Well.... it's the official "mating day" today anyway ;)
@MrSnyper3605 жыл бұрын
The original FWD
@nissanpatrol8950
3 жыл бұрын
Isnt it 4wd tho?
@donaldellis3609 Жыл бұрын
The man with the twin massey 65 seems to be struggling a bit.
@torbenalstrup3902
6 ай бұрын
Yeah. It should actually be able to pull a 5 X 16 or even 18 incher without too much trouble. It may need more field weight on the front axle especially.
@craigalston2208 Жыл бұрын
Have you ever seen any of the rare 3 tractors joined together as a high horse power puller before the major manufacturers started manufacturing big 4wd tractors ? Need to get some footage of those tractors doing some field work too .
@iOWNaFERGUSON
Жыл бұрын
Nope. Where can i see that?
@craigalston2208
Жыл бұрын
@@iOWNaFERGUSON john deere 830 triple farm tractor and the international 660 triple farm tractor
@gerthezsgerthezs2136 ай бұрын
💯
@joescheller66802 ай бұрын
Apoears his lays are in need of replacing not going in ground very well. Maybe to dry also i guess
@joescheller6680
2 ай бұрын
Remember when i was a kid dad would take the lays to a black smith he would form a point on the leading edge of the lays to help it penetrate hard soils.
@russellclement20583 жыл бұрын
A mouldboard plough must be hard to pull because a MF 65 can pull a 4 furrow disc plough and a TE20 will pull a 2 furrow easy,,
@SK-tr9ii
11 ай бұрын
It's pulling hard because the plow isn't set up right. I don't think those guys are farmers.
@corydriver76344 жыл бұрын
Are these factory machines or are they two tractors fabricated together by the owners?
@bigredc222
3 жыл бұрын
They are homemade.
@TKM1951
2 жыл бұрын
If they are homemade ,I wonder why they are all matched Massey to Massey ,Ford to Ford I wonder is it gearing needs to be perfectly matched
@craigalston2208
Жыл бұрын
@@TKM1951 yes the gearing does need to be matched plus it's easier to get parts from 1 manufacturer rather than 2 different manufacturers if something needs replacing and to synchronize 2 of the same engines compared to trying to synchronize let's say a Canadian built gas Massey Harris to British built diesel Field Marshall . FYI there are also a few guys out there who joined 3 tractors together .
@jrufussimonsen4718
2 күн бұрын
@@bigredc222 No the BUKH is made this way from the factory.
@bigredc222
2 күн бұрын
@@jrufussimonsen4718 I've seen several of these type machines made from Farmalls and other American made tractors and they were all home made, I just assumed the BUKH was also home made.
Пікірлер: 21
You see something new every day!
Nice Tandem !
Well.... it's the official "mating day" today anyway ;)
The original FWD
@nissanpatrol8950
3 жыл бұрын
Isnt it 4wd tho?
The man with the twin massey 65 seems to be struggling a bit.
@torbenalstrup3902
6 ай бұрын
Yeah. It should actually be able to pull a 5 X 16 or even 18 incher without too much trouble. It may need more field weight on the front axle especially.
Have you ever seen any of the rare 3 tractors joined together as a high horse power puller before the major manufacturers started manufacturing big 4wd tractors ? Need to get some footage of those tractors doing some field work too .
@iOWNaFERGUSON
Жыл бұрын
Nope. Where can i see that?
@craigalston2208
Жыл бұрын
@@iOWNaFERGUSON john deere 830 triple farm tractor and the international 660 triple farm tractor
💯
Apoears his lays are in need of replacing not going in ground very well. Maybe to dry also i guess
@joescheller6680
2 ай бұрын
Remember when i was a kid dad would take the lays to a black smith he would form a point on the leading edge of the lays to help it penetrate hard soils.
A mouldboard plough must be hard to pull because a MF 65 can pull a 4 furrow disc plough and a TE20 will pull a 2 furrow easy,,
@SK-tr9ii
11 ай бұрын
It's pulling hard because the plow isn't set up right. I don't think those guys are farmers.
Are these factory machines or are they two tractors fabricated together by the owners?
@bigredc222
3 жыл бұрын
They are homemade.
@TKM1951
2 жыл бұрын
If they are homemade ,I wonder why they are all matched Massey to Massey ,Ford to Ford I wonder is it gearing needs to be perfectly matched
@craigalston2208
Жыл бұрын
@@TKM1951 yes the gearing does need to be matched plus it's easier to get parts from 1 manufacturer rather than 2 different manufacturers if something needs replacing and to synchronize 2 of the same engines compared to trying to synchronize let's say a Canadian built gas Massey Harris to British built diesel Field Marshall . FYI there are also a few guys out there who joined 3 tractors together .
@jrufussimonsen4718
2 күн бұрын
@@bigredc222 No the BUKH is made this way from the factory.
@bigredc222
2 күн бұрын
@@jrufussimonsen4718 I've seen several of these type machines made from Farmalls and other American made tractors and they were all home made, I just assumed the BUKH was also home made.