Simple and effective,now all it needs is a dust collector!

@magicalsleeper

4 жыл бұрын

ZXCharlieR the first cut at the end made me laugh with that big ol sawdust cloud 😁

@moroccandiycreators5966

4 жыл бұрын

kzread.info/dash/bejne/c2yCqq2CY7y6l9o.html

@intell0

4 жыл бұрын

@@moroccandiycreators5966 ?

@moroccandiycreators5966

4 жыл бұрын

@@intell0 hi you can see my channel just started, you can also subscribe

@suchanx7

2 жыл бұрын

where would we need that for? i have perfectly functioning nose and lungs

심플하고 효율적이에요 배워갑니다 좋은영상 감사합니다!

The simplicity and the effectiveness of this method is extremely well. If I can only bring one knowledge of building a table saw, this is the one I'll pick.

Teu trabalho ficou simples e efetivo, faça uma caixa em volta da serra com encaixe para aspirador de pó, só isso para ficar 100%, abraços do Brazil

This is most simple way to make table saw I have ever seen, even I am as a beginner in woodworking will be able to make my own table saw. Thank You so much about your usefull video God Bless You👍🙏

@farnorth7314

3 жыл бұрын

Don't do it! Buy a proper table saw...I really like this channel, but this is a really really bad idea.

깔끔해서 군더더기가 없고 완성도가 높은 훌륭한 솜씨 입니다.

@dekayscrafts

3 жыл бұрын

감사합니다 ^^

Nice work. I would add a T-Track on each side for "feather boards" to prevent kick back and possibly a miter gauge and / or cutoff sled

Thank you for this video. I’m working on a homemade router table, and I’ve been trying to figure out how I’m going to do the fence. I’m going to do something really similar to what you did here. You’re awesome!

Great work. This is as basic as it gets to a simple DIY table-saw that really can be accomplished w/o having drill press, friggin' blowtorch and other big-ass equipment, unlike other "DIY table-saw using SIMPLE tools" videos...

Thanks for sharing! Easy to build and it works! Great idea with the toggle-clamps; I've never seen it this way before!

@dekayscrafts

4 жыл бұрын

Thanks =)

@moroccandiycreators5966

4 жыл бұрын

kzread.info/dash/bejne/c2yCqq2CY7y6l9o.html

플로우님 영상 보다 들러봅니다. 한국분들도 많으시지만 외국분들도 시청을 많이 하시네요. ㅎㅎ 좋은 영상 잘 보고 갑니다. 감사합니다 😊

@dekayscrafts

5 жыл бұрын

안녕하세요~ 주제가 목공DIY이다보니 해외에서도 보시는것 같아요 들러주셔서 감사합니다^^

Супер просто дешево и технологично. Всегда можно использовать ручную пилу в других целях. 👍👍 👍 👍 👍

진정한 능력자시네요~언제나 즐거운 목공하세요~^^

@dekayscrafts

5 жыл бұрын

감사합니다~~ ^^

Nice job! Suggestion: add a ruler to the table top's edge and a marking on the fence's "guide" for reference.

@moroccandiycreators5966

4 жыл бұрын

kzread.info/dash/bejne/c2yCqq2CY7y6l9o.html

Mantap kawan sukses selalu buat mu ok abis itu aku suka sekali cara mu buat nya.

깔끔한 화면 구성과 멋진 작품.....대단하십니다

@dekayscrafts

4 жыл бұрын

감사합니다^^

잘보고 갑니다 ^^ 조기대 고정 부분이 마음에 드내요 ^^ 목공은 잘 모르고 관심만 가지고 있는 1인 입니다.

@dekayscrafts

5 жыл бұрын

감사합니다~ 저도 잘 모르는 초보이니 같이 시작하시죠 ^^

Unique clamping system... Simple and bloody brilliant!

@dekayscrafts

4 жыл бұрын

Super thank you =)

와 이거 너무 훌륭합니다-! 따라 해보고 싶어요~!

외국꺼만보다가 한국에도 이런분이 있다는게 좋네요 구독 박고 잘보겠습니다

@dekayscrafts

3 жыл бұрын

오랜만에 보는 한글 ㅠ 감사합니다~~

Super helpful, al it needs is a vacuum and youbare set! 👍 thank you

A very well thought out diy table saw. Nice and simple is sometimes the best approach. I agree with another comment that you ideally need to add dust collection which I think you can easily achieve. You clearly didn’t intend to build a very complicated table saw so I don’t necessarily agree with the comment that “there is a lot of room for improvement “ especially as I feel you are more than capable if that is what you had set out to do. However if I may make as observation which is safety related. You are currently not protected against kick backs so you might want to consider installing a riving knife and maybe a simple blade guard. Otherwise a really nice neat low cost table saw. I especially like your approach to the fence. 👍

@BrassLock

3 жыл бұрын

@ Steve 127 Your 2 suggestions sound straightforward, but in fact are quite complex tasks to achieve on this simple arrangement. ● Do you have any suggestions at all as to how they might be achieved? Looking forward to your in-depth response 🤔

전문가의 손길이 느껴집니다. 굿 Good

@dekayscrafts

4 жыл бұрын

감사합니다 ^^

Very nice! So simple and practical. Thank you for the video!

Really simple to build. Thanks!

This is the simplest and most effective idea so far l seen on the KZread. Well done dude.👍

@dekayscrafts

4 жыл бұрын

Thanks for kind words :D

멋지네요 좋은 정보 고맙습니다

I was impressed about then fence system, simple and ingenious. Would have never thought of the clamps like that .. I need a new fence for my table saw ... this could be a winner

@dekayscrafts

4 жыл бұрын

Thank you so much =)

@junflores8776

4 жыл бұрын

What do you call the special clamp

@jonnycaccioppoli7465

4 жыл бұрын

I'm interested at clamp, where I can buy?

@markvickers9677

4 жыл бұрын

Toggle clamps 😁

nice, simple, user friendly DIY table saw and fence, I've seen many other clips which are complicated and not easy to make.....

몇개월전부터 유튜브 가끔 보고 있습니다. 정말 대단하십니다. 그래서 처음부터 하나씩 따라해 볼려고 첫번째 동영상을 보았습니다. 아래 댓글을 보니 이때(지금으로부터 약 1년전)가 초보라고 쓰셨는데 이걸 보고 더 깜짝 놀랐습니다. 아무튼 대단하시고 참으로 창의적이십니다. 앞으로도 좋은 동영상 많이 부탁드립니다. 그리고 원래 하시는 일이 궁금해지네요. ^^

@dekayscrafts

4 жыл бұрын

안녕하세요~ 댓글 감사합니다. 저는 건죽 설계일을 12년 했고 목공은 이번에 처음이예요 잘 부탁 드립니다^^

DK - if you add 2 small bolts with hex heads to the inner surface of the fence runner (the bit that runs along the edge of the table) at each end where the toggle clams are, you'll then be able to "tune in" the fence to be PERFECTLY 90 deg to the TABLE, by adjusting the bolts forwards or backwards - there are various ways to do this, but the most simple would be to draw a pencil line on the table along the fence, then flip the fence to the other side of the table and see how it lines up, a discrepancy will be obvious (it's the same trick as checking a carpenters square for "square". Once you've got the fence to a perfect 90 deg to the TABLE, then you can also fine tune the blade to the fence by just slightly enlarging the screw holes holding the saw frame to the table and making tiny adjustments until tha saw blade is perfectly aligned ot the fence. This is standard practice for setting up a table saw - having a misaligned blade or fence will cause unlimited poroblems until it's correctly set and aligned to each other. I realise this advice is 2.5 years late, but just in case anyone else see's your idea and uses it.

Very straight forward and practical👍

Excelente idea, buen trabajo, sencillo y muy útil. Saludos

Te acompanho desde o Brasil muito bom teu trabalho

Simple and effective. Good to have a very smooth surface for the wood to slide. Greatest concern is that there's no riving knife. For anyone not familiar with table saws and new to them, I strongly recommend you understand what "kickback" is and how the riving knife will stop this from happening. Without the riving knife you will 1) What to make sure your guard opens up away from the blade a small amount 2) Use a push stick to push would through closer to the blade One pro of no riving knife is that you could use the table saw to make crown molding by cutting on a 45 and adjusting the blade up 1/8th of an inch each time.

정말 잘 만드시네요! 완전 프로 같아요 ㅎ 인정 ㅋ 인정 ㅋ 잘 보고 선물삼종세트 남기고 가요 ㅋ 좋은 영상 다음에도 기대할게요 ㅋ

@dekayscrafts

4 жыл бұрын

아이고 과찬이십니다 ㅋㅋ 감사해요~

잘봤습니다 집진기능 추가되면 좋겠네요

@dekayscrafts

5 жыл бұрын

들러주셔서 감사합니다~ 집진기 부품도 중국에서 건너오고 있어요 준비 되는대로 올리겠습니다~~

베큠 연결 하면 먼지뒤집어 쓰지 않을텐데요. 일반테이블에 간단히 테이블쏘 만드는것 잘 봤읍니다.Thank you! Good Idea!

@dekayscrafts

4 жыл бұрын

분진 엄청 심해서 최근 영상에 만들었어요 시청해주셔서 감사해요 ~

지금까지 봤던거중에 가장 간단하군요

@dekayscrafts

5 жыл бұрын

감사합니다 ^^

Excellent. Love the fence. Great job.

So simple and so effective! 👌👌

Gives me a nice idea when i want to make my own..nice tutorial video for me..thanks.

Muito bom. Prático e fácil de fazer 👍👍👍👍

@dekayscrafts

5 жыл бұрын

Muito bom. Prático e fácil de fazer

초보분들께서는 영상은 참고용이 좋을듯합니다~ 수평이 조금만 틀어져도 킥백 발생할수 있습니다~ 첫째도 안전 둘째도 안전 다들 안전하고 즐거운 목공되세요~ 잘보고가요 김팀장님~!!

@dekayscrafts

4 жыл бұрын

좋은 말씀 감사합니다 ^^

Muito bom 😃 parabéns

Very nice, unique, simple design. Great job!

@dekayscrafts

4 жыл бұрын

Thank you :-)

I need one of these for small jobs so I don't have to take out my big table saw. Great job.

Thank you

Excelente idea, gracias por compartir

Amazing. Great job. The only thing I would suggest is putting a little wax on the sliders to keep them moving freely.

@dekayscrafts

3 жыл бұрын

Good idea Thanks =)

Muy facil y practico video , Buen trabajo !!!

I've watched this video for almost 5 times. Nice video for my imagination.

@mohnurarizal9781

4 жыл бұрын

토마스과학실험ThomasScience sasayaminntakfilampooroohsayamintafilamponoosayamintskys

@mohnurarizal9781

4 жыл бұрын

토마스과학실험ThomasScience ssayamintaklaguarickite

지그 지존이 많은지 처음 알았어요...대단한불 진짜 많으시네요

저도 도전해 보겠습니다

Muy buena idea. Saludos desde Argentina 🇦🇷

Complimenti bellissima idea 👍👍👍👍👍👍👍

@dekayscrafts

5 жыл бұрын

E 'bello vederti. Grazie Incontra spesso :)

Thanks 4 tutorial, good idea👍👍👍👍

Nice build. I enjoyed the video. I wouldn't do it myself, but I appreciate the ingenuity.

@dekayscrafts

4 жыл бұрын

Thank you :)

Thank you so much for this video^^♥♥♥ This is the best and the most simple one i have ever seen so far!!! Thanks♥♥♥♥♥

Bem planejado. Parabéns

@dekayscrafts

4 жыл бұрын

Obrigada

the best is the baggie of glue.

Gracias por compartir. Tu idea es muy buena. Menos complicada que en otros videos. Se veria genial con luces leds😲✌

@dekayscrafts

5 жыл бұрын

Gracias por tu alabanza. Subiré un buen video de nuevo.

@rodrigozambrano7821

3 жыл бұрын

Hola muy sencillo...muy bueno. Donde puede adquirir esas pinzas que dejan fijas el riel desplazante? Te agradeceria me dijeras para comprarlas

Locking hocks very good

Good job. Congratulations!.. Thank you

Very nice. Very pretty, and the fence clamps particularly are really cool. You really should have some kind of a riving knife, though - even if it's just a piece of aluminum angle. I'm not an expert, but my understanding is that a riving knife is the #1 line of defense against kickback.

Thnx. Just what i was wanting but couldnt work ot out 😁 so simple.

Ótima ideia vou fazer igual

Good jobs👍

very effect simple design 👍

썰매지그도 제작하심 ...작은거 자를때는 킥백도 피하고 좋아요

@dekayscrafts

5 жыл бұрын

안녕하세요 만물상회님~ 썰매 만들려고 준비중인데 몇가지 방법을 두고 고민중이었어요 곧 영상 만들어서 올려보겠습니다~~

Good Idea. I would put bearings on the other side to stop the rocking.

obrigado por compartilhar este vídeo, bom trabalho.

@jocielaraujo4468

3 жыл бұрын

Agora quem sabe o nome desse grampo que ele usou????

@josefmarzano3914

3 жыл бұрын

@@jocielaraujo4468 grampo sargento

@josefmarzano3914

3 жыл бұрын

@@jocielaraujo4468 Bessey Auto-Adjust Toggle Clamps

great video. thanks for sharing

Gracias por compartir sus conocimientos

@manuelperez1405

4 жыл бұрын

Ustedes son los mejores saludos camaradas

Great project, can you take the steps?

Excellent! And one heck of a lot cheaper than the $650 I was ready to spend .......

daria 10.000 gostei. muito simples e resultado espetacular.

@dekayscrafts

4 жыл бұрын

Obrigado!

Thanks friend

Nice and simple design, though a lot of room for improovement.

@dekayscrafts

5 жыл бұрын

Thanks :)

Que ingenio..un berraco

well done man 👍🏻👍🏻

@dekayscrafts

5 жыл бұрын

Thank you ~👍🏻👍🏻 :)

muito bom excelente trabalho que Deus te abençoe pôr essa dica porquê tem gente que sabe fazer as coisas e não mostra nem ensina a ninguém.

@felipefacanha8866

2 жыл бұрын

Verdade viu Luis

Excellent.

It’s obvious that too many people don’t care or are oblivious to what can happen to them!

Thanks for these ideas

@dekayscrafts

4 жыл бұрын

Thanks =)

나이들면 고생해요 무릎 보호대. 안전화 필수. 잘 보고갑니다.

@dekayscrafts

4 жыл бұрын

네 알겠습니다. 말씀 감사합니다. ^^

It's really very good. Is coming fast. At 10 days only. Tnxs very much bangood

Parts list? Like those table clamps? Type of wood or if you put a finish or oil on the woood to make it slide better and where you get the tracks the clamps slide on? Thanks and I love all your videos, you’re so talented and make everything a lot more learnable unlike most videos, you create amazing work with basic power tools...it shows your true skill and proves you can build anything as long as you use your creativity

Easy & cheap. Great! 😎🤙

@dekayscrafts

5 жыл бұрын

thank you Baschroe 🤙🤙🤙🤙

Nice work 👍 👍

@dekayscrafts

5 жыл бұрын

Thanks :)

Muito bom

태어날때부터 천재시네 ㅋ

잘하시네요

@dekayscrafts

5 жыл бұрын

감사합니다~~

Before anyone decides to make this from this video, I highly suggest watching some table saw kickback videos. I noticed the board was twitching side to side when you were beginning to feed the board. You are not supposed to push the off piece. It's simple design many people choose not to make for good reason. Table saw is the most dangerous tool in the shop.

@dekayscrafts

4 жыл бұрын

That's right. Thanks for the good comments. =)

@stevek5988

4 жыл бұрын

Nope, uneducated and inexperienced are the most dangerous

@louieg8825

4 жыл бұрын

yeah i noticed that he put the fence on reverse.

@maulanasaidalbana8188

4 жыл бұрын

Is make a circular saw to be table saw with just screw is not safe for long term using? I see a lot of video of it and decide to buy a real table saw with little range of price.. it have better safety i think

I definitely won't use any MDF again indoors! :D I just can't stand the dusts. Nice DIY table saw by the way!

제가찾던 영상 감사드림니다 ~~^^;

you are great man

mudah membuatnya dan sangat simple.. semoga canel indonesia bisa buat se simple ini, yang gak bertele2 😎👍

Genial amigo es muy proyecto muy práctico y sencillo me gusto un saludo tu amigo 1417 😁👍

@dekayscrafts

5 жыл бұрын

Gracias por tu alabanza. :)

Good job 👍