Table Made From A Pallet
Тәжірибелік нұсқаулар және стиль
10% off for all GX ranges 16th August - 5th September
Models : GX7050, GX6050, GX5050, GX4050, GX3050
Voucher Code : Badgercan10
canon.sm/3KzKA2E
Participating retailers:
Ryman
Printerbase
Printerland
Staples
I was asked to make a table so I used a reclaimed pallet to make it.
Thank you to Canon for sponsoring this video
Tools I use
www.badgerworkshop.com/toolsiuse
As an Amazon Associate I earn from qualifying purchases
Support me on Patreon
/ badgerworkshop
Support me with PayPal
paypal.me/badgerworkshop
🎧 WORKSHOP BANTER PODCAST 🎧
/ workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
Social Media
/ badgerworkshop
/ badgerworkshop
www.badgerworkshop.com
Music from Uppbeat (free for Creators!):
uppbeat.io/t/sky-toes/delicat...
Пікірлер: 70
10% off for all GX ranges 16th August - 5th September Models : GX7050, GX6050, GX5050, GX4050, GX3050 Voucher Code : Badgercan10 canon.sm/3KzKA2E
I bought a canon printer a year or so ago, it has been very good. The reservoirs have been a revolution. So much cheaper than cartridges. Nice project, the slide design worked really well
"excuse that action" had me in stitches 😂 Genuine look of disgust over it. Cool project though. Something different.
What a pretty table for a childs bedroom
Good video,hideous table 🤣🤣 I would not want it in my house either so fair play to you for filming it!
Hahaha. The table, not to my liking but very well executed. Also, this gave me a chance to reflect on how well filmed and produced your videos are. It is always relaxing to watch your videos. I realise it goes a lot of work into making the content. Keep it up.
@Badgerworkshop
10 ай бұрын
Thank you very much
You don't fool us Matt, we know that table is really for your house ! The banner printing feature on that printer looks excellent and the ink refill is a welcome change too !
@Badgerworkshop
10 ай бұрын
You see right through me
Nice job Matt. I like the way you show the printer in a similar way to the solar generator. Horrible table project well executed 😂. I'll try the stotting technique.
Great table!
Hey Matt! Terrific tulip table there, mate! And I'm sure that anyone who you call a friend is a lucky person. Take care. Don
@Badgerworkshop
10 ай бұрын
Thank you Don
Nicely done! Would make for a great flat pack project too with the way it just slots together! Lovely use of the printer too, really like seeing the actual ink levels.
@Badgerworkshop
10 ай бұрын
Yes it would flat pack great
That's a bold look. Not out of place in a shop or a cafe though.
@Badgerworkshop
10 ай бұрын
Yes definitely bold
Unusual
I must say that at first I thought what an odd sponsorship but the template printing seems genuinely useful. Good call.
@Badgerworkshop
10 ай бұрын
Thank you
Nice job Matt and a great machine thanks for the information 🍺👍👍
@Badgerworkshop
10 ай бұрын
Thank you
How come you never filled the old nail holes especially if it’s being painted over?
@alistairstanger2940
10 ай бұрын
They were on the bottom so are not visible
@blimpage
10 ай бұрын
Speed holes. They make the table go faster
Matt, Very well done. Simple, elegant and fit for purpose. Onya mate !
@Badgerworkshop
10 ай бұрын
Thank you
Couldn't help but notice your thicknesses blades have a few nicks in them. Great work as usual
@Badgerworkshop
10 ай бұрын
Thank you
I see I'm not the only one who has put a few too many nails through their thicknesser 1:57 :D
@Badgerworkshop
10 ай бұрын
That’s the problem with pallet wood. I always miss one
@danludlam1562
10 ай бұрын
Ohhhh. I wondered what those lines were 😂
@detroutspinners9933
10 ай бұрын
Been there! Nothing worse than hearing that ‘ding’ followed by a line all the way down your board
@geoffreycoan
10 ай бұрын
I bought a hand-held ‘wand’ metal detector to check for nails in wood, the sort that metal detectors use. Bright orange as well so you can’t lose it in the workshop!
@kz.irudimen
10 ай бұрын
@@geoffreycoan I make things out of hardwood from old furniture all the time, I really need to buy one of those ...
Looking forward to find out what sort of templates you'll be making and all the stuff you will make with them!
@Badgerworkshop
10 ай бұрын
I have a few ideas already
Nice work Matt.
@Badgerworkshop
10 ай бұрын
Thank you
Hi Matt, thst was another great project, especially from old pallets, as for the colours, I am very pleased they were not your decision, your standard dark grey would have been perfect, bedt regards from a Kiwi living in Australia 👍👍👍👍👍
@Badgerworkshop
10 ай бұрын
Thank you.
Very nice looking printer. I have wondered if those types of printers would be cheaper to buy ink for them. Thanks Matt
@Badgerworkshop
10 ай бұрын
Thank you
I think you need to change your thicknesses blades - been there myself when you get nicks out of the blades leaving lines in the wood 😢
Nice job
@Badgerworkshop
10 ай бұрын
Thank you
I like it. A bit different .. but each to their own eh. Thks
@Badgerworkshop
10 ай бұрын
Thank you
Well, not really my style either but, hey very nice work. Especially liked the solution for connecting the leg pieces.
@Badgerworkshop
10 ай бұрын
Thank you very much
Hi Matt, not to every body's taste ,but well made and a good use of pallet wood ,take care mate
@Badgerworkshop
10 ай бұрын
Thank you
6:56 😳😂😂😂
You need to get new blades for your planer. It was very clear you’ve got nicks in them.
@hythewoodworkdesigns
10 ай бұрын
I agree. My Makita has the same problem, but nowhere near as bad. He just needs to swap them round
Another great video Matt, though your videos clearly show that Bosch dust extraction is next to useless! In my workshop I have a Festool Midi extractor and matching track saw, jig saw, router, sander etc which I bought because they have excellent dust extraction. When I use the same tools you are using in this video, I have no need to wear a dust mask, as all the dust is sucked up by the Midi and is not, like your Bosch, blasted out into the shed, where you are forced to wear a respirator. I appreciate that Bosch are your sponsors and you need to show their products whenever you can, but as your video quality is so good, I don't think you are doing them any favours!
What paper was that?
What's happened to your window blinds. I think your thicknesser blades need sharpening.
Awesome work, Matt! Nicely done! 😃 But yeah... Looks weird as heck! 😂 Stay safe there with your family! 🖖😊
Why did you not fill the exposed pallet nail holes? At least make look like half decent wood.
I don’t understand. You don’t appear to use any Festool or Woodpeckers tools. KZread has taught me that woodworking requires those items. Please explain. 😂
Was there any swearing at 13:14 ? 😂 😊
@Badgerworkshop
10 ай бұрын
There might have been
@alexnosheds
10 ай бұрын
@@Badgerworkshop hehehehehehe I bet. Hope the workbench has healed since then 😄
That. Is. Hideous
Always makes me laugh when you cut, sand or plane the smallest piece of wood, even if you’ve got the dust extraction on you still dress up like you’re about to decomtaminate Chernobyl.
I'm a fan and will be, but allow me to say that this is kind of a weird sponsorship... when I'm making something for friends or family, I just get the rough idea and go along with that, no need for printing stuff because I will make my own template with cardboard or my own stupid drawing skills; but no hard feelings Matt, still hope you' re not turning into a commercial channel like a lot these days
@dwalsh3469
10 ай бұрын
The man’s got to eat etc. 😇
In all truth reckon you wouldn’t pass as a cippy let alone a labourer👍🏻
Yeah, you’re right. It’s horrible.