did you say two days to arrive? (Uk) could i have the link for the seller you was using thanks
@8bittoaster Жыл бұрын
lol, what was going on outside at 1:37 XD
@baistosh2 жыл бұрын
i think its missing some steps,,,other youtubers adding a resistor somewhere at the back of xbox360? dont you need these?
@amateurrepairs8193
2 жыл бұрын
YES IT HAS A 10K Resistor
@jogopoulos1831 Жыл бұрын
also . is not neded software fpr pico ? (flash software on pico ) ?
@amateurrepairs8193
Жыл бұрын
Simply hold the BOOTSEL button down on your Pico and plug into your computer, it should show up as removable storage. Click and drag the UF2 file to the Pico in your file explorer. The device should automatically unmount on completion.
@amateurrepairs8193
Жыл бұрын
github.com/X360Tools/PicoFlasher/releases/
@ahmetokur4939 Жыл бұрын
Is it possible for Jasper mainboard ?
@Museo_del_Videojuego
Жыл бұрын
kzread.info/dash/bejne/g32NmrSvaLqqeqg.html
@madvelila Жыл бұрын
I'm good at soldering all the solder points were perfect. I was still not able to get the programming software to recognize my trinity motherboard. I used pico flasher and got error code: "console not found" 😢😢😢
@Toydota
Жыл бұрын
Do you have a 4gb corona?
@DurzoBlunts
4 ай бұрын
You sure you identified your board correctly?
@madvelila
4 ай бұрын
@@DurzoBlunts I will look into this.
@madvelila
4 ай бұрын
@@Toydota I will look in to this
@Toydota
4 ай бұрын
@@madvelilaI think I also had the same problem and it was because i didn’t fully connect the pics flasher to the console, but I redid and it worked. Maybe you didn’t connect the right points?
Пікірлер: 16
did you say two days to arrive? (Uk) could i have the link for the seller you was using thanks
lol, what was going on outside at 1:37 XD
i think its missing some steps,,,other youtubers adding a resistor somewhere at the back of xbox360? dont you need these?
@amateurrepairs8193
2 жыл бұрын
YES IT HAS A 10K Resistor
also . is not neded software fpr pico ? (flash software on pico ) ?
@amateurrepairs8193
Жыл бұрын
Simply hold the BOOTSEL button down on your Pico and plug into your computer, it should show up as removable storage. Click and drag the UF2 file to the Pico in your file explorer. The device should automatically unmount on completion.
@amateurrepairs8193
Жыл бұрын
github.com/X360Tools/PicoFlasher/releases/
Is it possible for Jasper mainboard ?
@Museo_del_Videojuego
Жыл бұрын
kzread.info/dash/bejne/g32NmrSvaLqqeqg.html
I'm good at soldering all the solder points were perfect. I was still not able to get the programming software to recognize my trinity motherboard. I used pico flasher and got error code: "console not found" 😢😢😢
@Toydota
Жыл бұрын
Do you have a 4gb corona?
@DurzoBlunts
4 ай бұрын
You sure you identified your board correctly?
@madvelila
4 ай бұрын
@@DurzoBlunts I will look into this.
@madvelila
4 ай бұрын
@@Toydota I will look in to this
@Toydota
4 ай бұрын
@@madvelilaI think I also had the same problem and it was because i didn’t fully connect the pics flasher to the console, but I redid and it worked. Maybe you didn’t connect the right points?