All your SX4 videos have been very helpful thank you

Very nice guy last month changed the brake pads on my sx4 very easy. Learning with you. Thank you

Very nicely done! I have a 2008 SX4 that needs the pads and rotors re-done. Very good video. Thanks for sharing this!

@volvosweden

8 жыл бұрын

Glad it helps people. really easy job. good luck

I enjoy your very easy to follow videos. Good job!

It’s a good idea to clean everything with brake cleaner before lubricating and reassembling. Torque specs are also important. Thanks for sharing!

Thanks for the great video! Makes life a lot easier. Thanks again

Спасибо еще раз! Хотелось бы увидеть замену тормозной жидкости полностью. Спасибо

Great video!! Comprehensive, well shot video and informative descriptions, will help a great deal with maintaining mine :-)

Fantastic video, , tells me all I have to know, many thanks

keep the videos coming grate job

Excellent Video - very well done !

many thanks !! i have a sx 4 !!!! your video are very interesting for me !!!

Хороший ролик , поучительный, на двух языках, с правильным освещением и углом съемки и.... без сумасшедшей музыки.

The best videos! I've done so much on my sx4 with these videos. Thank you!

Great easy to follow video 👍

Thanks, this video helped me.

Nice gold ratchet bud! great job on the brakes! :)

Фраза: "У тебя же руки!" - позабавила.

Nice job! Why didn't you use a torque wrench to tighten these screws though?

A good video. Just remember to have brake cleaner spray handy. He was using the same gloves to spread anti-seize and molly grease to push against the rotors, and you can see that he left greasy finger prints on the braking surface. Use the brake cleaner to get those finger prints off before installing the pads. Very useful video!

@volvosweden

7 жыл бұрын

+dtes99 Thx

@garrynutter860

5 жыл бұрын

And a torque wrench.

thank you for the video!

Thanks, great video. Fast explanation and the tedious stuff fast forwarded. Cheers!

I know what I'm doing Saturday now !

Good job, thank you

Love your accent ❤

Hey volvosweden you're always helping me a lot! keep uploading SX4's manteinance videos please! Nice attitude dude! Just for curiosity, how many Kilometers you have in your SX4? did you already changed his front or rear shockers? with how many kilometers? thanks again! cheers from Brazil.

@volvosweden

9 жыл бұрын

Rear shocks are original at 200,001km today. Front shocks I replaced by mistake with used ones from a damaged low km sx4. I will post a video if I ever do the shocks.

holy cow , you sudenly grew two extra arms !!

that's very helpful

Nice video thanks

bravo fai dei bellissimi filmati complinenti

Подскажите заводские номера дисков АТЕ которые вы здесь взяли на замену?

How do you know if the rotors need changing and not just the pads?

Video educativo , excelente

Just a tip: put a lug nut back on the hub to hold the rotor down while you work. Also, you could install the brake pads back on the bracket first and then install the whole assembly.

привет,подскажи какой артикул дисков тормозных

Do the scooped profiled rotors have a name please? My UK 2013 model has a worn pads warning lamp indicator in the instrument cluster. A Mechanic told me it only applies for the front discs & not the rear ones. On a previous a SX4 l had the front replacement pads seemed to last longer than the OMEs. SX4 v Suduci - which do you think is best please?

Do you have part numbers for the rotors? I can't seem to find them.

so how do you like the ATC rotors ? where did you buy them , canadiantire ?

Many thanks, especially for the removaL of the coils without disconnecting them from their cables, and also for the great tip of using them as plug grabbers. I just disagreed with dropping the new spark plugs into the holes, as the ceramic part could crack and the socket spanner may not be easy to align them with the cylinder head threads. I'd use the socket spanner to gently lower them in and start the hand-screwing.

Parabéns pelo vídeo. muito necessário.

How can I tell when the pads need to be replaced? Also, should the pads and roars always be replaced together? Excellent Video!!!

Replaced mine on Sunday 23rd April 2023 discs and shoe Suzuki wagon r 2002

Boss can't thank enough for this! I too have to change all four of mine on my sk4 can you please verify the size rotar for both front and back? I'm looking to purchase and maybe change myself but really want to make sure I'm buying the right sizes to fit both front and back. Again your videos have been very helpful!🙏🏾🍻

Just got a Suzuki SX4 2008 is a great car. How much you paid for all those parts ?

What size G clamp do i need to compress the brake cylinder?

gooood vedio man toooop thanks

Does anybody know torque specs for Suzuki SX4 AWD front breaks?

Хорошее произношение, автор в англоговорящей стране жил кмк

What are the torque values for those bolts?

Nice

I hope that Suzuki Liana maintenance exposure

Great tutorial. Do you have a video how to tap a wire from 12V?

@volvosweden

2 жыл бұрын

Nope

Nice job - excellent video. But use a torque wrench? It would take less than a minute to switch and do the job right.

where is the right point for lift up the car with hydraulic trolley jack? where is the right point for put the jack stand? thank you

GOOD VIDEO THANKS MAN...

What is the diameter of allen bolts;

Hello! Nice video! May I ask you where (exactly) to put floor jack and jack stands on Sx4? Dont you have an photo or drawing? Many thanks! :-)

@volvosweden

8 жыл бұрын

email me at yuriyermilov@gmail.com I will take a photo for you.

you didn't lube the sliders. common problem on my suzuki liana that uses sames brakes is 1 of the sliders is sticky and does not compress/expand freely, both sliders need to have their slider boots cleaned and re-lubed. +1 points thought for being the first youtuber to actually show and mention anything about opening the brake fluid reservoir in the engine bay and putting the rag around it.. once you start pushing the piston back into place the fluid level wil ltypically rise. I have not seen anyone else mention this basic check that should alsways be done

Hi! Don't know if you're going to look at this post, the only thing I want to know is if the lug nuts are the same for steel wheels and alloy mag wheels. I changed my front brakes, and disk, and, in the same time, put back the summer tires on mag wheels, but the lug nuts seems a little small and rusty. Btw, I bought this Suzuki SX4 2007 a couple of days ago, and it seems that this car is quite what I was looking for for a long time. And for the mag wheels, it's that I dont want to put too much pressure on lug nuts and break the mag wheels. Thanks in advance.

@volvosweden

7 жыл бұрын

+DigiPal They should fit both rims.

@DigiPal

7 жыл бұрын

Ok, thanks very much.

hi. do you know a site where I can get new or used fog lights for my 2010 sx4 hatchback? thanks.

@volvosweden

7 жыл бұрын

+quiambaomc Dealer or Ebay. Maybe local wreck yard.

А направляющие почему не смазал ?

Hi Great video as always. Do you have the page regarding the width of discs? Any chance you can send me the manual? Thank you!

@volvosweden

5 жыл бұрын

Does the link work? www.dropbox.com/s/4yzzstg0h19uy3a/RW420.pdf?dl=0&m=

Щетками надо чистить,потом смазывать!

Do you need to add more brake fluid after some spills out from the reservoir?

@missfixitCanada

4 жыл бұрын

Keelan Bozman after you do both sides of the car pump the brakes a few times to get the piston back to the right spot, then check your fluid level. It’ll most likely be low. I’d top up after checking that.

Yuri, is the process any different for rear brakes? I have a 2011 and it’s got disc brakes in the back as well. Does the parking brake get affected when you do the rear brakes?

@33billbert

3 жыл бұрын

Take parking brake off when you do it. After its all done, turn the car on (maybe chock the wheels), pump the brakes, put it in neutral, pump the brakes till they fine and then pull the hand brake up a few times until you feel it return to normal.

@missfixitCanada

3 жыл бұрын

@@33billbert thank you!

do you know how to replace a stripped wheel stud from a 2009 Suzuki SX4?

@volvosweden

6 жыл бұрын

Did this once. Hummer it out. The new one needs a bit of trimming to clear the axle from the back. Not fun to do.

brakes not worn out, middle cut it for dust

Hi this is ate power discs ? Can we use sx4 s-cross 2013 and what is the OEM number ? Thanks for help

@volvosweden

5 жыл бұрын

I cant answer. Need to ask the store.

На 6:18 Помошник команду "Open!" не понял пришлось перейди на родной язык ). "Открывай" уже легче. Судя по акценту наши люди. Зачем было на английском делать?

Why don't put The vine on The disk?

Спасибо за видео , а можно номера запчастей , которые установили выложить.

@alonaolen

9 жыл бұрын

все выкинул. но покупаю здесь www.rockauto.com

@konstantinsemyakin9692

9 жыл бұрын

alona olender Отлично , посмотрим:)

nice...but i have heard that those rotors are not very good..just from comments online..what made u choose those ones .beside the price

@volvosweden

9 жыл бұрын

Well. Its my work car so price was the biggest factor. I must say the brakes are really good, even my wife noticed.

@lexusfan100

9 жыл бұрын

volvosweden cool.ya i recently changed pads and rotors on the Lexus and i went with ThermoQuiet Wagner products and been very happy with it . just wait for long term test

Перевод, можно....

Ни винтиков не было, которыми диски к ступице крепятся, ни направляющих колодок новых... А ржавчину почему не счистили? Направляющие суппортов тоже почистить и смазать не мешало бы.

@gunsforum

2 жыл бұрын

Винтики на венгерской сборке идут.

Mi Suzuki se apago coriendo y no prende

do not use air gun on small bolts, turns too fast will strip threads, wobbles due to the gun hurts threads

OXO cubes!

Hello volvosweden. Catalog number of brake disks?. The one below CW22252

lubricate without cleaning before, and the use of a torque ?? that bad...???

Спасибо за инфу! Ну и на русском языке лучше звучит!😀

Мои друзья, где я могу найти Digital / Жесткий копию Руководство по техническому обслуживанию / ремонту на 2013 год SX4 Crossover CVT?

@volvosweden

8 жыл бұрын

У меня есть. Кинь свой email. Я только не уверен что там на CVT.

@my4re

8 жыл бұрын

My4re@yahoo.com = My Ferrari LMAO

@vrnleaguefpvdronerace9345

5 жыл бұрын

Кинь мне на почту брат руководство 89601350006@mail.ru и каталожные номера дисков.

Brand of rotors?

@volvosweden

6 жыл бұрын

+jon kenny ate

Shit dude you could have gotten another 200,000 miles out of those pads!

Диск прикрутить,не судьба?