Teardown of Anker 120W GaN Charger (GaNPrime 737)
Ғылым және технология
You can buy it on Amazon: amzn.to/3vBtwSd
If you wanna buy the tester of POWER-Z, you can visit our Amazon store:
www.amazon.com/s?me=A31UM8SRX...
Introduction
---------------------------------------------------------------
Recently, Anker held a special event and announced its best multi-device fast charging lineup, GaNPrime.
And today, we got the brand new GaNPrime 120W charger, also called 737 charger.
It adopts the world’s first HFB topology developed by Anker and Infineon and supports dynamic power distribution.
So, let’s take it apart and see what’s inside.
Bill of materials (BOM)
------------------------------------------
Time-delay Fuse: Better Electronics (5A 250V)
Safety X2 Capacitor: DGCX (0.47μF)
Film Capacitor: DGCX (1μF 450V)
PFC Controller: ON Semiconductor NCP1623
GaN IC for PFC Boost: Navitas NV6136A (170mΩ, 700V)
PFC Boost Rectifier: Pingwei MUR5JGER (5A, 600V)
Bypass Diode: Pingwei GS3MB
Electrolytic Capacitor: Yongming (100μF 420V)
Primary Controller: Infineon XPDS2201
GaN IC: Infineon IGI60F1414A1L
Optocoupler: EL1018
Synchronous Rectifier Controller: MPS
Synchronous Rectifier: Infineon BSC0802LS
Solid Capacitor: Yongming
SMD Y Capacitor: Anshan KeiFat
Protocol Chip: Ismartware SW3536
MOSFET: Infineon BSZ018N04LS6 (40V, 1.8mΩ)
Buck MOSFET: Infineon
VBUS MOSFET: Infineon BSZ018N04LS6
Current Sense Amplifier: SG Micro SGM8199A1
MCU: Eastsoft ES8P5066FJNK
Chapter
----------------------------------
0:00 Intro
1:33 Test
2:27 Teardown
3:49 Analysis
8:15 Summary
For more details. You can visit our website:
www.chargerlab.com
SOCIALS:
Instagram: / chargerlabs
Facebook: / chargerlab
Twitter: / chargerlab
For Business Inquiries: info@chargerlab.com
Пікірлер: 71
the conslusion section of the videos should be about whether u like it or not, is it using good components, would u personally buy it. Not stating the features and specs again.
@mvevitsis
2 жыл бұрын
Agree
@dondiegodelavega2571
2 жыл бұрын
Agree
@Mobiltelekomnet
Жыл бұрын
yes
@ootz0rz
Жыл бұрын
Yes please!
@leviathon1113
Жыл бұрын
You can derive that conclusion yourself I would presume. Components are well insolated and stated in the video latest technology are supported.
That's the review world needs! Thanks a lot. This is soooo nice compared to boring default marketing-filled keynotes.
No wayyy you added 4K!! Thank you so much, you are the best!!!
Awesome work! Way more detailed than I was expecting :) Instant sub!
@ChargerLAB
Жыл бұрын
Thanks for the sub!
That extra hand at 8:06 spook me.
@zockerbude2585
2 жыл бұрын
😂
The anker event was superb.
Gracias por el vídeo. Es muy interesante ver los cargadores por dentro.
Nice demonstration 👍🏼👏🏼👏🏼
Please hook up your chargers to a Spectrum analyzer to measure harmonic distortion of current.
I wish you would elaborate on how strong the suction was.
So is there a direct connection from a/c to the USB side or its it fully isolated? Or would I need a surge protector to protect the USB devices from surges and and spikes.
I'd be curious how this compares to SlimQ's chargers. From my research they seem to be a worthy competitor to Anker's new products
Can u make teardown video of 70w spigen arc station pro
Nice Video"s, your are the best
REALLY usefull channel ❤
Hi was wondering have you done a teardown of Alogic GaN chargers, just interesting to find out who makes the GaN chips in them and also the other components used.
@ChargerLAB
Жыл бұрын
We haven't.
5:30 For such high end or pricy charger, to use a cheap electrolytic capacitor?
mine is eu version output but doesn't has a suction pad, is it OK? or I should go to retailer and ask for it?
Engineering focused reviews? Yes please.
Hello, can you do a teardown of those cheap "GaN" branded chargers?
I wonder if you could do Anker's new 737 battery that can input and output at 140W.
@ChargerLAB
Жыл бұрын
Thanks for the advice. We'll consider that.
Thank you for the video but we would love to see real tests of the output watts. Some people on Amazon say it only delivers 88-89 watts only. It never reaches 120w. Is it true?
@ChargerLAB
Жыл бұрын
Coming soon!
Why oh why didn't they make this the same 140W spec to match the 737 Power Bank I don't know, especially since that power bank can also take 140W in, it would have been the perfect match.
why pps only to 11V ?
Do you have any plan to review the solar power stations? like anker 757, bluetti ac 200, ecoflow delta pro?
@ChargerLAB
Жыл бұрын
We did it: kzread.info/dash/bejne/f6iFybGqosqaXag.html And planning to do more.
How about car and motor cycle USB power supplies? Test those???
@ChargerLAB
Жыл бұрын
Good idea.
excellent
What happen to you WORXs Dremel ???
No USB PD 12 V? PPS up to just 11 V? Sucks.
I like your video! bur rather than an "analysis" this might be just a video telling the part used inside the charger.
no testing on power efficiency, output, idle power, PFC?
@ChargerLAB
Жыл бұрын
This is the teardown video. power efficiency, output, idle power belong to charging review video.
Does this range come in the UK power version?
@KieranBowley
Жыл бұрын
Sure does!
can you also test the heating of chargers while charching the devices? it would be great😊
@zockerbude2585
2 жыл бұрын
Yeah. That's a great idea!
@ChargerLAB
2 жыл бұрын
We will pick up some chargers to review it.
@Mobiltelekomnet
2 жыл бұрын
@@ChargerLAB thank you :)
That pink silicon has to be a heat dissipator right?
@ChargerLAB
Жыл бұрын
For heat dissipation and fixing.
all phones and devices should suit the usb pd standart.
@robertobokarev439
3 ай бұрын
Not higher than 100W. Power Delivery added stupid 48V charging... for Li-Pol accumulators... with no protection... They should either refuse from it and move to 20V/12A, or no way I'm using it.
Does anyone know if this can be used as a power bank as well?
@ChargerLAB
11 ай бұрын
This one can't, but you can check out these two hybrid chargers that are also from Anker: kzread.info/dash/bejne/ZqJ_lNV_p8K7m8o.html kzread.info/dash/bejne/YoOtuJismJWYqrw.html
Can you recommend us best all in one charger?
@Mobiltelekomnet
2 жыл бұрын
new anker chargers
@robertobokarev439
3 ай бұрын
PSDA 3D 300W GaN 4-port charger. The company is small but check it out, it has 140w pd 3.1 and own OLED monitoring screen (for voltage and power output on every port)
please teardown some mcdodo chargers please
@ChargerLAB
Жыл бұрын
We're planning.
Surprised no Apple 2.4A Great video
Always love your content. at 5:54 when you pronounce 140mΩ as one hundred forty microFarad, actually the correct one is one hundred forty milli Ohms.
@ChargerLAB
Жыл бұрын
My bad.
So it doesn't support VOOC?
@ChargerLAB
Жыл бұрын
No. VOOC is the OPPO's private protocol.
@remainsmemories626
Жыл бұрын
@@ChargerLAB Well, they had VOOC-enabled chargers before, they only needed to use the correct charge controller ic, which is pin-compatible with one they used here. I once modified my baseus charger, that had sw3516, soldered sw3518 on its place and got VOOC support
@n.shiina8798
Жыл бұрын
@@remainsmemories626 just like most proprietary charging protocol. it's really hard to find their aftermarket counterparts. their phone does support PD but at meh power rate
Goodbye repairability
Too bad Anker reputation is destroyed by the Eufy incidents. I will by from other brands in the future. And it's sad, cuz I liked their cables and chargers.. even the powerbanks.