Two weeks later..... smoking blue.

@RadDadisRad

Жыл бұрын

$200 dollars later…

@bleach_drink_me

Жыл бұрын

Maybe, maybe not. I have 2 maxpeedingrods turbos that are around a year old. No smoke. Also have a godspeed turbo that's been running almost 2 years. If it matters I have -10an drain with as smooth as possible return lines on all 3. Also they come with oil restriction built into the maxpeedingrods oil inlet side, the godspeed didn't and I didn't install one.

@ProdigyAutomotive

Жыл бұрын

I've got 2 $190 Amazon turbos they've been fine they're 2-3 years old

@joeblow8893

Жыл бұрын

2 weeks later, headgasket failure.

@ProdigyAutomotive

Жыл бұрын

@@joeblow8893 has nothing to do with the turbo

Mans using a oil pressure gauge as a boost gauge

@konnerkramer329

Жыл бұрын

If it's stupid but it works it isn't stupid

@douglasfenbert1020

Жыл бұрын

Big difference between measuring fluid pressure versus air pressure. No true engineering going on here. Just another backyard hack having fun.

@boost1728

Жыл бұрын

@@douglasfenbert1020 there’s literally no difference though. Pressure is pressure.

@rhull3939

Жыл бұрын

@@douglasfenbert1020 the only difference between the 2 gauges is one has boost written on it and one has oil. PSI is PSI.

@ihateeverything3972

Жыл бұрын

@@konnerkramer329 Ofcourse. Nothing wrong with it, it just says oil but shit if you can't figure it out you shouldn't drivr

Honestly max speeding rods is a solid company

@braith.e36

9 ай бұрын

It’s max peeding rods btw dw I made the same mistake lol

I have beat on a godspeed turbo for almost 2 years still running fine. I have a couple maxpeedingrods turbos that are still doing fine a year later. Cheap China turbos have improved a lot over the years. Not saying they can handle it like the expensive turbos but they are cheap enough to mess around with and have fun.

@josueguillen5053

Жыл бұрын

You heard anything about running them on a 6.6??? I’m thinking bout swapping mine

@bleach_drink_me

Жыл бұрын

@@josueguillen5053 sorry but no experience with a 6.6,i don't own one and don't know anyone who does.

@Tyshkevich

Жыл бұрын

Considering the price you can get 5 1/2 of them... if they last 2 years each, that's 11 years. Probably will get the same if not more bang for your buck.

@bleach_drink_me

Жыл бұрын

@@Tyshkevich how much is your time worth to swap them out? To be clear I am not against cheap turbos obviously. Just don't want to be swapping them out all the time.

@beaterswithheaters1195

Жыл бұрын

@@bleach_drink_me I mean it’s a 20min job on a 6.0 once you’ve done one before. I think it would still be worth it in that case

I have a maxspeeding rod turbo pushing 13psi had it for year so far no issues.

That's $5 per psi what a deal!

@jonah4295

Жыл бұрын

Killer deal! Know where I can get one?

@boost1728

Жыл бұрын

@@jonah4295 yeah, google…

@carado1984

Жыл бұрын

Thank God for calculators

@feellucky271

Жыл бұрын

and read off an oil pressure gauge no less.

@feellucky271

Жыл бұрын

​@@carado1984 if you needed a calculator to figure that then you must be a gen Z

Them rods gonna be speeding out the cylinder walls at max speed real soon.

@diesel_livin8465

Жыл бұрын

6.0 bottom ends hood up fine

@DrRyan82994

Жыл бұрын

good deal if you plan on getting rid of it I guess

@KDlGG

Жыл бұрын

They can handle 650, which this is far from making 😂 the turbos gonna fail before that

I've installed maybe 100 maxpeedingrods turbos without a single issue. Best company ever. The billet upgrade is the only way to go!!!

Took me a minute to realize your oil pressure gauge was actually boost 😅 I was like “That’s not good, Carl”.

Bet it lasts longer than that 6.0s head gasket 😂

That flutter tho

@benjaminseward9553

Жыл бұрын

Best way to blow up the new turbo, I was hoping it would get a fair test haha

@joeysprojects9081

8 ай бұрын

@@benjaminseward9553doesnt damage the turbo at all. Complete myth

Quick update! I made it to the end of the driveway and now we know how long the new turbo lasts!

@drunkenpirate3201

Жыл бұрын

😂😂😂😂😂😂

The turbos are very reliable as long as you actually set up the oil system correctly.

Man 6.0’s sound sooooo good, coming from a Cummins 12v guy, sometimes I envy that, then I remember reliability.

Yeah those work I've used a few on my civic builds and they make reliable power

my 168$ maxspeedingrods turbo on my h22 honda has lasted 5 month and 2200 miles so far itll do a little white smoke when you first rev it on cold start but after that its minty

Man max peeding rods have popped up in my life multiple times

@dakota5041

Жыл бұрын

I bought a set of coilovers from them a few years back, honestly some pretty nice stuff for cheap budget fun

@boost1728

Жыл бұрын

That’s what she said

*Head gasket has left the chat*

@skylined5534

Жыл бұрын

​@PapaThreeper True, I can however see rods _leaving chat_ when the engine ends up ingesting bits of the turbo.

@DSMerkonmyface

Жыл бұрын

💀🤣💀

@neooverby3750

Жыл бұрын

@@skylined5534 not likely. the intercooler will hold all the turbo parts from going into the intake I’ve seen many catastrophic turbine failures and none have ever gone through the engine.

@FZERO20

Жыл бұрын

That wouldn’t blow a head gasket. Especially on a diesel

@warrenself

8 ай бұрын

@@FZERO206.0 Powerstroke aka VT365 was never meant to hold 40 lbs of boost. These engines blow head gaskets with stock Ford tuning.

My buddy has had a MST for I can't even remember how long now and his car is just as fast and reliable as it was with a precision turbo that was expensive AF in comparison....... does just as well.

I used this turbo on my silverado 5.3 with the wastegate shut its a fun turbo doesnt make the most power i think it maxed out like 800hp+ but fun stuff and have been using it for about 2-3 years no no issues

Those brand turbos, especially the gt35 variants have been thoroughly tested at high boost levels for long lifespans and some guys have done back to back dyno runs and the perform very close with name brand options/ originals that the mxr brand is copying

Turbo doesn’t really matter if it’s big, just never ever cheap out on your wastegate. I have a $400 eBay turbo on my s2000 but I have the top of the tippy top of the line waste gate and it holds boost so very well. I’m making 722 to the wheels on an 82mm eBay turbo

@bzamza

Жыл бұрын

Damn. That s2k must scream. Wow

@TheBigChad

Жыл бұрын

@@bzamza it’s a garage decoration. It’s just not practical to drive. Even going to like cars and coffee, you’re so tempted to do some hoodrat stuff when the lambos and GTRs are all out playing but I can’t get any traction. I’m on 275 rears and it’s just not wide enough

@justvincentf

Жыл бұрын

Homie spent $0 on a wastegate. Compressor surge is constant sound like from the video

@TheBigChad

Жыл бұрын

@@justvincentf that’s turbo flutter. And it’s not from lack of wastegate. You literally HAVE to have a wastegate. You get flutter from the blowoff valve. Either the spring is too stiff or he doesn’t have a blowoff valve at all. Which is harmless. Unless you are making so much boost that it’s sending air back through the turbo it tries to spin the compressor wheel backwards. That’s the only time turbo surge, turbo flutter, compressor surge, whatever you wanna call it, it’s the only time it’s bad. But in this guys case it’s absolutely harmless. I actually prefer the sound of flutter over a blowoff valve

@justvincentf

Жыл бұрын

@@TheBigChad the entire reason that compressor surge happens is because the pressure differential can cause flow in the wrong direction if not mitigated, which can cause stresses in the axial thrust direction of the impellers, which aren't really (even though they can handle it) meant to loaded like that, even with thrust bearings. People run turbos without properly sized wastegates all the time just for this particular sound because "JDM lol"

The 6.Oh sounds so good!

I've used Chinese turbos for 10 plus years I have a dozen higher dollar ones. I currently have a 7875 over a s488 compound setup in my cummins that makes 110psi. It's been on the truck like that for 2 years but I've used and owned each turbo for about 5 years. These turbo do not fail because of their build quality but because of user error.

@jim9983

Жыл бұрын

Ain’t no way your pushing 110 psi on a Cummins. That would net around 2,000 lb ft of torque.

@markrich3271

Жыл бұрын

@jim9983 the guy who runs the Channel keeps taking my link down . I tried to show you. Look for a thread with my name on cummins forum decided to switch it up that's my current build . Under my name is a thread from 4 years ago labeled he351cw over gt45 that will have screen shot of me making 70 psi at 2300 rpm that's half way through my rpm band it also shows 5 boots exploding into peices. x psi doesn't equal x hp ever . The turbo compressor map will show hp that can be made .

I love the surge from a high power diesel, sounds like a damn transformer.

Fords need all the help they can get especially the power chokes

when he says we'll see how long it lasts he's talking about the engine

That $200 turbo will hold together a lot longer than that 6.0!!

Sounds beautiful made 40 pounds of boost.. if it lasts I don’t see why you would buy anything else

@damiancardillo2135

Жыл бұрын

Ur name goes hard bro PogU

@Damo1998

Жыл бұрын

Noot Noot

@garrison1915

Жыл бұрын

I'm sure It'll last all of 2.5 ft under load

@Chocolate_dragon

Жыл бұрын

There is a reason everyone isn’t running these. When you blow a turbo and trash your engine that money you saved is gone and then some

@austingrills728

Жыл бұрын

@@Chocolate_dragon dude 40lbs of boost is insane. That’s enough to blow up a house 🤣. It only takes like 15psi to blow up a room on a house. This turbo is stronger than ur house 😂😂

Brooo right when I was just think about it this video came out, that’s really good to know

The transmission is going to blow before the turbo good luck buddy

My man trying to bring the Charlie Chaplin stache back.

@GODSWORD11

Жыл бұрын

Your man? 🤔

I like the way 6.0s sound even though everyone hates them lol

Sounds amazing!!

Nice to see you on yt

There’s a good write up and video online testing these turbos and basically they are pretty good just don’t push them too hard over stock limits. There coilovers are alright for the price but get the adjustable dampening ones and use them like stock ones. But yeah turbos are solid plus there’s not much to a turbo so they can be made pretty cheaply and efficiently. I wouldn’t push past 17-22psi (depending which one) personally but for a replacement stock with a bit extra boost they are worth the price.

Should prolly get a larger blow-off/diverter to prevent the turbo flutter or the bearings and seals will fail real soon.

Blow off sounds awesome on that rig.

@trevonrose3909

Жыл бұрын

That’s not a blow off. That sound happens when you don’t have one. It’s compressor surge

So the thing is, they work. The issue is, they usually don’t handle thrust loads well and self destruct. Higher the boost, more thrust load

They actually make decent products for the price lol.

Wow. It's hard to find a 6.0 still running. How old is this video? Was this recorded in 2010?

Love how as he clicked, his hand got so dirty😂 love motor work

hearing STUTUTUTUTU from a truck is a new one for me

Usually they just don't last as long, they're more prone to failure If they're over-oiled which will push past the seals, and the wheel and compressor designs are just "outdated" but typically they work just fine. I had one 150 dollar turbo a traded for a video game and it lasted through 4 cars and 5 engines.

'maxpeedingrods' as a name pertains to how much faster you can make your rods exit the block.

Maybe the el Camino should have a couple of these 😂

*One day passes* "Holding up pretty well" 🥴🥴🥴 Edit: never gotten this many likes before ❤️ thanks for all the love!

Boosted Boyz hatchback Honda has been on oneademthrr maxspeedingrods turbos for every bit of 3 years. Driving from Colorado to Florida, running 9s, and driving back home. It should take whatever you throw at it as long as you don't kill it on purpose.

Imagine only needing to pay 1,100 for a turbo. Trucks are reallllllly starting to grow on me! 😂

@stevenjohnson1692

Жыл бұрын

Lmao have you seen the cost of the engines and transmissions?

It even has the STUTUTUTU like bro that's cool

40 PSI on a diesel, now I know I've been out of business for a long time AKA retired, but 40 PSI you're going to blow that damn thing apart

@Tyler-ts2ld

Жыл бұрын

40psi is pretty standard in the diesel world. Most of your diesels in the light to medium duty class push 30psi+ from the factory.

@1oldteck

Жыл бұрын

@@Tyler-ts2ld thanks for the info.. I was never a Diesel guy

@Tyler-ts2ld

Жыл бұрын

@@1oldteck always glad to help.

Maxpeedingrods turbos might be cheap Chinese turbos, but they are the top shelf of cheap Chinese turbos, and damn if they aren't good!! Been running one for over a year on a daily driver that's pushing 20+ PSI, not a single issue!

Good job Goober!

It sounds awesome

Let’s just say that when the turbo goes out, so will the truck...

Maxspeedingrods going legit in my books

Since the high dollar oem is made in the same plant in China it will probably last just as long.

The BOVs bless you truck

I've seen a lot of those come in that have failed. Being in the turbocharger industry, we know failure causes by inspection. Those usually fail due to premature thrust wear and miscut parts. We usually end up selling one of our stock upgrades or a S frame replacement. Something to think about when you're price shopping for performance parts...

I cant imagine it will last all that long with compressor surge like that. But it makes choo choo noises.

2 hours later: This is how long a 200 dollar turbo lasts..

@Christian-gl3jc

Жыл бұрын

Lol

@Christian-gl3jc

Жыл бұрын

Lol

@spartansoff-roadrecovery5058

Жыл бұрын

I have had decent luck with turbos like that

"2 hours later" Big slug goes boom

My oil seals were not even installed lol smh

@FZERO20

Жыл бұрын

That’s crazy wtf they was tripping

My 180sx got a China turbo on it still running strong😂 I take it to the track once and a while and noticed it has a bit of shaft play now

Nice half... half stach guy

It depends on the engine you're installing the turbocharger it needs to be able to handle the turbo pressure and have forged pistons and rods and on and on.

im not worried abt the life of the turbo, im worried abt that 6.0!😂

Sounds great

Damn that diesel is revving

If you look at the description it was posted sept25 2022 and doesn't seem like there's an update needed yet. So no news is good news.

@ccright8285

Жыл бұрын

Nvm he added 2 more ontop of this.

Bruh I ran a $140 ebay turbo for 25k miles without a filter (pod filter wouldn't fit) and sold the car like that

*Power has left the chat

When he said all that could go I was hoping the 6.0 was gonna to not just the turbo

that plastic cowl that runs above the turbo, everyone always put the push pins back in it or zip tie it up. seen a 6.0 or two catch fire from it resting on the turbo.

i had some coilovers from that company on my e46, the guy who bought it from me still hasn't had issues with them. funny cause a lot of people had negative things to say about them lol

Can't wait to see

When your shirt costs as much as your turbo 🤣

I've had the Gt28 on my car running around 370hp for many years and I kick it's head in constantly and with no issues at all. I hope to buy the gt30 or 35 next to up my power again and yes I will kick it's head in every time I use it again 😂 I can't wait

I'm running a cheap turbo on my compound turbo TD5 running 35+psi, the only problem I have encountered is that there is small amounts of oil coming from the seal on the exhaust side, that is my fault though, because the angle I have put the oil return but I am fixing that

All 30 hp of your 6.0 kicks in, WHOA MAMA!

I approve of your mustache

That’s awesome I want one

40lbs gna blow that Ford engine up

Mr. Newhouse is proud

This was a good video. I’m also interested in how long it’ll last. I guess just keep up on your oil changes

@feellucky271

Жыл бұрын

he's trying to read boost off of an oil pressure gauge so there's that..

Sounds good

Af you put a bov valve on it, you could extend that life spans from 1 week to 2 weeks

6.0 beauty 😍

Never seen so many grown men arguing over a subject taught in 3rd grade all because of his gauge saying “oil pressure”

should have had a follow-up video coming right behind it.

really hope that impeller doesn't get sucked into the engine when it blows... the 200 $ just turned to 10k

Nice compressor surge.

Love the shirt

Goodbye motor when that Turbo let's loose

Was that chrisfix handing you the turbo? 🤣

I love $200 turbos they are what keeps me in business. Folks you get what you pay for! Don’t go cheap on a turbo. There is a lot that goes into more modern turbos, especially VGT turbos…

I have a 2001 tacoma with this turbo 😂 Daily drive it 120 miles a day no problem

So what happens is your Charlie Chaplin stache gets thicker? 😂 good video 🤙🏽

Now to replace everything in the motor because we ran way too much boost through a motor

So put that on your truck.when you want stututu noises without dealing with pay 1100$ for a new one. For those who dont know, that noise makes your turbo hate life