Somebody’s son was definitely neutral-dropping that fuckin thing 😂

@gm1258001

Жыл бұрын

"What's it got stuntman!!!!???"

@masterdriveroftoyotazupr4164

Жыл бұрын

Spot fkn on👏. I've never-ever heard of 470s with this issue. 2 of my buddy hit trails with theirs too.

@dalecrider1816

Жыл бұрын

​@@masterdriveroftoyotazupr4164 your 2 buddies must wear pink skirts and fly the pride flag on there vehicles

@ethangable5386

Жыл бұрын

@@dalecrider1816 I think you’re mistaking them for ford owners🤨

@dalecrider1816

Жыл бұрын

@@ethangable5386 probably

Some bodys been racing that car! I bet!

Scotty Kilmer said Toyota and Lexus cars are trouble free.

@nickajk1

Жыл бұрын

Yes, he's full of crap half the time

@ganeshnarayan5505

Жыл бұрын

@@nickajk1 right

@nickajk1

Жыл бұрын

@@ganeshnarayan5505 trust me maintain any car with oil changes tires fluid changes I have vehicles in my driveway over 20 years old and they're all Chevy

@ganeshnarayan5505

Жыл бұрын

@@nickajk1 Yup this is very true so i always owned asin cars like Honda and toyota but recently i bought a 2017 Chevy Tahoe and believe me i love the Tahoe

@nickajk1

Жыл бұрын

@@ganeshnarayan5505 share your knowledge

The moral of the story don’t let your teenager’s drive your car .

@Thetreetroll

Жыл бұрын

🎯

That grinding sound sounds like a A-10 warthog LoL

@midlifeparty

Жыл бұрын

If you heard brrrttttt then it wasn't for you lol

@user-wo5ok4pw4j

Жыл бұрын

@@midlifeparty LoL

It's sounds expensive 😩😫

heard that exact same sound once and it was a front drive axle that somehow popped out of the splines ...luckily only the axle got damaged and a simple axle swap fixed it

This is exactly what is happening with my grandma's gx. She was rear ended and the dealer said that the transfer case and transmission are bad

@AdrianLopez-gp9yz

Жыл бұрын

I hope she’s okay… but that doesn’t happen by crashing it happens by constantly driving the gears without proper stop in each gear, no full break on while charging making it grind when switching. Just tell her to press all the way in to a full stop THEN change gear never change while the car still moves hope it helps!

@StarHunter28

Жыл бұрын

Yeah I've seen several with this issue, seems pretty common

That shaft will run. Clean up burrs with a file. It will go fine. Done it to three of them and all are still running great.

@seanbartels3995

Жыл бұрын

It keeps happening cause it’s like that💀

@mbox30____

Жыл бұрын

@@seanbartels3995 he’s saying he’s done it to three different cars and none of them have had a problem since. not that he’s done it 3 times to one car and says it works fine.

@LiteEmUp2531

Жыл бұрын

Or u could clean it up and weld the spline possibly or just throw it all away it japanese 😂😂

I would definitely reuse the shaft..give the customer the option.a little file work and a little valve grinding compound will save the customer thousands of dollars.

My cousin had this same problem. Same noise. Turns out he had bad gas 💩

@donutdan1508

Жыл бұрын

Yup. Eatin beans n ripping jeans.

@astro2456

Жыл бұрын

RIP to ones who got in for a lift.

@kaey2946

Жыл бұрын

😂😂😂

I would try running that with a new transfer case adapter for the time being

@shawnd567

Жыл бұрын

Yup! It didn't look that bad.

@carlthedieselguy5147

Жыл бұрын

Yeah I’d dress up the Splines a bit with a file. Then ship it.

@astro2456

Жыл бұрын

@@carlthedieselguy5147 eventually something comes back around, hope all dosen't come back in a go, the preload is already unbearable

@gmmza03

Жыл бұрын

3/4 of the splines look decent.

@williamvaughn2938

Жыл бұрын

​@@astro2456 Agreed, however.. The splines don't look chipped or damaged, just smushed at the front end

That’s what happened to my 2009 RX 350. Unfortunately, I was driving across country when the transmission gave up the ghost.

Someone was driving it like a psycho. That same setup is in the million mile tundra. A750 5-speed is still used in 5th gen 4runners and other Toyota trucks all across the world. It never breaks.

That's why this model comes with 2 gear shifters. I don't know how the mechanic missed that?

I bet anything someone was slammed into park while they were still rolling and putting it in Drive still rolling backwards from reversing and vice-verca

I went to a used car dealer and it did a grind switching low to high range, and the salesman was like "oh that's normal they all do that" but I had a manual fj cruiser which has the exact same transfer case and I knew that wasn't normal, so I did it a few more times to see if it was a fluke or if it would do it every time, and the salesman got pissed "hey stop that, your going to break it!" Me - "I thought it was normal?" "You don't know what your talking about, just stop doing that" he replies. Needless to say I never went back to that dealership.

Good mechanic!

Given it's a Lexus AND a 450 no less my friend at Lexus Corp says Lexus will cover the material cost at the very least & if presented to the Lexus area rep probably the labor also. Might want to think about that Lexus is the most user/owner friendly Corp anywhere and they stand by their products plus they make the MOST RELIABLE CAR in the world give them a call

Takes big brains for a car owner to feel grinding when the do something and then continue to do it. In this case the difference in pulling the t case and changing out an adaptor and pulling apart a transmission and changing that shaft.

That's what happens when you rev the RPMs and drop it in gear

Ouch that noise but at least no one didn't got hurt

Been there done that. Genius design from toyota

That exact same thing happened to my Tacoma.

@StarHunter28

Жыл бұрын

Seems like a common issue in Toyota products

That looks the same as one I did on a either Toyota pickup or a Highlander found that sleeve used on eBay for like two or three hundred bucks not available separately to the best of my knowledge got to get it used

Damn this is like the same sound coming from my 05 Nissan Sentra but it didn’t happen like this. My control arm snapped and the axle popped out as well. And when the tow truck guy loaded up everything went smooth. Then when he’s unloading idk what happen but Ig something with the trans whenever I put it from any gear into park it makes that same noise and now it’s just sitting parked up smh

I love Lexus..bullet proof

He can definitely save that spline by filing the damage a bit

@jamesworsham2312

Жыл бұрын

I would if it was mine with them files out baby make it smooth like a baby's bottom

Japan was always proud of their steel, parts sometimes were stamped "Quality Japanese Steel "...guess that's a thing of the past too.

@Matt-nq4du

Жыл бұрын

All the quality in the world can’t make up for abuse by dumbfucks.

@ethanmccoy1680

Жыл бұрын

I guess so :( I think my 02 Lexus ls430 is the last of the greats

That thing looked shattered, must of been hauling or racing hard

Can you replace the shaft ?

That thing was dropping ass 😂

Is this a common problem I’m planning on buying one this week and the lady said it makes noise from the transfer case so I thought I’d do some research

Ouch

My Evo 7 GTA does the same, but it sounds like grinding noises

Of course. It could nor be just the sleeve

That’s crazy I heard the noise and said the spines are gone I better play the lottery

@saltyballs1041

Жыл бұрын

Splines

You can file the spline and get it working again.

@dirtyaznstyle4156

Жыл бұрын

Too much clearance between the splines it’s just gonna start having a lotta play clicking when shifting into gear and eventually slipping or breaking the new part

@shawnbass2590

Жыл бұрын

@@dirtyaznstyle4156 true that. Better to replace I feel ya.

I just did a Lexus 460 had no need to take off anything other than the manifold, the dipstick and O2 sensor light butter people seem to be having a hard there’s no need to take the alternator off or the motor mount people make things difficult for themselves

I knew that sound had seemed familiar, my brother has a washing machine and the spinal gear torn up.

No she will be fine just get the little flat file out and do them splines, they look good apart from the start?

It will work again

I would get a smaller adapter so you would have to replace the shaft

Someone tried to shift on the fly. LoL

That shaft is fine no need to replace waste of money and time

My truck makes a very faint but similar sound going into gear.

An engineer said "this adapter sleeve is exactly the minimum thickness needed to transfer power, so we should make it 3mm thicker". Accountant "no, if that thickness works, we'll just build them like that, 3mm thicker would make each car cost $10 more".

Someone drove like maniac. The result is the bonanza.

Weld the shaft to the adapter

Thought it was an A-10 Warthog going all out.

Did a small jump on mine on gravel road and this happened to me

How did that happen

Haha Lexus go brrrrrr

Legit said has to be the shaft and I was right lol

Time to crack out the welder and fix them teeth on the shaft 😂

👍

My question is, does this happen on Toyota Highlander?.... recently looked at a car, but I sent him to a transmission shop, for almost the same noise.

@StarHunter28

Жыл бұрын

Toyota owns Lexus, so it's possible

Just cut the shaft end off and weld on a new end on

Going in reverse and dropped it in first.

@luisrivera7506

9 ай бұрын

Makes sense

Never buy 4wd unless you actually need it. Winter tires are more important than 4wd. You can drive 2wd in snow with winter tires perfectly fine. If you believe you need 4wd because of snow you’re wrong and spending your money on the wrong solution to your snow problem.

@michaelriecher5632

Жыл бұрын

Growing up in Michigan in the 60’s very few had 4 wheel drive. In the winter you put on the snow tires got around just fine.

@StarHunter28

Жыл бұрын

2wd is fine right up until you have to go uphill on wet grass, then you're going nowhere

Ouch that's going to be pricey

Put a adapter section in it with new hub and run it. Likely last what life is left for the car...

If you have the ability to replace the shaft clean up everything else in the place it back in

Why don't you fix the splines on the shaft? Machine shops do that all the time.

Hammer the adapter on, tack weld it and send it 😂

If it was mine it would be getting a new collar and JB weld on the ugly side and letter buck

I have a toyota prado (the Toyota version of this car) with over 300k km on the clock and been given absolute hell. Never had a problem with it. I've Never ever seen anything like this on any car before. Plenty of people here in Australia with the same car with over 600k on the clock and no issues at all. This lexus mustve definitely had someone's kid borrow it for a night and did something stupid or a very rare case of factory defect

@masterdriveroftoyotazupr4164

Жыл бұрын

Yeah some nob probably tried to switch to 4-Lo without putting it into neutral or constantly not fully stopping after reversing and putting it into Drive.

@ethanmccoy1680

Жыл бұрын

You can change between 4 wheel and 2 wheel without that happening but dropping between reverse and drive can definitely do the trick and my 02 Lexus is the same as your Prado 235k miles on the clock and almost no issues

What could’ve caused that? I’ve seen people Shift into drive while still rolling back. I was taught not to do that. It doesn’t sound good when they do it either.

@shanew7361

Жыл бұрын

Yea I agree car needs to be at a complete stop before switching gears I was taught too. So many morons in the world lol

@HowtoAutomotive

Жыл бұрын

That’s definitely a possibility of what happened. Unfortunately I did not get the story on that.

@DoubleoP

Жыл бұрын

Youngsters like to neutral drop thier parents cars. Lol

@no-replies

Жыл бұрын

You wouldn't believe how much damage that can do to a car.

@nativeoutdoors1780

Жыл бұрын

​@@shanew7361 I don't know on these Lexus cars but on trucks you can shift to 4 hi at low speeds like less than 10 mph and no tires free spinning, but it never hurts to engage in neutral at a dead stop. And after you disengage you should back up 10 feet to disengage front axle hubs. But this is trucks, I'm just saying that people arent necessarily stupid because they don't come to a complete stop

Thats what a few hot N drops will get you. Just never go hard on the R.

Bad design having a sleve like that! Huge problems with older volvos with awd having these sleves go bad.

Haha someones kid been doing them Rev dump neutral drop burnouts for the tok. 🤣

My dad has a Lexus RX with 135k miles. We think the transmission is going to be what kills the car because the torque converter is starting to go bad. We're not planning on fixing it. At the state it's at we'll probably get another 50-60k miles out of it before it fails completely then ship it off to a junk yard. If a Chrysler town and country can go 80k miles on a bad torque converter the Lexus should make it a while.

@ethanmccoy1680

Жыл бұрын

What year is it because I swear they don’t make them like they used too… my 02 ls430 barely has any issues trany is slowly going but can easily last another 100k probably with 236k already on the clock even then I may just get a trany swap and keep her running for a lot longer

🤣🤣 bruh the first time I thought he farted

Okay. Now what caused that to happen? Just normal wear or anomaly?

@StarHunter28

Жыл бұрын

Seems like a common fail point in toyotas

Honestly that hub doesnt look like it engages enough of that output shaft to begin with and likely is the reason for the failure. Looks like that hub only bites on about a 1/2"-5/8" of the output shaft to begin with. Need to legnthen the new hub to engage the rest of the output shaft and it would likely be perfectly fine with the existing shaft, actually probably be better than the stock set-up with the min engagement and a new shaft than modifying a new hub weith an extension and running the existing shaft with the damage it has. Likely be alot cheaper than replacing the trans output shaft as well. Sadly youll replace the adapter and the output shaft and 6 months from now the input of the transfercase will fail the same way because it only engages the shaft a 1/2" or so as wel

thats an a-10 brrting inside😂

Lexus GX 470 is just a dressed Toyota 4Runner!

And to the junkyard it goes.

I think a reverse drop burn out could cause that failure. 😂

Both......

Looks like a bad defect 😮

Dam someone driving the hell out of it.. spline ring easy fix.. transmission shaft damit just rebuild or replace.. either way... it's expensive good find mechanic

Thats why i drive a ford because I couldn’t afford a lexus trans

Sounds like my ass after taco day at work

Now we can spend alot of money, or a whole of money. lol

I would probably just put a new sleeve on and not replace the shaft

Eh a little J-B weld and slide that adapter right over it it'll be good to 👍 until the car takes a crap around 637,000 miles

Elephant farts 😂😂

Come on now Lexus. I want to buy a Lexus

Fuck that’s the whole car in expenses

Scotty Kilmer says flat out that shaft is definitely reusable. Scotty says he will cover it as he makes too much from KZread and it stresses him out.

I wake up almost every morning farting like that. So satisfying sometimes.

Not gunna lie i thought that noise was somebody blowing their nose

Same price to just to get a whole transmission put in

Prices are high now for most parts. Add the Lexus name to it and you look at giving your first born for repairs. 😂

20mm cannon 😅

Just like that replace the shaft or The transmission 😂. Simple $$$$$

He use 4x4 in high speed road.

@bossmass1668

Жыл бұрын

U sure?

At first I was like here we go with this nonsense... A stick shift, automatic car.😔😂😂😂

two shifters???