In this video I am testing/using the TBS Crossfire system: tiny.cc/TBS-Crossfire-TX16s on the AR Pro Wing: tiny.cc/AR-Wing-Pro 🤘🏻 For a full kit list with links please see the video description. Thanks for watching 👍🏻

10 kilometers away and below the tree tops. Awesome flight. Thanks.

@AdamGdoesFPV

3 жыл бұрын

Thanks 👍 This is the must fun type of flying for me

I don't know why I have been nervous about using the Crossfire for longer range, but I'll give it a shot now. Great vid Adam Thank you.

@AdamGdoesFPV

3 жыл бұрын

No worries. Make sure your failsafe is working well and go push the range👌🏻

Nice Video. No reason to use anything else but what you got. Radiomaster Tx16 with a Micro TBS, it is the perfect combo for anything from Drones-Planes-Wings.

@AdamGdoesFPV

3 жыл бұрын

Yeah I'd agree it's a great combo. It'sthe kit i'd recommend people go for if they're just starting out in the hobby now. Skip the 2.4g control with it's fail safing😁

That view is A M A Z I N G

@AdamGdoesFPV

2 жыл бұрын

It never gets old ⛰ 😍

Welcome to the CRSF club :) I'm amazed how good your video is and how you fly 12km out! Nice run!!!

@AdamGdoesFPV

3 жыл бұрын

Cheers Stuwe. I cannot wait until the weather improves, once I can fly in calm conditions I'll try and push it a lot lower than this :)

@stuweFPV

3 жыл бұрын

@@AdamGdoesFPV can't wait to see it :)

You're at this field so often they should name it after you. Nice flight and thanks for sharing the video.

@AdamGdoesFPV

3 жыл бұрын

Haha yeah well at the moment with restrictions in place I can’t go from home, so the local flying field it is. I do love this spot anyway 😁 cheers

As always; no-nonsense concise information. Thanks.

@AdamGdoesFPV

3 жыл бұрын

Thanks Damien, I appreciate the great feedback🙌🏻😊

Hi Adam, awesome video as usual. it is Nice to see that even with everything installed so close to each other,, there is no interference (as I was told to place the "trinity" as much apart as possible).

@AdamGdoesFPV

3 жыл бұрын

Thanks 😊 Ideally you do want to keep the 3 components separated as much as you can as it will give you the best chance of it performing well. However, as you can see from this video it doesn’t have to be a huge distance apart.

Brilliant as usual, especially with that wind..

@AdamGdoesFPV

3 жыл бұрын

Thanks! Yeah I can't wait for calm days

Awesome vid as always. I'm just now getting into I've been using the 2w crossfire for years now, but It looks the real star of the show is your 1.3g video, Crystal clear!

@AdamGdoesFPV

3 жыл бұрын

Oh yeah 1.3G video is what makes FPV fun for me. Without it I’d feel quite restricted

Great video. I learn a few new things (to me) from each of your videos. Was surprised at how low you managed to maintain beyond 7 km out. Definitely a fun route. Thanks for sharing.

@AdamGdoesFPV

3 жыл бұрын

Thanks for watching! I do love this route, I plan on running it extremely low in the summer. Glad it was helpful. Cheers

Lovely video and you have a great spot.

@AdamGdoesFPV

3 жыл бұрын

Thanks 😊 I do love this location 🤘🏻

Had a lockout on my R9M at close range yesterday on my quad. Not heavily invested in it, I decided to give it the push. Ordered a Crossfire Micro V2 TX Module and a Nano SE RX.....The new TBS App that runs under OTX finally pushed me into it. This and the RF in OSD etc...This is your fault....lol...

@AdamGdoesFPV

3 жыл бұрын

Lockout at close range is bad news, flying with a reliable control link makes the hobby so much more enjoyable. I think buying a CF is a good move and you’ll really like it. The app is nice, this user friendly setup and config is a huge advantage over Dragonlink. Anyway, if it’s my fault you bought one, it’s a good thing, so... you’re welcome 😄

@EnglishTurbines

3 жыл бұрын

@@AdamGdoesFPV I think it was a combination of the TX on Flex dropping its output and the VTX antenna being between me and the Rx antenna. It's a bit weird TBH, the RX just froze but I did have FS set to hold, which it did. The RSSI on the DVR was nailed at 99%...the quad was pretty low, so no real damage...I'm sure CRSF will be a more secure link...😳😀😀🇬🇧

@AdamGdoesFPV

3 жыл бұрын

CF won’t let you down 👍🏻

So impressive almost hard to believe. I’m having trouble getting over 1-2 km running at 1w.

@AdamGdoesFPV

2 жыл бұрын

Sounds like you have either an issue with your setup or interference in your area. People have been known to go as far as 80km on 250mw 😯

This is how this would go for me: Step one: Go out and get a long range FPV system. Step two: Buy an ATV or a horse or rent a helicopter to retrieve my model when something fails and it goes in somewhere so remote that no human has set foot there in a thousand years... ...I think I'll do it anyway. 😬 Great video, excellent background comments.

@AdamGdoesFPV

2 жыл бұрын

Haha sounds like you'd have fun collecting it anyway 😆 Thanks for watching and for the feedback 🙌🏻

Great video Adam! And what a good video quality. I am very impressed.

@AdamGdoesFPV

3 жыл бұрын

Should hope so when I have a $360 video antenna on the ground 😅But yeah video is pretty solid and it seems to play nicely with CF👍🏻 Cheers

Great clip, I'm a huge crossfire fan, it works great and the whole thing is so simple to configure and update 👍

@AdamGdoesFPV

3 жыл бұрын

Couldn't agree more! I love the user friendliness.

nice combo. 868/915 and 1.3GHz 👍

@AdamGdoesFPV

3 жыл бұрын

Sure works well 🙌🏻

I need to get one of those 1.3 Ghz video systems.

@AdamGdoesFPV

3 жыл бұрын

For sure it's a complete game changer moving from 5.8g. The freedom it gives you is incredible🤘🏻

Amazing flight/video once again

@AdamGdoesFPV

3 жыл бұрын

Thanks Jimmy😃

In line with what others have said and problems Coyote had I’ve stayed away from 1.2/3 with CRSF. Your video and link look rock solid. Think I might have to give it a go. Great vid by the way. Looking forward to the river run premier….

@AdamGdoesFPV

2 жыл бұрын

Yeah I heard of people having problems but I just needed to get out there and try it for myself. As you can see, no problem at all 😄 I think the key to it is making sure you're not stood too close to your groundstation. Enjoy

Dang the osmo video is so smooth

@AdamGdoesFPV

3 жыл бұрын

Yeah it's a good piece of tech. I still prefer it to any of the gopros that exist

It's hanging out like shit in an ice hole.😄 Thank you for sharing your experience with cross!

@AdamGdoesFPV

3 жыл бұрын

haha🤪 no worries mate

Love your flyings!!

@AdamGdoesFPV

3 жыл бұрын

Thanks 🙌🏻

Great video, and a awesome wing

@AdamGdoesFPV

3 жыл бұрын

Thanks Kyle😃

Well hey, I learned that that Xfire info is available in the Inav osd!! Did not know that.

@AdamGdoesFPV

3 жыл бұрын

It's really handy to have! You get a much better indication of how your link is in comparison to RSSI. Cheers for watching Mike

@ObsidianFPV

3 жыл бұрын

@@AdamGdoesFPV not sure how I missed this. lol

Thanks for the detailed info. That's a fantastic place to fly. If you know where all the cables or other dodgy spots are on that route and if you go there on a calm day, then you can get down really low where possible. That'll be awesome.

@AdamGdoesFPV

3 жыл бұрын

Yeah I'm looking forward to some calm days. I have plans to try and fly under the bridge at 7.5km, but it's very high risk of crashing.

Nice real world demo matey...from your Irish Mountain top...lol...I like how iNAV?...shows your RF level. I wish the R9M system could do that...Did you have your CRSF antennas vertically polarised?...Silly question I know..🤔🤔🤔😀🇬🇧🇬🇧

@AdamGdoesFPV

3 жыл бұрын

Cheers mate, yeah the OSD items are super handy! I love this kind of info.Yeah I have antennas vertical on both ends 👍🏻

Great video! I have DL and always had an itch for crossfire, but the thing with 1.3 ghz always made me think twice, but after watching your video, on the first chance I get (moneywise, he, he), I´ll grab the CF MT V2, Cheers!

@AdamGdoesFPV

3 жыл бұрын

Glad I could help! I was unsure what to expect but it works great. Cheers

@rclatebloomer7880

2 жыл бұрын

@@AdamGdoesFPV Did it! Bought the CF Micro V2, just one question, do I have to have a notch filter with my 1.3 Groundstation? (sorry if you´ve already answered) Cheers!

Crossfire looks solid af mate!! Very interesting seeing the stats on screen, especially seeing how it deals with keeping a good connection with a combination of increasing the power (I'm assuming dynamic power mode on the TX) and changing RF profile to different frequencies. ☁ ☁ ⚡ ✈ ⚡ ☁ ☁

@AdamGdoesFPV

3 жыл бұрын

Cheers mate. Yeah using dynamic power mode, should have mentioned that at the start really. Crossfire is certainly very capable! 😁👍🏻

dang adam .i really enjoyed that one. tell me one thing tho.how did u get the crossfire output power and the lq in the osd?is that part of the most recent nav?thank u

@AdamGdoesFPV

3 жыл бұрын

Thanks, glad you enjoyed it🤘🏻 I think it's new OSD items in iNav 2.6.

Thanks, very interesting ... I would have guessed that 1.2 GHz video TX, being relatively close to the 900 MHz crossfire TRX's frequency would desensitize it, but it seems they have quality bandpass filters on the front end of the tiny trx that avoids this effect. Since we have mobile networks operating around 900 MHz in Europe, I guess they had to add very good front end filtering to maintain good receiver sensitivity without being overloaded by the very strong nearby signals. I am planning to build a long range wing this Q2 as well and am still unsure if I should go with a digital high res DJI FPV system or since I am a radio amateur, also operate a 23cm (1.2 GHz) analog transmitter that I can run with as much power as I like. If going analog I have to put a real ground station together, which has the beauty that I can build my own high gain antennas and get a very good range. The problem is that I am already spoiled with a digital 720p HD signal from my Parrot Disco wing and as I see here on KZread, watching analog can be painful at times. Though your analog system looks pretty good. I guess I have to make up my mind soon and order stuff from China, since it will take a month to get here and the fun flying climate is coming to Germany soon.

@AdamGdoesFPV

3 жыл бұрын

Whatever they've done it works. I'm running mine on the legal channel here which is 868. I also have a 720p HD FPV system on my mini Talon (Shark Byte) and to be honest although the picture is clearer, i prefer 1.3g analogue so much more. The freedom it gives you cannot be matched by any HD system that exists today unfortunately. In fact I'm going to sell my HD system and stick with analogue 1.3. Cheers

Hey Adam, Richard here (Flyboysee). Glad to see you’re still doing the LR and building, flying etc. I’m keen to get back into it... could we have a chat sometime? Sorry if you saw the LDO podcast, I totally forgot your name :) Hope you’re doing well!

@AdamGdoesFPV

3 жыл бұрын

Richard! Welcome back, great to hear from you! Yeah I'm still into it and glad to hear you're getting back into it too. No worries for forgetting my name, it has been like 5 years since we last spoke 😂. Yeah happy to have a chat some time. Cheers👍🏻

Thanks for sharing :) Didn't think crossfire and 1.2/1.3GHz was a good combination, thanks for showing that it is. You are using 5.8GHz relay from ground station to goggles right? By the way the link for Matek VTx in your description doesn't work. Is it 630mW?

@AdamGdoesFPV

3 жыл бұрын

Glad I could help! Yes it seems a decent combination for me so far, had no issues with it. Yes 5.8g relay to goggles. Thanks for the info on the link, I'll fix it. The vtx is the 630mw yes: www.banggood.com/MATEK-System-1_2Ghz-1_3Ghz-9CH-VTX-1G3-9-International-INTL-Version-FPV-Video-Transmitter-for-RC-Drone-Goggles-Monitor-Airplane-Long-Range-p-1602996.html?p=RB010715711422015054&custlinkid=1514695&cur_warehouse=CN&ID=6301681

Awesome video as usual Adam. I also took the plunge into Crossfire, sold all my R9 gear. Very happy with it, couldn’t believe how easy it was to bind RXs and setup. Needed 3 hands binding FRsky receivers 😂. Will you go full out CRSF on all models now? Or stay DragonLink?👍

@AdamGdoesFPV

3 жыл бұрын

haha I hear you on the FrSky binding! CF is for sure the most user friendly of all control systems I've used, real nice design. I'll stick with Dragonlink on the planes that already have it as it just works, but new planes will probably get CF as it's easy to get hold of and cheap! Cheers mate

Great content as usual! 👍 How much did the crossfire affect the video quality? Did you use a notch filter? Didn’t know you could use crossfire with 1,3 ghz video without interference. That’s why I use 433 ghz mfd link but I would love to use the crossfire instead.

@AdamGdoesFPV

3 жыл бұрын

There was no loss in video quality, as you can see from the live feed my video was pretty solid throughout most of this. I used no notch filters, I believe the trick is physical separation between your CF Tx and tour video receivers. Take a look at the landing at the end you’ll see I was stood a nice distance away from my tripods. Cheers 😊

Adam, awesome video! My Mini Drak currently is equipped with a Myflydream 433MHz RC link, with 1.3GHz video. I'm thinking of trying Crossfire on it and am curious how the 900MHz and 1.3G video play with each other? Did you have to do any filtering on either the wing or your goggles?

@AdamGdoesFPV

3 жыл бұрын

Hi, no filtering on either end, this is just plug and play. I had some separation between my CF tx and video rx and I believe this really helps. Cheers

always Awesome.. compare to other type you have, MTD mini crosswind, which one do you prefer for long range fpv?

@AdamGdoesFPV

3 жыл бұрын

The MCW for long range. It’s more stable and relaxing to fly, it can carry whatever you want, it can fly for hours if you need it to... and it’s super quiet in comparison. Cheers

@MrBulukuduk

3 жыл бұрын

@@AdamGdoesFPV Thank's adam.. Seems AR wing is born for speed according to specification, and also other prove that both type can reach 200km flight than glad to hear from you who have both plane.. :)

Great flight 👍 is it the 900mhz tbs crossfire?

@EnglishTurbines

3 жыл бұрын

868mhz only here in the UK....915mhz is our Cell phone system...🤔🇬🇧

@AdamGdoesFPV

3 жыл бұрын

It's switchable between 868 and 915. Mine us running on 868. Cheers😃

@RakishRc

3 жыл бұрын

@@AdamGdoesFPV Nice to know that 👍

Range is incredible flying so low. Video quality is near perfect as well.

@AdamGdoesFPV

3 жыл бұрын

That's 1.3g with good antennas for you😎 for me nothing can beat the experience of this setup. Thanks

please test expressLRS

@AdamGdoesFPV

3 жыл бұрын

Probably won't happen sorry. Crossfire is just so cheap and works really well

@caringcenter5375

3 жыл бұрын

@@AdamGdoesFPV ExpressLRS very cheap, just use R9M flashed to expressLRS

elrs 2.4g is coming so!

@AdamGdoesFPV

3 жыл бұрын

Won't be for me as 2.4g doesn't play well with 1.3g video 👍🏻

Whereabouts are you flying? Are you in the UK? The scenery is lovely!

@AdamGdoesFPV

3 жыл бұрын

Not UK, this is Ireland. It’s a lovely flying spot 😎

Hi Adam! Thanks for video, waiting for my pepperbox now to dive into 1.3 🙂 By the way did you use telemetry in this flight? If yes where did it fell off?

@AdamGdoesFPV

3 жыл бұрын

Pepperbox is awesome, you'll love it! The tx gives voice commands to tell me when telemetry is lost and recovered. I did lose telemetry for small periods of time maybe 3 or 4 times during this whole flight. Cheers

Hey Darren I know you no longer have your ar wing pro but looking at this video I'm just wondering how and why did you install the immortal t antenna out on looks like almost to the wing tip? I have new wing s coming for mine and will do the same as yours. Were did you mount the receiver? Did you use the extra long 120mm antenna? I've always mounted my rx antenna vertical in fuselage on one side and 5.8ghz fpv antenna on other side of fuselage. I'm thinking the way you do it might help with signal for both. Just to let you know after following your advice on autolaunch this wing launching pretty good, I used to launch in cruse mode and I never took a few steps in direction of flight, I now activate autolaunch in manual,a few steps forward and away it goes in straight line like magic. It's taken me 2 years, alot of glue, a shit load of spare parts but this technique is what resolved my issues. Thanks so much

@AdamGdoesFPV

2 жыл бұрын

Hey, I mount the rx on the wing for good separation of antennas. The ARPro is designed to make this really easy as it already has the compartment out on the wing with the wiring. I just put the Rx in the wing and used standard antenna. Hope this helps

Awesome flight. Do you have line of sight for the whole flight?if so pretty incredible location.

@AdamGdoesFPV

3 жыл бұрын

Not quite, I'm behind land and trees for a lot of the river section. Thats why I run high gain antennas for video😎 cheers

Hey Adam, I noticed the immortal T is mounted vertically on the wing. Was it also vertical on the TX side? I thought the crossfire Micro V2 Tx comes with a stock immortal T antenna which is fixed on the horizontal plane. Is this true?

@AdamGdoesFPV

7 ай бұрын

Hi, no not true, the antenna on the tx is bendy and can be twisted so that you can have it vertical when flying and horizontal for storage

What's up with the Matek VRX-1G3-V2. He used to have big problems. How things are now with TBS.

@AdamGdoesFPV

3 жыл бұрын

I'll be trying it again soon with CF

Anyone know if I can find a wing that comes with everything but the control? & I could bind to say a dji control or a stripped down control (like the Mav Mini or the miniSE type)

@AdamGdoesFPV

Жыл бұрын

You can buy some planes that come with an 'FPV' option. This usually includes everything you need apart from the control gear and the batteries. E.g. The Flying Fish tiny.cc/FlyingFish

I was wondering if it was possible to use 6s Lion pack with AR PRO PNP ESC ? Thanks !

@AdamGdoesFPV

3 жыл бұрын

The stock PNP ESC is only rated for 2-4S so I'd recommend using a different ESC if you want to run 6S

Hey Adam, Will you review insta360 go2?

@AdamGdoesFPV

3 жыл бұрын

I’ll consider it. I do love the Insta 360 full size but the first ‘go’ had a 5min battery life rendering it fairly useless or at least very limited.

I am a rookie here, but I have a question, before getting the controllers, and gadgets part sorted, how do you get the body of the drone, is it hand made or is there a marketplace for it.

@AdamGdoesFPV

2 жыл бұрын

Hey, look in the video description there are links to every part I use, including the plane. All the planes I fly are kits, not self moulded. This plane is called the AR Pro: tiny.cc/AR-Wing-Pro

So no interference using the Crossfire system with 1.3 video?

@AdamGdoesFPV

3 жыл бұрын

As much as you see in this video 😊

Are you using notch filter !

@AdamGdoesFPV

3 жыл бұрын

Nope. No filters on anything

Great video, I've been trying to add GPS display on my TX16S , with TBS Nano receiver. my telemetry is not showing GPS coordinates and main on board battery readings. What do I do to get the data to display? I have the Matek F-405 Wing FC on my AR wing.

@AdamGdoesFPV

2 жыл бұрын

Hey, I don't have any telemetry data displayed on my Tx... I just use the OSD in iNav to display on my live feed.

@rctechproflying1903

2 жыл бұрын

@@AdamGdoesFPV If you lost connection with your aircraft how do you get you GPS coordinates? When I had the R9M with the R9mini receiver I was able to setup telemetry to the radio display with that, I was able to take a picture of the coordinates on the transmitter display with my phone and paste it in a software on my phone and it will give me the location with direction to the lost aircraft it worked like a champ. Thanks for your reply.

@AdamGdoesFPV

2 жыл бұрын

@@rctechproflying1903 just take the last known coordinates from the DVR recording. My coordinates are included on my OSD

@rctechproflying1903

2 жыл бұрын

@@AdamGdoesFPV yes, i receive data on my goggles off the FC. I’m going to try using the channel 3 and 4 for TX and RX on the Nano receiver and get data from the FC off the RSSI out and see if that will work. I will let you know. How do you like the AR Wing Pro frame? Have you flown the AR wing 900mm?

Hi, where you on high ground when you launched/landed ?

@AdamGdoesFPV

2 жыл бұрын

I was on a hill. You can see it at the end of the video maybe. The river is over 100m below me

What would you suggest for a lipo battery and charger?

@AdamGdoesFPV

2 жыл бұрын

I use a 2 channel Turnigy Reaktor charger. They don't have the exact model anymore but I think this is the newwer version of it: hobbyking.com/en_us/turnigy-reaktor-120-duo-2x120w-balance-charger-ac-dc-eu-plug.html?affiliate_code=HIMTQOSVVQZHJLM&_asc=2349685468 Depends how many batteries you need to charge and how quick you want to be able to charge them all. Cheers

@cactusjackthedesertrat5601

2 жыл бұрын

@@AdamGdoesFPV thank you very much Sir

Okay I am relatively new to FPV and saw that you can get an insane range with tbs crossfire. But what about the video? How is it possible to get a better video signal and a better range? Can crossfire do that too?

@AdamGdoesFPV

2 жыл бұрын

No Crossfire is control link only, has nothing to do with video. If you want to see and understand my video gear watch this kzread.info/dash/bejne/mYKMx9Wwe83TnbQ.html

Adam, I thought TBS Crossfire and 1.2/3 had issues when utilized together?

@AdamGdoesFPV

3 жыл бұрын

I hear some people have issues with the video feed yes. But from what I read if you keep a bit of separation between your CF tx and your video receivers you should be fine. So far I've had no issues at all

What version of firmware do you use in the crosfire module?

@AdamGdoesFPV

3 жыл бұрын

Not sure actually. I'll check it out later, but it's whatever was the most recent version in Jan this year

Hi Adam quick question 🙋‍♂️ new flyer got tx16s about to buy the crossfire you have , not running a fc at mo do I need a csrf to pwm in between till I get my fc thanks in advance

@AdamGdoesFPV

Жыл бұрын

Hi Jay, yes you'll need a PWM converter as without an FC you have to plug servos and esc cable into the RX

@Jay-zc7iq

Жыл бұрын

@@AdamGdoesFPV Cheers fella , so I picked up a couple pwm converters , decided on a sparrow 2 for rth think I run the nano on sbus that way or something, cheers sir very helpful & absolutely love the flights

will you stop using dragon link ?

@AdamGdoesFPV

3 жыл бұрын

No I will continue to use DL. It's super reliable kit and I have it installed on a bunch of planes.

What prop are u running on this video?

@AdamGdoesFPV

2 жыл бұрын

Just the stock prop that came with it

How is your RSSI so high? I'm using the exact same CF module and rx and antenna. On 500mw as soon as I'm 200m away my RSSI is at 40and it just slowly goes down from there. I think maybe different firmware is reporting different RSSI levels

@AdamGdoesFPV

3 жыл бұрын

2 things. Firstly there is a problem with your setup. You should not be on 500mw at 200m. I’ve heard of people being at 10km on 25mw in ideal conditions with a good setup. Secondly are you talking LQ or RSSI, because I’m displaying LQ not RSSi.

@jhughes2286

3 жыл бұрын

@@AdamGdoesFPV I generally don't use 500mw when flying close freestyle, this was 200m on the way out to max range which seems to be around 2.75-3km

@jhughes2286

3 жыл бұрын

@@AdamGdoesFPV Yes I agree, I was talking about RSSI being poo to begin with, now I'm talking about LQ being poo at 3km?

@jhughes2286

3 жыл бұрын

@@AdamGdoesFPV Could you check and see what your RSSI is at like 2.5-3km? I feel like that information could be useful. I see that you're displaying Lq instead, and it's pretty much 100-90, I must be in a very noisy environment I Fail-safe at 3km my LQ is solid at 100 up to 2.5km then it goes to 60-70 and RSSI is 50 at 100m then it shrinks to 35or less at 1km.

how did you get the TX output on the OSD ?

@AdamGdoesFPV

Жыл бұрын

It's just an OSD element you can add in iNav. On the OSD tab you have to scroll down quite a bit

@mandel4889

Жыл бұрын

@@AdamGdoesFPV ah cant do it on betaflight?

@AdamGdoesFPV

Жыл бұрын

@@mandel4889 I believe you can. But I don't fly BF

where did you put extra lead to get cg?

@AdamGdoesFPV

3 жыл бұрын

I didn’t. Balances without any.

@Chris-vc1dh

3 жыл бұрын

@@AdamGdoesFPV MINE NEEDS LEAD

@AdamGdoesFPV

3 жыл бұрын

@@Chris-vc1dh you need a heavier battery/HD camera. People have been finding it hard to hit CG on these but with the Osmo action and 7000 4s2p lion pack it’s spot on

@Chris-vc1dh

3 жыл бұрын

@@AdamGdoesFPV IF I PUT HEAVIER PACK THEN THE LID WILL NOT SHUT

@AdamGdoesFPV

3 жыл бұрын

Just the wrong pack then. ZOHD 7000 4S2p fits perfectly

Lol that antenna is not 1.3ghz it's 1280ghz totally different channel

@grim-upnorth

3 жыл бұрын

I think you mean 1280MHz which is 1.28GHz.... round it up, 1.3GHz I don't see the problem here. Whilst the antenna might indeed be engineered to work best with 1.28GHz, it is in fact very suitable for use on channels that are closely either side of that specific channel. In the same way as you can really only buy antennas for the 5.8GHz "range" of frequencies, these manufacturers tend to make antennas for the 1.3GHz "range" of frequencies.

@AdamGdoesFPV

3 жыл бұрын

Joey I can work out if you’re joking or if you’re just a bit confused 🤔

@skyforce1983

3 жыл бұрын

Hey Adam I just wanted to get your attention and let ya know I like the long range stuff and I wanna see more of it I have the same setup as you already I was joking man

@grim-upnorth

3 жыл бұрын

@@skyforce1983 you got me too 😉