Just found you a couple of days ago, now I'm watching everything you have!

@lpjmodels

9 ай бұрын

Thankyou Joe

The Devil is in the Details and you seem to know Old Scratch well! Patience has yielded Beautiful Results!

@lpjmodels

2 жыл бұрын

Very kind words thankyou !

I've watched a lot of scale model videos and channels, but this is probably my favorite. Great production value, great explanations, and the quiet music in the back all make for a great experience. Thank you for doing what you do!

@lpjmodels

2 жыл бұрын

Thankyou for the support Andrew ! I have been trying hard to do the best I can, sometimes it doesn't work but I'll keep plugging away

"There are no mistakes. Only Happy Accidents." - Bob Ross Great build. The use of VMS products is especially appreciated. I learned a lot. The "captured" version is very clever. Many thanks.

Another classy model from the meister and another mesmerising 40 minutes of modelling joy. Well worth the wait. 👏

@lpjmodels

2 жыл бұрын

Thanks so much Fus !

Another high quality video production ...just bought this kit for $14 USD ......a very helpful guide!

Cool build, of all the marder variants I see III the least. Always nice to see a more obscure tank.

@lpjmodels

2 жыл бұрын

It's definately underrepresented, it looks derpy, but it's quite charming in a way

@hailstormrising1634

2 жыл бұрын

@@lpjmodelsIndeed

I really like those self-propelled guns and you really nailed it. And I definitely feel your pain on aftermarket parts blowing up the project costs :D Anyway, keep on the great work!

@lpjmodels

2 жыл бұрын

Thanks Alleyman ! It was worth the extra I think. The OG kit only came with rubber bands

I like how it's just moderately weathered and beaten up - great job!!! Chris

@lpjmodels

2 жыл бұрын

Thanks Chris !

The tracks might be expensive but they are so worth it, they look fantastic. Great job on the model and the paint job! And the "accident" with the paint flake? I would have left it, looked the tank hit a large branch of a tree or something. You fixed it perfectly though. 👍

@lpjmodels

2 жыл бұрын

Thanks Al ! A lot of folks are saying I should have left the chip

That turned out a stunning master piece, well done mate.

I really love your painting, it's so clean. Very nice job :D

Hello mr.lpj!nice job done.great 2c u unleash your cteative powers.thank u4 delivering fun excitenes and knowledge and Inspiration.your passion in detail and accuracy is an inspiring shiny beacon in the modelling world.i would like to give more than 1thumb up.but I cant.thats a pain in the ass.because u deserve it.thank you for sharing.with best regards and sticky greetings from sandy Brandenburg/germany.your modellmate.christian

Nailed the camo and weathering. Very nice build.

@lpjmodels

2 жыл бұрын

Thanks Paul !

Extremely well done, looks great!!

@lpjmodels

2 жыл бұрын

Thanks John

This turned out so amazing James! Great narration and tips as always. Cheers!

@lpjmodels

2 жыл бұрын

thanks Mate !!

Amazing build James !!! I love the camo skin !!

@lpjmodels

2 жыл бұрын

Thanks Joaquim! One of my favorite camo schemes. I really want to do one over heavy modulation.

Probably one of the best builds I’ve seen. Nice job. Thanks

@lpjmodels

2 жыл бұрын

That's very kind Pete thankyou !

I love everything about the build, especially the hand painted markings!! They are awesome!!

@lpjmodels

2 жыл бұрын

Thanks Johnny !

Outstanding work.

@lpjmodels

2 жыл бұрын

Thanks Jose 😀

I love the honesty in your build videos. By that I mean any mistakes or hiccups are left in and not consigned to the cutting room floor. Instead you show us how you rectified the problem. We all make mistakes or have problems with the build but you don't get to see many of them in other YT videos. Well done James. A classic build as always. Stay safe mate.

@lpjmodels

2 жыл бұрын

Thanks Ferb ! I'm trying to include the derpy moments more now, I think it is more real ! Like you say , and they are missing from a lot of other videos. Also fixing the problems is something I wish I knew how to do when I started . Take care mate

Great skill, James! Glad to have stumbled upon your channel. I’m gonna learn a lot from you. I’m trying to go back to scale modeling, I stopped in ‘05, hoping to enjoy the hobby I loved when I was a teen in the ‘90s!

Wow great build sir!!!!

Fantastic video my friend looks amazing the chipping came out great just the right amount great job on the free hand markings thanks for sharing 👍

@lpjmodels

2 жыл бұрын

Thanks Rims much appreciated mate

Super! Ein sehr schönes Modell! Danke 👍🏻

Superb. I could never have done the star free hand as well as you, but thanks to you my mud is getting much better!

@lpjmodels

2 жыл бұрын

Thanks Robert ! The key with these markings is not to be so neat, it's hard to let go and slap it on though

absolutely beautiful

Great work on the kit.

@lpjmodels

2 жыл бұрын

Thankyou Michael

Lovely mate!

A beautiful job James! I have had this kit in my stash for quite a while now, and you have inspired me to finally build it. I really like the German SPG’s, and this is a fine example. Keep up the great work, and cheers from Australia!

@lpjmodels

2 жыл бұрын

Thanks Gary ! I have wanted to do something German and a while now, and everyone does a tiger, these vehicles especially spgs are way more fun ( especially those based on the 38 chassis always look bodged together and overall more interesting)

Great build mate 10/10 and I especially like how neatly the words looked

@lpjmodels

2 жыл бұрын

Thankyou mate ! I'm glad it came out ok 😀

@omerashraf9357

2 жыл бұрын

@@lpjmodels bro can you build the new airfix spitifre mk xviii in the indian scheme and www.specialhobby.info/2021/03/sh48214-tempest-mkii-in-148-colour.html and www.scalemates.com/kits/takom-2070-m47-g-patton--1029663 in pakistani schemes ?

Another great build mate, well done!

@lpjmodels

2 жыл бұрын

Thanks a lot Jason 😀

Beauty. You do fine work, mate.

@lpjmodels

2 жыл бұрын

Thanks John !

Excellent build, James 😊👍

@lpjmodels

2 жыл бұрын

Thanks so much mate !

Fantastic looks great

Stuff like this is why I’m a Patreon. Your work is some of the best on KZread. Bravo, Sir 🍺👍

@lpjmodels

2 жыл бұрын

Thankyou my freind ! I'm glad you're on board and I'm stoked you're still enjoying the work !

Magnifique gros coup de coeur pour ce modèle !

@lpjmodels

2 жыл бұрын

Merci Friterie !

Damn, good job keeping up with the weekly uploads.

@lpjmodels

2 жыл бұрын

Thanks man ! I'll be struggling with the next one I won't lie 😄

I think your work is stunning. I have always wanted to try the Metal Track and Pin thing..! But fear I've Missed my Window. Now 67yrs and with rather an Alarming Tremor, so some days I can model, Somedays 'Forget it..!' Those pins, even Pre Cut would go everywhere. 'Orbit' not being Beyond the Realms of Possibility..!🤣 But I can Still model just not too Ambitious. Currently building the 1/35 Zvezda Sd.kfz 184. Not bad kit at all. Zvezda have improved somewhat...! Yay..!🤩 I'm normally 'Tamiya' if Possible..! Great video and even better tips..!! Thank you..! Cheers kim in Oz. 😎

Great build 👍

@lpjmodels

2 жыл бұрын

Thanks a lot Dave

my god man WHAT A JOB !!!!!!

another masterpiece mate. Well done

@lpjmodels

2 жыл бұрын

Cheers mate

Great vid Great build!!

@lpjmodels

2 жыл бұрын

Thanks my freind 😀

That mistake sure looked good! I would of kept it lol. Came out amazing sir great job!

@lpjmodels

2 жыл бұрын

Thanks a jeff, there wasn't such a ding on the referenced unfortunately

Looks like you're beautiful tamyia build . Quite different from the dragon kit with its 100s of parts . Nice job thanks for sharing.

On scalemates there's an new aftermarket option for the covers to fit over them empty shell Racks! There really nice would make all the difference I'll leave the link but KZread normally removes Amy links now outside KZread! I've had to repost this it.got deleted straight away the make says K59 in shell ammobox upgrade set for Tamiya marder 3 C-026 Detail set 2021! Hope this helps even take the lids looks easy enough to still be able to slip em on!

@lpjmodels

2 жыл бұрын

Thanks Charlie ! I wondered why there was a missing post.. they look really nice

Beautiful build mate, can't fault a thing👍😉😁

@lpjmodels

2 жыл бұрын

Thanks Dave ! Good to hear from you my freind :)

I really liked the level of chipping on this, just enough for visual interest and realism I felt. I do love a heavily chipped AFV sometimes (if it's done really well) but a part of me always knows it can't be realistic. Speaking of realism, the unusually large chip? I would have left it myself. I think it looked really interesting! I immediately though it made a great starting point for authentic-looking damage created e.g. when the vehicle scraped against masonry. A core of exposed steel, just the merest hint of rust and _bingo_ a Bob Ross happy accident 🙂

@lpjmodels

2 жыл бұрын

Thanks mate ! I love the heavily weathered look but always chicken out for a more refined look 😋. Unfortunately there was a decent photo of that particular area and it was nice and tidy there

Neva done a tank model but i got a few on list to order. nice work🤙

@lpjmodels

10 ай бұрын

Thanks for coming over and having a look !

Good job.

@lpjmodels

2 жыл бұрын

Cheers CemAA 🍻

Looken good!!

@lpjmodels

2 жыл бұрын

Cheers Paul thanks for watching

Beautiful build, though I think I'm going to have to grab one of my kids to do the tracks for me. The eyes are not what they used to be, lol. I will be using some of the techniques you have demonstrated, thank you.

@lpjmodels

2 жыл бұрын

Thanks Wade !

Very Nice.

@lpjmodels

2 жыл бұрын

Thanks !

Nice build, never did a captured version, not my thing... But this is your build so well done.

@lpjmodels

2 жыл бұрын

Thanks John. I like nonstandard things, makes it stand apart a bit.

Great work. Looks used and grubby but not chipped to death which you so often see these days, and which is so unrealistic. I certainly couldn't afford to double the price of a kit with metal tracks, or be bothered with all the extra work, but fortunately Tamiya now supply very neat link and length tracks in some of their new AFVs, including their latest Marder (a different version to this one) which I think are perfect for ease of building and realism. I'm hoping they include them in a future release of this particular kit as it's an interesting vehicle. Anyway, top marks for another superb build and - just as important - a nice relaxing watch!

@lpjmodels

2 жыл бұрын

Thanks Ian ! I don't mind paying out the extra, its either that or buy another kit.. and I'd rather add to a project than add another project . But everyone's different mind. I won't do it for everything, but those rubber bands had to go.

Vallejos crushed grass and crushed grass n mud effects are good from there environmental range! It looks more realistic than mixing static grass through Ammos splashes mine never looked quite right when mixed mine!

@lpjmodels

2 жыл бұрын

Just added that to my list it looks great thanks !

James , my man Great build . The way you bring /paint life & realism in these models is unreal. Great work. As far as the scratch goes , was that due to some oils or residue on the model or was it just scratch that grew larger when you prepped it for repair. Plz keep sharing your work with us Cheers from the states

@lpjmodels

2 жыл бұрын

Thanks Mikel ! The scratch happened because I was more interested at the time in the podcast I was listening to and pushed wayyy too hard.

There is PE available for the ammunitionracks by Part (P35-053).

Hi James! I really don´t like this version of Marder but you have done nice job. Building models based on photos is what I really like to see.

@lpjmodels

2 жыл бұрын

Thanks Mikulas ! I know what you mean !

As always you rock :)

Thanks, James....another stunner! A surprise ending with displaying a captured vehicle and a tantalising future episode 'watch this space'! You managed the correction of the small blunder really well....plus giving us tips re fixing the issue. Just wondering....do you ever have disastrous, can't be fixed builds??

@lpjmodels

2 жыл бұрын

Hi mate ! Well... I was building an airfix handely page hp42 and that was well beyond my remit. I'm not great with scratch or major fixes, they never end up looking right and on this the struts were ill fitting and poorly aligned. That was the only thing really since the start of the channel that I haven't really finished. Quite often to get a video out it needs to very something I know I can do, otherwise the gaps between videos would be too long 😀

@robbo1068

2 жыл бұрын

@@lpjmodels As a kid, my friend built the HP42 kit back in the 1970s (yeah, I'm that old!) and it turned out ok. I guess that near enough was good enough back then so when things don't go to plan nowadays it becomes quite frustrating when kits don't do as they're supposed to. Makes me feel a little better knowing that even the best YT modellers have their failures. Wise suggestion....pick kits that you know you can do!👍👏

Fantastic build and video, thanks! For this Marder's 76.2mm gun you can use standard German 75mm Pak 40 ammunition. The only difference was the diameter of the driving band, and 1.2mm won't make any difference in 1/35 scale.

@lpjmodels

2 жыл бұрын

Thanks ! I wasn't sure and now I know

I got a Dragon kit the Grille with sig33 it's got all the spare parts For these kit's including the ammo racks amd ammo! I'm using them in my Tamiya marder when get round to it!

For these tracks I would use Albion Alloys straight brass wire.

Nice one there James, Although I'm surprised you went with the older release rather than the more modern one with the length and link tracks and nice figures, i'm guessing its either been in the stash for a while or you picked it up for a good price. I hope you decide to do the Marder I and Wespe at some stage.

@lpjmodels

2 жыл бұрын

Hey Kiwiruna thankyou ! I wasn't aware of the other release to be honest. It was an Impulse buy at my local shop 😁

Hi James, Sorry stuck my head in the chat in the premiere and then didn't say anymore. We manage the the block of flats where I live ourselves and I am one of the directors, sounds very grand lol. One of the flat is being sold and the solicitors are asking for a sellers pack and we are trying to put it together and a few emails that needed answering arrived and spoilt things. Also sorting out where my son has to go for his first aid course to do with his DoE tomorrow. I nice start to a relaxing weekend. Hope you are both well. Cheers, Mark

@lpjmodels

2 жыл бұрын

Hi Mark no worries glad you popped in for a bit ! We all have things to do sometimes. All good on this end hope its the same on yours. Best of luck to your son on the course ! It'll be a breeze. All the best James

@markburgess4528

2 жыл бұрын

@@lpjmodels I'll try watching it again tomorrow evening.

great

How do you make the sprue goo? I find your videos very helpful with my builds, and really enjoy watching your techniques.

Does the vms black track pro work with plastic tracks or just metal ones. Fantastic build by the way

Lovely as always. I have found AK and Ammo chipping fluids hit and miss on some of my past projects. How would you rate the VMS chipping fluid by comparison?

@lpjmodels

2 жыл бұрын

I found so far it easier to use. The first point Is the surface tension isn't quite so bad. But it is still a bit of a dark art. I havent tried it with straight tamiya properly yet but i bet it slaps.

Another trick for the 2 piece gun barrels, is take a.010 mm piece of plastic and glue it in one side then attach barrel together and cut, sand, and flush it all together.

@lpjmodels

2 жыл бұрын

That's a cool tip Rick thanks !

nice job the Marder series are some of my fav TD's , i refuse to buy after market parts the kits are to expensive already and the only thing i buy for modeling besides the kits are reference material books by Stackpole and many others.

@lpjmodels

2 жыл бұрын

Thanks ! I don't mind putting extra in. The way I see it is I'd rather have a kit with extras that I'm going to build than 5 kits in the stash that I'll forget about

Hi James....quick question. Do U use a magnifying glass when painting fine details? as I myself am finding it hard for my eyes to focus on such small parts to paint. Also heard you on the Plastic posse podcast n had to check you out. Your tutorials are excellent. I've only just gotten back into modelling thanks to watching the Fury movie....n yes I'm doing a Fury build. Anyways many thanks for the informative videos U put out. From Australia. (This was spose to b a short comment...sorry)

@lpjmodels

2 жыл бұрын

Hi MG ! No I don't, well not yet anyway.. I'm finding it harder to film and model well at the same time and it's due to my eyesight getting slightly worse. Thanks for coming over and having a look ! It's much appreciated

Overall a great build and finish James. The only thing I would have done different is add tool clamps to the tools and maybe pushed the weathering on the lower hull a bit further... but that's just me. I hate to be that guy but... I think you forgot to paint the bow machine gun.😬 Other than those minor things it turned out awesome. Looking forward to the display with figures. Cheers!

@lpjmodels

2 жыл бұрын

thanks Scott mate ! ( whooops on the Bow MG... will fix for the dio)

@SmallSoldier

2 жыл бұрын

@@lpjmodels lol.. I know you will.

James great stuff, please can I ask why you didn't paint the presumed MG34 and why it was left in Desert colour ... not gun metal ?

@lpjmodels

2 жыл бұрын

Thanks Steve! Pure forgetfulness I'll fix it for the dio !

Fantastic bit of modelling, What airbrush kit do you use and compressor? would like to know what would be best for modelling as I'm only just getting back into it after 40 years :) Many thanks

@lpjmodels

2 жыл бұрын

Hi Phil thankyou. Sorry for the late reply. I use a h&s infinity cr with a 0.15 needle and nozzle ( one of the finest sizes you can get) My compressor is a sparmax tc-610 h ( or very similar ) It's about 450 for the complete set up that I use, I used an iwata sprint jet to start with, had that for 2 years and it started overheating from use, if you're going to be spraying a lot, get one with a tank. If not a constant one is fine despite what folks say. Airbrushes are very personal, I found the spares for h&s very affordable compared to iwata so I shifted over a few years ago, haven't looked back :)

@phil_the_brit

2 жыл бұрын

@@lpjmodels Thanks for the reply, brilliant, I'll look into getting one of those

I was thinking you maybe had a problem with the paint peeling away because of the mix, however I read that AK Real Color and MRP are both acrylic suspended in a lacquer mix or vice-versa. Tamiya XF is aycrlic in alcohol. Mr Hobby Aqueous is the same. I guess they're all interchangeable.

@lpjmodels

2 жыл бұрын

Hi mate, it was 100% a scrape, the finish is really tough. I caught the end of what I was using to chip in the paint because at that particular moment I was being a bit too vigorous and got distracted. 😀 I used to have adhesion issues several years ago, lots of paint peeling with tape e.t.c but I ironed that out. Aha paint chemistry my favorite! Ak real colour started as a formula similar to tamiya but somewhere along the line the recipie was changed and now its pretty much a pure laquer. Standard mrp is pure laquer, but they have a water based version for touch ups. Sprue cutters union podcast have a few episodes where they go into the bear bones of the subject, the problem is paint companies aren't always transparent with their information. It's an interesting subject !

Well, K59 Productions has these ammo bins you've been looking for. They although had an upgrade set for the Tamiya too but not available at the moment.

@lpjmodels

2 жыл бұрын

Thanks for the heads up. It's a shame they didn't show up on scalemates

@Bigman0468

2 жыл бұрын

@@lpjmodels they do show up on Scalemates🙃

@lpjmodels

2 жыл бұрын

@@Bigman0468 damn they sailed right past me then !

@Bigman0468

2 жыл бұрын

@@lpjmodels no problem, sometimes this happens😉

Hi, I've never seen the big white USA star hand painted & the a Balkan cruz crossed out. Was this a captured tank ? Cheers, always fun videos!

@lpjmodels

2 жыл бұрын

Hi man. Towards the end there are some reference photos. It was captured by soviet forces jn 1944

Always wanted to build this model. The problem is that i have something like 80+ kits in my stash to finish 🙈 is this problem common? :D great build by the way!

👍👍👍

@lpjmodels

2 жыл бұрын

😀

The fact that the ammo compartment is empty just kills it for me. The new marder 1 they made has a few though. Just an immersion killer for myself.

I can’t find these tracks anywhere… any tips on where to buy them?

@lpjmodels

Жыл бұрын

I got mine on ebay, seems to be their only platform

Afv, miniart all carry 76.2 mm soviet @ells, plastic and brass, as this gun platform was paired with russian gun, Czech hull, it was a slav machine.

@lpjmodels

2 жыл бұрын

Thanks Rick ! I saw the miniart ones, but wasn't 100% sure they were the right ones.

Do you still have your every first model

@lpjmodels

2 жыл бұрын

No I'm afraid not. I have some photos of my first back into the hobby ( or one of )

Were any of these light tank destroyers, attached to German infantry divisions? I know Hetzers were. Still not sure if Panzer Grenadier Div Grossdeutchland had any or it,s spawn divisions?

@lpjmodels

2 жыл бұрын

I'm not sure I'm afraid !

building same model right now

@lpjmodels

2 жыл бұрын

How is it going ?

What needle did you use in the airbrush when doing the camouflage? I have a really hard time painting camouflage.

@lpjmodels

2 жыл бұрын

Hi Chris 0.15, but you could manage with a 0.2. What problems are you having?

@chriswegje

2 жыл бұрын

@@lpjmodels it keeps splashing to the sides and the lines are way to big

@lpjmodels

2 жыл бұрын

@@chriswegje what paint ? Also are the splashes like a stipple paint or runs that are like water being pushed away from the centre point.

@chriswegje

2 жыл бұрын

@@lpjmodels I use Vallejo Air paints it looks more like water pushed away

@lpjmodels

2 жыл бұрын

@@chriswegje vallejo aren't the easiest to use as a start, lots of folks have great results though. From the sound of it they are either too thin or you're using too much pressure. Get nice and close. No more than 1.5" lower your pressure to about 10 psi as a starting point and only move the trigger tiny amounts. You want to open the needle arpature just enough to let some paint out. Start tweaking as you figure your results, get speckles, add more pressure, got spidering, less pressure. Smooth paint but going down really dry or diffused, make sure to get close. If you're using a larger nozzle and needle .3-.5 you might have trouble getting really smooth graduations, you'll find some speckling on the edges. Certain colours are also more notorious for this than others. One of the reasons I moved to MRP mostly and other laquer based paints is the ease of spraying. Yes it's best to use a booth or mask or both, I use neither, and work in a well ventilated area. I figure I'm only spraying small amounts of paint so it won't be so bad.

🤝👌👍👏

@lpjmodels

2 жыл бұрын

Thanks Igor 😀

When you spray those super thin lines I guess you use very thinn paint and wery low psi. Maybe like 7 psi or maybe 10 since harder and steenbeck dont push a lot of air like the mr hobby procon.

Do you have a 3D printer? You could make shells and so on yourself. :)

@lpjmodels

2 жыл бұрын

I wish !

Letter Я sounds like German "ja". Then word in prewciew sounds "majadeja 3"

@lpjmodels

2 жыл бұрын

Thankyou for the help !

@AlexeySuVa

2 жыл бұрын

@@lpjmodels this is common phenomenon. All russian understands that means English letter R instead of russian letter Я, but it always confusing me for a while

why did you make such a nice little gun an evil american version?

@lpjmodels

2 жыл бұрын

It's russian. And because it's more interesting when it has a funky back story.

надпись на каком языке?

@lpjmodels

2 жыл бұрын

Good question. I tried to follow the refence pictures I provided.

@user-wy1iv9bj9b

2 жыл бұрын

@@lpjmodels You made a mistake. You need to write "На немца", but not "На немуа". На немца" means "(going to war) on the German"

@UncleT82

2 жыл бұрын

@@lpjmodels You wrote the Russian letter "У" /"U", instead of the Russian letter "Ц" /"C" the phrase turned out "на немУа", but it should be "на немЦа" and the model is very cool! Thank you, regards

Keep the good ideas going!! You could easily get more people watching with Promo'SM!!

Sorry but the way you are using the "fast setting" on the hull is not great. applying it onto on surface then bringing together means its almost dry,not wet enough for even a "light" tack ,if you come back to apply more. Just do it once when both parts are together. might get away with small parts but noy large slabs like this.

@lpjmodels

2 жыл бұрын

Hi Gary, it may be unorthodox but the parts haven't come apart

👍👍👍

@lpjmodels

2 жыл бұрын

Thanks Robin 😀