The enclosed garage looks great .

@scottbrady6240

23 күн бұрын

Bro has leveled up for sure, real fine like.

@MikeBaxterABC

23 күн бұрын

I thought for a minute Andrew put a power operator n the roll up door! :But nope (good) the stock operators on it are just smooth! :)

@citichap

23 күн бұрын

@@MikeBaxterABC I think Andrew opted for the chains instead of a power motor is because it's a great way for him to keep in shape.

@xiangjiashen4060

23 күн бұрын

The enclosed garage is way better then the old

@andreydre3653

23 күн бұрын

He is becoming the Westin diesel of work equipment 🙌🙌🙌

Sitting inside the hopper of a rock crusher AS IT IS RUNNING is definitely one of the sketchier things Andrew has done.

@TheSubatomicCheese

23 күн бұрын

And sticking your hands in the hopper trying to hold advancing rocks back as it's running. And trying to move it/get it unstuck while standing on a pile of rocks behind and having it roll back. One literal slip-up off those rocks and it could have easily rolled back on him. In the long run, that little machine is an accident waiting to happen if Andrew keeps it. A larger machine is more stable, easier to move (read as, safer), and could handle more rock easier (again, safer).

@rider573

22 күн бұрын

And almost rolling it over off the pallet 0.5 seconds after starting.

@bjem2287

22 күн бұрын

I am getting concerned that Andrew is drawing ever closer to getting a serious injury. I'm the same age as him and you can't keep doing the things he does forever.

@WoLpH

22 күн бұрын

Honestly... it doesn't draw you in so it still seems one of the less sketchy things he's done if you ask me. I fully trust him to not get hurt as long as he's paying attention, I just hope there won't be a day when he's a little bit off his game...

@Splunkzop

22 күн бұрын

@@rider573 I was thinking he would be setting up a ramp to drive it off the pallet without tipping it. Next thing he does is tip it over. Sitting on the machine while it is running? If he does stupid things all the time, how is he still alive? How does he still have all his limbs? If he is that lucky, he should buy a lottery ticket.

hey Andrew, I used to work in an aggregate mine that ran jaw crushers, and we had one of the largest ones in our company. the jaws on that mini one don't look like they're any sort of special material, maybe cast steel. you should most definitely be wary in that sense because with harder rocks (granite, etc.) are prone to shooting back out of the jaws. one thing we do to minimize that chance as much as possible, is our jaw plates are chrome steel-structured and manganese-faced. if you're looking into keeping that unit long-term (which I wouldn't recommend, by the way. it's laughably undersized) is to definitely look into those types of jaw plates for your own safety, others' safety, and the longevity of your crusher

@LibertyDankmeme

23 күн бұрын

this one is actually a good size for walnuts at christmas time

@young11984

23 күн бұрын

That machine doesnt have longevity designed into it anywhere for Andrews work ethic, about 3-4 times of moving it and having to push it around it will probably be pinched up in a bucket😂, maybe the larger one will have more power and move effortlessly.

@LibertyDankmeme

23 күн бұрын

@@young11984 yea i know - the walnut crusher thing for Christmas time is a joke

@guytech7310

23 күн бұрын

FYI: From upsen specs: "The jaw plate is made of high manganese 18" If it was cast steel it would broke already.

@TechGorilla1987

22 күн бұрын

I used to help replace the 10K lb jaw dies on large primary crushers.

I believe the last scene should be it trying to get on the trailer to take it back. Thank you for showing us this machine.

@andreasbertram2761

22 күн бұрын

This thing comes from China. If you ask to bring it back you will get in for free.

@grahamparkin2465

20 күн бұрын

I believe the last scene for this piece of crap is driving it off the driveway with the car he did that too!! lol it's a toy

No instruction manuals were read or harmed in the production of this video 🤣 Andrew, please never change, you are perfect 👍

@einfelder8262

23 күн бұрын

Yep, funny how it tracked without the crusher mechanism engaged. Shame about the sparks flying out of the clutch, though.

@ionuti2658

23 күн бұрын

what manuals, it's written all in chinese

@olliwhosu5593

22 күн бұрын

Instruction for 1 Startbutton and 3 Valves🤣🤣🤣

@aussiegarbo752

22 күн бұрын

I especially love the fact that he touched the grounded frame with the positive then he said "Don't do that" HAHAHAHAHA!!

@Arthur-ch2dx

22 күн бұрын

Did you not know that there are radioactive elements of thorium, uranium, etc. in the stone, they create a radiation background! Especially if they lay for hundreds or thousands of years, as in these mountains!

3 minutes in, and we are already rewarded with those actions, only Andrew could give us! Thanks man :)

@stevec4011

23 күн бұрын

Absolutely!

@kwmiked

23 күн бұрын

The pause and the look, Did I just buy this thing was great 😂

@Adventures_with_Josh

23 күн бұрын

​@@kwmiked he didn't buy it, he was testing it

@midnightkaos

23 күн бұрын

and then some times he wonder why this broke for no reason

@willb3018

23 күн бұрын

Don't do that. 😂

I still can't get over the fact of how nice your garage looks. It's too nice to call it a shed, by a mile.

Andrew has such nice material there. Almost driveway ready even without the crusher... I wonder how this machine would fare on some new england granite.

Andrew, this mini crusher is definatly to small for your business. It`s a toy for a owner of a back yard. The right size is up in the hill ! 😁

@jrogertrudel6356

23 күн бұрын

Agreed

@MrPGT

23 күн бұрын

Or used as a second stage, fed by his big crusher.

@retro8696

23 күн бұрын

I just took off like 3 tuck loads of old busted cinder blocks this thing would have saved me a lot of time and I could have used the powder/crushed cinder blocks for filling holes.

@TsunauticusIV

23 күн бұрын

This “crusher” is a joke. What a pos. 😂

@MikeBaxterABC

23 күн бұрын

I thought it might be good for a small hobby type gold prospecting mine! .. would't take too much gold to pay back??

Seller: "This thing is indestructible" Andrew:"Hold my beer"

@777cygnus

23 күн бұрын

😆👊⚙️

@oriwittmer

22 күн бұрын

*drives it a-over-t off the pallet

“Instantly knocks it over” “Don’t do that”

Great. Really impressed with your thoroughness in lubing and checking levels on a brand new machine

Something good to watch on a boring afternoon. Thanks Andrew

@AndrewCamarata

23 күн бұрын

You’re welcome

@sprintcarsandguitars959

22 күн бұрын

@@AndrewCamarata i thought you were going too rename it,the shale master 2000.

@FinnMikazuki3

7 күн бұрын

hello ​@@AndrewCamaratawhat excavator can you hear running in the background when the mini rock crusher engine shuts down

@KupaTuska

6 күн бұрын

@@FinnMikazuki3 The little yellow in behind.

@FinnMikazuki3

6 күн бұрын

​Hello​@@KupaTuskathe big orange excavator is the excavator running in the background when the mini rock engine shuts down

Best channel on all of youtube right here... 10/10

@FrassoFra

23 күн бұрын

Nah jesse muller or diesel creek are better

@BillySBC

23 күн бұрын

It's 9/10 without Sammy though.

@CerebralAilment

23 күн бұрын

Those are both basically Camarata spin offs lol

@Maximusprimeatyahoo

23 күн бұрын

I love Jesse also but Andrew is king@@FrassoFra

@FrassoFra

23 күн бұрын

@@CerebralAilment i cannot agree with you

That is incredibly neat. I've seen those super cheap little AliBaba imported Chinese jaw crushers and they apparently work pretty good but this is on a different level, would be pretty ideal for a small property owner. "Survived testing by Andrew Camarata" should be some sort of industry certification at this point

@chrisgodfrey-um9yz

17 күн бұрын

It is a cute toy but given the effort and time I am sure you can get granular a delivered cheaper

17:26 my favorite ASMR 😁

@TeddyBaer-ok1fq

19 күн бұрын

Me too

I always was proud how much my Landrover series 2 diesel smokes under load. But this piece of chinesium is master in blowing smoke.

@mikehunt3222

23 күн бұрын

It gives a whole new meaning to the phrase “rolling coal”. 😂

@atomicwedgie8176

23 күн бұрын

'rorring coarr'

@bradh5629

23 күн бұрын

she was a huffin and a puffin, do dpf seen in sight lol

@guytech7310

23 күн бұрын

its only got a 14 HP engine in it. Probably to reduce the chance of something breaking. Some times machines are under powered because more power causes parts to fail.

@user-su8oq6wh5h

12 күн бұрын

Don't think that little engine will last many hours, you know it's as cheap as possible.

I really like that this guy does not talk, as many are doing, he shows the job

@bradh5629

23 күн бұрын

that's why I have watched everyone one of his videos since he started with a little ford tractor i don't even know how many years it has been now lol, the time does fly by, his content is my favorite of all the interwebs

@wesman7837

22 күн бұрын

Well, he does a little bit sometimes in a few videos, but I agree, it is nice that he isn't like a lot of other YTber's who spend more time yapping about what they are going to do than actually doing it which is annoying!

@ronaldlee2376

21 күн бұрын

Too many channels ( my opinion) exist for sole purpose of their insatiable need for an audience for nearly every facet of their life. This ego trip, so many of today's people appears to be be of epidemic proportions. Not "me too", but me, number ONE.

@johndowe7003

20 күн бұрын

Oof you hit the nail on the head. Lotta these guys just yap.for 10 minutes before getting to the point. Worse than any mother in law 😂

@ronaldlee2376

17 күн бұрын

@@johndowe7003 Well put

Testing a mini rock crusher...The enclosed garage looks great .❤👌👌✔✔🚂

Only on these vlogs will one learn the limits of a piece of machinery. No one does it like you mate. Cheers !!

"Fisher price my first crusher" Nice little piece of equipment, Andrew. Great for DIY garden renovation jobs where paving slabs need recycling for hardcore to make a slab or Pathway. Small enough to get through a side gate or doorway and small enough to position by the sofa at Christmas to crush your walnuts

@bigc8300

23 күн бұрын

Mine was a Tonka! Got you beat.

@MikeBaxterABC

23 күн бұрын

Lol .. My first thought as it's be nice for a small gold prospecting mine !

@HANKTHEDANKEST

22 күн бұрын

@@MikeBaxterABC Yeah actually, would be a brilliant addition to a small gold operation. Good thinking!

When Andrew says "don't do that" you should probably listen.

@JackMacLupus

23 күн бұрын

Agreed! Same when he says: "I have the feeling, if i keep going, stuff is gonna fall on me." XD

Awesome and outstanding as always.Thanks for sharing and taking us along

Watched you build and finish the garage...it looks great next to the Castle Camarata....and great job showing that a brand new machine is not always "ready for work" 🍻

That stone block effect on the workshop looks mint

@wesman7837

22 күн бұрын

Yeah, that turned out really nice!

That would be great for old cinder blocks and bricks.

@TreachourusJdogg

23 күн бұрын

This is actually a great idea. Crush it up into road base or fill!

@justinepaula-robilliard

23 күн бұрын

Damn thing choked on a leaf, AC tossed it a peddle, it broke down, really this thing should be taken to recycling for turning into lawnmower blades...

love how Andrew checks all the fluids and greases nice work sir

Andrew is the kind of guy that changes the oil on a rental car! Always leaving things better than he found them!

@stunna7807

23 күн бұрын

Ya but returned with fenders welded on and switches installed to operate the wipers

@hpw59

23 күн бұрын

And a new radio installed with a chainsaw

That thing smokes like a cruise ship lol

@terryboyles2235

23 күн бұрын

Could have bought all of your production for 75 dollars, quit Playing with this toy. and buy Two more sizes up, save your time for better work!

@gorak9000

23 күн бұрын

Maybe it also runs on bunker oil

@professionalstreetniqqa

22 күн бұрын

lmao

This thing reminds me of the elephant and the streaker. Elephant said to the streaker, "it's cute but can it pick up peanuts"! For what it's worth, it's probably cheaper and easier to have a few loads of what this thing produces and have it delivered! Looking forward to your next videos! Marc: Edmonton Alberta Canada.

@firesurfer

23 күн бұрын

The best use of this is driveways and backyards where the only access is a small path and getting rock delivered is impractical.

@utooobur

22 күн бұрын

But getting it delivered doesn't clear the property of the larger rocks. He is accomplishing two for one.

Looks like it would work perfect for someone to just own for home driveway maintenance! If andrew gives it the "Should have a bigger motor/gear reduction" But give the thumbs up afterwards.. Im sold :P

Andrew, thanks for the video. Always love your videos, I'll be waiting for the next. Be Safe, and God Bless!

Well done for greasing the machine before you started to use it. I noticed that the lower end of the conveyor belt was getting a build up of material underneath it which will in the long run cause excessive wear,and the exhaust fumes were a bit much when it was overloaded ,Apart from that it seems okay, I would say that it is more suited to crushing building rubble 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

That mini rock crusher looks like one of those square power droids that go “Gonk!” on Star Wars! So funny!

@Helyx525

23 күн бұрын

I immediately searched the comments for "Gonk". Was not disappointed. lol!

@talon0863

23 күн бұрын

Oh yeah... I thought I recognized him from somewhere!

@juanfigueroaduarte8851

23 күн бұрын

Traductor a Español

@guytech7310

23 күн бұрын

Nope, That machine is the brother of Bender Bending Rodríguez & great grand son of one of the robots in Silent running!

Small rock crusher. Perfect at what it is designed to do - small scale crushing of small rock. But the one thing we love about Mr Camerata is he's not afraid to push the envelope when testing equipment. Some of those rocks were maybe a tad too large for the crusher!

@markthompson4885

19 күн бұрын

If they fit in the chut there game

Man, I sure do love watching your videos. ♥️👍🙂

So nice of Harley Davidson to lend you their latest machine, just a shame they're still all noise and no power!

@DanKoning777

22 күн бұрын

Makes you wonder why HD still sells so any of them. 🤔

@HANKTHEDANKEST

22 күн бұрын

@@DanKoning777 Marketing is a hell of a drug.

@lunchboxproductions1183

21 күн бұрын

​@@DanKoning777Because midlife crises and fragile masculinity are a thing.

@grahamglencorse307

16 күн бұрын

For a T shirt company they sell a lot of bikes

Dude. The unloading made this your best video in a while.

That would be really nice for masons redoing concrete driveways. They could crush the old concrete on-site and use it as base material for the new pour.

@TwoFingeredMamma

20 күн бұрын

Masons don't do driveeways they do witchcraft. Irish travellers do road works.

Thank you sir for creating these videos!

This will be cool if this guy gives you machines to demo. I know I appreciate you showing us the latest stuff out there. I had no idea they had these little baby plate crushers. There's probably a lot of other stuff I don't know about too. Can't think of a better guy to show it to us. Bring it on.

@davidnaudi2601

22 күн бұрын

I went and brought a mini excavator after watching Andrew and it’s a great help.

Loading that little thing with your Hitachi is hysterical 😆

@TwoFingeredMamma

20 күн бұрын

I would be able to load it quicker using chop sticks.

I love it. A mini excavator for a mini rock crusher. Andrew you are great.

kudos for showing that pallet dive- i was thinking that could happen

That thing is giving off Gonk Droid vibes. Love it.

@benpark2658

23 күн бұрын

Exactly what I was thinking lmao

I got freaked out when Andrew sat atop rock crusher bin, while the machine was running!!! Andrew, don't be foolhardy! Accidents do happen!

@philanna38

23 күн бұрын

Ya!

@firefly2472

23 күн бұрын

This. That was not needed.

@ChuckKirchner-se6ib

23 күн бұрын

Stop worrying. The engine would just quit.

@mattc3368

23 күн бұрын

It woulda just bogged down and stalled when it got up to Andrews brass balls anyways... lol

@jerrygibs8120

23 күн бұрын

Love ya bro. Be careful. You're still young and we are looking forward to you making another million videos 🙂🤠

Man... I'm really amazed that you kept calm all this time when stalling or jamming... Engine smoked too much and it's going to need oil refill after a couple of days... When I saw the first mini crawler I said ok it's suits for the job, but as the Toyota came to play, it was a small crasher and as the beast crawler came to play... it's a tiny tiny little crasher for all that job!!

I admire your patience Andrew.

We can always count on you, Andrew to provide a "real world" - no punches pulled, review of these products before we slap down our hard-earned cash.

Must've been quite a salesman to even get you to test it😂

@nathanmcgonis9430

22 күн бұрын

I bet he could sell a ketchup popsicle to a woman in white gloves!

Yes Andrew I think the bigger crusher would make a major difference for what you need it for. Also the garage is looking great you must be happy with all your toys being all closed in, great job as always bud.

I love the rock crushing/road work videos. I've watched the 3 hour one twice

Mini equipment for mini jobs! I like the size of the material.

The oil bath air filter is a good call on a rock crusher. You don't see those too much anymore.

That new garage is looking good

Andrew is the best period! All 3 are pretty smart cookies!

Andrew has the suitable toy for each job! Good for him!

Andrews channel is up there with the best of them. Change my mind 😊

I would be very interested in seeing the bigger one. Good job on the video for this one.

Had to hand feed it, tracks couldn’t move its own weight, moved to a lighter material and still had a tough time… gotta give this one a fail! Thanks for the demo!

Cody keeps looking like Levi, great video and yeah that machine is doing its work.

I personally would choose the larger one .Thanks for sharing

@4PeTe2

23 күн бұрын

he has a larger one - a much larger one

@rhondasweeney7271

23 күн бұрын

@4PeTe2 I know he wants to try one a little bit bigger than the one he used on the video .

I have to say, I love the new garage

That is adorable! Goes great with the Briggs and Stratton mini excavator

Thanks for keeping it real, your authenticity is refreshing

3 minutes in he already flipped it. classic Andrew

@tuju-

23 күн бұрын

And instant restart even the oil has gone into places where it normally doesn’t 😊

@aserta

23 күн бұрын

I mean... it's a rubbish design that doesn't make an iota of sense. Who'd even need a crusher that narrow gauged? Is it for mine operators in the 19th century, operating rock crushers inside coffin levels? It's stupid and top heavy, should've had bigger and wider tracks. For once, it's not his fault.

That was perfect Rock crushing music!

Thanks for the upload Andrew

Props for showing the accidents as well.

I can see this being super handy for very specific odd jobs or tight spaces. But it's tendency to clog probably justifies just getting a little bit bigger of a crusher.

How cute. It’s like watching him play with toys. lol Love the vids Andrew. Been watching since the castle build

Andrew is definitely going to tear that up 😂. Give him one day, thing will be scrap metal. Ain’t had it an hour and he almost tipped it over 🤣. Thought he had a giant rock crusher, or did he just rent that?

Everyone should have one of these. For around the yard, fixing up your driveway, etc. Awesome piece of machinery.

@Paultimate7

21 күн бұрын

i would not call this toy awesome. cute maybe

@TwoFingeredMamma

20 күн бұрын

It's a hire by the day toy. I would not waste money buying this.

That little motor is fighting for its life😅

Wow Andy!! You have your own quarry!!

It’s nice to see an oil bath filter on something new. They are great.

After my heart almost dropped seeing the machine tip over I am shocked that the machine didn't come covered in cosmoline to stop all that rust and corrosion.

@aserta

23 күн бұрын

Nobody does that anymore, that costs money, money the CEOs don't have to spend, they need big yachts. It's expensive to make one. Be reasonable, think of the poor CEOs, all that ... hard work they do every day, sitting around and watching paint dry.

@AW-Services

23 күн бұрын

It's evidently been used for demonstrations

@vincei4252

23 күн бұрын

@@aserta Did you see the story of the EV company that went bust because it used twice the money the company made to fund the CEO's jet.

@vincei4252

23 күн бұрын

@@AW-Services I hope Andrew got a big discount.

@bobgrob4

23 күн бұрын

@@aserta and their jets are getting old.

5:43 Brand new its never been greased’ It’s tracked over 2 metres and 1.5 meters of that was on its front idler at an ungodly angle so technically speaking she’s second hand Andrew 😂👍🏼 Quality intro 👏🏻👏🏻👏🏻 You were clearly overloading that little engine Andrew perhaps only fill half the skip before putting the next bucket in might help. Also perhaps invest or make a riddle bucket for this machine so less fines / contamination go through into the finished product 👍🏼

Made great filler for your driveway imperfections. Reviews are always interesting, thanks.

Cool little machine and very useful if you manage what you are crushing; I can see it being very useful to you.

Thanks for giving me an excuse to knock off work early today....lol. I've been standing on a Toro Mini skid steer for 7 hours straight digging and hauling topsoil for a Japanese Wabi-Sabi Garden.

Really enjoy your videos. Your new shop is perfect.

I like when you stick to your big machines that work like they should.

Its not the first time I see that you do not know that awesome invention from Mr. Shovel👌

Camarata is quality viewing !!!! Content, skill, knowledge & confidence are awesome !!!

Love the setup like the fact that you get things that would be useful for top dressing a drive with smaller crush

Neat compact machine, I hope the manufacturer is watching and takes your feedback into account on the next generation. Not sure how it fits in your business model…. 💪👍🏼

out of that shale you are getting incredible road/drriveway base

I love work. Can watch it all day 💪🏻

This small machine is intended for crushing tiles, bricks and concrete when demolishing a building. Not for mining use.

@tnolan3176

23 күн бұрын

Crushing concrete might be a stretch ! It couldnt crush little rocks !

@AndrewCamarata

23 күн бұрын

Yeah, that probably makes more sense for it anyway.

@HANKTHEDANKEST

22 күн бұрын

@@tnolan3176 Concrete smashes up much easier than the bluestone (hard sandstone) at the first site. It'd be fine for chewing up old, scabby bits of foundation, floor or WHY as long as the rebar was out of it. Absolutely good for brick and tile, and as long as your disposal guy doesn't charge by weight then more compact garbage is more better, always.

Thanks brother for the great content. Plz keep it comming

This is definitely a niche machine. Kinda hard to imagine many practical applications

Thank you for the great videos. I’ve been watching for years and they never disappoint. I appreciate all the work you put into them, I also very much appreciate that you haven’t stopped making them. Cheers.

I'm saving this for after work tonight, Thanks Andrew.

glad Andrew has the patience I would have had it back on the pallet by now.

Great video Andrew! I wish you could have heard me yelling NO Don’t Do It when you tried to take it off the pallet….Haha! I think the belts are way too loose is why it keeps jamming. It probably has to be something you have to get the feel of to run smoothly. Thanks

the chrushermotor WANTS a turbocharger...😉

AWESOME!.... AWESOME STORGE GARAGES NOW GOOD JOB ANDREW!!!!

Dear Mr. Camarata. 👍👌👏 You are absolutely right! This crusher needs a more powerful engine or to be geared down for having more torque. Also for the driving unit (it's a joke). This machine might work well on site. For instance if a farmer has a lot of stones/rocks in/on his fields/pastures. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health in particular.

Awesome guys ❤ Good luck with your work