out the back via the case fan, GPU, and PSU. In this negative pressure design, I suspect air within the case doesn't have time to fully heat up and rise to the top because fresh air is constantly flowing in then out the case.

I recognize the sensor in the front of that tank case - it's a hygrometer / thermometer combo (measuring humidity) and years ago we bought a few off eBay for a buck each to put around the house 😂

@WillDieForPieGaming

Жыл бұрын

I also have the exact same ones sitting around my room. Funny.

Some amazing editor work. A++ effects

You all should check out the Thermaltake MK1. Old case, been discontinued for years. But I still have my old i9 9900k system built into it as a server. The case is massive with spots for 4 200mm fans and was recent enough to have mounting options for water cooling. It is one of the few cases I've ever seen with a side panel fan, and a 200mm one at that! As bought the air flow isn't impressive, but with all the fan slots filled with slow moving fans, the air flow is amazing

I would love to see a build in the tank case. Looks fun to build in

@maxmil2809

Жыл бұрын

Yeah and also I’m pretty sure the amount of people who are going to click on the video is going to be way more than the other cases’.

@mikeymaiku

Жыл бұрын

@@maxmil2809 out of the hope for content, the segotop spaceship was already done by Gamers Nexus so.... i would like to see something different tbh

@maxmil2809

Жыл бұрын

@@mikeymaiku Yeah exactly like the cylinder case I already saw a build of it and like you said its good to see something different.

@Justin3Santiago

Жыл бұрын

GamersNexus did a build in both the tank and spaceship ones.

@React2Quick

Жыл бұрын

@@Justin3Santiago I didn't know they did one in the tank. I know they did one in the spaceship one.

who ever edited this video deserves a raise

I REALLY enjoyed the editing on this one!!!!

Love my I-fixit kit, this weekend used there Samsung Galaxy Watch Active 2 teardown guide to strip my watch down to reglue the screen that had become detached, now as good as new and hopefully see me through another couple of years for the cost of a tube of specialist phone screen glue.

I for one am very fond of the non-standard-box cases and wish this video would have been released before I built my new pc in an open-concept case that's similar to the K1

@gios4ma

Жыл бұрын

The quadstellar is incredible and I am fighting my buyers remorse to the bitter end

I've had the View 37 for a few years now. It looks great, but the problem with it being acrylic means it's super prone to scratches. The static that builds up on the acrycilic just keeps the dust sticking no matter what. Looks cool still though!

@baba_kaos

Жыл бұрын

I got a View 27 still in use. It is the little bit smaller Version of the View 37. I still love my Case. It looks like a modern Mac Pro should look. The Shape with the big Window is so nice. And it is perfect to maintain and upgrade - because of the Sidepanel which opens the Top and Side at the same Time. I love this Case. Its nice and has so many SSD-Mounting-Points. Thermaltake should produce it again. One of the best Cases ever.

@roanoconnor98

Жыл бұрын

@@baba_kaos I would certainly consider it on my next build but would prefer it to be glass just to minimise the scratches.

I own an Essenses X-treme Fear case and I am truly proud of it, it fits perfectly for this video but I love its design completely

A couple years ago, Thermaltake showed off this concept called the Distrocase 350P. The whole idea is it's an open air case but the entire back plate is one giant acrylic reservoir and pump combo for custom watercooling loops. Idk if it was ever actually released but it's still shown on their website.

@grn1

Жыл бұрын

From what I've heard I'm not sure I'd trust Thermaltake's products. Maybe they've gotten better over the years but I had a friend back in college that used Thermaltake and had a good number of leaks and seemed to refill his reservoir every couple of months (maybe that was just the state of liquid cooling back then, I've always stuck with air cooling).

Alexandre is really killing it as an editor. Every time I think to myself "wow the editing on this is great" and look for the name at the end, it's them.

@Not_mynumbness

Жыл бұрын

So is no one going to talk about that pink thing waved in our face asking for a bookmark?!

@vickersvaliant1

Жыл бұрын

@Priya Gaming bot

@griffin8062

Жыл бұрын

I'm not sure I like it, it's almost overstimulating

@yausernametaken

Жыл бұрын

Disagreed. Overedited as fuck w/ the editor trying to force their humor every second of the video

I've been using a 3D printed, open-air "Test Bench" for a few months now (close to the Yule Beast, but without a vertical Mobo setup). It's awesome. If you don't have kids or cats, I highly recommend an open-air setup lol. Great temps.

@ThyCurly

Жыл бұрын

i have a wall mounted Thermaltake Core P3 without the glass and i agree , no kids or pets , open is a beauty, dust isnt as bad as people paint it to be

@tiestofalljays

Жыл бұрын

@@ThyCurly Yep! Dust hasn’t been an issue for me either. Always have wanted to try wall-mounting. Bet yours looks pretty sick. Haha

Your original weird cases video is what got me watching your channel

I actually got the cougar conquerer 2, and while it may be a pain to keep clean and cable management is a nightmare, it's a real showpiece and definitely brings my "compensator machine" together

Of the cases shown, I'd probably choose the spaceship as my vote for the livestream build, followed by the tank. If I was choosing one I'd buy over the others, I'd go with the ThermalTake with the curved side panel, but it doesn't look that different from a normal case to make a livestream that interesting. Too bad the panel's not glass though. The Quadstellar is available in PC Building Simulator (1, at least, haven't played 2 yet) and I hate it.

@brianv3ntura

Жыл бұрын

gn has their own livestream oft he spaceship and i think the tank as well.

I actually own that last one (view 37) and I can I will say that its a fantastic looking case in real life. Sadly the vertical GPU mount is problematic, with my 2080TI the card was too close to the glass and had cooling problems and with the 4090 I moved to there was NO WAY it was getting mounted vertically. The good news was that moving the card to direct motherboard mounting solved the cooling problems and TBH I think it ended up looking better that way anyway.

6:36 i actually have the K2, its bolted to the wall above the screen, perfect to save some space. i love it, i has only one issue, the 2060 Galax is barely fitting as the power cables add about 1cm of additional height, but it works just fine with a bit of force. airflow is great as well. plus this case goes as low as $60

Really loved Linus's energy in this video.

Cat owners are gonna have a cat-astrophe, 9:45

Oh my God I SO hope this style of editing continues in future videos I love it so much. The Videos of you guys are enjoyable no doubt, but this is a flippin 1A showcase how much tasteful editing can add to an already solid Script. Well done from every side here.

@tboodman

Жыл бұрын

ZOOMER detected, needs a jump cut or sound effect every 1.5 seconds to stay focused on the video

@Plaston_

Жыл бұрын

@@tboodman When a zoomer insult an other zoomer of being a zoomer.

@K3Vz0

Жыл бұрын

​@@tboodmanok boomer

@Bossfightmedia

Жыл бұрын

Talking from experience much?

I would love to see Linus and team dedicate a space to design and play around whole room setup. they sure have all these gear to complete one and get their thoughts on what they would think a good setup would be.

I own the view 37 ARGB right now, solid case and you can pop the tinted piece off the front panel and install a mesh screen for better airflow

With how large these cases are, at least I don’t have to worry about a 4090 fitting.

@user-ss7rd8hv2y

Жыл бұрын

Убить люди; могуществ второй бог серафим женщин

@MihkelKukk

Жыл бұрын

these bots are really getting out of hand huh?

@Detec_

Жыл бұрын

@@MihkelKukk fr

@TheMyleyD

Жыл бұрын

@@MihkelKukk they having conversations

@lucasrem

Жыл бұрын

underclock it please !

Oh that spaceship one looks a lot like the Dolphin/Orca/Beluga from Elite Dangerous. they even come in white with black windows by default. Those are my favorite ships, if I was gonna make a standalone ED build that'd be the case for sure.

@the_7th_sun

Жыл бұрын

came here to say this

We need more edits like this one

Mentioning weird cases... The Corsair Obsidian 1000D has space for 17 120mm fans. I'd love to see you guys fit it out with industrial 120mm fans, sounds like a fun video idea

Linus’ OnlyFans segue is the strongest segue yet. Unlikely to be surpassed.

@SmoochyTea

Жыл бұрын

He is such a tease… He knows people want this…

I actually use the Deepcool Quadstellar case. I like how it looks, but I had to rig the glass so they would open and close using car door lock actuators. I painted mine white and use blue tinted tempered glass because Destiny 👍

Best intro ever, also the Quadstellar would be great for a dual build for a Podracer

Fun video but I was hoping u guys would build a PC inside of them as well to see how they perform. Maybe something to think of next time

I love this new editing style it makes me like 2 times more focused

@TheXshot

Жыл бұрын

Same here. Gotta love ADHD

@bullshark0353

Жыл бұрын

@@TheXshot ain’t even gonna lie I can’t watch some videos for more than 2 minutes without zoning out

I've been bummed that the View 37 got discontinued, with no prettier replacement waiting for it. The only similar cases still available are worse. I want my top panels to not have any vents. However, modern cases with plain top panels are surprisingly rare. I like Thermaltake's thinking here though. If you don't want to install fans/rads at the top anyway, why not 1. make the top detachable, and better yet, 2. integrate it into a see-through side panel, so you can take it off in one go AND get a great look at the internal components even from standing hight. So, my vote is actually on the View 37. I want to see more cases do this, especially if someone can manage to do it with tempered glass, while keeping the price reasonable.

@TheYoshieMaster

Жыл бұрын

In the CES coverage there was a cool looking case. It doesn't have the clear side and top panel, but it has no seam between the front and side panel. IMO it looks better.

I have an older version of the View 37, bought it back in 2018 or so. Mine came with smaller non-rgb fans, and the window is actual tempered glass. But its a pretty good case overall, I like it.

i really want to see you guys build a pc in every one of these cases and then compare them

3:53 "Tpye-cx1"

If you do the tank case, you should source some older hardware to theme it. Something like the the Asus Z97 Sabertooth Mark 1 or the MSI Z270 Camo Squad (probably this one), the MSI Camo Squad GTX 1060 and some G.Skill Sniper X Digital Camo. Not a high performing build by any means but themed quite well.

@user-wx6mi5xh7w

Жыл бұрын

Man, it's been a while since I've seen the Sabertooth branding. (i7-4790K and GTX 1060 is still a good pairing for esports titles though.)

@catch2030

Жыл бұрын

@@user-wx6mi5xh7w I had the board mentioned above back in the day. Loved it. Back when TUF wasn’t budget. Bought it for $225 in 2015 sold it in 2019 for $250.

I had a View 37, and it was terrible. I went for the vertical GPU mounting (because why wouldn't you) and there was so little clearance between the card and the side window that the acrylic got slightly softened by the heat, and the suction of the fan caused the softened part to bulge inwards which then rubbed against the fan. Bad times! (As for open air cases being pet hair magnets, I have two scruffy dogs and a cat, but my ThermalTake P3 stays cleaner than any of my other machines that are in assorted enclosed cases; I figure it's because the only airflow comes from GPU and radiator fans so there's less overall suction, plus there's no box for dust etc. to get trapped in.)

I would like to see a build in all of these cases~

You have to make a tech song... NOW!

11:00 cmon guys at least wipe the fingerprints off for the b roll

@harriska

Жыл бұрын

Ikr it's so greasy

I've only had "big black monolith" or "big black cube" type cases after the beige went out of style. I had been using a Zalman GS1000 SE since 2008 and only replaced that for a Corsair Carbide Air 740 in 2018. I wish Corsair would do an updated version of the carbide for USB-C support because that thing still is the best ever case I've worked in.

I have the original quadstellar right now. It came with 5 fans pre installed, one behind each flap, and one in the rear. It also only came with 4 glass panels. The two facing downward are new additions. Two usb 3 and separate mic and headphones jacks. I can also store 8 3.5" drives as well as 5 2.5", or 13 2.5" for "storage". I will say that the bluetooth app "works". "Your's, if you can ever get it, to work". I did and the case actually performs really well when not in an enclosed space, with the front panels opening automatically, or app controlled to cool the inside down. It gets noisy if the fans are at full speed when the panels are open. The led aspects can gtfo, as can the ones on my motherboard and Ram and water cooler. I'm fed up of it all going rainbow on my ass, all the time. My biggest flaw was having it all working, the way I wanted, then I pressed the reset button on the bluetooth board. I can't get it to connect to the app now. I need to set up a 2.4GHz network to get the app working but can't remember how I done it last time. I will say that the size of the case is way too big though. Omg the weight when everything is installed is ridiculous.

I actually _adore_ the Motif Monument, it's so slick and eloquent, shame it restricts to ITX and only looks good with tiny GPUs. I love the design tho

What do they think they are building, a Tesla. 💀💀 - Account suspended -

@RubenYT

Жыл бұрын

really has a new meaning now huh

It was super entertaining! More like this please! :D

@fahadmalik8862

9 ай бұрын

Nooo

Certainly some interesting cases, and the tank one gets my vote. At least that one seems somewhat stable/sturdy. I worry about the spaceship one.

The waffle house has found its new host

@kaileh57

Жыл бұрын

The waffle house has found its new host

@malachiaraya7410

Жыл бұрын

The waffle house has found it's new host.

@specter8660

Жыл бұрын

The Waffle House Has Found Its New Host

@leomunoz5891

Жыл бұрын

The Waffle house has found it's new host

@Chronoe

Жыл бұрын

@@leomunoz5891 The Waffle House Has Found Its New Host

I'd love to see you review the Cooler Master Sneaker X as well

Linus, I just love your segues. Like yeah

the waffle house has found its new houst

@wolfninja11111

Жыл бұрын

The waffle house has found its new host

@dontask1928

Жыл бұрын

The Waffle House has found its new host

@dimitris4176

Жыл бұрын

the waffle house has found its new houst

@duncetheman

Жыл бұрын

The waffle house has found its new host

@malachiaraya7410

Жыл бұрын

The waffle house has found it's new host.

Never getting tired of the Linus short jokes 😂

The case is what I miss about my custom built desktop (2007) was a clear case on all 4 sides. The external fans were blue led, and even had a pulsing blue light tube but it was controlled via on/off switch. Probably doesn't exist but a clear laptop body (whole thing) with blue rgbs would be sick

I almost bought the Thermaltake View 27. Its basically the View 37 except the plexi side panel opens gullwing style. If I went air cooling instead of 240mm AIO for my AMD 3600, I probably would have gotten one. I like flashy computer cases but since I moved my main gaming PC to the living room and use my laptop on the monitors in the office room, I am glad I went with a conventional tower case instead.

O hay, they finally took my suggestion of featuring these cases in a video! :D

love the corridor digital reference!!

That was such a fun video to watch

I recently bought a kinda ripoff of the Antec Torque for only 100 USD, but it was on special, now it's something like 125 USD. The Keiders C650 Mech Case, maybe it would suit a video because it's mini-ATX or it barely fits a full ATX board like my H610M-E D4 (don't know if you can put rear shield on), IDK because it's a pain in my rear end to cable manage or have hard drives in (I just put one at the bottom, and a small one behind the motherboard screwed into two screwholes, I put in one). I'm putting a mirror covering on one of the side panels, (the one with cables) like Linus suggested. Comes with a USB-C port! Also the power button at the front broke but I replaced it with a front IO I found for around $30 on Amazon Australia.

I like the space shuttle and Tube cases, the tube would be nicer if the whole front was mesh for optimal air flow. As for the shuttle, i'd probably remove the clips and make it so it can open easily with something like a small air piston.