You're doing so much for SX4 owners all over the world. Please keep making videos like this!
@theblazzed21144 жыл бұрын
-Now let`s make an alignment.... -I don`t think so. :D made my day Russion style
@shelbychartier57158 жыл бұрын
dont forget at the end of this video to tighten that nut to the tie rod end you should have your wrench on the nut and one on the little slots on the tie rod also.
@DieselCaldwell8 жыл бұрын
Thank you so much! You just saved me over $200!
@alexpost58714 жыл бұрын
Thanks for the video. Fan from Canada. Did this after watching your video and a few others.
@khanchefawad4 жыл бұрын
Superlikes. Very well expained with step by step procedure. Online purchases, price, and everything. I like your vdos very Especially bcoz i also have a sx4 2008 model
@beastfocker10 жыл бұрын
Thank you so much for showing us your great work. Mant Many Thanx Brother!!! =)
@reg0r7248 жыл бұрын
thank you for the reply I'm going to check all of these out.
@triplemotor9 жыл бұрын
Thanks for your help, it was much appreciated
@santoswo10 жыл бұрын
This video is helping me very much Congratulation
@triplemotor10 жыл бұрын
That was excellent..Thank You
@henrybonruiz7 жыл бұрын
Thank you very much for your passion and time.
@volvosweden
7 жыл бұрын
+Henry Bon Ruiz Thank you.
@carlosgrupilo86574 жыл бұрын
Thank You so much!!
@serser6101 Жыл бұрын
Интересное видео,пригодилось.Спасибо!
@igorr69469 жыл бұрын
Отлично!Спасибо!
@bobbrown3901 Жыл бұрын
Do you have a video for rear drive shaft seal replace on rear end of Suzuki SX-4 all wheel drive 2011
@dharmeshmori20847 жыл бұрын
nice vedio.thanks
@1990lumina9 жыл бұрын
It is more common that the inner tie rods are loose just an FYI for people looking :)...
@steveroe64059 жыл бұрын
I want to buy the Hatchback is it a good car and what should i really check on the car if its used Please any help would be great
@erics91037 жыл бұрын
will this be the same or similar for a 2002 suzuki grand vitara? Also I watched your video on changing the control arm and I am hoping it will be the same for the grand vitara.
@volvosweden
7 жыл бұрын
+Eric S Both will be very similar.
@erics9103
7 жыл бұрын
Thanks a lot! Good video!
@tanmaygaikwad49057 жыл бұрын
hi!! i have an 2010 sx4. it makes a lil bit of knocking sound and also i could not feel any comfort while on bumpy or rough roads. the stress directly comes on the steering. also cars makes a lot of noise while on bumpy roads. do i need to replace the tie rods and suspensions?
@volvosweden
7 жыл бұрын
+Tanmay Gaikwad I cant help you from distance. You need to take it to a shop.
@reg0r7248 жыл бұрын
hey there volvosweden! i have a 2007 sx4 2.0 awd 90k .. i have an issue while driving at 65mph 2500 rpms the car shakes shimmys and vibrates, but when i slightly turn the steering wheel to left it goes away.. have u had this happen ?? wheel bearing?
@volvosweden
8 жыл бұрын
I've had it happen at highway speed when I had to brake. Never found the cause. But found left ball jount loose, worn sway bar bushings and bad two u joints on the proppeler shaft.
@volvosweden
8 жыл бұрын
Make ure to check the u joints before it gets worse and then you need a new complete driveshaft.
@vladimir.rotaru
5 жыл бұрын
@@volvosweden Usually it is brake disks...
4 жыл бұрын
My car sx4 make Knocking noise(steering )over bumpy road on driverside and also the car vibrate on smooth road at 20km speed .Need ur help
@justiceneveling33734 жыл бұрын
i wish he did a rack and pinion video no one in all of the internet has info on a rack.
@edmedm1238 жыл бұрын
hey there volvosweden I have a 2007 sx4 1.6 102k I have an issue with the car the car make a knocking sound at the bottom front right wheel when im making a slow right turn especially when its uphill do you an idea what causing that tnx.
@volvosweden
8 жыл бұрын
sorry I dont have an idea
@edmedm123
8 жыл бұрын
+volvosweden ok thanks volvosweden
@timd55979 ай бұрын
Do you have video on inner rod change?
@volvosweden
9 ай бұрын
Nope
@alexandrkorotkoff855 жыл бұрын
А графиткой резьбу смазать?
@gitlerkaput90519457 жыл бұрын
парни,епать ковырять сижу вслушиваюсьэв буржуйский язык,а вы раз и по русски заговорили :-) ,делайте ролики на русском ек макарек
@o0crazyboneso0o37 жыл бұрын
hi I just bought a 2009 suzuki sx4 and I need to watch your videos and familiarize myself with it. Had an Chevy Aveo and I engineering was more simple than Suzuki. I have an oil leak and I am looking for the oil pressure sender.
@volvosweden
7 жыл бұрын
+anthony serra Intresting. Let us know what you find.
@o0crazyboneso0o3
7 жыл бұрын
volvosweden I am saving all Suzuki Sx4 videos. Great explanation and and video quality.
@Rammen10 жыл бұрын
-тоже 19? -нет. )))))))))))
@volvosweden
10 жыл бұрын
Есть такое
@Rammen
10 жыл бұрын
Ну наконец то Вы признались что по русски говорите)
@GarageMahalLife5 жыл бұрын
Here is my 20 minute fix for the SX4 tie rods kzread.info/dash/bejne/kX6suryImqffc7g.html
@nissimshohat12714 жыл бұрын
לא מקצועי והיכן הבטיחות...
@volvosweden
4 жыл бұрын
משה יש אחי.
@MaN-hp5iz4 жыл бұрын
Хотя бы на русском дублируйте! Только из за этого на вас не подписываюсь!
Пікірлер: 49
You're doing so much for SX4 owners all over the world. Please keep making videos like this!
-Now let`s make an alignment.... -I don`t think so. :D made my day Russion style
dont forget at the end of this video to tighten that nut to the tie rod end you should have your wrench on the nut and one on the little slots on the tie rod also.
Thank you so much! You just saved me over $200!
Thanks for the video. Fan from Canada. Did this after watching your video and a few others.
Superlikes. Very well expained with step by step procedure. Online purchases, price, and everything. I like your vdos very Especially bcoz i also have a sx4 2008 model
Thank you so much for showing us your great work. Mant Many Thanx Brother!!! =)
thank you for the reply I'm going to check all of these out.
Thanks for your help, it was much appreciated
This video is helping me very much Congratulation
That was excellent..Thank You
Thank you very much for your passion and time.
@volvosweden
7 жыл бұрын
+Henry Bon Ruiz Thank you.
Thank You so much!!
Интересное видео,пригодилось.Спасибо!
Отлично!Спасибо!
Do you have a video for rear drive shaft seal replace on rear end of Suzuki SX-4 all wheel drive 2011
nice vedio.thanks
It is more common that the inner tie rods are loose just an FYI for people looking :)...
I want to buy the Hatchback is it a good car and what should i really check on the car if its used Please any help would be great
will this be the same or similar for a 2002 suzuki grand vitara? Also I watched your video on changing the control arm and I am hoping it will be the same for the grand vitara.
@volvosweden
7 жыл бұрын
+Eric S Both will be very similar.
@erics9103
7 жыл бұрын
Thanks a lot! Good video!
hi!! i have an 2010 sx4. it makes a lil bit of knocking sound and also i could not feel any comfort while on bumpy or rough roads. the stress directly comes on the steering. also cars makes a lot of noise while on bumpy roads. do i need to replace the tie rods and suspensions?
@volvosweden
7 жыл бұрын
+Tanmay Gaikwad I cant help you from distance. You need to take it to a shop.
hey there volvosweden! i have a 2007 sx4 2.0 awd 90k .. i have an issue while driving at 65mph 2500 rpms the car shakes shimmys and vibrates, but when i slightly turn the steering wheel to left it goes away.. have u had this happen ?? wheel bearing?
@volvosweden
8 жыл бұрын
I've had it happen at highway speed when I had to brake. Never found the cause. But found left ball jount loose, worn sway bar bushings and bad two u joints on the proppeler shaft.
@volvosweden
8 жыл бұрын
Make ure to check the u joints before it gets worse and then you need a new complete driveshaft.
@vladimir.rotaru
5 жыл бұрын
@@volvosweden Usually it is brake disks...
My car sx4 make Knocking noise(steering )over bumpy road on driverside and also the car vibrate on smooth road at 20km speed .Need ur help
i wish he did a rack and pinion video no one in all of the internet has info on a rack.
hey there volvosweden I have a 2007 sx4 1.6 102k I have an issue with the car the car make a knocking sound at the bottom front right wheel when im making a slow right turn especially when its uphill do you an idea what causing that tnx.
@volvosweden
8 жыл бұрын
sorry I dont have an idea
@edmedm123
8 жыл бұрын
+volvosweden ok thanks volvosweden
Do you have video on inner rod change?
@volvosweden
9 ай бұрын
Nope
А графиткой резьбу смазать?
парни,епать ковырять сижу вслушиваюсьэв буржуйский язык,а вы раз и по русски заговорили :-) ,делайте ролики на русском ек макарек
hi I just bought a 2009 suzuki sx4 and I need to watch your videos and familiarize myself with it. Had an Chevy Aveo and I engineering was more simple than Suzuki. I have an oil leak and I am looking for the oil pressure sender.
@volvosweden
7 жыл бұрын
+anthony serra Intresting. Let us know what you find.
@o0crazyboneso0o3
7 жыл бұрын
volvosweden I am saving all Suzuki Sx4 videos. Great explanation and and video quality.
-тоже 19? -нет. )))))))))))
@volvosweden
10 жыл бұрын
Есть такое
@Rammen
10 жыл бұрын
Ну наконец то Вы признались что по русски говорите)
Here is my 20 minute fix for the SX4 tie rods kzread.info/dash/bejne/kX6suryImqffc7g.html
לא מקצועי והיכן הבטיחות...
@volvosweden
4 жыл бұрын
משה יש אחי.
Хотя бы на русском дублируйте! Только из за этого на вас не подписываюсь!