Glad it helped explain your problem. Thanks for watching.

thanks Martin, you are always so helpful. you go above and beyond. many thanks

Great advice sir ! Thank you so much! I want to start in this field as a serious hobby but don't exactly know where to start... It becomes clearer !!

You've got my respect mate for this video, is not everyday that u come across guys like you trying to help basically others. My respect and thank you !

@reviewthat

9 жыл бұрын

Hey, sorin29asv, Thanks for your comment. Glad you got something from my vid. Cheers Martin

Top Man, Thanks im subbing and going thru ALL! i was about to purchase equipment but i knew someone can school me first!

Thanks, glad you enjoyed.

I still enjoy going back and rewatching your older videos just incase iv missed something ! just recently started doing sublimation on mugs everything going great cheers ,mark

@reviewthat

9 жыл бұрын

+abrahms2000 Hey, Nice one Mark. Good luck with the sublimation. Cheers Martin

Gracias Gracias Gracias por toda la informacion que compartiste te felicito!! me has ayudado muchisimo!!

Thanks Martin. Very clearly explained and very good tips! Keep up the good work man. thanks!

@reviewthat

10 жыл бұрын

Thanks for watching Ivo. Regards Martin

OUTSTANDING Video!! Very informative! I was debating between Print Screen and Heat Transfer, but YOU have convinced me that Heat Transfer is NOT inferior to Print Screens, especially when using the different types of transfer sheets!! THANX for the INFO, mannnn!!

@reviewthat

10 жыл бұрын

I'm glad it helped you make a decision.

This is a very help video. Thank you!

This is one of the best instructional videos I've seen on KZread. Very detailed and love the sample shirt you used.

@reviewthat

10 жыл бұрын

Thannks for your comment. Regards Martin

Well done , thanks mate , I was about to buy cheap one and end up losing money , really thank you for your great help and useful advices God bless

Love the vids and the way you are trying to help people...do you have a video about the different types of vinyls or could you make one explaining their effects and uses not to mention the pros and cons of the product...thanks again keep up the great work...

This video really helped me out. The heat press I bought was a generic brand from a reputable site, and I wasn't sure of the quality. I got a decent IR thermometer from Amazon, and checked it out. It actually runs 10-15 degrees hotter than the display says, but more than that, it's displaying in Fahrenheit instead of Celsius as the unit implies! I'm glad I verified before I started printing things, this video and that thermometer probably saved me a ton of money in lost transfers and shirts!

@reviewthat

10 жыл бұрын

That's why I made this video Luke. When I had similar problems when I started, no one on forums was prepared to give this answer so I found it out myself. Good luck. Martin

Hi Martin, thinking about starting a T Shirt business, bit worried that the market is now saturated, however your video was good, and I appreciate you have to get the right machine. Cheers Alan

honestly thanks to your video knowledge I'm excited and decided to start my own journey in the t-shirt business, thank you!!!!!

@reviewthat

8 жыл бұрын

+Ramon Serna Jr HI Ramon, That's great. Good luck bud. Cheers Martin

Excelente!! gracias por compartir todos tus conocimientos!! saludos

Cool! I don't know how I ran into this video, but it was interesting. My friend wants to get into this and I wanted to see how it was done. You are definitely right. You do not need a large machine. I like more steps, so I'd rather save money and buy the hat press instead of the larger shirt press - if I was doing just a small logo. I like putting more work into something, so I'd actually prefer the more difficult approach (hat press) .

@reviewthat

9 жыл бұрын

Yes, A hat press can be used for smaller transfers or vinyl's for either sleeves or breast logo's. Thanks for watching

Thank you so much for sharing this information.

I'm seeing someone for a used heat press this evening and I'm certainly bringing my IR thermometer after seeing this video. Thanks!

@reviewthat

6 жыл бұрын

Yes, good idea, You'll be surprised how many heat presses are not up to the job. Cheers Martin

thanx man what you had explain make a lot a sense. i have the same problem you had mention about uneven heating so am now going to get me a heat gun for testing my heat press since i cant afford to buy a much expensive one. thanx man good video.

Thank you, Martin! Very informative and entertaining as always :)

@reviewthat

8 жыл бұрын

+sam odono Thanks for watching Sam. Cheers Martin

I loved this video, very informative. Now I'm ready to buy my first machine! Thank you

@reviewthat

8 жыл бұрын

+Loyal_Libra_83 Hey, thanks for watching. Good luck. Cheers Martin

thanks for your comment.

Thx you again just got a heat press hope it work going to try later following your suggestions

@reviewthat

7 жыл бұрын

Hey Shirley good luck, hope it goes well.

Great video David....informal, informative not pretentious...

Martin a lot of videos on youtube on shirt making but always try to find yours ! Yours are always the best ! thanks for so much info ! trying to get my business up and going hope to have a successful try at it !

@reviewthat

10 жыл бұрын

Good luck with your venture and thanks for your comment.

Thank you Martin, very kind of you and very informative!

@reviewthat

9 жыл бұрын

Glad you got something from the video. Regards Martin

Excellent tutorial, thanks very much!

Thanks for your video is very helpful.

thanks for sharing your knowledge. Very helpful!

@reviewthat

8 жыл бұрын

+A Marquez Hey, thanks for watching and glad you enjoyed the vid. Cheers Martin

omg after soild 4 hrs of looking on youtube for these heat press you sir seem to be thee best on youtube your clear i can understand you video is vary vary well done if i could like this vid more then once i would Great Job please keep it up.

@reviewthat

9 жыл бұрын

corey diev Hey, thanks for your comment. Cheers Martin

Hi Stephen, I will get round to it. Cheers Martin

Thank You for the great advice :)

Thank you for your advice and knowledge

@reviewthat

4 жыл бұрын

My pleasure

Very helpful! Thank for doing this Video! :)

really informative mate thanks for taking the time out

Awch its a good thing i watched the video over again, as i missed out on the second hand machine advice.....Good job Martin...

@reviewthat

7 жыл бұрын

Well done.It's easy to miss something. Cheers Martin

great video!! you the man!! thanks..can you guide me to a vid of yours on printers and how i get to print on the vinyls if you have one?? will look now but incase you get there before me..thanks again

@darwinmarquez7601

10 жыл бұрын

I have the same request

You are a genius I'm trying to start my business and I'm looking for videos to help me learn what to do or what I need and you were very helpful thank you

@reviewthat

10 жыл бұрын

Thanks for your comment

Very helpful, thanks!

Thanks for this! I'm planning on starting up my own little business online and maybe my own little shop in the future. I've been doing stencils and silhouette type work and this is something that would fit in so well!

@reviewthat

8 жыл бұрын

+Asherz Smith Nice one bud. Good luck with your venture

@AsherzSmith

8 жыл бұрын

Thank you! You've got yourself a new subscriber! :)

@reviewthat

8 жыл бұрын

Asherz Smith Nice one Asherz, all the best. Martin

thank you im from daytona where gift shops and head shops sell local branded shirts this helped me alot

awesome advice.. can you suggest any brands of those machines to get started? thank you so much ser..

Thanx for your reply.

Thanks for taking the time to explain about what makes a good heat press and showing the more cheaper alternative. :)

@reviewthat

8 жыл бұрын

+Janelle Macpherson Hey Janelle, thanks for watching, you should check out my other vids as well. Cheers Martin

@janellekm

8 жыл бұрын

Hi Martin, I will do , as I want to start doing tshirt and other stuff. :)

Well put! Thank you

@reviewthat

7 жыл бұрын

Thanks for watching. Cheers Martin

Helpful advice! Thanks mate

@reviewthat

10 жыл бұрын

No problem. This is the biggest reason for transfers failing.

Fab video! Really helped. Any brands you recommend likea in-between price range? 😅

you are the man...... is really good presentation.

Simon, check out the link in the description for my training dvd with all the info needed. Regards

thank you very much for the video it was very informative.

Wow thank you for all of that info

@reviewthat

8 жыл бұрын

+indamind ofmcgurk Thanks for watching bud. Cheers Martin

Thanks for sharing Mate! What model of Plotter Cutter do you have and do you recommend it?

Good information to know, thanks.

@reviewthat

8 жыл бұрын

It's where most people fail. Cheers Martin

Thanks for the video. I have purchased an ebay press for about $200 US dollars. (i'm in usa) I purchased it strictly for my Airbrushing shirts to heat set the shirts. I heat set them 3-4 times, going around the shirt board. It works GREAT for that..... not so much for transfers. I ordered a small batch and used my press and I have YET to have a successful peel out of 8 so far. DO NOT SKIMP On a press if you're doing transfers!!

@reviewthat

10 жыл бұрын

That's correct. A cheap press is no good for transfers but it is ok for curing inks. good comment.

Thanks for sharing some of your knowledge, Saved me from buying cheap rubbish.

@reviewthat

8 жыл бұрын

+dumptonpark No problem bud. my first press was rubbish and a waste of money and I had to find out myself. Cheers Martin

@TheSnookthakrook

8 жыл бұрын

+Martin Butler whats a good brand and which is. a bad brand

@reviewthat

8 жыл бұрын

If a press has a name, you can Google it for reviews. If it has no name, You can not see reviews so I wouldn't buy one with no reviews. Cheers Martin

@TheSnookthakrook

8 жыл бұрын

+Martin Butler oh ok thanks

Great video 👍

Glad it helped. This is why most people who buy cheap heat presses give up because they can't get consistant professional results. A deicent press sorts this out. Regards Martin

thanks your video was super helpful

@reviewthat

8 жыл бұрын

+Daniel Impala Glad it helped. Cheers Martin

Thanks very much. What heat press is that? which would you reccommend?

what make/model is your heat press??

Hi thanz for the video! By the way just how loud is the clicking noise when you clamp the press?

Thank you!!!!

Great video! can I ask a question? can I use a normal print with normal paper and ink instead to use the vinyl paper to make t shirt?

What a inspiration. Thanks for your time in making this video. Well done! What brand in your presses?

@retrorestore

7 жыл бұрын

Thank you, I was using a Stahl Hotronix (great press) but now have a Galaxy DP100 16x20 auto slide. Cheers Martin

i did. the link is in the description.

Thanks a lot I'm trying to go in the t-shirt business myself

@reviewthat

10 жыл бұрын

Good luck. Hope you enjoyed the video.

Nice one Martin. Learned loads there :)

@reviewthat

9 жыл бұрын

Thanks for watching and glad you got something from his vid. Cheers Martin

I agree, this video stopped me from making a mistake... thanks mate.

@sabirdebabsia2260

4 жыл бұрын

Hi bro ur work is good

Good, thank you!!

@reviewthat

7 жыл бұрын

Thanks for watching.

hi ian, i don't use facebook to promote any business, just to keep in touch with people i know. good luck with your t shirt printing business.

Very useful x

I wish I would have watched your video before purchasing my heat press! I just ordered a Iglobalbuy 8in1 T-shirt Digital Heat Press Machine Transfer Sublimation Hat Mug Cap Plate 15" X 12"- still hasn't arrived yet. But I will definitely be getting a temperature gun to test it out! Thank you for your information!

@reviewthat

8 жыл бұрын

+Carol Anne McGuire Hi Carol Hope yours is the exception to the rule. Check out my other vids in my channel. Cheers Martin

@carolannemcguire6104

8 жыл бұрын

+Martin Butler Wow! You're fast at responding! I'm actually watching your video now with Sharon! This is my first heat press- I'm purchasing it for my new business- trying out a new thing! :) I've already bookmarked all of your videos. I will be doing marathon watching today!

@reviewthat

8 жыл бұрын

Carol Anne McGuire Haha, enjoy. Cheers Martin

kool...so whats the difference between the black hotronix maxx and the silver one..besides the price

I love your wallpaper!!!

@reviewthat

9 жыл бұрын

Lindsay Laurece Haha, it needs redecorating lol. Cheers Martin

Hi Martin, thanks for the video. What type of transfer paper do you find the best?

thx for helping me not make the same mistake. Great video!!

great information, thanks! can you please tell me the song in the background? It's lovely :)

What printer are you using / do you recommend ? Epson WF-7015 any good ? Very informative video, I like your style

@reviewthat

10 жыл бұрын

I don't know but it should be fine. Check on ebay if they do a ciss system for it to keep costs down.

Thanks for that, i'm using the same printer as you so all should be good, thanks again

Hey, great vid, but where can I buy good quality transfer paper at a decent price in UK?

Great video! So, what brand heat press are you using here?

Your video has explained my problem with my heat press, I wish I found your video before buying the one on ebay :\ Thank you!

Verry good explanation -> new subscriber now

Awesome video, so professional...You should make a DVD....

great vid

Martin Butler Hi, thanks for the video, it was very informative :). I was wondering if you would be able to offer any advice for a slightly more affordable heat press for a tighter budget, im wanting to get into printing clothing, i have around 800 to spare and it would be really useful to know how much other equipment will cost such as a printer, different transfer papers to get set up properly and so on. Any advice would be greatly appreciated, thankyou :)

Thanx

Hi Martin,i have a question,i recently bought a heat press to get me started,(from a branded shop) and have done a few tester heatups so i can see how it does with even heat..i set it at 175 and once it reached temp, (according to the digital clock) i tested with the gun ,the centre read 197 and most edges read 206.......,now this was heating up with it open , to me this seems a huge differ ...so would this be classed as not calibrated properly and should be replaced?.........thank you ..ps thank you so much to you both for doing these videos....i am inspired greatly...Rara

thank u so much

Thanks sir

@reviewthat

9 жыл бұрын

Hey, thanks for watching Luke. Cheers Martin

Yes mate! Love your video mate. You're a top bloke! I'm really trying to get up and going with my own business but being quoted silly prices for all my needs. I'd rather do it all myself. I got a few questions. Is there a way we can chat. You sound like your a London fella. I'm too in London. I hope to hear from you soon pal.

@reviewthat

9 жыл бұрын

HI, You should check out my training dvd as you'll get email support with that. I answer all the questions you might have to start up in this biz as I show you what I do and the equipment I use. check out ukinternetmarketingschool.com/my-products/t-shirt-transfer-printing-training-dvd/ Cheers Martin

Thanks for the tutorial it's awesome, May I ask what type of printer is used in heat printing ? Thanks

@reviewthat

7 жыл бұрын

Check out my other vids bud for more answers

@TheLasVegasLocal

6 жыл бұрын

sub to my channel I will give answers plus my channel has tutorials and ann entertainment value

My training dvd ink is in the description. Regards

cheers martin! love your work. just wondering what sort of heat tape do you recommend?

@reviewthat

6 жыл бұрын

we just use one from Ebay.

Hi Martin..I truly appreciate and enjoy your information/videos..can you direct me in which brand of transfer paper to use..I want to avoid the bad cheap stuff..thank you

@reviewthat

8 жыл бұрын

+Keisha Timmons I give all my materials info in my training dvd. There's a link to it in the description. Cheers Martin

Hi, Martin, Great vid! i wanna ask you that what brand is your heat press and where can I get the transfer papers? Thank you! Ryan

I was lucky Martin. I just picked up a stahls basic clam press for £200 and the guy was decent enough to give me a nearly full box of polyprint texjet protective paper the Stahls is a beast done a few checks and your right the Chinese ones are crap. I guess I'm just plain lucky with my bargain of the year today and it's a 40 x 50 platen as well :)

@reviewthat

7 жыл бұрын

What a lucky chap you are Tony, a great price. Good find. Cheers Martin