I've had a few people (Who know their stuff point out to me) that there are actually both GOST and NATO specific Pro 2000 filters as well, so maybe buying these is still a crap shoot.

@Lua-sj9sm

4 жыл бұрын

Oh i didnt know that, similar situation to polish filters eh? hope i didnt cause a thread mismatch. i was saying they are all din, mine are at least.

@Mike-vk3mb

4 жыл бұрын

THE Scott Pro 2000 data sheets lists this range of filters complies to EN 148-1. Which is described by thread Rd40 x 1/7”.

@martijnheil8825

4 жыл бұрын

What? Well clearly they don't know their stuff because this is plainly ridiculous. There are no GOST Pro 2000 filters. They're all stated as NATO, but apparently due to seemingly quite consistent tolerant tolerances and mallability of the plastic threads they do indeed *fit most GOST masks airtight*. It seems unlikely they are DIN threaded as old DIN thread is no longer used anywhere as far as I'm aware, and Scott has no relationship to Germany either, as far as I'm aware. There are some isolated reports of people who can't manage to fit their Scott Pro 2000 filters onto their GOST masks properly, but it seems the majority have positive experiences.

He sounds like a combine soldier when he speaks haha. All he needs is the beeping of the communicators.

@fdss-el6lt

4 жыл бұрын

Who’s gonna tell him

I use the Scott pro 2000 particulate filter on my GP5 for dust related things and used it for a while. Checked it had an airtight seal and it pressurised so I use it, nice to know it wasn't just me 😃

@vladimirabadzhiev3246

4 жыл бұрын

Are you using just a P3 filter or something else ?

@thisisthecaptain7266

4 жыл бұрын

@@vladimirabadzhiev3246 just a P3

@kompos8144

4 жыл бұрын

I have two pro 2000 p3 filters and they can replace the pbf filters (not sure if it will fully protect)

In case anyone finds it helpful, the Scott Pro2000 PF10 P3 is 1/4 the weight of the A2P3, 1/2 the price and an adequate solution for the current pandemic. Same 40mm thread.

@kingbo2699

4 жыл бұрын

Thats good to know i bought some other day for my 40mm Finnish Mask was unsure they would fit was only £7 each

@kertz5732

4 жыл бұрын

@@kingbo2699 did you buy it offline?? 🤔

@kingbo2699

4 жыл бұрын

@@kertz5732 ebay have them aswell for around £14

I have the smaller variant of this on my S10, seems to have a good seal on it and it does the job against the floating human slime and contaminants

@dashofawesome64

4 жыл бұрын

you mean the fm12?

@jobeblogs4539

4 жыл бұрын

@@dashofawesome64 no. This mask was produced around 11 years before. The strap to fix it to your head and the drinking straw are completely different.

I actually asked about this on your stream, because in your older video, you said these wouldn´t fit. I got this exact combo and I found out they fit and seal perfectly. oh, and I must mention im from Finland :)

@Weaponsandstuff93

4 жыл бұрын

Yeah as I originally assumed these were 40mm NATO not DIN.

@japejapettaja6940

4 жыл бұрын

@@Weaponsandstuff93 It´s okay I'm happy I have masks and filters that all fit together.

your welcome on this happy to help

I use those filters at work, they last about 24 hours with the amount of dust were in

4:55 It seems that you’ve been out in the sun with that mask.

@vladimirabadzhiev3246

4 жыл бұрын

Probably he bought it like this. I also have mask with rubber that got brown from the sun, and interesting the rubber (where it is brown) is realy smooth. But the sun can totaly destroy the rubber and make it fragile.

Love it, great video.

Mind blown on camera.

Yeah I've been putting these filters onto my GOST masks for a little bit, I figured that since the threads were plastic, they wouldn't damage the mask filter port and have enough give in the plastic thread to properly screw onto GOST masks. (Btw I agree that the SCOTT Pro2000 filter series has the inherent flaw of no front or rear filter cap and as a result of such, is prone to contamination.)

@Weaponsandstuff93

4 жыл бұрын

Yes that's a good point it may be a close enough sort of deal with a plastic thread.

Thank you I got the filter and it fits my gp5

Maybe that metal insert could be replaced with a 3d printed version that accepts NATO, or a thread that accepts both.

Think i could turn a PBF mask to GOST by cutting off the filter intake of a couple PMK-1 masks, unscrewing the metal bits, putting them into the intake holes on the PBF, then fastening them down on the inside with the rubber bits? Then fill the cheeks with Styrofoam or something so they don't sag.

Pmg is a great mask, my 4 take nato filters and pass aerosol tests perfectly

Good insight thank you

@Weaponsandstuff93

4 жыл бұрын

Glad to help

DIN was a metric standard but has largely been supersceded by ISO for, eg, thread forms

@lesenundverstehen8831

3 жыл бұрын

DIN means „Deutsches Institut für Normung“

Cool! Wondering if this will fit GOST masks as well, this one is available here. Pro 2000, the model specification is I think is CF22 K2-P3

my family of 4 Scott gas mask SARI RD40 full face respirator arrived today. i dont plan on going out yet though.

The last mask is constructed like that so you can convert the mask to run a re breather

Great Video. Good information to know in these trying times. BTW, have you seen the new Combine Soldiers in Half Life: Alyx? It looks like they finally have the filters on correctly. They even have a new unit with a GP-5 looking mask.

Would the other Scott Pro filters work with the gost masks? Because for some reason my Scott Pro P3 particulate filter screws on perfectly on my MUA Mk.2 mask, but not my GP-5, or the hose.

@RyanShiels

4 жыл бұрын

My Scott P3 filter screws on fine to my gp9

I tried orange oil instead of banana oil. Seems to work well. Much more pungent atleast to me.

I got 2 of those filters last week.paid £15 each.same issue with ripped bags

@lastofthesarcastic7682

4 жыл бұрын

Where can you get filters and masks for good prices that ship to Canada? I have a budge and trying to fit stuff in but everything expensive on ebay

@kertz5732

4 жыл бұрын

@@lastofthesarcastic7682 same

@compositebook7874

4 жыл бұрын

tumbo1984 i live on the us and filters are more than 50$

@tumbo1984

4 жыл бұрын

Composite420 book they are usually expensive this side to buddy,just the store had over 500 of them as surplus from the mod...they expired end of 2019 and yes they have flew off the shelf lol

@compositebook7874

4 жыл бұрын

tumbo1984 i had to make my own filter

Question, im looking for a mask with the "scare factor" of how it looks for video production but I want one that is practical and functional. I was thinking of using a GP-4 and get a modern filter for it. But I like the anti fog of the GP-5 but I actually want a mask that feels comfortable enough to wear for a long period of time which Babushka claims the GP-5 is not (especially with fluffier hair). So do you know of a mask that has the look of the GP-4 or GP-5 that has the anti-fog and fits well. Furthermore If I were to get the GP-4 are there any brand of filters you would recommend including these scott pro filters? PS a voice diaphragm would be preferred but not necessary.

@auxometer

3 жыл бұрын

From what I heard the gp-4 or ML don't really dog up so much. Idk, you could just smear some soap on the lenses, worked for me with the gp-7

Would I be fine using a p3 3m filter on a 3m half mask in an environment where there is mold around?

I want to buy a gp5 gass mask cause i want to use it for a uniform set im making for airsoft but where would I reliably buy one that doesn’t have the aspestos filter ps im in Australia

this is off topic but a couple years you tried refilling a plastic Chinese filter, could you discard the charcoal altogether and use p100 filters for covid 19 use.

What if you don't want to use your filter up on a gas mask? For example with this Coronavirus. Could you a HEPA filter as a makeshift???

Do you think that vacuum sealing these Scott PRO filters yourself with a vacuum food sealer would extend the life span of the filters? Especially if you used a foil lined vacuum bag?

@Weaponsandstuff93

4 жыл бұрын

Yes I believe so

another great info on filters I have a volks mask vm 40 with straps the filter says 38 on it is that the year ? and what years were they made thanks josh

@Weaponsandstuff93

4 жыл бұрын

Could very well be a 1938 filter, VM37, VM40 and VM44 filters often all used the same filters. So any date from 1937 onwards would make sense.

I mentioned this worked on my CM4 on one of your vids a while back

@Weaponsandstuff93

4 жыл бұрын

And you were right

@peacemaker6460

4 жыл бұрын

@@Weaponsandstuff93 I must admit, I only came here when looking for a gas mask for the pandemic, now I am thinking about collecting world gas masks, already have a black gp5 on the way now, I blame the lockdown ha ha

@Weaponsandstuff93

4 жыл бұрын

@@peacemaker6460 Yeah get's tempting to keep comfort buying stuff, currently I need to ban myself from eBay to prevent constantly buying more Geigers/radiation devices lol

@peacemaker6460

4 жыл бұрын

@@Weaponsandstuff93 ha ha, normally I would be all over ebay emptying my bank account for pm's but everyone is panic buying and dealers are not selling atm, prices are through the roof on ebay so i need to fill the buying gap with something a little more affordable, surplus gas masks are doing it for now

Does is work with the SHMS?

Did you test it on the SHMS after the video?

Consistently good content

what would you say your current fav gost mask is?

Where can i buy one?

Hey I have a little question and Google couldn’t answer it to me. I bought a gas mask with Ammoniak and FFP3 Filter if I wear the filter and mask how long can the filter be on the gas mask or can I somehow close the filter when I don’t need it anymore. Dose the filter even expire when I opened it up and put it on my mask while I am not using it? If anyone could help me that would really be great

@Just_Xiva

4 жыл бұрын

Morpheus 2015 filters will only not expire if they are in a vacuum, you can preserve the contents of the filter by plugging the screw thread and the intake hole, by doing that it slows down the rate of which it expires, ultimately stopping it from expiring

@morpheus2615

4 жыл бұрын

Just_Xiva oh ok so I just put the filter when I don’t need it into a plastic bag and pump all the air out with an vacuum cleaner. Thanks

@vladimirabadzhiev3246

4 жыл бұрын

@@morpheus2615 if you were exposed to biological or radioactive things with the filter use the filter only once. 1 if you are using only particular filter you need to change it when you feel it hard to breathe. 2 particular filters dont expire in my opinion because they are just a material something like paper and they just stop particles in is physical and not chemical protection. When the filter gets nasty and full of dust and you cant breathe from it just change it. Use common sense. Weaponsandstuff93 has a video for this topic.

@morpheus2615

4 жыл бұрын

Robert The Niga weaponsandstuff93 has so many videos and produces so many that I couldn’t find it, but thanks nontheless

Din was another name for normalised thread

if it isn't bottoming out on the rubber seal, then some thread tape will seal it up fine.

So next question is, Is the 40mm NATO/STANAG thread in fact a M40 ISO thread form?

@martijnheil8825

4 жыл бұрын

No definitely not. It's a type of knuckle thread with a thread pitch of 1/7" (~3.629 mm) as opposed to GOST's 4 mm thread pitch.

Getting the smaller version of this one for my own GP-5 as that one looks hella bulky

@Weaponsandstuff93

4 жыл бұрын

yeah it is lol

@OldBeanUK

4 жыл бұрын

@@Weaponsandstuff93 The funny thing is though, I saw these Pro Scott filters on Amazon and Ebay but I wasn't sure if they would fit on a GOST thread and low and behold you made a video on them showing they do XD

@Weaponsandstuff93

4 жыл бұрын

@@OldBeanUK a few of my viewers were pretty confident they fit and wanted me to confirm it

45mm? Cans are available in this size...

31 seconds. Wow! (also, your videos are amazing and the discord is great)

@tmselection9321

4 жыл бұрын

"the discord is great"

@tmselection9321

4 жыл бұрын

if you're a snowflake

@dourrookierookie775

4 жыл бұрын

@@tmselection9321 did someone hurt you?

@MoneyForFun255

4 жыл бұрын

DourRookie Rookie I think his dad got the belt.

I googled EN 14387 and it shows that full name is DIN EN 14387.

I'm wondering if you used to serve in the military cause there are some countries in European union and NATO that have GOST gas Poland Czechoslovakia Romania Bulgaria and Slovenia that have them

How do I find the link to your Discord server?

@MoneyForFun255

4 жыл бұрын

Anatoliy Volkov Тебе надо дать донат ему на стрим. 1 доллар минимум

@Jamima-js1xf

4 жыл бұрын

I think you have to donate

@darren970

4 жыл бұрын

You need to donate or buy something off his store

What does he use to test it?

@jimbo6769

4 жыл бұрын

He refers to "Banana oil" usually, I'd imagine it's actually Isoamyl acetate but idk for sure.

@Weaponsandstuff93

4 жыл бұрын

Banana oil/Isoamyl acetate a very strong sweet smelling liquid.

So to recap, this filters can fit NATO thread mask's and (in most cases at least) GOST thread masks? I can find the SCOTT CF32 ABEK2P3 2000 series. They fit both..? Thanks in advance.

@Weaponsandstuff93 funnily, you can screw a GP7 filter cap to the screw in the PMK1. One of my friends bought a GP7 and instead of a normal intake, there was a filter cap lol

Is 20£ for this filter but with ABE2K1P3 level? Edit: in date

@Weaponsandstuff93

3 жыл бұрын

Yeah £20 is a bit much for one filter, especially as they seal these.

Do they work on the wuhan virus?