Suzuki Jimny 1.3 Supercharger system installation | Chargertech
Автокөліктер мен көлік құралдары
In this video we will explain how to install our Suzuki Jimny 1.3 Supercharger system
(www.chargertech.nl/alles-turb...)
Be sure to subscribe and follow us on our other socials for updates on this system and many other products we offer!
IG: / chargertech_nl
FB: / chargertech
DISCLAIMER: ALLWAYS HAVE THE CAR TUNED AFTER INSTALLING THIS SYSTEM.
Without a change in fueling you WILL damage your engine.
We offer a piggyback system that allows you to tune the engine management yourself if you have the required knowledge.
Be aware that this video is meant to show how easily the system is installed, it is not a full manual and should not be regarded as such.
If a more detailed manual is needed it might be wise to hire an experienced mechanic.
Before the start of this video the we have removed the exhaust manifold to create a better view of the work done. However this is not needed to install the system.
If you have any questions feel free to contact us, or leave us a comment and we will get back to you.
Пікірлер: 17
Suzuki Jimmy is best well kept secret in the off road industry. This kit is every Jimmy owners dream. This needs to get us all over the world . Nairobi Kenya.
Is it a 1.3 litre G13BB engine ?Also what supercharger is it and what mods have you done to the engine management and injectors ?
Can you still get these
What was the difference in power and torque?
Does it fit on the 1.5 engine?
Would this kit fit a baleno?
How much power did it make?
Is deze ook geschikt voor een Jimny 1.3 uit 2015? En doen jullie ook inbouwen?
If it suits for m13a, possible - can it suits for m15a/m16a?
@chargertech
Жыл бұрын
It could maybe but we haven't tried it so can't give you any guarantees at the moment. Perhaps we can add this information in the future
I have g16b on my jimny do you have a kit for that engine
@chargertech
2 жыл бұрын
Not yet, depending on the popularity of the 1.3 kit we might add another kit in the future!
@spiroskonst3736
2 жыл бұрын
Do you have a number of hp for the g13 at 0.7 bar
@chargertech
2 жыл бұрын
@@spiroskonst3736 no, we made the kit on a stock engine and didn't want to push it to far. If you would go 0.7 bar I would suggest strengthening the engine. I would estimate around 60-70÷ more power and 70-80÷ more torque
А куллер для охлаждения, а че с выхлопным коллектором то, не понятно
Can I have the link for supercharger.. ?
@chargertech
Жыл бұрын
Offcourse you can: www.chargertech.net/turbo-superchargers/superchargers/suzuki-jimny-1-3-superchargerset.html