Thanks for watching. Don't forget to SUBSCRIBE, I'm going to continue to make videos. Hit the Like button if you found the video helpful.

Great video! I am doing my own drywall and taping. I also bought the Colimbia tube and tools. I found they are very good. You video are better than the Columbia's own commercial tutorial videos.

Great video, excellent description of the taping accessories.

Very skilled at your trade! Clear and to the point teaching. Thank you.

Thanks for giving great advices ...very helpful for me....I agreed with you...This is best method .

Excellent video. Very informative.

@Interior_Works

4 жыл бұрын

Thanks, I'm going to do some more corner videos soon on various techniques I've experimented with

Great video I use a bazooka myself recently bought a used set off tools that came with all the tools you used in this video I’ve never had any problems with the recess edge not getting filled up, if your having that problem with a bazooka you should thin your mud down some more my bazooka is a Sierra rugged and it puts out a lot of mud behind the tape works great I tried this method just cause the tools were part of the package deal and works just fine I prefers a bazooka it’s just faster, I’ve been doing drywall for 7 years, again great video nice job!

Really good video. Thanks a lot.

Thank you. Awesome. Very well explaned

@Interior_Works

5 жыл бұрын

Thanks

lightning! well done and thanks

Thanks for sharing. Not a lot of vids on semi auto taping. Everybody has their preference for corners. I've been trying a few different ways, will have to try your way and see if I like it.

@Interior_Works

4 жыл бұрын

Yeah theres so many ways and tools, and combinations possible. Nice channel you got there, checked it out and subscribed.

@BrentDarlington

4 жыл бұрын

@@Interior_Works Thanks!

Nice Video, I like this set up, but specifically what applicator were you using on the end of the tube? Did it have wheels ?

can i use a corner finisher for the base coat or does it have to be the corner applicator? applicator

Some of the best drywall videos on KZread my brother.

using a compound tube and a flusher is the way i learnt how to do my internals easiest way i think i prefer the flusher to the angled head

@99cachorro

3 жыл бұрын

Me too, the flusher can really take a beating and they are cheap.

Are these Columbia tools..??

ต้องการอุปกรณ์ที่ทำครับ

Nicely done. I'll be switching to this method. Way faster, cleaner, and percise compaired to the bazooka or banjo with no blisters. Way faster to clean these tools as well. Thanks for sharing

Very helpful and awesome . What’s the next video

@Interior_Works

5 жыл бұрын

Thanks, I got a mix of a bunch of assorted things to upload soon, anything in particular, or tool you want a video of, let me know

do you find the corner roller pulls your tape off the wall if you get to close to the corner (does it to me everytime) also thinking could you get away with flushing with 2.5 flusher for tape then carry on with 3.5 angle head for the finish (asking because i only want to buy one angle head already have flushers) whats your thoughts on that?? ( EDIT: SEEN you vid and comments on the flusher vs anglehead thanks!)

@Interior_Works

4 жыл бұрын

My roller will mess up the tapes at the 3way, an inch or two out, never had it pull a tape more than that. Could be a difference in material or roller? If you had the corner really rolled square, and 2.5 flusher was new, sharp and pointy, you could technically finish over it with a anglehead, I tried it that way for a while but didn't like it. 3.5 Flusher over tapes imbedded with a 2.5" anglehead works really great though.

Where have you gone ?

Thanks .

awesome video !! so doe the second coat.. to you reuse the mud tube and re apply a secont coat and then go over it with a angle head again ?

@Interior_Works

4 жыл бұрын

Thanks, I was doing it that way for a long time, and it works, either with an anglehead or flusher/glazer. I've recently began using the anglebox now for finish coating inside corners.

@ThielTube

4 жыл бұрын

@@Interior_Works thanks a lot for your quick reply. I do a lot of interior remodeling kitchens and bathrooms and I always end up having to do the drywall myself. So I'm trying to up my game. I just ordered 2.5 in angle head and a 3.5 inch angle head. Along with the applicator tube and applicator heads.

@Interior_Works

4 жыл бұрын

@@ThielTube you could also put the anglehead right on the applicator tube, it's cleaner but often needs more than one pass. Can also somewhat influence the depth of the coat by how much pressure you push it against the wall.

Hello, What do you think about the colombia extendable handle with the flusher? About rigidity and comfort ? Thank you!

@Interior_Works

3 жыл бұрын

I've been very happy with it, I'm using the 4'-8' model, it's very rigid at 4'-6'. It can bow slightly at 8' length if pushed hard, but not enough to negatively affect its performance. This is the model I'm using: www.all-wall.com/ColumbiaTools-Extendable-AngleHeadHandle I also tried the 3'-8' twist-lock handle, it's not anywhere near rigid enough and wasn't suitable for either the flusher or roller when extended. I had to repurpose it to a sanding pole with an adaptor.

@rudygibson3527

3 жыл бұрын

@@Interior_Works thank you very Much! I will buy the 4-8 model for my flusher ! I dont like the twist lock handle...they have issues when a little mud is on it. Sorry for my english,i am french!

Great Video ! What size (length) is your Columbia Compound Tube? Also is the inside corner mud applicator that you use on the Tube a Columbia product as well?

@Interior_Works

4 жыл бұрын

Thanks. 42", I have the "24 and 55" as well but don't use them often. It's the Columbia applicator, I have a Can-Am applicator too, the way they put the mud on is slightly different.

@0.l.d.S.o.u.l

4 жыл бұрын

@@Interior_Works Is the Columbia or the CanAm the more user friendly applicator?

@Interior_Works

4 жыл бұрын

The difference I noticed is that the Can-Am seems to leave more mud, it's more suitable for their flusherhead system. Columbia applicator works best with either the 2.5 Anglehead or the 3" Flusherhead/Glazer. In my experience anyway.

@0.l.d.S.o.u.l

4 жыл бұрын

@@Interior_Works Thanks for your insight ! I'm going to get a tube soon and I'm doing alot of research! Your finishing looks top notch !

In my ignorance, once applied like this and dried is it just sanded lightly, or do you need to do more and more coats ? If so, how are additional coats applied? Same technique but over the tape now ? Thank you.

@Interior_Works

4 ай бұрын

Yes, just one more coat after the tape-cpat dries, just give it a light rough sand, then apply mud and flush over one more time, same technique, just without the roller. Also, I'm using an angle-head in the video, but a Flusher/Glazer will work the same way and is significantly cheaper.

Where is the next step pls?????

I keep thinking about getting some semi auto tools…. I’m a solo handyman taping a few rooms worth at most…..

R u in Canada?

Hi Brother...I would like to ask you which corner applicator is better 2 or 4 wheels...I ask bc u are using 2 wheels,so I am about to buy it it’s important to know your advice...Thank you very much 👊🏻👊🏻

@Interior_Works

4 жыл бұрын

I had the same question, and was advised to get the 2 wheel, because if a second pass was needed, the 2 wheel can do that better, but the 4 wheel messes up the first pass too much.

@nandosoares1686

4 жыл бұрын

Drywall Vids That’s good info also 2 wheel is Cheaper than the 4th,now about the tube which one u advise me Cam lock or the one you are using it on the video?👊🏻👊🏻

Great tools. Where would l find them

@stboost7160

3 жыл бұрын

I have the same exact setup it’s flawless and depending on where you are mate if you are in America or Canada I would recommend csr supplies and if in Europe I would recommend belmore/walls & ceilings

How many passes do you take before finishing??

@Interior_Works

4 жыл бұрын

One more pass with either a flusher/glazer or anglehead, preferably a larger size for the following finish coat.

You shouldn't have to push hard with a flusher at all.. very minimal pressure

Where can I buy it?

@rideauviewconstruction717

3 жыл бұрын

Try CRS building supplies, I have been happy with Columbia tools I bought from them.

Ove never seen anyone tape with a corner head

Silly question!!

Silly question...

I can only assume you prefer this way because you don't own a bazooka

@Interior_Works

4 жыл бұрын

I do have two, an old Columbia and the Predator carbon fiber, It depends on the type and size of the job also whether or not I have a helper with me. I also try different things to break the monotony

@keikeiasako

3 жыл бұрын

@@Interior_Works I'm sure you own every drywall tool known to man:)

@hurryout1

3 жыл бұрын

U wana sell that old Colombia?

Why don't you use fiber tape instead of the toilet paper? You save a step and its faster!

@taraty2635

2 жыл бұрын

Because when there is movement using fiber tape it cracks on top. If there is movement after you tape with paper it cracks behind the paper

@bluehashbluehash3099

Жыл бұрын

You can't use fiber tape on angles at all if you do your retard job will produce cracks lol

How barbaric of you

Once again over thined mud in use. Machines and their damn watered down mud. Quality finishing only comes from hand finishing with knife and pan.

@Interior_Works

Жыл бұрын

A number of times i've applied two small tapes, one with mud straight out of the box, and another with thinned mud. Then told my newest apprentice to remove the tapes the next day as part of a lesson. Always more difficult to remove the thinned mud tape, reason is the wet mud glue 100% saturated the tape and deeply into the drywall paper, fusing it all together, whereas the comparatively drier mud from the box only saturated and adhered to the surface fibers of both the tape and drywall.

@stevenminnerly5336

Жыл бұрын

@@Interior_Works The side of every can of mud says do not over thin

@Interior_Works

Жыл бұрын

@@stevenminnerly5336 my mud says this: "Remix contents before use. When taping and finishing joints, thinning with water may improve application. Add clean water in 250 mL (1 cup) increments, remix and trial-apply until preferred consistency is reached. Over-dilution causes abnormal shrinkage, poor bond and other negative effects. Do not mix with any other material." It's up to us and our own experience to find out what defines "over-dilution". I know what it is for me, and where the problems start. I've seen huge company crews thinning theirs down to a drinkable mix, and running it through their apla-tech hose line auto tools, or spraying the coats on with their Graco Mark X. I'd define that as over-dilution and asking for problems. What I'm using in the video is thick in comparison and the thinnest I'll ever use.

@Interior_Works

Жыл бұрын

@@stevenminnerly5336 maybe this will be a topic for a new video, I'll film an experiment I did years ago where I taped strips on a scrap drywall, incrementally thinning the mud down for each tape. I found the tapes that adhered less were the tapes from "straight out of the box mud" and the final tapes that were applied using mud that was thinned to like milk. The sweet spot was mud thinned to around what I'm using in the video. For applying tapes. My coating mud is way thicker, I can put my coating pan upsidedown and go for coffee and the mud will mostly stay put.

@lHiTMANll

Жыл бұрын

Lol you've clearly never done drywall and if you do, it probably looks like shit. There are 2 reasons to make taping mud thin like this. One, it shrinks behind the tape leaving you with room to coat over the tape without it being too humped up. The other reason is because the glue in the all purpose mud or taping mud(we don't have taping mud in the south) can saturate into the paper more creating a better bond. Obviously thinning it down to be like water will dilute it so much that you have more water than glue and it won't bond, but this clearly isn't to that point. If you're not taping with thinned down mud, then you're doing it wrong. And a combination of tool and hand finishing is far superior to only hand finishing. My dad started doing drywall in the late 70s and I've been doing it since I was a kid. I started out doing it by hand and quickly switched to boxes as soon as I saw how flawless they were. I like to do a final coat by hand for the angles though. It just makes them a lot cleaner and easier to sand. Also the angle roller is a complete game changer even if you don't want to use any other tools. You'll never get the tape as perfect as the angle roller can.