B&G! Great people to work with man! I was a sub.

Very nice setup

excellent video 👏

Really like how the grab bar is setup on your boat. Did you build it yourself, or was it purchased from somewhere? Looking to install one on my 1436 as well and mount my depth finder to it

@WeekendPirate

2 ай бұрын

The grab bar was bought at a pool supply store. Standard aluminum 24” railing. Through bolted right to the middle seat. So far holding well

got her running good ….ive got a loaded 14/42 southfork 100 gauge all welded with a new zuki 20 hp …best performance i’ve got is 1 1/2 above bottom ,,5 1/2 inches setback on a bobs machine mini jack ….11 pitch solas at 27.6 mph at 6250 rpm’s @wot

@WeekendPirate

2 ай бұрын

Good performance! Nice setup

Have you thought about trying a perma trim cav plate. I have a similar boat and am thinking about trying that so I can run with the jackplate higher.

@WeekendPirate

Ай бұрын

I haven’t thought about doing one but they seem interesting. I think I’m pretty happy with how the little boat performs

Enjoying the build. Where are you finding the props on sale? I’m running a 14/36 with 15hp Suzuki and looking to pitch up as well.

@WeekendPirate

2 ай бұрын

Amazon, I just have been buying cheap props nothing crazy and they are doing just fine. The 11p was $70 and the 12p was on sale for $45

What hack plate are you running?

was watching and noticed my local ramp in okeechobee haha, got the same motor as well running stainless

@countryfriedent

2 ай бұрын

Any extra noise with a ss prop? What brand? Thanks

@WeekendPirate

2 ай бұрын

A fellow local 🙌🙌

@MidzGarage

2 ай бұрын

@@WeekendPirate been watching for a while 🤘🏼 once i finish up the next microskiff build we’ll get out on the water

I just bought a 15. What speed were you moving idling in gear? My Klamath 14 idles at 1.9, tops out at 22. Plenty fast enough, but I wish the speed off idle was lower.

@WeekendPirate

Ай бұрын

Honestly I don’t know what speed I’m getting at is I’ll have to check next time I’m out

Could you make a video doing a run down on everything you’ve done to it and the total cost

@WeekendPirate

Ай бұрын

Yeah I think I can make a short of that. I’ll make this weekend 🤙

@TravisMoore-vo8zq

Ай бұрын

@@WeekendPirate much appreciated 🤙

I just bought a new 1648 grizzly tracker from bass pro and ordered a 30hp suzuki with electric start and power tilt/ trim white of course! And the best ive gotten so far is 27mph. Do u recommend i change my prop?

@WeekendPirate

2 ай бұрын

Up to you. If you like the way the boat runs then keep it. If you want to get a tachometer and fine tune with different props then go for it. I’m sure you can push out 30+ but 27 is plenty fast

@gunsandrotors8704

Ай бұрын

Put a tach on it first before switching props.

I have the same boat. Tohotsu 20hp with 12 pitch goes 25mph. How are you getting 30? Is my motor to low?

@WeekendPirate

Ай бұрын

Not sure, maybe it’s the jack plate. Test it with the motor on different trim levels

I'm going to try to copy your set up exactly

@WeekendPirate

2 ай бұрын

Go for it!

From the sound…….you are making enough rpm. That’s about as fast as you want to go in that boat. Trust me on that……The wind would get ya……..Over 35 and uiucatch a breeze your flipping. I would say you have it dialed in perfect.

@WeekendPirate

26 күн бұрын

Yeah, I felt it. Gets sketchy over 30 so I’m keeping it as is lol