I built the 3348 6x4 tipper a few months ago. That's the longest kit I have ever built. I'm glad to hear you say it's taking you longer than you thought. I do love my dump truck though.

Bob... Watching this one more time before starting my 4151. Wanted to let you know that my Wife picked the color... SAME AS YOURS! She saw it and said YES! 😊

@HobbyconceptsLLC

2 жыл бұрын

Ha! I was not sure about the color myself until I painted it and then loved it!

@CarminesRCTipsandTricks

2 жыл бұрын

@@HobbyconceptsLLC It is awesome! I'll try not to carbon copy yours, with some slight variations...

Looks awesome, love the color green and love the paint job for the truck. Love the build!

Very nice looking truck! Never thought I would be interested in these, but the more I watch the more I want to build one!

@TheRoadTaken

2 жыл бұрын

My sentiments exactly!

I think that green really works, really pops.

Man I wish I could afford a semi truck kit, they look so cool and look like alot of fun to build

Fantastic job! Truck looks great! Looks like it would hurt my brain though…. I do not have near the patience you have. Thanks for the video!

I really like your build videos Bob! Thanks for sharing how to install the MFC-03 while retaining the dashboard. You mentioned that you had to remove part of the gear box cover, but I think you did not show the revised version. Anyways, I'll try to figure it out when I reach that step. Great tip too, on mounting a smaller speaker on the truck ceiling. I love the color of your truck, and excellent tip on the step board to the front bumper!

Love the color scheme. Incredible hulk👍

Thanks for the ideas of the screw on steps. Cause mine have broke off a few times being glued

ANOTHER MASTERPIECE…. NICE BUILD BOB. 🤙🤙🤙🤙🤙

You do excellent work...love what you did with the speaker....your add on are genius.

Looks great, I found that Servonaut do a great low profile speaker that sounds really good, nice tip screwing the steps on, I fitted the MFC and full interior, bit tight but can be done, just a suggestion, put the roof lights on the main (high) beam setting, you can switch them independently then

That looks great !!! Beautiful.

Awesome truck Bob. Love the color too. That was a great idea with the speaker mounting and the blue dash lighting on it. I may use a lighted dash on my next project. I'm really starting to like the mfc03 also. More options on it it seems.

@TheRoadTaken

2 жыл бұрын

The dash lighting was incredible imo.

Your attention to detail is always impressive. I do wonder why the off road lights on top of the cab come on first, I would think they would come on last. The slots for zip ties and a better set of drive tires are a nice touch; and I agree should be updated in all the truck kits.

@HobbyconceptsLLC

3 жыл бұрын

You can plug in the top lights to a different slot on the MFC to make them come on in a different order.

Beautiful truck as always sir! I love all your videos!

Beautiful friends😚😚 thank you for sharing video

Amazing nice truck 🚛 good job and work 💪👍👏

I painted the Lightbuchets silver . That looks a lot better than the black inside. Btw.Nice Channel

I gotta agree Bob... Beautiful Truck!! Awesome color choice too. 👍👍 Really liked the solutions to the MFC and Speaker mounting! It even looks like you could get TWO of those Beier Speakers up there, wired in Series (if 4 ohms would overload the Amp), for slightly better low tones. Either way, great idea!! A Thank You! You've inspired my Grand Hauler Dashboard. I cut behind the Gauges and backlit with LEDs. 😁 Glad all is OK!!👌 I was actually worried because I hadn't heard anything for a while. You were just BUSY! Listen, I've got a pretty big Order in your Store's Shopping cart, that within the next 5 days, I'm pulling the trigger on. 😲😁😁 I hope you're able to SHIP quickly, because I've waited literally DECADES to do this! I'm excited 😁

@CarminesRCTipsandTricks

3 жыл бұрын

One question.... For now! Can a MFC-03 be used with an external ESC?? I've enjoyed the low speed smoothness and FULL Lipo Compatibility with Hobbywing ESCs, and intend to keep them. In fact, I've got a Hobbywing WP1060 ESC mounted neatly into the STEP of my Grand Hauler!! .... That will be my final determining factor between the MFC or Beier.

@HobbyconceptsLLC

3 жыл бұрын

No. If you want to use a different ESC just use the Beier USM-RC-2. Less money than the Tamiya MFC, much smaller and has way more features. hobbyconcepts.net/products/beier-sound-module-usm-rc-2?_pos=1&_sid=0dacc0979&_ss=r

@CarminesRCTipsandTricks

3 жыл бұрын

@@HobbyconceptsLLC OK... I'm sold on the Beier!

@CarminesRCTipsandTricks

3 жыл бұрын

@@HobbyconceptsLLC Bob.... I'm still waiting on getting a Computer. How much would you charge me to add just basic Cummins or CAT Diesel Engine starting, Idle and running Sounds, just to get me started with the Beier USM-2?? You can use files you've already made for simplicity.

Beautiful Truck !!!

Hi Bob. Thanks very much not just for this video but all your superb videos. I have the Scania R620 and having been trying to figure out how mount the MFC03 and the interior instead of blacking out the windows. We love all your videos as being a first time truck builder the tips you give out are awesome. Keep up the great work.

This is a great video 👍

Coffee cup for sure!

Very nice truck 👍🏻 I like your channel

I recently built an arocs and man its so fragile.. i hate that such large body parts are held in with superglue. great solution to the problem.

Bravissimo 👍 👋🤝❤️😎

Cool

Year cool 😎 I well do one only with your help Lee

Whoa!!! Just straight out wooooow!!! Now, I'd like to purchase the truck for $9.99 with FREE SHIPPING and I'll give up an additional $5 for the radio.. It'd be a nice gift!!! Make it happen pal

Wow

Awesome video, thank you for sharing. Are you going to include the dump actuator in this build? I've ordered my kit from you and should have it delivered by tomorrow. I'm very excited.

@HobbyconceptsLLC

3 жыл бұрын

Yes. Dump bed and actuator in part 2.

@robertblack7352

3 жыл бұрын

@@HobbyconceptsLLC Good News, I just received my kit from you today, on time. Thank you so much. I'll be looking into getting the controller probably from you. I've already ordered the MFC3 and Actuator from Hong Kong a few months ago, they should be arriving soon.

Thanks for doing all these videos. You have helped me improve my RC building skill in so many ways. One question: Would it be possible to put a roll on/off system on this truck?

@standrew421

3 жыл бұрын

Nice looking truck

@HobbyconceptsLLC

3 жыл бұрын

You will love an upcoming video I am doing. Stay tuned for sure!

Does everything come together? or you have to buy other 3 part like remote......

Nice build. I suspect the steering would bend if you use it with a heavy load in dirt road situations. Love the dash install. How is the Visaton speaker with regards to sound quality vs the Tamiya speaker? Would be cool to mount the Tamiya M.A.N. TGX 26.540 cab or the old Volvo FH-12 on a chassis like this.

@HobbyconceptsLLC

3 жыл бұрын

The speaker sounds as good (if not better) than the Tamiya speaker.

@t.w.3

3 жыл бұрын

@@HobbyconceptsLLC Thanks for the reply. I have a few rc tanks, and have good experience swapping out the included kit speakers with Visaton or others with custom built boxes.

@rodneycoutman7918

3 жыл бұрын

That little speaker you swapped over from large one where am I buy that from please sir

Hi was wondering if could tell me the measurement from the back of the cab to the end of the chassis frame rails at the rear Many thanks

Hi, really nice video and the truck is awesome. I can't find Part 2, could you please tell me, where can I watch it

@HobbyconceptsLLC

3 жыл бұрын

Not up yet - coming soon!

👌👍

mine have Cogging and Start Up Hesitation it normal for 35t motor ?

so you use thin ore foam like D sided tape to side parts ( side fenders) ? I'm doing the Actros - 3363 and same there, they tell you to glue.

@HobbyconceptsLLC

2 жыл бұрын

I use the thin double side tape.

Hey Bob. Awesome build. Did you not show installing the vibration unit or did you leave it off this build?

@HobbyconceptsLLC

3 жыл бұрын

I did leave it off.

Good jop

😍❤🔥👌👍

i put m.f.c in the roof bob. easy outa the place spot.

Super awesome video love the way that it was edited the instructions and play-by-play was awesome very good video. I am totally unfamiliar with hobby Concepts which I'm going to investigate further and to subscribe are you mostly into trucks into the larger models I'm hoping you do off-road trucks and tractors also I'm very interested in that. When I retired I bought some of these larger models and then my eyesight went and they are very difficult now to try and put together not alone keep track of the parts so I did enjoy your video very much and thank you and looking back into the past of your Channel and seeing what I have missed out on. )-]-@#=]

@HobbyconceptsLLC

2 жыл бұрын

Thank you very much for the nice comments. Glad you enjoyed the video!

' try take off the cap from the head and let coool head plus see better vision with light

How did you wire the top lights in the cab did you drill any extra holes

@HobbyconceptsLLC

2 жыл бұрын

There are some small areas in the cab top that are molded thinner you cut out.

Is it possible to convert that into a regular semi with the 8x8 configuration for the wheels

@HobbyconceptsLLC

2 жыл бұрын

Anything is possible with enough work!

Hello Bob, my most sincere congratulations for your teachings. Question with what you activate the servo in this video? I think it's great not to use the radio for these tests.

@HobbyconceptsLLC

Жыл бұрын

It's a small servo tester. Very handy thing. hobbyconcepts.net/products/servo-tester?_pos=1&_sid=d574c1865&_ss=r

@mauriciocanepa1669

Жыл бұрын

@@HobbyconceptsLLC Mil gracias , desde Chile, Mauricio Canepa B

Hi Bob just watching your video and wondering why people do not wrap the wires with black insolation tape it looks a lot better than seeing all the coloured wires...Mike

@HobbyconceptsLLC

Жыл бұрын

I like the black spiral wrap. Easy to use and allows for wires in/out anywhere. hobbyconcepts.net/products/spiral-wire-wrap-1-4-x-2?_pos=1&_sid=5e6fc542f&_ss=r

Hi Bob can I ask what colour paint you used on this build, I'm just about to build a Knight Hauler and I think it would look amazing in that green.

@HobbyconceptsLLC

3 жыл бұрын

Tamiya TS-52 Candy Line Green

@mattbaker888

3 жыл бұрын

@@HobbyconceptsLLC thank you, keep up the awesome videos.

QUESTION ? I HAVE MFC 01 WILL THAT WORK? OR 03 NEEDED ? USING DX6E TRANSMITTER FROM AMAZON THANK YOU KEITH MCCLAIN NYC

@HobbyconceptsLLC

3 жыл бұрын

The MFC 01 will work fine. It only has one reverse light so I would add an led there and add change the 5mm taillights to 4 - 3mm led's like I did with the MFC-03 and change the rear flashers to 3mm led's.

Hello.. Just want know which type of the speaker you use..?

@HobbyconceptsLLC

3 жыл бұрын

I used the small Beier speaker.

@teeyungfan4654

3 жыл бұрын

@@HobbyconceptsLLC can let me know where can buy the speaker or the model of the speaker...? Thanks

hello sorry for ask but how many tamiya 100ml can for paint 1 cab truck ?

@HobbyconceptsLLC

15 күн бұрын

Usually 2 cans.

@silingkhoy6673

15 күн бұрын

@@HobbyconceptsLLC Thank you

Where the **** is aa5 for?

Do you think someone who has never built an RC model could be successful at building this kit, specifically the mechanical part. I'm confident/proficient with electronics.

@HobbyconceptsLLC

2 жыл бұрын

Yes. Tamiya kits and instructions are always first class and pretty straightforward. A few of ny videos (like building the transmission) are also helpful.

@TheRoadTaken

2 жыл бұрын

​@@HobbyconceptsLLC Thank you for the confirmation. I'm itching to get started! If I may ask another question, I already have a 6 channel controller (Radiolink RC6GS V2 6 Channels) which is not a stick controller. Can I use this to drive a Tamiya truck or is a stick controller a requirement?

I like the idea about screwing the front sides on.but 2.5mm countersunk colour coded might look better. Screws are big, ugly and spoil the scale look.

😉👍👍👍💯

💸💸💸💸💸💸💸

All this wiring gives me anxiety and I’m not the one wiring.

@HobbyconceptsLLC

3 жыл бұрын

Ha!

sweet video but Hercules trucks go together better then tamiya. you glue on the front bumper bits with glue. i screw them in that the difference in Tamiya crap. and the real trucks Hercules hobby trucks . ways better. good job bob