testing HB Rover and Proline Ibex Ultra
Автокөліктер мен көлік құралдары
RC4WD bully 2
Modified chassis - No skid plate
Tires: Hot Bodies Rover 2.2 white
Foams: CI dual stage foams (5.5" narrow comp cut, medium outer + tuningring)
Knuckle weights (front 184g each, total 368g / 12.9oz) (rear 57g each, total 114g / 4oz)
Battery pack: Turnigy 500mAh 3S Lipo-Pack TX6
Shocks: DravTech Comp Shocks
Dual motors: Team Brood Creep Hand Wound Brushed Motor (45T)
Pinion gear: 14 tooth front and rear (Motorritzel 14Z)
Servo: Savöx digital SA-1230SG (36 kg Stellkraft)
BEC: Castle Creations CC BEC 10A
2x ESC: Holmes Hobbies TorqueMaster BR Mini
Programing: Castle Link V3
Radio: Futaba 4PLS
Receiver: 2.4Ghz T-FHSS
Total weight: 2.424 kg
#rc4wdbully2
Пікірлер: 26
I love my mini rovers and my ruptures same pattern ish….only have rc4wd pins and they good too…but not quite as much grip for my rocks here
@rcrockcrawler
18 күн бұрын
I love my good old rovers, both 2.2, 1.9 The best grip I get from the Voodoos. Raptures are nice N tall.
This look so amazing,, any more pics or video on how to do the no skid mount?
@rcrockcrawler
Ай бұрын
Thank you very much! I know, I’ve posted more pics and recordings viewing from different angles. Best you search the playlist. I haven’t done build videos.
Crazy design!
@rcrockcrawler
3 жыл бұрын
Thank you, Mr Sausage!
power crawler!!!👌
@rcrockcrawler
5 ай бұрын
Thank you! 🤜
Man, thats an awesome rig. Love that clean look. Was wondering how you packed all electronics? Do you have more detailed photos or videos of your rig?
@rcrockcrawler
3 жыл бұрын
Thank you, RedChiefAI! There is a "RC4WD bully 2" Facebook group in which you can find pictures. Search "no skid plate" I've was able to moved the battery and lipo saver on the front axle.
Hi ! Where did you find the front Big knuckle weight ? I found the rear (s1202), but not the front on your pics.... Thanks.
@rcrockcrawler
3 жыл бұрын
Another member of a German forum I'm in made them for me. I guess, he can make some for you.
Very capable build! What insert are you running in the ibex?
@rcrockcrawler
3 ай бұрын
Thank you! I've since made a few changes to the suspension setup and have 3D printed axles (lighter and more clearance). Need to make an update video.
@rcrockcrawler
3 ай бұрын
I've got narrow 5.5" inners both front and rear. Rear outer medium and front soft.
@NovemberFoxtrotRC
3 ай бұрын
@@rcrockcrawler Right on! What company makes them? I just got a set and need inserts.
Hi I try to put HB rover tires 2.2 on origine bully wheels...the beadlock can't take the tire in entire... Have you specific wheel ??
@rcrockcrawler
3 жыл бұрын
THX, the original Bully wheels are great. Take a look: kzread.info/dash/bejne/ap6Iubijnt3fpNY.html I hate gluing the tires. But what I'm using now are 2.2 buggy front wheels. I drilled three M2.5 holes for the wheel hub and added the large holes for optics. The advantage is that it is much lighter (less rotation mass) and more space for larger/heavier knuckle weights. See here 0:25 I've got these in black.. www.t2shop.de/epages/61746328.sf/de_DE/?ObjectPath=/Shops/61746328/Products/18-AE92095
how do the Ibex tires perform compared to the Voodoo pin tyres?
@rcrockcrawler
3 жыл бұрын
I find the Ibex tires a little too soft and the Dlux a little too hard. Voodoo pin are the best; imo.
nice mod ! it's the ventru lower links ?
@rcrockcrawler
3 жыл бұрын
Thank you! All links are homemade, but inspired by Pat's ventru.
he du fährst ja auch die weights vom bluna oder täusch ich mich da?😜👍
@rcrockcrawler
3 жыл бұрын
Ja genau, das sind die von Bluna. Deshalb hatte ich den Spruch "Sind wir nicht Alle ein bisschen Bluna." beim ersten Foto einblenden lassen.(Als Insider und Anerkennung.. da ich davon ausgehe, dass so Einige von uns sie installiert haben und somit (wir) Alle ein bisschen Bluna sind. 😁) Aber um Missverständliche zu vermeiden, habe ich den Spruch unkenntlich gemacht.
Are they about the same height?
@rcrockcrawler
2 жыл бұрын
Yes, they have about the same height.