A DETAILED WALKTHROUGH ON HOW TO TIDY UP/ REMOVE TAIL PANEL FROM RE HIMALAYAN 450 AND MAKE A CUSTOM BRACKET FOR THE SAME.
Жүктеу.....
Пікірлер: 38
@raki123ish4 ай бұрын
You can put old himalayan tail light to that end… it will look great
@aakashnair9577
4 ай бұрын
Was about to tell that
@onelostrider4 ай бұрын
Looking much better now😍 and That's how it's done 🔥
@traillyfАй бұрын
Lovely looking tail. Though I'm waiting for rally cowl.
@brucebennett91544 ай бұрын
Great job Ben! Nice design and fabrication. I am discouraged with the fact that RE did not use better connections/fittings especially with the fact that their brand is taking off world wide. Better quality and brand loyalty will keep things going. Anywho keep it up and have fun!
@ONTWOWHEELSBEN
4 ай бұрын
thank you. and yes they should have paid more attention into their vendors.
@nikhiljose74644 ай бұрын
What if you 3D print that part? You could then give a rubber beading inside for a snug fit and not let water enter from the side.
@DAILY_FACTS_TREAT3 ай бұрын
You can now definately place any custom tail lamp ...which will killer❤❤
@veddeshmukh26444 ай бұрын
Looks mean and super clean job 💯💯
@ONTWOWHEELSBEN
4 ай бұрын
Thanks
@vibin.v4 ай бұрын
One doubt off context: do you feel your rear brake pad constantly rubbing against the disc? My disc gets hot after riding 500m. When I put the bike in centre stand and try to rotate the back wheel, I feel a resistance by the rear disc brakes. Is it ok or should I get it fixed?
@arunprasath28294 ай бұрын
🎉 🎉 🎉 By the way. Congratulations on your new beast 💗 🎉 🎉 🎉
@Masters_Yukesh4 ай бұрын
I can't wait for your future videos Please make video for what is your future plan with this bike like what your plans to modification
@andreasbrandstetter92214 ай бұрын
Looks much better this way 👍
@SANTHOSHVIJAYyoutube4 ай бұрын
definitely that is looking much better now
@Desmondhughe4 ай бұрын
Nicely done 👍
@rkavan4 ай бұрын
Damm bro made the bike look good
@cradle_pyreАй бұрын
I actualy like the painted tail part, its design pays hommage to 80ies enduros. I would want to get rid of the huge ugly licence plate holder and have the license plate and turn signals/rear lights mounted as close as possible to the painted tail whitout having it look cheap. but I guess you have to cut the original parts because you need to keep the most of it as inner fender and kind of custom craft a license plate holder onto it. furthermore they had to design the turn signals/rear lights mounting points askew so it's not that easy to come up with own brackets to hold them close to the license plate...
@vamsikurre4 ай бұрын
looking good, a tail tidy would improve even further?
@karthikeyan_i14 ай бұрын
This is great ☑️
@jixk79544 ай бұрын
We could have painted the white trim black, that could have done a similar job, except for the lip at the end, but anyways the color would make it unnoticeable
@incorrigible1174 ай бұрын
but ben bro, what abt the upcoming rally edition?
@rohitchaturvedi24274 ай бұрын
Great mod!
@thomaskamei42684 ай бұрын
Super👌👌👌
@kambuninadghose40214 ай бұрын
U can take plastic pieces from empty Mobile cans also!! They r flexible & "almost" tear prof....
@incorrigible1174 ай бұрын
ben bro,i think it would be good way to make profit by selling it ur subscribers.
@aviator99854 ай бұрын
Swap with entire Himalayan 411 rear fender
@instaranjanvlog4 ай бұрын
🔥🔥🔥
@arunprasath28294 ай бұрын
€ € € BEN $ $ $ Hello Ben. My new Himalayan has already started to show signs of weakness in its cone set.... I hope yours doesn't... But please do check for an alternate product for stock fittings. I saw your Timken bearing video. It was an amazing fit. Please check something like that and advise us.
@aviator9985
4 ай бұрын
@arunprasath2829 - happens due to bike front dead drop during arrival at Godown. Get a 3D Laser and verify your bike's rake angle.
@jamboozled9544 ай бұрын
With the hanle black, I don’t think it is noticeable.
@km24fit234 ай бұрын
first like . first comment
@brummil4 ай бұрын
Dont forget the groundplate, Headlightcover, chain oiler or Rack. And remove the ugly black low front fender. This where the first thing, i would remove.
@partha_vinod4 ай бұрын
bro can you do a tutorial on removing the himalayan 452's windsheald
Пікірлер: 38
You can put old himalayan tail light to that end… it will look great
@aakashnair9577
4 ай бұрын
Was about to tell that
Looking much better now😍 and That's how it's done 🔥
Lovely looking tail. Though I'm waiting for rally cowl.
Great job Ben! Nice design and fabrication. I am discouraged with the fact that RE did not use better connections/fittings especially with the fact that their brand is taking off world wide. Better quality and brand loyalty will keep things going. Anywho keep it up and have fun!
@ONTWOWHEELSBEN
4 ай бұрын
thank you. and yes they should have paid more attention into their vendors.
What if you 3D print that part? You could then give a rubber beading inside for a snug fit and not let water enter from the side.
You can now definately place any custom tail lamp ...which will killer❤❤
Looks mean and super clean job 💯💯
@ONTWOWHEELSBEN
4 ай бұрын
Thanks
One doubt off context: do you feel your rear brake pad constantly rubbing against the disc? My disc gets hot after riding 500m. When I put the bike in centre stand and try to rotate the back wheel, I feel a resistance by the rear disc brakes. Is it ok or should I get it fixed?
🎉 🎉 🎉 By the way. Congratulations on your new beast 💗 🎉 🎉 🎉
I can't wait for your future videos Please make video for what is your future plan with this bike like what your plans to modification
Looks much better this way 👍
definitely that is looking much better now
Nicely done 👍
Damm bro made the bike look good
I actualy like the painted tail part, its design pays hommage to 80ies enduros. I would want to get rid of the huge ugly licence plate holder and have the license plate and turn signals/rear lights mounted as close as possible to the painted tail whitout having it look cheap. but I guess you have to cut the original parts because you need to keep the most of it as inner fender and kind of custom craft a license plate holder onto it. furthermore they had to design the turn signals/rear lights mounting points askew so it's not that easy to come up with own brackets to hold them close to the license plate...
looking good, a tail tidy would improve even further?
This is great ☑️
We could have painted the white trim black, that could have done a similar job, except for the lip at the end, but anyways the color would make it unnoticeable
but ben bro, what abt the upcoming rally edition?
Great mod!
Super👌👌👌
U can take plastic pieces from empty Mobile cans also!! They r flexible & "almost" tear prof....
ben bro,i think it would be good way to make profit by selling it ur subscribers.
Swap with entire Himalayan 411 rear fender
🔥🔥🔥
€ € € BEN $ $ $ Hello Ben. My new Himalayan has already started to show signs of weakness in its cone set.... I hope yours doesn't... But please do check for an alternate product for stock fittings. I saw your Timken bearing video. It was an amazing fit. Please check something like that and advise us.
@aviator9985
4 ай бұрын
@arunprasath2829 - happens due to bike front dead drop during arrival at Godown. Get a 3D Laser and verify your bike's rake angle.
With the hanle black, I don’t think it is noticeable.
first like . first comment
Dont forget the groundplate, Headlightcover, chain oiler or Rack. And remove the ugly black low front fender. This where the first thing, i would remove.
bro can you do a tutorial on removing the himalayan 452's windsheald
Your template looks like a Tshirt 😂
Yeah, scoring, we know!
also the indicators are too flappy
Crafty......