TEAM ASSOCIATED SR7 Hoonigan BIG BLOCK INSTALL HOW TO
Ойын-сауық
#KENBLOCK #SR7 #TEAMASSOCIATED #HOONIGAN #udrc
Servo:
PHBPH633MCW
Powerhobby 633MCW High Voltage Waterproof Coreless Steel Gear Servo, w/ Aluminum Case
Perfect for scale crawlers, 1/8 1/10 monster truck, 1/8 1/10 2WD and 4WD buggies, as well as 1/8 scale buggies and trucks. In addition, this servo is great choice for boats and other application which require high power, high voltage and waterproof. Waterproof IP67 level up to 1 meter which allow driving in the rain, puddles, snow and mud. High reliable and durable patent gear design. Full metal case for fast heat disipation. High precision digital control circuitry.
Features:
High performance standard digital servo
Built-in magnetic sensor
Waterproof IP67
High precision steel gear
High efficiency coreless motor
High strength dual ball bearings
Specifications:
Operating Voltage: 4.8-8.4 V
Operating speed: 0.160sec/60 @ 6.0V, Operating speed: 0.1450sec/60 @ 7.4V, Operating speed: 0.135sec/60 @ 8.4V
Stall Torque: 360 oz-in @ 6.0V, Stall Torque: 400 oz-in @ 7.4V, Stall Torque: 445 oz-in @ 8.4V
Size: 40*20*37.5mm (1.57 x 0.78 x 1.46 in)
Weight: 2.59oz
Spline: 25T
SR7 Hoonigan RTR $669.99
www.lhhobby.com/sr7-hoonigan-...
Features
Officially licensed 1965 Ford Mustang Hoonicorn body
Injection-molded rear spoiler and diffuser
Molded turbos and intake manifold
2.4GHz radio system
Reedy high torque 1523MG metal gear servo
Enclosed receiver box
17mm wheel hexes
Adjustable front and rear body mounts
2-piece adjustable motor mount to accommodate taller gearing
Dual battery trays with adjustable length and hook and loop strapping
Heavy-duty CVA joints front and rear
Integrated chassis bracing for strength and rigidity
Upper suspension arms with adjustable camber and roll-center
Aluminum wheel hexes and nuts
Integrated servo saver
Anti-roll bars front and rear
Belted slick tires
Set up for balanced handling performance out of the box
Adjustable wheelbase
Powdered metal servo horn
Metal ball bearings included
#KENBLOCK #SR7 #TEAMASSOCIATED #HOONIGAN #UDRC #TRAXXAS #LOSI #ARRMA
Пікірлер: 13
Hy good job 🤙👍
Yessir, great tips and looking good💪💯
Nice bro
@UDRC85
2 ай бұрын
Appreciate that bro.
Mi e came in and did not even power it up, just got straight to fixing it. Took apart all diffs and filled properly. Applied gtease to rear ring gear that was dry and the grease was all over the inside. Tightened all screws as most were not torqued down. Especially the front hubs...those screws werent all the way down and will fall off after a few runs (although just noticed you mentioned they shouldnt be tightened as they cause binding...didnt check that myself so I will loosen again) Also installed a Flysky gyro receiver, QS8s, A castle BEC and waiting on a servo to replace this one.
@UDRC85
Ай бұрын
Definitely. Also loosen those screws just a bit not much. Adjust from the top and bottom screw.
Good video bro 💪🏾💯
@UDRC85
Ай бұрын
I appreciate that.
Had that same issue with my redcat kaiju steering I fixed it by filing the edges of the hubs then using brass shims to keep the plastics from binding up
@UDRC85
Ай бұрын
Nice sound like a plan.
6s with a 5.5v bec? wtf.
@rocketpunchrc7143
Ай бұрын
They did bare minimum with this car...they should have released it as a roller
@jeepmanxj
Ай бұрын
@@rocketpunchrc7143 yeah. I've been an associated guy for decades and I love the rc8 but this thing makes me sad