Thanks for the teardown. Couple months after using the charger (some older generation) the middle port stopped working. Today I managed to repair it, contacts were broken on the small riser board so I used small wire to reconnect them. It's a poor design that charging port sits on tiny riser board which is held by only 6 solder joints close to each other. The other USB-C board is much sturdier.

@Cyupcheack_nebunull

Жыл бұрын

Same with my , stopped working middle usb c port , continuously give impulse to charge and stop again charging and stop , and also usb A has some pins broken i think , when i pushed the charging cable sideways is working if i leave it free is not charging . So from 3 port only one is working properly now . I want to fix it but i’m not sure if i can managed to do that without destroying it completely ☹️ Anyway is made of poor quality this charger..

So glad I've found your channel! Keep up the great work

Excellent work! Truly professional.

Great channel, instant sub.. Hopefully you can include more product teardown like surge protector, brands include APC, Belkin etc. And include rating on the similar product and which one worth the buy. Looking forward for more content!.

You have no idea how much i love your videos..teardowns are the best😋

@ChargerLAB

2 жыл бұрын

Glad you like them!

Is it worth having a look inside the transformer to check if they have been competently made? After all who wants mains voltage appearing at the output.

so.. what's the difference with the very first gen with this one apart from bigger primary caps (110u vs 132u) and slightly more efficient mosfet?. switching frequency is more likely similar since reference board from GaNSystems ran up to 180kHz with NCP1342

Ugreen has the smallest 100w 4port charger I've seen, similar to the anker chargers you've featured in your other video. Would love to see a tear down of that!

Please note that this puts out a lot of heat when used at or near 65W. There is zero room for heat dissipation and only expels heat from the outer shell after the core gets overheated. Capacitors and solder joints don't do well with extreme heat. Portable is good but not at the cost of component failure.

@michaelstrode8924

Ай бұрын

Everything Baseus is heat. Used to be good but become fire hazards now...

This channel need more subs! I wonder if my Acome 65W GaN charger will have the same components, from the port location and size it looks very similar to this.

in the future everything will use battery & chargers. so a lot to come. whishing the best for your channel!

good sparation on pcb good out filtering ... imho its a good design too ... solid gan charger

Thanks for this one.

Which charger brand u recommend please mention a list in order of priority Actually I want to buy a future proof charger !! Presently i need it for iPhone 12. There are so many brands like Apple, Anker, Belkin, Baseus and Xiaomi etc but since I don’t know whats the difference in internal component quality so can’t decide between getting a cheaper one or expensive one.. so can u guide please

Could you cover the Minix chargers? I've ordered 2 of them and they work well. Though I recommended it to someone else who had their charger break in a week.

Thanks for the helpful content

I have two Baseus PD chargers and three of their powerbanks. All excellent and fast.

Compare to UGREEN Nexode 3-in-1 65W GaN Charger, the components and PCB board quality is it better or slightly lower?

Could I plug in this Baseus Gan3 charger to wall socket 24/7? I have samsung old chargers 25w and 45w, they are all working good and always plug in wall socket 24/7 up to now 4 years plus.

They make a 100 watt version of this model now too with 2 usb a and 2 usb c can you check if it really delivers 100 watt and if its safe

I love your video and explanation

@ChargerLAB

2 жыл бұрын

Thank you! 😃

Loved the video, but... is it a good charger?

If i compare the number with my GAN2 pro. They haven't changed anything for the USB-c ports. But the USB-A can deliver more power.

nice channel, love it

can you do USAMS charger ? is it the same as baseus?

Whats the best GaN charger atm? Baseus? Xiaomi?

Something worries me, I used a voltage test key on the end of the Baseus 25w Charger cable and the light came on. Does anyone know if this is normal or explain?

Had this for 11 months to power my Mac air and charge my iPhone and apple watch. Was good while it lasted as it was really portable until 1 USB c port shorted and caused the unit to heat up to 70C even without any cable attached.

@elhussin5687

2 жыл бұрын

What cable you used

@jclalzona

2 жыл бұрын

@@elhussin5687 i was using anker and apple cables with it before the overheating

Can you tear down the baseus 87w energy stack GaN?

Подскажите пожалуйста, в этом з/у 2 трансформатора, или один?

Does anyone know if the version of this with 2 AC outlets safely works with 240V, so long as you only plug in dual-voltage low power devices that can handle 240V into its AC outlets? Baseus says that you can't but I don't see why not, and suspect that it's just legal CYA to protect from being sued by people who tried to plug in 125V-only and/or high power devices into the AC outlets in 240V countries.

How does this compare to the Ugreen 65 watt?

What is this white material on pvb and other components? Like toothpaste, is it isolator?

25 V filtering capacitors for 20 V output voltage? Is that a sufficient margin?

Can you do a tear down of Ugreen 100w charger?

I have a second gen and that led indicator can be kinda annoying, not an issue if you're not sleeping next to it but could be a deal breaker if you care about this stuff. Putting tape on it is just stupid so nah

Anyone know where to find the gen 3?

The Aukey Omnia 90 watt charger is my go to when I travel.

from what i have seen with Baseus you get what you have paid for. Do not expect it to last long.

There is a new one Gan5 eu plug, can you check this?

amazing

I'm a little confused in the us baseus webpage they only have the 65w GaN2 Pro. I went thru Amazon US looking for this third gen GaN3 pro could only find the new one that is corded. Where did you purchase this model?

@ChargerLAB

2 жыл бұрын

This is a Chinese model, I'm sure it'll be available in the US soon

@Darktron

2 жыл бұрын

@@ChargerLAB Thanks for the info, I already ordered a the 65C3 from a Chinese seller to import it to US.

Verri good,,👍👍

Like this komponen👍

only can by from amazon?

Are these as good as Anker ?

Please review the new anker gan II 65W a2667 3ports

I bought one of these, but in the charger is printed AC 200-240v. May i have problems if i used on 127v socket?

@syarifairlangga4608

Жыл бұрын

Bruh.. thats dangerous

Will this support Samsung 45w for S23 ultra? With included cable ? What is the difference between gan3 Vs gan5?

@ChargerLAB

Жыл бұрын

It has one PPS PDO of 3.3-11V 5A, so it can support Samsung 45W with the included cable.

Always try to use OEM charger . But I need to know best third party chager . Please do you have any recommend chinese brand ?

@DarkZerol

9 ай бұрын

Mcdodo

So is this actually a good a charger?

On C2 port A33 charges faster when in use (around 10-12W. On C1 charging goes to basically 0. When not in active use C1 and C2 charges the same power (max 25W). C2 seems to work better with my device.

Is there any significant difference between previous Gan 2 Pro 65w?

@coltje

2 жыл бұрын

yeah wondering this aswell. i just received the gan 2 pro, i cant even find the 3 pro on ali

@coltje

2 жыл бұрын

I found 1 but only with US plug the USB-A port is faster on the 3 30w vs 60w Gan3 pro: 4.5V=5A, 5V=4.5A, 9V=3A, 12V=3A, 15=3A, 20V=3A Max. Gan2 pro: 4.5V=5A, 5V=4.5A, 9V=3A, 12V=2.5A, 20V=1.5A Max The color of the usb-c ports are orange on the 3 instead of black and its a little shorter 63.5mm vs 75mm and a bit lighter

@coltje

2 жыл бұрын

Correction i just read in the manual the 2pro does support up to 60w on the usb-a port, specs on ali are wrong i guess

@maaninou

2 жыл бұрын

@@coltje thank you ! 63.5mm vs 75mm is a good thing ! can you give us a link for gan 3 pro please

@Darktron

2 жыл бұрын

I had the same question where to find this model the problem is only china specific the model number is: CCGAN65C3 ,hope it helps.

Which charger is good for charging infinix x1 book laptop , the genuine charger is lost , it was 65 watt c to c type. Kindly reply. I am very worried regarding

@ChargerLAB

2 жыл бұрын

any 65W USB-C Power Adapter that supports PD protocol.

Please install application in your phone name 'battery charging information' and check the differences between your device and apk

❤️❤️ I have the 100W Baseus GaN charger... Waiting to see its teardown..! ❤️❤️

@elhussin5687

2 жыл бұрын

Did your charger indicator light blinks when plug in a powerbank via type c and the charger is not plug in via AC outlet?

@sobadaham

2 жыл бұрын

@@elhussin5687 Don't have a type-C input power bank with me sorry. Does it affect in a bad way?

@elhussin5687

2 жыл бұрын

@@sobadaham baseus dont include the info on the blinking light in the charger even in the manual it does not say anything

@elhussin5687

2 жыл бұрын

@@sobadaham how many volts can you get when you used both usb a?

@sobadaham

2 жыл бұрын

@@elhussin5687 I don't have an equipment to measure the exact amounts of Watts its outputting. But I have used it close to an year now without any problem in performance. One time I plugged in the M1 MacBook, Camera battery charger, Flashlight and the tablet all at once, but did not see any difference in charging times. 🙂

Hello, I have a question, when I use three ports the specifications says the out energy is (45w + 15w), what that's mean? It´s mean that deliver C1=45w + C2=15w + USB A=15w Or it's mean that the last 15w are sharing between C2 and UBS A And if the last is true, how much energy deliver C2 and USB A specifically in the moment when the three ports are connected?

@ChargerLAB

Жыл бұрын

The 65W means the max total output needs below 65W. So, it must be the last one.

@AzChannelAZIZULAFFIF

Жыл бұрын

The last sequence is true. 15w are sharing between c2 and usb. Probably 7.5w each port. The 1st sequence cant be, because 65w is the max. 45w+15w+15w = 75w. ❌

Please make a teardown of ugreen 100 watt

Is this worth it to buy?

Please Compare to 5th gan pro of Baseus 65W

The LED indicator is a nice touch but again cheap Chinese caps, Taiwanese and Japanese are only acceptable ones because these are only rated for 2000hours as per the datasheet.

@elhussin5687

2 жыл бұрын

2k lifetime only?

@tanishqbhaiji103

2 жыл бұрын

@@elhussin5687 yes

@elhussin5687

2 жыл бұрын

@@tanishqbhaiji103 where is your source?

@tanishqbhaiji103

2 жыл бұрын

@@elhussin5687 the datasheet

@elhussin5687

2 жыл бұрын

@@tanishqbhaiji103 where?

please make video on flash charger 2.0 33W of VIVO Y73

Здравствуйте! Можете ответить на вопрос...может этот зарядное устройство заряжать телефон Samsung s21 и какая максимальная мощность для этого телефона будет? Заранее спасибо!

@ChargerLAB

Жыл бұрын

Around 15W.

@user-bt9cr1db4i

Жыл бұрын

Понятно, спасибо за честный ответ

This can charge a laptop that came with a 120w default charger?

@ChargerLAB

Жыл бұрын

It depends on your laptop.

hello, where i can buy your tester at 2:30 ? ty

@ChargerLAB

6 ай бұрын

It's the ChargerLAB POWER-Z KT002, you can buy it here: amzn.to/3yjhUEv And also, here is the unboxing video: kzread.info/dash/bejne/l6eWq7xvfc-up7Q.html

Baseus 65w GaN 3 Pro Charger 4 ports please

There are way too many failure points inside this charger. Capacitors blow up all the time.

why gan is smaller?

@LeonardPutra

2 жыл бұрын

Because it is more efficient, means it only require a smaller heatsinks and lower thermal mass.

@AppleReviews

2 жыл бұрын

@@LeonardPutra using GaN has only sense when used above 15V - everything lower - better use older technology charger

@nikolina872

2 жыл бұрын

@@AppleReviews why?

@AppleReviews

2 жыл бұрын

@@nikolina872 please watch YT video comparison

@cryscrystiii7023

2 жыл бұрын

Because the frequency is higher the transformer is small

my charger: if it's real:

Where's kuulaa 65w charger

They really shouldn’t regulate the voltage twice, very poor efficiency.

@hafidsg

2 жыл бұрын

Can you recommend a good PD charger ?

@tanishqbhaiji103

2 жыл бұрын

@@hafidsg Which price range and wattage?

@hafidsg

2 жыл бұрын

@@tanishqbhaiji103 65w charger that have a very good efficiency and etc in your opinion?

@tanishqbhaiji103

2 жыл бұрын

@@hafidsg price point?

Mine completely died after 1month + of use. Baseus was insincere with their warrenty resolution. They offered a voucher for me to repurchase ($20 with $45 min. spend), where I paid 30 for the charger. Either that or I had to send the product back to China at my own cost which is obviously nonviable. At the end, I got Lazada to issue a refund superseding the seller.

@coutinhoxdloko

Жыл бұрын

Compre apple original e seja feliz

Again, GaN without a proper implementation just worse than plain silicon. Very cheap components from no name manufacturers. Very disappointed.

The teardowns only show what components are inside which is totally jargon. Doesn’t say if the components are of good quality or not so it’s totally useless for us consumers. Baseus makes the worst products. My charger failed right out of the box, with one port not being able to charge. A cable that I bought from them failed as well. A cable tidy that I bought from them broke within days.

The GAN 💀 Someone copy a rubik cube name

Staying away from this brand causing iPad 12.9 degradation in battery down to 90%

@SweetieJamii

2 жыл бұрын

Charging makes iPad hot. I have the Gan2 pro 65W from this brand. I would suggest Ugreen, Anker & Aukey for charger instead,

@krakadzil

Жыл бұрын

For how long it degraged?

You must compare it to « 3 ports » gan2 pro charger in term of size , not gan 2 lite