Tack It Method Glitter Stainless Steel Tumbler Tutorial | Bee Jay's Glitter | Tumblerpoxy
Тәжірибелік нұсқаулар және стиль
Thank you for watching my tutorial on how to apply glitter to a stainless steel tumbler via the "tack it" method! This DIY tutorial video is designed to explain just how simple it can be to decorate a stainless steel tumbler and to help fellow crafters create new products.
We have officially launched our KCC Glitter website, check it out here! kccglitter.com/
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoffee.com/KCCyoutube
Check out our Facebook community group! / epoxytumblersandpens
About me: I have been making epoxy tumblers for approximately six years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
Products I use frequently and highly recommended:
Tack-It - amzn.to/3ao2nGX
Butane Torch - amzn.to/3pM06wr
Rust-Oleum Flat White Spray Paint - amzn.to/3nILLz1
Cup Turner - amzn.to/3l1xBaw
Paint Brushes - amzn.to/36xlZaO
220 Grit Sandpaper - amzn.to/3rYKC9j
Rust-Oleum Gloss Clear Spray Paint - amzn.to/2HfFKKm
Gloves - amzn.to/36QSrUP
Silicone Mats - amzn.to/32YW5Lf
Cup turner motors - amzn.to/2IWXBGI
Plastic mixing cups with measurements - amzn.to/3lLARrG
Medicine cups - amzn.to/3kQFQWC
Zippo Butane Fuel - amzn.to/3lT39Ra
Chip Paint Brushes - amzn.to/373Z4V7
Alcohol Ink - amzn.to/3oH4paG
Cup Turner Foam Inserts - amzn.to/2UKBQfE
GlitterBae Glitter - www.glitterbae.com/?ref=krist...
Blingasm Waterslide Paper - amzn.to/3fcRiL8
Faux Rizzle Epoxy - amzn.to/2IT02dI
Counter Culture Epoxy - amzn.to/3pRzFW6
Painters Tape - amzn.to/3lRGuVa
Popsicle Sticks - amzn.to/3nG33fU
Paper Mate Pens - amzn.to/3o0Lh7n
Wooden Dowel Rods - amzn.to/37WBrOD
Faux Rizzle Epoxy - amzn.to/3nZFM9h
Counter Culture Epoxy - amzn.to/3pRzFW6
Finger Cots - amzn.to/3qprjo0
Epoxy Mixing Cups - amzn.to/3s200C0
Oracle 651 Vinyl - amzn.to/399SUCM
Turner Foam Inserts - amzn.to/2XkuEZ7
Craft Knife - amzn.to/3pXOlCk
Decal Applicator - amzn.to/2MFMOm2
Vinyl Weeding Tools - amzn.to/38jAaBq
Transfer Tape - amzn.to/2Xl95HC
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicsound.com/referra...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.
Пікірлер: 60
Thank you for this video and you’re explanation of what you are doing and WHY!! ❤
Love your method and how you explained the reasoning behind your approach thank you it’s a big help for me
Yes they are absolutely stunning!
@KristisCustomCreations
2 жыл бұрын
Thanks!!!
Those are beautiful!
@KristisCustomCreations
3 жыл бұрын
Thanks!
Love your video! Quick, simple and easy. Your cups came out beautifully!
@KristisCustomCreations
4 ай бұрын
Thank you! ❤️
Bee Jay's glitter is awesome! Opalina is one to try with tack it, its gorgeous!
@KristisCustomCreations
Жыл бұрын
Yes it is.... I love Bee Jay's glitter and the owners are amazing. Opalina is one of my all time favorites.
Beautiful 😍
@KristisCustomCreations
3 жыл бұрын
Thanks!
Beautiful cups. On the blue you could something with the sky.... stars
@KristisCustomCreations
3 жыл бұрын
Thank you! 😊 Yes, that's a great idea!
Thank you sooooo much for the trick of adding the water. I was using it straight and it dried to quickly and I had to wash it off. I then remembered what you said about the water and I was so happy with the result. It was my first time trying this technique and with your help I so love how my tumbler turned out. Thank you so much :)
@KristisCustomCreations
Жыл бұрын
You're very welcome! I'm so glad it worked out for you!!! 🥰
WoW😳🤩
@KristisCustomCreations
3 жыл бұрын
Thank you! 🥰
Wooow
@KristisCustomCreations
3 жыл бұрын
:)
They came out beautiful! Did you sand the tumblers before painting them?
When I do the tack it method I put the glue on straight but use a wet brush. It seems to help me avoid over diluting the glue. Also try using gloves for the initial burnishing, thing switch to your bare hands. I have to agree I have yet to get the glitter to lay as well with gloves on.
@KristisCustomCreations
3 жыл бұрын
That's a really great idea using a wet brush! Thanks for the tip!
Excellant. Love this process. Thanks for all the links. I just completed first order to you as I ordered just one color of glitter. I hope it is the halogriphic?
@KristisCustomCreations
Жыл бұрын
Thank you for your order! Yes it is holographic that you ordered and that will work perfectly for this method. I threw in an extra bottle of glitter for you also. 😊 Mailman has already picked up your package and it is headed to you! Have a great weekend!
They're beautiful I thought the pink / magenta was red in the cover photo. You don't see ENOUGH tumblers done with RED. I'm talking about a beautiful deep red. NOT orange red. Maybe you can make one soon? Too many people tend to think red is only for Christmas or Valentine. So not true you could make a beautiful summer cup using red
@KristisCustomCreations
3 жыл бұрын
Yep!!!! They have some beautiful red Holographic glitters too! Red is one of my favorite colors. 🥰
@ssue4q
3 жыл бұрын
@@KristisCustomCreations Me too! I don't know what it is but lately I've just really been loving it. 😆 thanks for sharing hope we get to see the finished product on both of these soon
I’m just getting started in learning to do tumblers. Can you explain what you do when you prep a tumbler? Do you use sand paper on it?
@KristisCustomCreations
3 ай бұрын
Welcome to the world of tumblers! Lol! Just sand the tumbler with sandpaper to rough up the service. I like to wash with dawn then wipe with acetone afterwards just to make sure there's no oil from my hands on it.
I was wanting to add a light dusting of a second color of glitter. How do I handle that or does that not work with this method?
can you use just regular gilliter?
Amazon link for epoxy poxy states it is currently unavailable. Do you have another resource for it?
This is beautiful! Do you have to use holographic glitter?
@KristisCustomCreations
Жыл бұрын
Holographic glitter works best with the tackett method because of the way it shines. You can use any glitter but you won't get the holographic look with a regular metallic glitter.
@blancamendoza2120
Жыл бұрын
Thank you! I love all your videos!!
@KristisCustomCreations
Жыл бұрын
@@blancamendoza2120 thank you so much! 🥰
Should we seal the glitter with a clear spray or am I good to just jump straight to the epoxy?
@KristisCustomCreations
3 жыл бұрын
You can spray seal if you want to but the glitter isn't going to move once on with the tack it method. Sometimes since the glitter is laying so flat from the tack it method, it can help prevent fish eyes on that first coat if you spray it first. But you don't have to spray it.. most of the time with a tack it cup, I don't spray it with clear before epoxy.
Do u not seal the glitter b4 epoxy? If u use a decal, would u put it on the cup b4 epoxy or after? If u use vinyl for the decal, would the epoxy adhere well?
@KristisCustomCreations
Жыл бұрын
You can seal the glitter before epoxy but it's not required. Stealing the glitter helps keep the glitter from trying to repel the epoxy. You would want to put a code of epoxy on the tumbler before putting a decal or vinyl on it. Also, you can seal the vinyl in with epoxy after applying a vinyl decal. I hope that answers your questions!
So I’ve just started making tumblers, just for fun bc my main creative outlet has been taken from me due to health issues, anyway I did a tack it method tumbler a couple nights ago and it took maybe an hour to get the glitter burnished/laid down, is there anyway to make that quicker/easier on the hands? Lol I just can’t spend that much physical energy getting the glitter to lay down or is this another hobby that’s not gonna work out for me bc my bod can’t handle the labor of it? I really thought this was gonna be something I could do to fill that creative void
@KristisCustomCreations
3 жыл бұрын
Yes, there's quite a bit of effort that goes in to it. I've seen someone use a piece of a pool noodle instead of their hands but I've never personally tried it myself.
I am thinking of doing the tack it method with a white fine glitter and then put a layer of color shifting chunky glitter that I ordered over it before epoxy. Thoughts?
@KristisCustomCreations
Жыл бұрын
You could probably do that! I think that would look really cool! I'd love to see it when you do!
@kimbrown9412
Жыл бұрын
@@KristisCustomCreations I will def show you. I just decided to use a repositionable spray glue and put the first layer of fine white glitter on. Used the wax paper to press it down a little. I am considering spraying with a matte clear coat before putting the color shift glitter on. The color shift arrives Wednesday.
@kimbrown9412
Жыл бұрын
@@KristisCustomCreations how would I show you when done? Can I post pics here or somewhere else?
Hi , hope someone can answer a question for me. I was wondering if I could do a second layer of glitter after I burnish it off if it doesn't look right? I have some spots I'm just not happy with. I'm doing a primed tube vase. My others have turned out pretty good. thanks for any help
@karennixt2879
2 жыл бұрын
you answered my question at the beginning of the video
@KristisCustomCreations
2 жыл бұрын
Lol, awesome... Glad you got your answer 🥰
Kristi, how did you make your tumbler turns?
@quisenberrylearn2978
3 ай бұрын
I just love these, and have never done one before... So trying to learn everything! These are beautiful!
Cab you use any tacky glue for this project?
@KristisCustomCreations
Жыл бұрын
There are other products out there that will work but I've never used them. If it remains tacky after it dries then in theory it should work. 😊
If your cup is already a color you want do you still need to spray paint before using this method. Can anyone help me with this? Thanks
@KristisCustomCreations
5 ай бұрын
If your cup is already that color, no you don't have to spray paint it. Just make sure you prep the surface first.
@kaydavis8569
5 ай бұрын
Thank you so much!
@KristisCustomCreations
5 ай бұрын
@@kaydavis8569 you're welcome!
What about tacky glue?
@KristisCustomCreations
Жыл бұрын
I've never used tacky glue before but if it remains tacky like Tack-It does then it would probably work.