It's about time some more adjustable UCAs hit the market!

Heim joints with protection? Sold. You guys make great products and I can’t wait to get these now!

@accutuneoffroad

2 жыл бұрын

Thank you!

This is awesome!

If it moves the wheel forward instead of backwards like a lot of aftermarket UPC. What do the caster numbers look like after a 2-3" lift on say a 3rd gen? Is there positive or negative caster built into these UPC's?

@accutuneoffroad

2 жыл бұрын

We are shooting for 2-4 degrees of caster with the rear cam adjusters all the way out, front all the way in.

@accordv6er

Жыл бұрын

@@accutuneoffroad make us a "mid" travel LCA to match it with! :d

I'm in. But you know the next biggest question... What's the largest diameter tire you can run with these set all the way as shown that will NOT hit when the tire articulates upwards?

@accutuneoffroad

2 жыл бұрын

Hmmm how many sawzall blades do you have? Thats a hard question to answer since we have not tried every tire size option out there. I can confirm Milestar & BFG A/T 285/70/17s with 4.5" backspacing fit. Every tire manufacturer is a bit different though, some run true to size and others run small.

Is there a big difference in vibration between bushings and heim joints? I’m worried the heim joints will rattle my truck apart. I’m new to purchasing uca’s

@accutuneoffroad

Жыл бұрын

The front lower control arms take most of the abuse from terrain, which have rubber joints. Upper heim's wont be a drastic change in feel like you mentioned. Air pressure, correct spring rates and valving will keep your truck from rattling apart.

@TheNewps

2 ай бұрын

@@accutuneoffroad Why did you go with heims over polyurethane? I get they are adjustable but aren't upper arms on Tacoma's set and forget? I really like the seals you developed. That should help them last longer and not squeak. I'm guessing you went with them for more adjustment options, i.e. different lift heights?

@accutuneoffroad

2 ай бұрын

@@TheNewps Heims offer adjustability, precise fitment and durability.

Can these be run with a smaller lift - say 1.75 inch? I have a small amount of tire rub on the stock UPC with my wheel/tire setup.

@accutuneoffroad

Жыл бұрын

Yes they can.

How does the down travel compare to the delta joint

@accutuneoffroad

2 жыл бұрын

They both articulate plenty and the shock would be limiting the overall droop travel before the ball joint binds.

@ronaldmendes6299

2 жыл бұрын

@@accutuneoffroad good point thanks for the reply

Hi, are these UCAs compatible with the current generation Hilux?

@accutuneoffroad

Жыл бұрын

Unfortunately I cannot confirm fitment on those models

@shootinbruin3614

Жыл бұрын

@@accutuneoffroad Got it. Thanks for the response

If I’m running 285 K02 on a 2022 4 runner pro will these UCA rub?

@accutuneoffroad

Жыл бұрын

We cannot guarantee fitment for every tire/wheel combo, however we have had great results with a 285/70/17 tire with 4.5" of backspacing on a 9" wide wheel.

@FourT6and22

3 ай бұрын

@@accutuneoffroad 4.5" backspacing on a 9" wheel is what... max of -12 offset? Most 9" wheels people run have more than that. Or they run a 1.25" spacer on a -10 or -12 wheel.

I'm currently running JBA high caster uca and clears 285/70/17 KO2s on my 4th gen(with a minor bmc) just fine. But i'm thinking about going up to a true 34s like a 295 or 285/75. would you be able to comment on roughly how much more tire clearance would I get by switching to AccuTune uca?

@accutuneoffroad

10 ай бұрын

Thats a really tough question to answer, I wouldn't be able to compare your current setup to something else that has not been installed.

Take trade-ins on Jba lol

@accutuneoffroad

2 жыл бұрын

Yes we will trade those arms + $899 for our UCA ;)

@Overlandlife_

2 жыл бұрын

@@accutuneoffroad I’m gonna have to give them a try my truck wonders bad on the road with fox 2.5s and I ride all of the time and scub with 285/70/17s all over my cab mount

@accutuneoffroad

2 жыл бұрын

@@Overlandlife_ Well we can't confrim these arms would fix the wandering issue. That could be caused from several other things not related to the UCA. It would be worth getting it looked at ahead of time before making the switch.

Cost?

@accutuneoffroad

2 жыл бұрын

$899.95 Link with more details is in the description above

I like my dirt king hemi upper 🤤

@adamwest3637

Жыл бұрын

Those are the ones I’m most likely getting. Do you notice a big difference in vibration from stock bushings to heim joints?

@stevegarcia3229

Жыл бұрын

They feel good man no vibrations at all and it lets you get the alignment on point

I have questions about gas charge pressure and shaft diameter and ended up here but still have those questions 😂 who wants to deal with me?

@accutuneoffroad

Жыл бұрын

Not sure what exactly you are wanting to know, but you can email our sales team Sales@accutuneoffroad.com

These are too pricey

@accutuneoffroad

Жыл бұрын

Quality parts are not cheap