Tamiya TT02 vs TT02S - Test for Kev Talbot race
Автокөліктер мен көлік құралдары
How much quicker is the TT02S when compared with a box stock TT02. Do you really need hop ups????
Indoor carpet RC car racing is at its best when all cars are equal and driver ability is what determines the winner and not the guy with the deepest pockets
In this video Carl tests his “race winning” Tamiya TT02 in preparation for the 2nd KZread race.
But who will win on the big day? Will it be:
@PopalongRC ?
@RCKickschannel ?
@ClairesRCs ?
@KevinTalbotTV ?
@noahsrcs1808 ?
@Vinnyschannel or
@HardcoreRC ?
For a discount on all your Tamiya cars spares and hop ups at Rochester RC put in discount code PopalongRC at the checkout : rochesterrc.uk/link/popalongrc
Keep an eye out on the channel to find out!!
Пікірлер: 77
Grassroots club level stock racing. Love it. Needs to be more of it.
@PopalongRC
Жыл бұрын
Totally agree
Nice work. Really looking forward to the race.
@PopalongRC
Жыл бұрын
We are too … should make the podium at least
I’m impressed with how well your got round with a completely stock car! 👏🏻. Annoyingly the TT02’s do have a lot more slop than a TT01 out the box it can be sorted with a lot of shims though. My moneys on either of you two for the win 🏆
@PopalongRC
Жыл бұрын
Let’s hope so That’s if we don’t take each other out … we have done that before … hahaha
Great video Carl. Enjoyed the battles. I’ve definitely got loads of room for improvement! Thanks for the tips! Hopefully see you at MK in the next few weeks. Cheers Matt. 👍
@PopalongRC
Жыл бұрын
Cheers Matt See you on the track again soon
Lots of that steering slop is in the Tamiya box stock plastic servo saver. Thanks for the videos! Cheers!
@PopalongRC
Жыл бұрын
yeah not a lot we can do with that.
@countrymusic510
Жыл бұрын
@@PopalongRCsuperglue it, makes it solid but will still break free upon heavy impact 👍
Nice to see the TT02 on the track, first hop ups I did on my Subaru WRX STI Nürburgring was bearings then did the following hop ups - TBLE-04S, Diff locker in the rear gearbox, Speed gearing, Suspension arm balls (low friction), the CVA's, Steering, CVD's, Prop shaft, 13.5t brushless sensored set up and just upgraded the steering servo to a AGFRC 24kg digital servo.
@PopalongRC
Жыл бұрын
Wow you went to town on it … how does it handle the 13.5
@UKGtrotter2k
Жыл бұрын
@PopalongRC handles really good plus I also added blue alloy rims, a cockpit and running Tamiya On-Road Hard Tuned Spring Set (Soft - Front/Medium- Rear).
I have an original '02 type s and race it often. Really enjoy it. Solid chassis , some great hop ups in the box !
@PopalongRC
Жыл бұрын
Some of the SR I have seen look really nice long way from the stock tt02
@homelesszaya.6548
Жыл бұрын
@PopalongRC indeed , different arms , adjustable uppers , carbin composite dampner stays some aluminum, bearings etc the lot. Spot on chassis, locked diff up front and seems to enjoy the tracks.
Bought a TT02 last weekend, the Ford Mustang GT4 😎 It should arrive tomorrow 😄 Got some hopups as well, ball bearings of course, Tamiya oil shocks, alu drive shaft + the alu cups at both ends and the low friction balls for the front suspension… Also picked up a Tamiya tool set, so I have the proper fitting jis tools for assembly. Hopefully I’ll be able to drive it at a proper track some time.
@PopalongRC
Жыл бұрын
that is amazing, sounds like you are sorted. out the box it is not too bad to be fair.
Great to see the car so dialed out of the box ....Just goes to show how far you can take a "Stock" car without dumping money into hop ups ....like the box stock buggy your running... Have a good one 👍👍
@PopalongRC
Жыл бұрын
I like the challenge of getting basic cards around a track
@adrianharrison5208
5 ай бұрын
Looks like a great club to go racing with, I like the fact it's not expensive cars out on the track
Nice video👍
@PopalongRC
Жыл бұрын
Cheers Qrisem
Your car look very good on the track and your lines were very consistent. The TT02S is a completely different car. One of the features you can see in your video are the arms on the TT02S are more like the more expensive Tamiya road cars. The basic TT022 has a lot of slop in the front. I noticed when you compared slop in the front of the two cars, his servo saver was rock solid. Your servo arm or servo saver moved a lot. I have heard that some people add grease to the friction shock bodies to help the handling. I think your car will do very well. Good luck.
@PopalongRC
Жыл бұрын
lets hope it goes well next week
I would defo recommend an M07, so much fun and handles so well!!
@PopalongRC
Жыл бұрын
It is on the shopping list…
I believe the one equipped with the best high-grip wheel with a motor proficient in low-speed corning and acceleration will win. Servo or transmitter won't be a problem because I don't think they will pick a bad one :P
@PopalongRC
Жыл бұрын
Fortunately we all ran same tyres and motor so all good
@rayxxkaiser3586
Жыл бұрын
@@PopalongRC it sounds fair and good! ;)
Iv got 4 tt01s 2 tt02 ta01 ta02 and a tl01 I think the tamiya cars are just so versatile you can change what ever you whant like from rally chassis with a few mods or racing or just ripping round out side or 4w drift/power sliding or make it 2wd and make it I to a pretty good drifter well louds you can do 🤘
@PopalongRC
Жыл бұрын
Love how versatile the TT cars are especially when you consider the TT02B as well
if you are allowed to change that servo saver out for an aluminum servo horn that will help half of that slop in the front maybe more but rules might not allow for it in your club
@PopalongRC
Жыл бұрын
Club level it will be fine but for the KZread race is is out of the box build
You can see most of the steering slop is from the Tamiya servo saver. I expect you can't change it for the race but you can work on them to remove most of the slop.
@PopalongRC
Жыл бұрын
Yeah I might stick a different servo in it and see if that helps… maybe the servo save took a knock and worn some teeth
@techspeedrc
Жыл бұрын
Tamiya servo savers are useless for racing, while I've used Kimbrough savers for years if you want precision in a touring car there's nothing better than an Xray one even though it's blooming expensive!
Just a qwiq one though if your thinking about upgrading shocks don't make my mistake buying different shocks from all different makes the best ones iv seen that work the best for these tamiya chassis is by far the ya racing shock up grades I wast so much money getting different ones and should of just got them from the get go 👍
@PopalongRC
Жыл бұрын
Agreed Although I have multiple which I could put on without having to buy any
Who makes those colored shocks?
Hello i was just wondering do you guys have to set up the track every week you race? carpet and everything? do you think you could do a video on the process or maybe info on starting an indoor club etc. thank you David
@PopalongRC
Жыл бұрын
Yeah every club we visit we need to set up and pack down … we will see it we can sort something out video wise
If you slather the shafts of the "shock" bodies with Tamiya Anti-Wear Grease, it acts like a damping, and gets rid of nearly all of the bouncing. Remove the spacer on the shocks as well to give you some droop.
@PopalongRC
Жыл бұрын
That will only cost about £100 in AW grease …. Has to be one of the most expensive greases we have ever brought
@knappRC
Жыл бұрын
@@PopalongRC Hehehe agreed!
2:48 How much movement is there if the servo arm isn't moving? I only upgraded my steering with the two low friction screws and some cellotape around the screws where there was slop and it is a lot better now without spending a ton of money!
@PopalongRC
Жыл бұрын
I have replaced the servo
When you take price in to account like most have to that bog stock TT-02 combined with your driving did well to my amateur eyes,just a shame about the stock pogo stick shocks!
@PopalongRC
Жыл бұрын
There is a simple fix which I will explore after the KZread race
Im surprised Kevin didn't go full send a d launch it off of a 12 foot ramp.
@PopalongRC
5 ай бұрын
Maybe at the next KZread race
Just Subscribed at least you practiced.
@PopalongRC
Жыл бұрын
Cheers for the sub Enjoy the channel
Are both of you running brushed setups in all the TT02’s you got, picked up a TT02r to replicate the Astra but wondering what electrics to put in it 👍🏻
@PopalongRC
Жыл бұрын
Totally stock mate, I’m not sure that putting a fast brushless system in this car will be any benefit to be honest. Maybe a 21.5
Tt-02 S, with TRF416 suspension parts, is noticably better than the normal TT-02, should show up in lap consistency. The SR can almost hang with competition touring cars, so its quite decent. As long as you all run the same cars, without any odd modifications, I think the youtuber race should be epic, and could make for a fun tradition even. Stock cars are just as fun to race as the higher end cars, its more a question of do you want to race with just driving skills, or driving+tuning+pitcrew+money. I love the truck class because its simple and cheap. Try messing about with the shock angle options(even if they are few) might find a bit more favorable characteristics that way.
@PopalongRC
Жыл бұрын
they do run a lot smoother and depending on the track they can hang with the faster chassis
You must be using contact adhesive on the tyres
@PopalongRC
Жыл бұрын
Additive on rear only….
What has happened to the Carten FWD for the national?
@PopalongRC
Жыл бұрын
I ran it at the last round and it was amazing… made the A final… it is one one our favourite cars. Such a pleasure to drive …
You have them go against the r version srx version.
@PopalongRC
Жыл бұрын
just a practice run. our main race will be all stock
looks like most of the steering slop comes from your servo
@PopalongRC
Жыл бұрын
Yeah I might change the servo .. it is too loose for my liking
Wasn't Gavin here not too long ago?
@PopalongRC
Жыл бұрын
dont think Gavin has been to this club,,, he has been invited so maybe we can get him there soon.
You know I hate to say it … so I won’t 😁😂🍻🍻🍻
@PopalongRC
Жыл бұрын
Ok
Primo
@PopalongRC
Жыл бұрын
Cheers
Dude, your channel, which I’m really not interested in keeps coming up cause u using kevin talbots name. Ummm.. I’m sure u enjoying the views you get by doing this but can u be original and not do it anymore.. be unique my friend. Just saying.. the fact that u also putting his face in the snapshot to attract more click bait shows u being intentional
@PopalongRC
6 ай бұрын
Have no idea what you are on about me old fruit, apparently it also makes people comment🤷♂️
I would never buy any kind of Tamiya for racing, they are simply not good enough compared to Xray, Awesomatix, Mugen ect ect, the Price ofc goes way up.
@PopalongRC
Жыл бұрын
Anything is good enough for racing just as long as everyone is racing the same car and electrics👍 the issue with running high end cars is that it’s normally the person with the deepest pockets will take the win in most cases.
@calvinl5726
4 ай бұрын
L mugen