I don't know which is sadder, Eric releasing a video on a Saturday night, or me sitting here waiting for it.

@srobertweiser

2 жыл бұрын

I've thought about this, and I figured that we're probably sadder. At least Eric's making some money.

@fitfogey

2 жыл бұрын

Yeah we’ve covered this kinda. Like we said getting old is funny. Used to party every Saturday night now I watch Eric’s teardown videos. Actually happier doing this instead of the bar scene that got old quick.

@Yankee7000

2 жыл бұрын

Nothing sad about it sir. A hobby is something in which to delight!

@bretthoomana2541

2 жыл бұрын

@@fitfogey I'm forced to agree. Apparently something is wrong with my face, or I'm just a douche or something. I'm too old to recover from drinking AND getting my ass kicked.

@factorism100

Жыл бұрын

Neither

That's quite a nasty "misfire" in that Tahoe! 😁

@pantygnome

2 жыл бұрын

Sounds about as stock as Cleetus's Murauder.

@randystegemann9990

2 жыл бұрын

Looks great, sounds terrible. I was half expecting it to blow up.

@DanielDoub1eDDunn

2 жыл бұрын

"Completely stock" .. yea right ;)

@willfixthingsfordonuts

2 жыл бұрын

"Misfire" AKA Dumpster fire cam

@jimbusmaximus4624

2 жыл бұрын

I thought that misfire sounded an awful lot like a cam!

Funny how your misfire probably adds 50-100hp and another 1000 rpm to the redline... I'm more a fan of exhaust blockages that make whirling noises, but both are better than no misfire.

(Engine makes a weird clinky sound turning over) Us all giddy: “POSSIBLE MAX CARNAGE INCOMING!”

I think I would be kind of interesting to see a filter cut open and inspected on a engine that had a catastrophic failure.

6:05 Partially-blocked coolant passages are probably due to someone having run Bar's Leak or some other radiator stop leak product.

Although I’m definitely on Team OEM parts, one reason why a shop may choose to use aftermarket parts in some cases is parts availability. Even a lot of podunk towns have a NAPA, Carquest, O’Reilley’s, etc , but they may not have a car dealer in town. So, getting OEM parts may be more difficult.

@pgbpro20

Жыл бұрын

"Buy Delco" I asked my parts counter guy (work at a dealership) what he would do if he didn't have access to our employee discounts. FWIW, he said he would "just go buy Delco."

Everything I know about engines I've learned from this channel. Started out barely knowing how an engine actually works and now I still don't, but I know how to (theoretically) find the problem with an engine. Thanks for uploading. Love all of these videos.

A+ on dipstick removal you have now reached Zen mastery level

Strange one this time. The one that looked significantly cleaner inside was destroyed. The filthy one looked like a usable shortblock. Would be interesting to see the ring gap comparison on those two.. give you an idea on the miles. Oil pump gear comparison was awesome 👏

@tobiaskarlsson9094

2 жыл бұрын

The filthy one seems to be a usable engine except that some asshat tried to hodge bodge a headgasket on it. Hade the headgasket been properly changed that engine wouldn't be there.

@aesthetic3616

2 жыл бұрын

@@tobiaskarlsson9094 asshat here and I know how to change a head proper. Devalue my name why don'tya

Please do a 5.7 Hemi I’d love to see one and I’m sure many others would since it’s basically one of the top 3 most popular v8s (Ls, coyote 5.0 & 5.7 Hemi) I’d really like to hear your take on the lifter issues found on I believe 2010 and newer

@cyrenecai

2 жыл бұрын

I second this. I found the prior 6.1L Hemi teardowns interesting because of how different they were in design to the LS engines, I'm wondering if there's any difference between the 5.7 and those older ones or if it's basically the same engine with a different bore/stroke.

@chrisspurdle1192

2 жыл бұрын

That's what I'm waiting for as well

@03mm24

2 жыл бұрын

@@cyrenecai basically the same I own both, only difference is the mds found in the 5.7, the 6.1 and 6.2 hellcat didn't have it. The "hemi tick" however is found in the 5.7 6.1 and 6.4 but not the 6.2 hellcat

Love coming home to this. Keep up the good work! I own a 2015 Silverado, love seeing these apart.

There is just something to the sound of cam cap bolts breaking free on an LS that does it for me.

I keep thinking you’ll make a giant welded statue out of all those “save for later” timing chains one day 👀

Lol with miss fire 😂 sounds nasty. I work on those Tahoe's for the sheriff's department here where I live. Nice to hear one with a cam!

From a guy that worked on GM motors in the 60s, these engines are light-years ahead of the crap we had to work on. You wouldn't believe it.

I find driving a screw driver through an over torqued oil filter to be the most reliable removal tool.

@winstonsmith313

2 жыл бұрын

I used to do this on old Detroit iron but nowadays they cram so much stuff in the engine bay that you can’t get a clear shot at anything. Back in the day if a screwdriver pounded through the filter started to tear out, I’d just ram another one through at 90 degrees to give me two “handles”.

More double teardowns please. One engine teardown is awesome but two is even better.

@edwardschmitt5710

2 жыл бұрын

two. unless you mean "also"

I've been enjoying your teardown videos SO much. You've got a beautiful formula here. You're extremely knowledgeable about IC engines and it comes through in every video. But you're still excellent at breaking things down for the layman. You've got a great sense of humor, you're humble and self-effacing. No whizbang graphics or annoying music. It's wonderful. If I could make one small request: The next time you have an engine with "spun" bearing can you explain exactly what the means, what happens to the bearing and/or crank/cam? What is the usual cause of a spun bearing? Thanks so much for making these informative and entertaining videos!

@ponycar9116

Жыл бұрын

I’m sure Eric would say this better, but notice how crank, cam, and rod bearings are stationary and something spins inside of them (crankshafts, camshafts). The bearings are slightly crushed into their spaces in an interference fit, but the spinning items inside them have a very small clearance and that space is where the oil lubricates the bearing/item. Think bearing backside dry, front side wet (with oil). If something bad happens (bearing isn’t crushed enough when built, tolerances are too tight with rotating item when built or running, or oil starvation occurs), the bearing can “catch” more on the spinning object than how it’s locked in and the bearing itself will spin. You see the results of that here.

Awesome set of teardowns Eric! I was in St. Louis last Sunday, would've loved to stop by your store but you're not open (don't blame you one bit either, you need some time for yourself!) I know they're boring as hell but would really like to see a teardown on a Ford Duratec 20 2.0L 4 cylinder non turbo sometime. I have two vehicles with that engine and am curious as to how they look inside. Anyway, keep the teardowns coming, you rock!

@slow_r3188

2 жыл бұрын

That would be a cool tear down

@cablrus1885

2 жыл бұрын

What is name of the business not seeing it on here anywere or am i just missing it

@garfield89dude32

2 жыл бұрын

@@cablrus1885 Importpart is the name of his business St. Louis Missouri

@garfield89dude32

2 жыл бұрын

Importapart, sorry, missed the A

@cablrus1885

2 жыл бұрын

@@garfield89dude32 thank you. Looking into an s10 build this spring with ls transplant

The first one looked like it was overheated a few times before it met its end of life, it looked Cooked Well Done!! Good Show Man!!

Automatic thumbs up for the "ding, fries are done" reference.

Great stuff, Eric. Good to livestream with my fellow motoheads :-)

Great tear downs, it’s always interesting to see the many different types of failures that can take place inside an engine, and how most people seem to view oil as optional. I don’t know how often you see them, but it would be great to see either a 2.7 or 3.0 Ford Nano V6 apart. I know you did a 3.5 RWD Ecoboost once, but the Nano’s I’m sure are a completely different creature from the Duratec predecessors.

@edwardschmitt5710

2 жыл бұрын

Not always the owners fault. I found out my "Ecoboost" engine has a GM design flaw that causes it to burn oil the hard way.

What a treat, 2 tear downs, Waited all day for this video, Thanks

Thanks for the two-fer Eric. How about adding some slow-mo of the large scrap items as they crash into the scrap bins? Great channel!!

9:41 "These are really expensive!" Tosses the part in the trash! Lol

Interesting to compare! I'd be interested in a teardown of a "recent" (read: mid-90s or later) Volvo engine. The old cast-iron red blocks are unremarkable except for their extreme durability, but the more recent stuff has some design decisions in it that I'd love to hear your take on.

@christophercasale7961

2 жыл бұрын

You mean the Volvo Whiteblock engine? There are several iterations and it evolves a fair bit from it's P80 origin to the P2

@SilasHumphreys

2 жыл бұрын

@@christophercasale7961 Whiteblock and the SI6, yeah.

@volvodoc01

6 ай бұрын

The K (1989 only!) redblock has entered the chat (the only engine, Volvo or otherwise , that I have catastrophically blown up…. To its credit, it ran minus no.1 rod (sheared at wrist pin and then at crank), and no oil pump for plenty enough time to get up my rather steep driveway.

@volvodoc01

6 ай бұрын

I was a Volvo master certified technician for the early 2000’s. The white block is an absolute unit. This was originally made as a diesel, then converted to a gas engine. Extremely reliable engine as long as you did timing belt every 100k miles

Each time you tear down one of these engine, I am thankful that I change my full synthetic after 5K without fail.

Dude! I found this channel just before Christmas!! Love it so much!!

I see that S54 in the back in the intro! Excited to see you tear that down!

I see you remove the cylinder head bolts in a pattern also....NICELY done, especially with aluminum heads.

Thanks for the great videos Eric! Keep it up🍺👍

On the second teardown I thaught I was watching you pan for silver until you zoomed in "Nope just metal"🤪🤪😂😂

I got one of those pullers a year ago after seeing it in your older teardown videos. Definitely a really good puller

Your engine dismantle videos are soooo satisfying. ...

A teardown double feature. AWESOME with a capital A! This LS fanboy is satisfied with these teardowns. That Tahoe PPV sounds like a train chugging down a track.

Thank you Eric for the duo year downs. Enjoyed the video very much. 😀❤🇨🇦

Look forward to this every week thanks

i enjoy your tear down vids man, they relax me lol. its like mechanical asmr :D

“This is very expensive” And jus throws it in the bucket from like ten feet away😂😂😂

"Right in the oil bucket." Lol, every time!

I hereby nominate "single-cheek it" as the expression of the year, it's that good.

That was entertaining. I appreciate your humor, sarcasm, as well as the instructional aspect of the teardowns....fun to watch. Hey, really like the sound of your "cam'd up" Tahoe! blahaha....lmao.

Second engine got replaced when volume knob would not go up anymore. :)

For what it's worth, when I did a head/cam swap on my LS1 the GM head bolts had thread sealer from the factory. And they are torqued super tight.

I have that crank pulley tool and I love it. I did the same thing with that push rod comparison when I first got me kit😂

The buildup in the coolant passages is from when dexcool gets really old and sits and then goes through a ton of heat cycles, my lumina with a 3800 s2 had that problem when I did head gaskets on it

Had a 2008 Impala SS with the LS4 in it.. Never a drop on the ground but definitely had to keep adding oil between changes. Took it to the stealership while under warranty for a consumption test and was deemed to be normal. Could very well have ended up like the one in this video with just a little bit of neglect! Great Video!!

"That looks pretty good" *Chucks it across the shop into the scrap bin* Lol.

"Single cheek it..." gold, totally gold.

Great job on the monte she looks great. Nice to have friends that help and love to fix cars.

Eric, great video buddy. A pair of Knick knacks. Too bad. Spun bearing makes a real mess. First one wasn’t bad at all. Like you said, a lot of good parts. Really enjoyed seeing a pair get torn down. Be well. Big Al.

I really like the single cam push rod valve engines. Decades old time tested, simple, less complicated, and they work. These two engines are more " complicated " than the last ones I saw from GM. Oil pans with all the different " compartments " in them, and the cam cover top and not opening up to hydraulic lifters, cam and push rods " in the valley " .

I'm curious in about 10 years when some auto manufactures today are switching to thinner and thinner oil what will turn up in your shop.

Picked up a pair 243’s from you last week, didn’t even realize it was you or your place. Only seen a video or two before then

Love the channel and videos bro!

Thank you for the informative videos.

Very informative teardowns as usual. I'd like to see a Ford SOHC 4.0L V-6 teardown someday. Between the Rangers, Explorers and Mustangs, there has to be lots of them out there. I have 2 Explorers ('01, '02, both 2-door) that have so far avoided major repairs and would love to see more about how these engines are put together and operate, especially the timing chain design.

The first engine looked like it had head gasket stopleak in it or something along those lines. Never actually seen it work but it does clog up the heater core, and usually, you end up having to blow water through them to unclog them (or replace them if it gets too bad).

im 9/10 certain those overtorqued headbolts were felpro replacement. I made the mistake of buying those before and the schmoo they put on there fucks up everything and makes them feel overtorqued because that stuff jams up the threads and twists the bolts. I switched to OEM and learned from my mistake.

Great job! I like that Tahoe... Nice!

I own a 2004 2nd gen Durango that has a 4.7 in it. If you ever get one in shop and do a teardown I'd love to see it. Much love and keep up the content I love it.

Dang! The Taho sounds like its missin' 5 of 8 of them cylinders!

“Single Cheek It” 🤣🤣🤣

So on the timing chain guides, whats up with them breaking? Lack of oil? Is there something better out there that won't fail after a 100k? I'd hate something that simple breaking and showing up somewhere else

I am wondering if the market on used cams might not be starting to go up. I follow another you tube engine person who helps build racing engines, mostly Dodge / Plymouth. He reported that they ahve been getting a rash of bad cams and valve tappets that fail;, sometimes catastrophically, as soon as during the break in period. He indicated that a ton of chinese parts are the culprit in his experience in the last year. Thanks for the teardown. Interesting video please keep them coming.

I am enjoying your videos, thank you. Do you have a friend with a (sheet metal) brake? Try grabbing a piece of stainless, and bending it in kinda a house shape, to tie together you drain pans and direct the fluids into the pans?

I would love to find one of those Buicks. I didn't even know it came in a "Super" until I bought my CX. Wicked man lol

'Ding' "Fries are done" 😆

24:20 Never let anyone tell you you need a new fluid catcher pan... that's a perfect fit. Prop both of those up on the engine stand and between those pans and your towels you can do whatever you want to a "drained" core

Your my car guy twin. Daily built LS….love yotas 4Runners land cruisers Buick olds Pontiac. Keep up the good work man

Just found this channel. Great video

5.3 engines are great 👍 runners. Mines is in my GXP Pontiac Grand Prix, It runs very good, its fast, runs quietly doesn’t rattle. Has 101 thousand miles. I take good care of the oil nothing but the best and change oil and filter every 3,000 miles, I change transmission fluid every 15,000 thousand miles. Just a Great Super car looks Very cool too!

Ha! I need to watch with subs on (night time insomnia so I don't wake the Mrs) Made me chuckle when you use the air driver it says "Hey!"

Love these videos... I need More! 👍🏼

That misfire sounds right in tune sounds good always enjoy the videos

PEW PEW PEW PEW I love the soundtrack to your videos! Cheers!

LS heads also have letter markings. I understood it that vettes got the "best" heads and they were marked "A". GTOs, Camaros, etc got B, and C. However, on the second engine I noticed "F" and "B" markings on each head respectively. Does that denote front and back? Does anyone know?

Excellent video! Love it!

I lol forward to every one of these!

hey man, i hear you say “why do people buy these” to aftermarket gaskets, i work at a shop and the reason my shop uses aftermarket gaskets (although i don’t agree with the use) is because we get our part supplies from napa or car quest before even checking dealer inventory

Good vids 👌 I'm waiting for a 4.6l 2v teardown!

I reckon that Tahoe PPV motor will be making an appearance sooner or later. She sounds ill to put it mildly.

Timing tensioner relocation, bearing deletes, and Tahoes with misfires. Did I remember to subscribe?

Those 5.3 engines are always interesting to see pulled apart, there's so much variation in maintainence and condition! I'm wondering if you ever have any Jaguar engines coming through? I'm guessing there isn't much of a market as they're sort of financially totalled.

@Slane583

2 жыл бұрын

Honestly, since the second one came from a car I wouldn't be surprised if its' internal damage was caused by a driver who was hot on the pedal all the time. And when it started making clacking noises they just raced it until it failed.

good video, educational and entertaining !!

I would love to see a teardown on a GM Atlas In-line 6 cylinder. I’ve heard they are incredibly simple and very tough except the one model with GM valve issues.

Really enjoy your videos, I used to wrench on NASCAR engines back in the 80's and could have used you on the team. But I suspect you weren't even born! Would love to see some race engines, sb chevy, Ford 351's, hemi's, even foreign racers. But sure they are far to few and far between. Keep on keeping on, and that misfire on the cop truck was interesting...

Cool video and I learned a thing or two.

Always look forward to finding out the difference between FWD and RWD parts!

It's funny I remember in the early 2000s any LS block was insanely priced. Now they're worth a dime a dozen. But it is still my favorite engine to build and make power on

I am learning a lot watching you disassemble engines. Two questions 1 How did you learn to do all this? 2. Where do these engines come from?

@brianmathew09

2 жыл бұрын

salvage yards are littered with them

I have a L33 5.3 V8 at 160k miles and would like to know what I have to do as maintenance goes for it to stay in good shape. You said the first engine lacked maintenance and I don't want the same to happen to mine. Thanks and great video

@Evanx373

2 жыл бұрын

Change your oil and don’t run super long oil change intervals. That will do a lot to keep the inside of the motor clean and make it last as long as possible.

Those 5.3 "front drive" engines/ transmissions would make awesome Pontiac Fiero upgrades :-)

@drtidrow

2 жыл бұрын

Absolutely, it's been done multiple times. IIRC, the engine/trans combo is only about 50-100lbs more than the original iron-block V6, but over double the hp in stock form, and can be fairly easily modded to ~400hp or so (ie, triple the V6's power) I'm thinking about putting one in my '88 Fiero Formula. :-)

@killerdoxen

2 жыл бұрын

I was thinking about S10 builds for those. Pull the trans forward to avoid having to clearance the firewall. Or get you more room at the radiator.

Thank you. A pair of LS engines and they were already half naked.

I used a fine grade aluminium oxide sandpaper to clean any traces of cylinder head gasket off the engine block & deck of my 5.7 litre Chevrolet LS1 V8 engine to avoid scratching the sealing surfaces in late 2018,3 years & 30,000 kilometres (about 18,000 miles) later it's still going good. Your Chevrolet Tahoe sounds like it has a bigger than stock camshaft in it because it sounds a bit wild !

Great teardown.

Gotta love the pew pew noises of the air impact 🤣

Hi Eric, I imagine that you have already answered this question in previous videos, but what parts you generally try to save and resell?