"2.8 v6, don't wanna hurt anyone's feelings but let's be honest, they're worthless" Thank-you for acknowledging this. An LS swap is most certainly a gift for this truck
@rickkoch83162 ай бұрын
It’s Dexs honesty and realness why I keep coming back, hell I don’t even have an XJ anymore. Have a good holiday weekend!
@caseyb652 ай бұрын
Dex I gotta say, it’s incredible that this channel has grown this fast, been here since you just had a couple thousand subscribers and happy to see you still committing to it😊
@Randomgearhead2 ай бұрын
If u cut the front cross member out a zj will fit in between the rails. Will have to notch the upper support for the cap. Then remake a cross member from tube steel behind rad
@MonkeyUnderdahood2 ай бұрын
Only thing I can actually sit down and just watch🙌always end up learning sum
@chrisyork7782 ай бұрын
Dex been watching you for a couple months as a full on toyota guy, I really enjoy your content and honest opinions of everything. Nobody make a perfect vehicle but we still love which ever make we go with
@RobertRecite2 ай бұрын
I built a 5.3 Comanche with a 4l60e drove it from Florida to San Diego California to pickup a car, towed it back to Florida 5k miles in a week was a very solid truck!
@cdub1662 ай бұрын
I've found motor mounts for an LS (L33 baby!) swap much cheaper than Novak. Unfortunately EVERYONE wants over $500 for a 4L60e -> np231 adapter kit, with Novak being the most expensive. Advance Adapters and others are about $100 cheaper if I remember correctly. That's who I'd go with out of all the $100 cheaper group. Got my SYE from them like everyone else, so I trust their workmanship. I'm extremely hopefully I'll have my XJ swap done by the end of next summer. The project is imminently starting this fall, barring any catastrophes or unexpected large expenses.
@nickmanwebb142 ай бұрын
I saw the title and I ain't never liked a video so fast, lol. I've been waiting on this since your first video asking for content ideas.
@russellweber4334Ай бұрын
I had a 1988 short bed Jeep Comanche with a 4.0 engine and a automatic tranny with a drive shaft disconnect. The front end was different than the 1 in the video. It had shocks, coil springs and mcpherson struts.
@tidestacker467427 күн бұрын
I had a LS 53 in chev truck gave to my grandson, very good motor
@kennethrine81712 ай бұрын
This is going to be a Great Truck. Thank you for the video. I really like them
@nolanivy56932 ай бұрын
Love your channel brother keep it going your doing good things
@carykennedy946722 күн бұрын
She gonna be a ripper. Hang on and look out. 🏁
@jimmyjckjones2 ай бұрын
Been wondering about this project. Very cool.
@Ruckusism2 ай бұрын
Can't wait to see more hope to see you hit 100k soon .
@MechanicalMafioso2 ай бұрын
Gotta old XJ wagoner that had a 2.8, currently doing an LS swap In it myself. Those 2.8’s were junk in jeeps. Got all the parts from Novak Conversions. Corvette/Camaro/Firebird accessory drive/water pumps work. Move the engine as far back as you can…. ICT Billet is a good place for the accessory brackets. My final iteration might use a Holley EFI, just going to use the OEM ECU to save some money initially. All the Novak stuff, the Long arm kit I got, the Iron Rock off road subframe reinforcement kit etc etc. definitely adds up. I spent the money on suspension and drivetrain first. I can upgrade the EFI/ECU and harness later. 🤷♂️
@Dmowery50362 ай бұрын
Gonna be another interesting build! Heck yeah!! 👍🏻👍🏻
@boostedzjadventurevlogs41212 ай бұрын
If you check out the 2wd autocross xj, they notched the front axle for oil pan clearance.
@Twistedxj302 ай бұрын
Overkill by Designs has adjustable Ls motor mounts... Another option for ya.. 👍
@danieljohnson84372 ай бұрын
Beautiful Shop.Dex.
@hallwest96502 ай бұрын
4.3 LS V6 would be awesome
@josephhudolin9332 ай бұрын
U can use a factory 4.0 radiater and 160 degree thermostat and dual electric fans min stays at 185 cruising sitting gets to 210
@billgeorge11422 ай бұрын
I entertained this thought, and I'd like to do this myself. Good job. I'll keep up with this build
@papatomsthoughts2 ай бұрын
Dex, stop worrying about how you record. We love what you do, the fact that you are near 75,000 followers says a lot.
@brandongoodwin98122 ай бұрын
Dex man do u have any other comanches for sale I got a 96 wrangler with 3/4 Chevy axles and 38" super swampers I wanna build a Comanche trail rig
@thelonewrangler10082 ай бұрын
My favorite part is how you picked the jeep with the least amount of weight on the rear wheels to stuff that big a55 motor in. It wasnt the ķung floo or strep, it was RSV, and it ran up and down the eastcoast a few months ago. Trust me, your AI daddy is always right🤘🇺🇲
@damionrichter2 ай бұрын
NOVAK LOOKS GOOD AND THE BOLTS A ALINGMENT DOWL BOLT
@albertliverman25722 ай бұрын
My friend used a mazda rad for ls swap in his toyota.also he used a gto oil pan and a corvette water pump.just some info
@SR-jz9wn2 ай бұрын
Why not go with a stock fuel injection system? All available at the wrecker and programming the pcm is a breeze with free ls-droid and free TunerPro software. All you need is a computer and a $90 odxpro OBD2 dongle. Super-friendly community and there are tons of tunes out there to experiment with. $2k for a holley system seems like a waste of money.
@torhne
2 ай бұрын
Yep yep, came here to say this! Tech2 compatibility with the OBDX Pro GT is awesome for the people with Chevy/GMC products for all the BCM programming. Get a spare laptop or run a VM :)
@damionrichter2 ай бұрын
THANKS DEX ITS A GEM
@stevenblumke26932 ай бұрын
Great video hack job!
@e.s.3599Ай бұрын
Looking like Jack Harlow's long lost older brother
@beckybird53672 ай бұрын
Can't wait to see the end project. What happend to your little 🐕
@pdizzle_17762 ай бұрын
That poor neglected can of Dr.Pepper, didn't even get drank cold
@31rd0nit2 ай бұрын
Let's 4.0 a corvette... f the haters.
@oogabooga23272 ай бұрын
Keep making videos brother!!!!!
@TheEpitohmАй бұрын
Hey man, I just put together a lowered 2wd MJ with a 5.3 last year. I would avoid most of the overpriced novak stuff. Motor mounts are a good deal, but the rest is wild. I found much better deals elsewhere. 700 for headers is insane! Mine were just a couple hundo. Hit me up if you want links to parts, I kept a spreadsheet.
@jak39732 ай бұрын
Get a carb setup for that ls save some money from trying to put fuel injection back on it
@ericferguson52312 ай бұрын
Thank you for the video.
@tylerkinnamon87142 ай бұрын
Road to 100k
@AJSilva-rj7xk2 ай бұрын
That’s going to be nice
@michaeleast51802 ай бұрын
I need a AW4 zj swap.
@brandonzeiders52732 ай бұрын
Now I haven't finished the video yet. So I'm hoping you will at least turn this beast into 4x4. I don't think it will look good slammed
@patricsturm54732 ай бұрын
If you have any question ask Dom Stacks ( i think his name is anyways)
@carykennedy946722 күн бұрын
Can you give the skinny on your engine hoist pump please
@jeremyhanna38522 ай бұрын
So do you are the Interior dimensions for the front seat the same as an xj like lrg room distam5 between steering wheel and seat etc my 6' 10 400lbs i can drive a four foor xj ok would love a truck just not sure i would fit
@danhambrick63312 ай бұрын
What the hell Dex.You hear of guys on the internet doing LS swaps for $500.I dont get it.😆😆
@damionrichter2 ай бұрын
GET HP TUNERS YOU CAN TUNESTOCK GM PCMS BRO
@dandy23402 ай бұрын
I need you to fix my jeep 😂
@nathanmccumber8965
2 ай бұрын
What's wrong with it
@stylze57672 ай бұрын
Bro just casually has 25k in comanche yes in non running condition no matter what combination of engine and 4x4 or 2x4 they are they go for 4k where i live. No matter the condition
@hsbbeicysbve2 ай бұрын
Does this dude never respond to any comments?
@LegendCampbell2 ай бұрын
👄
@brianandglendaharkin94572 ай бұрын
STOP 🛑 WATCHING once I heard it’s GM LS 👎
@seannailor93292 ай бұрын
Should have done a 5.9 from a grand Cherokee. Ls motors are over rated everyone has them be different
Пікірлер: 58
"2.8 v6, don't wanna hurt anyone's feelings but let's be honest, they're worthless" Thank-you for acknowledging this. An LS swap is most certainly a gift for this truck
It’s Dexs honesty and realness why I keep coming back, hell I don’t even have an XJ anymore. Have a good holiday weekend!
Dex I gotta say, it’s incredible that this channel has grown this fast, been here since you just had a couple thousand subscribers and happy to see you still committing to it😊
If u cut the front cross member out a zj will fit in between the rails. Will have to notch the upper support for the cap. Then remake a cross member from tube steel behind rad
Only thing I can actually sit down and just watch🙌always end up learning sum
Dex been watching you for a couple months as a full on toyota guy, I really enjoy your content and honest opinions of everything. Nobody make a perfect vehicle but we still love which ever make we go with
I built a 5.3 Comanche with a 4l60e drove it from Florida to San Diego California to pickup a car, towed it back to Florida 5k miles in a week was a very solid truck!
I've found motor mounts for an LS (L33 baby!) swap much cheaper than Novak. Unfortunately EVERYONE wants over $500 for a 4L60e -> np231 adapter kit, with Novak being the most expensive. Advance Adapters and others are about $100 cheaper if I remember correctly. That's who I'd go with out of all the $100 cheaper group. Got my SYE from them like everyone else, so I trust their workmanship. I'm extremely hopefully I'll have my XJ swap done by the end of next summer. The project is imminently starting this fall, barring any catastrophes or unexpected large expenses.
I saw the title and I ain't never liked a video so fast, lol. I've been waiting on this since your first video asking for content ideas.
I had a 1988 short bed Jeep Comanche with a 4.0 engine and a automatic tranny with a drive shaft disconnect. The front end was different than the 1 in the video. It had shocks, coil springs and mcpherson struts.
I had a LS 53 in chev truck gave to my grandson, very good motor
This is going to be a Great Truck. Thank you for the video. I really like them
Love your channel brother keep it going your doing good things
She gonna be a ripper. Hang on and look out. 🏁
Been wondering about this project. Very cool.
Can't wait to see more hope to see you hit 100k soon .
Gotta old XJ wagoner that had a 2.8, currently doing an LS swap In it myself. Those 2.8’s were junk in jeeps. Got all the parts from Novak Conversions. Corvette/Camaro/Firebird accessory drive/water pumps work. Move the engine as far back as you can…. ICT Billet is a good place for the accessory brackets. My final iteration might use a Holley EFI, just going to use the OEM ECU to save some money initially. All the Novak stuff, the Long arm kit I got, the Iron Rock off road subframe reinforcement kit etc etc. definitely adds up. I spent the money on suspension and drivetrain first. I can upgrade the EFI/ECU and harness later. 🤷♂️
Gonna be another interesting build! Heck yeah!! 👍🏻👍🏻
If you check out the 2wd autocross xj, they notched the front axle for oil pan clearance.
Overkill by Designs has adjustable Ls motor mounts... Another option for ya.. 👍
Beautiful Shop.Dex.
4.3 LS V6 would be awesome
U can use a factory 4.0 radiater and 160 degree thermostat and dual electric fans min stays at 185 cruising sitting gets to 210
I entertained this thought, and I'd like to do this myself. Good job. I'll keep up with this build
Dex, stop worrying about how you record. We love what you do, the fact that you are near 75,000 followers says a lot.
Dex man do u have any other comanches for sale I got a 96 wrangler with 3/4 Chevy axles and 38" super swampers I wanna build a Comanche trail rig
My favorite part is how you picked the jeep with the least amount of weight on the rear wheels to stuff that big a55 motor in. It wasnt the ķung floo or strep, it was RSV, and it ran up and down the eastcoast a few months ago. Trust me, your AI daddy is always right🤘🇺🇲
NOVAK LOOKS GOOD AND THE BOLTS A ALINGMENT DOWL BOLT
My friend used a mazda rad for ls swap in his toyota.also he used a gto oil pan and a corvette water pump.just some info
Why not go with a stock fuel injection system? All available at the wrecker and programming the pcm is a breeze with free ls-droid and free TunerPro software. All you need is a computer and a $90 odxpro OBD2 dongle. Super-friendly community and there are tons of tunes out there to experiment with. $2k for a holley system seems like a waste of money.
@torhne
2 ай бұрын
Yep yep, came here to say this! Tech2 compatibility with the OBDX Pro GT is awesome for the people with Chevy/GMC products for all the BCM programming. Get a spare laptop or run a VM :)
THANKS DEX ITS A GEM
Great video hack job!
Looking like Jack Harlow's long lost older brother
Can't wait to see the end project. What happend to your little 🐕
That poor neglected can of Dr.Pepper, didn't even get drank cold
Let's 4.0 a corvette... f the haters.
Keep making videos brother!!!!!
Hey man, I just put together a lowered 2wd MJ with a 5.3 last year. I would avoid most of the overpriced novak stuff. Motor mounts are a good deal, but the rest is wild. I found much better deals elsewhere. 700 for headers is insane! Mine were just a couple hundo. Hit me up if you want links to parts, I kept a spreadsheet.
Get a carb setup for that ls save some money from trying to put fuel injection back on it
Thank you for the video.
Road to 100k
That’s going to be nice
I need a AW4 zj swap.
Now I haven't finished the video yet. So I'm hoping you will at least turn this beast into 4x4. I don't think it will look good slammed
If you have any question ask Dom Stacks ( i think his name is anyways)
Can you give the skinny on your engine hoist pump please
So do you are the Interior dimensions for the front seat the same as an xj like lrg room distam5 between steering wheel and seat etc my 6' 10 400lbs i can drive a four foor xj ok would love a truck just not sure i would fit
What the hell Dex.You hear of guys on the internet doing LS swaps for $500.I dont get it.😆😆
GET HP TUNERS YOU CAN TUNESTOCK GM PCMS BRO
I need you to fix my jeep 😂
@nathanmccumber8965
2 ай бұрын
What's wrong with it
Bro just casually has 25k in comanche yes in non running condition no matter what combination of engine and 4x4 or 2x4 they are they go for 4k where i live. No matter the condition
Does this dude never respond to any comments?
👄
STOP 🛑 WATCHING once I heard it’s GM LS 👎
Should have done a 5.9 from a grand Cherokee. Ls motors are over rated everyone has them be different