Follow all our Adventures on our new channel - kzread.info/dron/JfA7nikBEM9gR_PyCbUmGg.html Follow all of the Suzuki Fishing Team on Instagram instagram.com/suzuki_uk_fishing?igshid=MzRlODBiNWFlZA==
@seanlathbury5410 Жыл бұрын
Thank you Raymarine for supporting these folks. I already use exclusively your products… this just confirms your quality as a company.
@user-lg5gm1df2s Жыл бұрын
Thinking you should consider if you haven’t already, some ventilation in the battery compartment. They will put out fumes as they charge and your power supply may suffer from the fumes. Love your content and look forward to all your videos been watching your videos for a very long time.
@DAVIDBrown-zp8sz
Жыл бұрын
Highly agree. Vented to outside to also get rid of heat even if those might be sealed batteries , didn't notice .
@mrmitch4599
Жыл бұрын
Brilliant job guys!👏👏 But definitely ventilation in the battery area, a couple of smaller computer fans? Well done!
@nickgoodall578 Жыл бұрын
Looks like you guys are getting some material recognition for the TITANIC amount of work you put into the channels. Your videos make me believe that you deserve it. Enjoy the fruits of your labour!
@1401196616091996
Жыл бұрын
Great job guys, g’day from Brisbane Oz again….
@duaneayers6117 Жыл бұрын
Can't hardly wait until we see the boat in the water. Looks Great 👍
@aritaridrive6539 Жыл бұрын
Batteries - we ran a similar setup with one "engine" battery and one "electrics" battery but we also had a cross-link switch between the two so that in the event that one died you could use the other to, usually, try and start the engine. Always call the coastguard to let them know what's happening before you flatten both batteries though :) A mains powered smart batter charger is great to make sure that you are always ready to go and makes the batteries last longer.
@andrewjones-productions Жыл бұрын
Wow - just fantastic! I think that the 'Suzuki Fishing Team' are absolutely brilliant for adding you because something like boating or fishing (from a boat) can be daunting to take up just because there is a perception of being difficult to join or do (especially here in Japan). The Suzuki Fishing Team have in one single action made it look welcoming and accessible. That alone give one the confidence to walk into a marina and ask questions. Naturally, there isn't any reason why anyone shouldn't do that, but removing ridiculous perceptions that people like myself have is really welcome. Simon and Gemma are also contributing massively to encouraging many to consider taking up boating and/or fishing.
@ShipHappensUK
Жыл бұрын
What a wonderful comment, and if we can do it, anyone can! I'm so happy we can help show people that anything can be done, since we started our journey into fishing, the one thing that has blown me away is how supportive and helpful the community is! X
@fonhollohan2908 Жыл бұрын
Simon you should encapsulate those transom holes with epoxy by drilling them larger and filling the hole with epoxy than when it cures drill the right size hole for the bolts that is required. That way the transom won't rof from the bolt holes.
@jimmyjohnstone5878
Жыл бұрын
That's what I was going to say. Drill a bigger hole. Full with epoxy resin. Then drill through this to the correct bolt hole size. That way, no wood is directly bolted through but the load is taken by the strength of an epoxy area.
@scottsorby7966 Жыл бұрын
I was gobsmacked at how quiet that engine was on tickover, ok its gonna scream like a spoiled toddler when Simon is thrashing it over the sea but thats all part of the fun. Well done team Robbins 👍
@marvindebot3264
Жыл бұрын
it still won't scream, those Suzies are crazy quiet even by modern 4-stroke standards.
@rancillinmontgomery2480 Жыл бұрын
I’m impressed with the Suzuki guys installing the engine for you and setting it up. Don’t really get that kind of service much anymore. Great job guys.
@marvindebot3264 Жыл бұрын
That is an insanely good-looking little boat, you have done an incredible job of bringing an old girl back to life and you deserve all that sponsorship, you worked damn hard for it.
@gusbracewell3856 Жыл бұрын
Congratulations on your sponsorship from Suzuki
@keithweybury5212 Жыл бұрын
Hi Guys the boat looks fantastic and great work on Suzuki Fishing Team Sponsorship.
@ryano.5149 Жыл бұрын
Oh heck yeah! Suzuki makes a great product!
@larslaisen9814 Жыл бұрын
Great video, nice to see that "finnish" (Finlands flag is blue and white) boat being finish. But I saw a PC-fan in danger, 12V battery power will shorten the lifetime for any 12V PC-fan. By putting a resistor in series with the fan will protect the fan. Formula for the resistor in (13,8V-12V)/current, current is the value stamped on the fan an the result is in ohm. And if you not have a name on the boat, my suggestion is "Fish happens".
@trevorpalmer1891 Жыл бұрын
You deserve the best for all your hard work, you'll catch some huge fish! Tight Lines!
@FastHatTrick Жыл бұрын
It is interesting to see you two in your comfort zone. This episode is basically you walking us through what you guys do for a living. Granted it’s on a boat, but this is all standard jobs on building customizing RV’s. Most probably don’t know that about you all unless they dig a little bit.
@neilkift2144
Жыл бұрын
Fished poeple, really!
@DiscusRussell Жыл бұрын
Hi for the glow in the dark attractor's use a camera flash in milliseconds they will be great. Tried and tested 👍 Then you can use the grow light to grow some Herbs ,well I was going to say pot 😂✌
@UberAdventure Жыл бұрын
It's turning out to be quite a good looking boat
@jonathanvince8173 Жыл бұрын
So glad you got everything to be safe and the fantastic sponsors Including Japanese Suzuki wow it looks so good.
@MrDportjoe Жыл бұрын
One silly suggestion, when you go for cushions et-al BRIGHT COLORS just in case you have any sort of emergency you will be easier to spot. Your hull color scheme is beautiful but blends into many sea conditions, having things beside the life jackets that are hi vis (even if not real high vis but bright colors.
@lauralake7430
Жыл бұрын
Red would look great with the color scheme, same as the floor pin-striping!
@TheGnomestead Жыл бұрын
Simon has been watching the same channels as I have. Just saw that spanner trick and can't wait to try it.
@PlanePreacher Жыл бұрын
Wow Simon, You do a better job cutting a round hole with a saber saw than I do with a hole saw!
@richelias2973 Жыл бұрын
You guys did a fantastic job on this boat. Happy boating!
@jeanhawken4482 Жыл бұрын
The outboard is something else. the boat is looking so good.
@mikelong8898 Жыл бұрын
Congratulations for being part of the Suzuki Fishing Team. The U.V light box is a great idea and nice touch. 👍
@jaythedead Жыл бұрын
The boat is looking great. I have enjoyed the build series. I look forward to the next video and seeing it in the water.
@martynbuzzing3327 Жыл бұрын
Well done, guys. Your hard work has paid off. The boat looks great. Happy boating.
@nedwphillips2126 Жыл бұрын
Hands down the best outboard, loved mine, Btw get a can of Inox and spray under the cowling all the metal will keep and it does not 'eat plastics or rubber.. best used after wash down while the motor is still warm... mine looked brand new after nearly 10 yrs of sea use...
@marvindebot3264
Жыл бұрын
Lanolin works even better. It looks a bit messy but nothing corrodes thru that stuff.
@TruBlue111 Жыл бұрын
Credit where its due, as a diehard dangler from The Solent area, the uv light idea is a stroke of genius! Ditch the muppets though and get some proper plastic! 👌
@richb313 Жыл бұрын
Great job with the boat can hardly wait to see her on the water.
@lauralake7430 Жыл бұрын
So wonderful! Cannot believe its the same boat!
@stephenhanson069 Жыл бұрын
quite the epic motor installation music !!!
@jonathanworthing6278 Жыл бұрын
Good to go the boat looks great. The colour scheme brilliant.
@jonathanvince8173 Жыл бұрын
Just a thought for the batteries to help absorb impact underneath a rubber car mat under the batteries as will absorb impacts that is what we did to our boats. Dont forget you drain plugs before in the water.
@philpines2681 Жыл бұрын
Awesome lookin outboard !
@kevinmartin3859 Жыл бұрын
Well done for your sponsorships just need the fish to bite love the boat you have done a cracking job that is one beautiful engine good work on the electrics especially the conduit idea just need a portable electric rings for cooking now to go with the power station 😊😊😊
@TR4zest Жыл бұрын
That conduit trick is genius! What fantastic support. It might be easier to say 'anglers' rather than 'fisher people'. I smiled my way through the whole episode. Chuffed for you.
@Tennessee101AB
Жыл бұрын
What about a fish box’s/bait box or you just going to use the glow in the dark plastic squid. You will need out riggers for the round fish like blue tuna. What about down riggers for cod. You have some large species of fish if you plan on winning in the contest , but pretty boats don’t catch fish.
@jeffreyoldham55 Жыл бұрын
Congratulations on all of your progress! I thought that your idea of the UV lighting to charge your fishing lures was brilliant! BTW...does your boat have a name, or is that revealed during a proper christening?
@larrydwyer4168 Жыл бұрын
Hay! Your enthusiasm for the two projects is tenacious (stalwart, stout, strong, sturdy, and tough. While all these words mean "showing power to resist or to endure," tenacious suggests strength in seizing, retaining, clinging to, or holding together.)
@pfalzgraf7527 Жыл бұрын
Very nice episode! And it is good to have at least one maiden voyage of yours in the immediate future! (waiting for the other one ... but I know that takes time) So, looking forward to seeing you NOT sink!
@stevejohnstonbaugh9171 Жыл бұрын
What a great video. I am SO happy for you. You certainly have worked hard for the support. I know what ever happens out on the water, you will produce some great content for your 77,000 subscribers and have a good time ! Best of luck, always 😊
@loki7441 Жыл бұрын
Thats a sweet engine and looks the biz on the back of the boat. I remember my teens on Lough Derg on holiday hanging onto a 3 HP Seagull Engine. Bomb proof little engines, but the vibration and sound like road drill on the end of your arm; you couldn't write your name after twenty minutes. Great holidays. Never caught anything other than one measly perch in all the holidays. I'd do it all over again. Had a thought in relation to your fan under the console. Fit a rheostat control, so you can reduce the noise for one and slow down the flow of air into the cabin to what's comfortable. It's cold on the water at night.
@randyjude8346 Жыл бұрын
Absolutely FANTASTIC! ... Not just you two, but the partnership with a wonderful outboard Suzuki. All the luck guys. Thank you for sharing!
@truckerjay Жыл бұрын
Happy for you project almost done
@ericwright2702 Жыл бұрын
I was watching wondering what size motor you would go with and I was thinking for the size of the Boat you would only get a 30 hp on the transom before it would be oversized But I am thinking old size motors and that 60 is absolutely perfect for the Boat the Motors have come down in size dramatically That Boat you Built is Absolutely amazing You Two are Going to KILL IT FISHING stay Safe
@gregbolitho9775 Жыл бұрын
Nice work, like the use of 'wasted space'. Now this is where this [15:50 in] portable power station thing goes between the starting and house battery? Excellent idea! My thoughtifs your not good a fishin, and you want to win the fishin comp, take a sticka jelly, light it, chuck it in and DUCK! Nice job on the stickerin Gem. Lubly Jubly motor 2 but. I've seen your boats big sista photo of Facebook. Gotta tellya, a pro boat against your rebuild, it close. Nice work! Thanks m8s!
@davidflamee Жыл бұрын
Brilliant, well done you two and, your sponsors.
@jbprospector3638 Жыл бұрын
Congratulations guys. 🎉. Boat looks awesome Go out and catch some fish and have fun. Be safe. 😎👍
@mjd03085354 Жыл бұрын
Well done, you’ve both worked hard as always on another project, something to have and get some relaxing time away from your main project, after all, everyone needs a break. By getting sponsors on this project just goes to show they have faith that they will get some good publicity from yourselves. Cannot wait to see you on your first seaboat trial and your fishing practice for the competition.
@randallkuehnle8228 Жыл бұрын
That's a fantastic looking boat. Well done you two.
@Taoelvenmage Жыл бұрын
Love it! Such a great looking boat and motor combo!
@quarlow1215 Жыл бұрын
I think i would have mounted those battery switches as high up as possible. If you swamp you want them to be the last thing that goes under water.
@ebutuoyotwen Жыл бұрын
That skiff tricked out nice :)
@Scampcam Жыл бұрын
that boat is gonna fly!
@TheCaptainbeefylog Жыл бұрын
I like that you've fitted an auxillary bracket. Most boats don't have them now. I've been told its because modern engines "don't break down" and yet I've had to tow a few back to the ramp with my old tinny. I've been a fan of Suzuki outboards for a few decades now. Good gear. Don't let having a smaller boat make you think you won't do well in her. I've won a few competitions in various events fishing out of boats under 15' while others were using 30 footers and couldn't turn a trick.
@malcolmmcgougan8372 Жыл бұрын
I Love you guys. You work so hard, you get on so well, and there is real talent in those bones. I want to see you go fishing...
@ShipHappensUK
Жыл бұрын
Pop over to our new channel kzread.info/dash/bejne/k5mBp9NwdZCaabw.html
@dandersonjr Жыл бұрын
If only the big boat project could be completed in the time it took to complete this project. Looking forward to seeing you two actually fish.
@simoncooper2324 Жыл бұрын
fantastic vlog carnt wait to see the next one and see how the boat handles
@bradlangvardt4138 Жыл бұрын
Well done
@monkeybarmonkeyman Жыл бұрын
Suzuki - awesome & righteous company! Always loved their products way back into the late 60'''s.
@TheFatController82 Жыл бұрын
Look forward to welcoming you to Gunwharf Quays Marina.
@ShipHappensUK
Жыл бұрын
Looking forward to it so much!!!
@bartjohnson8139 Жыл бұрын
What a great transformation! Your little fishing boat looks great! And I imaging that it would be well suited as a dingy in the future. And congratulations on being picked up by Suzuki!!
@beingatliberty Жыл бұрын
Now you’ve got to fish up a storm, normally you need to win some stuff to get this level of sponsorship, but your a good team to have on anyones side
@philmcinerney6958 Жыл бұрын
If the boat is tail heavy , put a 50 litre plastic tank ( the tanks are very strong and safe assuming its well mounted ) up the front mounted under the deck ,inside the cabin . Then you have a deck fill and the breather / overflow goes out through the side of the boat . I have done this to one of my boats , it made a big difference . It also made a difference to steering at low speed , no more side to side .
@kevinhitchner6347 Жыл бұрын
Absolutely love your shows! The two of you are completely amazing together and it shows in the great content you consistently create. I'm always looking forward to your next installment. Thanks for all the laughs!
@afmoa Жыл бұрын
The PERFECT motor for that boat! Suzuki 4 stroke 60 HP.
@Arzman6011 Жыл бұрын
Well done dear friends well done. You should be proud of what you both have accomplished in rehabilitating that little boat (and the Sarinda too). God bless and keep you both well.
@garethlewis2680 Жыл бұрын
That boat looks amazing. As much as I love seeing the ship being worked on this has been a nice change. How funny it would be if you won the competition 😂😂😂. Never miss a video that you put out. Keep up the amazing work you do.
@nicksearle3677 Жыл бұрын
How nice is that boat! That’s the way to sort it. I see many of these looking very sad on people’s driveways. Also great zapping of the sticker, send some my way and I see how many ships I can get the on……….
@lvlndco Жыл бұрын
Will you be covering all the safety equipment and gear? Also, do you have a little backup motor in case the big one decides it wants a rest?
@ianmcfadden4709 Жыл бұрын
you should think about a battery parallel switch so if one is low the other can assist
@Zarathrusta1976Ай бұрын
Get a nice noctua quiet fan and a finer intake filter that seals better. As more of a computer guy they do make a difference. You can even get magnetic filters that are quick change and clean. I use them for building cnc control units.
@whitneylake2107 Жыл бұрын
Definitely THE coolest fishing boat !!
@trolley69 Жыл бұрын
Great work! Just need to add a small solar panel to run the fan when your not on the boat to keep it fresh in there!
@looyosummers5796 Жыл бұрын
What a sharp looking boat, I absolutely love it.👏🍻
@richardgould240 Жыл бұрын
The boat looks awesome well done and good luck with your fishing 🎣 adventures
@waynecummins9713 Жыл бұрын
I'm so happy for you guys, Hampshire 🇬🇧
@jeremyfdavies Жыл бұрын
Excellent video! What an achievement, not only the boat building but on the PR and sponsor side, that is enviable! Well done! Looking forward to seeing you catch that tuna...
@Antony_Jenner Жыл бұрын
I hope Simon that you soldered those push on wiring connections to stop corrosion ingress into your wires. Some people will say it's all right but specially in salt water corroded connections can cause all sorts of problems.
@agw5425 Жыл бұрын
You could put a resistor inline with the fan to reduce the rpm and noise by a lot without losing much air flow, just get one of the right ohm and that can handle the wattage. Formulas to calculate the ohm´s is on line. You could get a variable resistor to control the speed of the fan but the higher wattage ones cost a lot more. I recommend conformal coating or similar to keep the batteries and cables under the sink from shorting as water will be in the vicinity.
@mikeskelly2356 Жыл бұрын
I think it might help to reduce mold and musty odors in the cabin if you fitted a metal louver to the lower part of the cabin door. With all the work to be done on Sarinda, your 'Fishing and Tip Hauler' will sit closed up for long periods. To prevent the nasty growths from getting started, mix a cup of vinegar and a 1/2 cup of water with an 1/8th teaspoon tea tree oil. Spray all the hidden spaces where mold likes to grow...And, just my opinion, I think a 'faux' porthole in the top of the cabin door would look spiffy! Lastly, will the Sprogs be coming fishing, or will it be to intense for them?...
@robinday2392 Жыл бұрын
Totally amazing. You guys have done a fantastic job on the boat it looks incredible. Congratulations on your sponsors and a massive welldone too you both on this awesome project.
@beingatliberty Жыл бұрын
The fan may run on 5v quieter? Which would be nice, that noise would drive me bonkers. Noctua also sell resistor fan adapter cables to slow them down, make them run quieter
@nick.caffrey Жыл бұрын
Wow! That conduit hack is amazing! Thanks!
@ShipHappensUK
Жыл бұрын
Makes it easier for sure!
@davidelliott5843
Жыл бұрын
It’s a fantastic idea. You will be able to add additional single wires using an 8mm ring spanner.
@nicktomlin9137 Жыл бұрын
She looks like a real beauty. Now you just have to land something big, but for godsake. Dont say we are going to need a bigger boat😳😬🤣🤣
@jamesa7506 Жыл бұрын
One baaad boat right there! I really dig the horn. You should be able to catch Jaws now.😉👍
@moreybandel5560 Жыл бұрын
Congratulations you guys, Suzuki fishing team! The fishing boat looks great! Raring to go!
@brendanaengenheister5351 Жыл бұрын
Very much a James Bond type boat now.
@marksmith-ew7ir Жыл бұрын
Like the led fuse board great choice for when there no power to blown fuse.
@TheBeaker59 Жыл бұрын
I have launched several new boats my latest yesterday one thing I loath at boat launches are the people who say "will it sink" grrrrrrrrrr spoiler alert they never do usually they have issues or faults but rarely serious. The one I launched yesterday was a sculling dory and its fault was the rowlock position I will move that 50mm aft. Great boat god bless her and all who sail in her :) and haven't modern outboards come a long way.
@williamkhatchell620 Жыл бұрын
Nice motor!
@johnverkaik Жыл бұрын
Thank you both for sharing your life. I’ve followed you from the start. Your enthousiasme is contagious. (Hope my spelling is ok, I’m Dutch) But my grandmother lived in Hoylake, and that is near where Sarinda is, isn’t It? I remenber as a child the tide going out very far an coming back at walking space….. Good fun and succes with your Suzuki fishing team, greeting john
@ShipHappensUK
Жыл бұрын
Hoylake is not far at all! Did you watch the video we did on cycling the wirral coast? You might recognise some places!
@denis9450 Жыл бұрын
Boat looks great a good pointer to how well you do your camper conversions anybody looking to get an RV conversion should give these guys a shout well done both love from Liverpool
@davedave6404 Жыл бұрын
I guess it's a good time to learn to fish and swim now? Outstanding presentation. Just love you guys and your joy of life and abilities.
@jackjill2574 Жыл бұрын
realy nice boat, you guys have worked hard
@robo4599 Жыл бұрын
You, perhaps should have put a light grey tint on the windscreen and side screens, it would protect the polycarbonate and....that would have raised the WOW ! factor considerably.....It is not too late ! ! ! ! !
@gkkes Жыл бұрын
All you need now is to watch "Man's favourite Sport", a movie starring Rock Hudson and Paula Prentiss (For the fishing tips)🙂
@TheMrbazooka Жыл бұрын
Top Job 🤘
@hubertfruzia1803 Жыл бұрын
Just remember with that Suzuki. You must break it in properly that is one of the best engines in the world.
Пікірлер: 245
Follow all our Adventures on our new channel - kzread.info/dron/JfA7nikBEM9gR_PyCbUmGg.html Follow all of the Suzuki Fishing Team on Instagram instagram.com/suzuki_uk_fishing?igshid=MzRlODBiNWFlZA==
Thank you Raymarine for supporting these folks. I already use exclusively your products… this just confirms your quality as a company.
Thinking you should consider if you haven’t already, some ventilation in the battery compartment. They will put out fumes as they charge and your power supply may suffer from the fumes. Love your content and look forward to all your videos been watching your videos for a very long time.
@DAVIDBrown-zp8sz
Жыл бұрын
Highly agree. Vented to outside to also get rid of heat even if those might be sealed batteries , didn't notice .
@mrmitch4599
Жыл бұрын
Brilliant job guys!👏👏 But definitely ventilation in the battery area, a couple of smaller computer fans? Well done!
Looks like you guys are getting some material recognition for the TITANIC amount of work you put into the channels. Your videos make me believe that you deserve it. Enjoy the fruits of your labour!
@1401196616091996
Жыл бұрын
Great job guys, g’day from Brisbane Oz again….
Can't hardly wait until we see the boat in the water. Looks Great 👍
Batteries - we ran a similar setup with one "engine" battery and one "electrics" battery but we also had a cross-link switch between the two so that in the event that one died you could use the other to, usually, try and start the engine. Always call the coastguard to let them know what's happening before you flatten both batteries though :) A mains powered smart batter charger is great to make sure that you are always ready to go and makes the batteries last longer.
Wow - just fantastic! I think that the 'Suzuki Fishing Team' are absolutely brilliant for adding you because something like boating or fishing (from a boat) can be daunting to take up just because there is a perception of being difficult to join or do (especially here in Japan). The Suzuki Fishing Team have in one single action made it look welcoming and accessible. That alone give one the confidence to walk into a marina and ask questions. Naturally, there isn't any reason why anyone shouldn't do that, but removing ridiculous perceptions that people like myself have is really welcome. Simon and Gemma are also contributing massively to encouraging many to consider taking up boating and/or fishing.
@ShipHappensUK
Жыл бұрын
What a wonderful comment, and if we can do it, anyone can! I'm so happy we can help show people that anything can be done, since we started our journey into fishing, the one thing that has blown me away is how supportive and helpful the community is! X
Simon you should encapsulate those transom holes with epoxy by drilling them larger and filling the hole with epoxy than when it cures drill the right size hole for the bolts that is required. That way the transom won't rof from the bolt holes.
@jimmyjohnstone5878
Жыл бұрын
That's what I was going to say. Drill a bigger hole. Full with epoxy resin. Then drill through this to the correct bolt hole size. That way, no wood is directly bolted through but the load is taken by the strength of an epoxy area.
I was gobsmacked at how quiet that engine was on tickover, ok its gonna scream like a spoiled toddler when Simon is thrashing it over the sea but thats all part of the fun. Well done team Robbins 👍
@marvindebot3264
Жыл бұрын
it still won't scream, those Suzies are crazy quiet even by modern 4-stroke standards.
I’m impressed with the Suzuki guys installing the engine for you and setting it up. Don’t really get that kind of service much anymore. Great job guys.
That is an insanely good-looking little boat, you have done an incredible job of bringing an old girl back to life and you deserve all that sponsorship, you worked damn hard for it.
Congratulations on your sponsorship from Suzuki
Hi Guys the boat looks fantastic and great work on Suzuki Fishing Team Sponsorship.
Oh heck yeah! Suzuki makes a great product!
Great video, nice to see that "finnish" (Finlands flag is blue and white) boat being finish. But I saw a PC-fan in danger, 12V battery power will shorten the lifetime for any 12V PC-fan. By putting a resistor in series with the fan will protect the fan. Formula for the resistor in (13,8V-12V)/current, current is the value stamped on the fan an the result is in ohm. And if you not have a name on the boat, my suggestion is "Fish happens".
You deserve the best for all your hard work, you'll catch some huge fish! Tight Lines!
It is interesting to see you two in your comfort zone. This episode is basically you walking us through what you guys do for a living. Granted it’s on a boat, but this is all standard jobs on building customizing RV’s. Most probably don’t know that about you all unless they dig a little bit.
@neilkift2144
Жыл бұрын
Fished poeple, really!
Hi for the glow in the dark attractor's use a camera flash in milliseconds they will be great. Tried and tested 👍 Then you can use the grow light to grow some Herbs ,well I was going to say pot 😂✌
It's turning out to be quite a good looking boat
So glad you got everything to be safe and the fantastic sponsors Including Japanese Suzuki wow it looks so good.
One silly suggestion, when you go for cushions et-al BRIGHT COLORS just in case you have any sort of emergency you will be easier to spot. Your hull color scheme is beautiful but blends into many sea conditions, having things beside the life jackets that are hi vis (even if not real high vis but bright colors.
@lauralake7430
Жыл бұрын
Red would look great with the color scheme, same as the floor pin-striping!
Simon has been watching the same channels as I have. Just saw that spanner trick and can't wait to try it.
Wow Simon, You do a better job cutting a round hole with a saber saw than I do with a hole saw!
You guys did a fantastic job on this boat. Happy boating!
The outboard is something else. the boat is looking so good.
Congratulations for being part of the Suzuki Fishing Team. The U.V light box is a great idea and nice touch. 👍
The boat is looking great. I have enjoyed the build series. I look forward to the next video and seeing it in the water.
Well done, guys. Your hard work has paid off. The boat looks great. Happy boating.
Hands down the best outboard, loved mine, Btw get a can of Inox and spray under the cowling all the metal will keep and it does not 'eat plastics or rubber.. best used after wash down while the motor is still warm... mine looked brand new after nearly 10 yrs of sea use...
@marvindebot3264
Жыл бұрын
Lanolin works even better. It looks a bit messy but nothing corrodes thru that stuff.
Credit where its due, as a diehard dangler from The Solent area, the uv light idea is a stroke of genius! Ditch the muppets though and get some proper plastic! 👌
Great job with the boat can hardly wait to see her on the water.
So wonderful! Cannot believe its the same boat!
quite the epic motor installation music !!!
Good to go the boat looks great. The colour scheme brilliant.
Just a thought for the batteries to help absorb impact underneath a rubber car mat under the batteries as will absorb impacts that is what we did to our boats. Dont forget you drain plugs before in the water.
Awesome lookin outboard !
Well done for your sponsorships just need the fish to bite love the boat you have done a cracking job that is one beautiful engine good work on the electrics especially the conduit idea just need a portable electric rings for cooking now to go with the power station 😊😊😊
That conduit trick is genius! What fantastic support. It might be easier to say 'anglers' rather than 'fisher people'. I smiled my way through the whole episode. Chuffed for you.
@Tennessee101AB
Жыл бұрын
What about a fish box’s/bait box or you just going to use the glow in the dark plastic squid. You will need out riggers for the round fish like blue tuna. What about down riggers for cod. You have some large species of fish if you plan on winning in the contest , but pretty boats don’t catch fish.
Congratulations on all of your progress! I thought that your idea of the UV lighting to charge your fishing lures was brilliant! BTW...does your boat have a name, or is that revealed during a proper christening?
Hay! Your enthusiasm for the two projects is tenacious (stalwart, stout, strong, sturdy, and tough. While all these words mean "showing power to resist or to endure," tenacious suggests strength in seizing, retaining, clinging to, or holding together.)
Very nice episode! And it is good to have at least one maiden voyage of yours in the immediate future! (waiting for the other one ... but I know that takes time) So, looking forward to seeing you NOT sink!
What a great video. I am SO happy for you. You certainly have worked hard for the support. I know what ever happens out on the water, you will produce some great content for your 77,000 subscribers and have a good time ! Best of luck, always 😊
Thats a sweet engine and looks the biz on the back of the boat. I remember my teens on Lough Derg on holiday hanging onto a 3 HP Seagull Engine. Bomb proof little engines, but the vibration and sound like road drill on the end of your arm; you couldn't write your name after twenty minutes. Great holidays. Never caught anything other than one measly perch in all the holidays. I'd do it all over again. Had a thought in relation to your fan under the console. Fit a rheostat control, so you can reduce the noise for one and slow down the flow of air into the cabin to what's comfortable. It's cold on the water at night.
Absolutely FANTASTIC! ... Not just you two, but the partnership with a wonderful outboard Suzuki. All the luck guys. Thank you for sharing!
Happy for you project almost done
I was watching wondering what size motor you would go with and I was thinking for the size of the Boat you would only get a 30 hp on the transom before it would be oversized But I am thinking old size motors and that 60 is absolutely perfect for the Boat the Motors have come down in size dramatically That Boat you Built is Absolutely amazing You Two are Going to KILL IT FISHING stay Safe
Nice work, like the use of 'wasted space'. Now this is where this [15:50 in] portable power station thing goes between the starting and house battery? Excellent idea! My thoughtifs your not good a fishin, and you want to win the fishin comp, take a sticka jelly, light it, chuck it in and DUCK! Nice job on the stickerin Gem. Lubly Jubly motor 2 but. I've seen your boats big sista photo of Facebook. Gotta tellya, a pro boat against your rebuild, it close. Nice work! Thanks m8s!
Brilliant, well done you two and, your sponsors.
Congratulations guys. 🎉. Boat looks awesome Go out and catch some fish and have fun. Be safe. 😎👍
Well done, you’ve both worked hard as always on another project, something to have and get some relaxing time away from your main project, after all, everyone needs a break. By getting sponsors on this project just goes to show they have faith that they will get some good publicity from yourselves. Cannot wait to see you on your first seaboat trial and your fishing practice for the competition.
That's a fantastic looking boat. Well done you two.
Love it! Such a great looking boat and motor combo!
I think i would have mounted those battery switches as high up as possible. If you swamp you want them to be the last thing that goes under water.
That skiff tricked out nice :)
that boat is gonna fly!
I like that you've fitted an auxillary bracket. Most boats don't have them now. I've been told its because modern engines "don't break down" and yet I've had to tow a few back to the ramp with my old tinny. I've been a fan of Suzuki outboards for a few decades now. Good gear. Don't let having a smaller boat make you think you won't do well in her. I've won a few competitions in various events fishing out of boats under 15' while others were using 30 footers and couldn't turn a trick.
I Love you guys. You work so hard, you get on so well, and there is real talent in those bones. I want to see you go fishing...
@ShipHappensUK
Жыл бұрын
Pop over to our new channel kzread.info/dash/bejne/k5mBp9NwdZCaabw.html
If only the big boat project could be completed in the time it took to complete this project. Looking forward to seeing you two actually fish.
fantastic vlog carnt wait to see the next one and see how the boat handles
Well done
Suzuki - awesome & righteous company! Always loved their products way back into the late 60'''s.
Look forward to welcoming you to Gunwharf Quays Marina.
@ShipHappensUK
Жыл бұрын
Looking forward to it so much!!!
What a great transformation! Your little fishing boat looks great! And I imaging that it would be well suited as a dingy in the future. And congratulations on being picked up by Suzuki!!
Now you’ve got to fish up a storm, normally you need to win some stuff to get this level of sponsorship, but your a good team to have on anyones side
If the boat is tail heavy , put a 50 litre plastic tank ( the tanks are very strong and safe assuming its well mounted ) up the front mounted under the deck ,inside the cabin . Then you have a deck fill and the breather / overflow goes out through the side of the boat . I have done this to one of my boats , it made a big difference . It also made a difference to steering at low speed , no more side to side .
Absolutely love your shows! The two of you are completely amazing together and it shows in the great content you consistently create. I'm always looking forward to your next installment. Thanks for all the laughs!
The PERFECT motor for that boat! Suzuki 4 stroke 60 HP.
Well done dear friends well done. You should be proud of what you both have accomplished in rehabilitating that little boat (and the Sarinda too). God bless and keep you both well.
That boat looks amazing. As much as I love seeing the ship being worked on this has been a nice change. How funny it would be if you won the competition 😂😂😂. Never miss a video that you put out. Keep up the amazing work you do.
How nice is that boat! That’s the way to sort it. I see many of these looking very sad on people’s driveways. Also great zapping of the sticker, send some my way and I see how many ships I can get the on……….
Will you be covering all the safety equipment and gear? Also, do you have a little backup motor in case the big one decides it wants a rest?
you should think about a battery parallel switch so if one is low the other can assist
Get a nice noctua quiet fan and a finer intake filter that seals better. As more of a computer guy they do make a difference. You can even get magnetic filters that are quick change and clean. I use them for building cnc control units.
Definitely THE coolest fishing boat !!
Great work! Just need to add a small solar panel to run the fan when your not on the boat to keep it fresh in there!
What a sharp looking boat, I absolutely love it.👏🍻
The boat looks awesome well done and good luck with your fishing 🎣 adventures
I'm so happy for you guys, Hampshire 🇬🇧
Excellent video! What an achievement, not only the boat building but on the PR and sponsor side, that is enviable! Well done! Looking forward to seeing you catch that tuna...
I hope Simon that you soldered those push on wiring connections to stop corrosion ingress into your wires. Some people will say it's all right but specially in salt water corroded connections can cause all sorts of problems.
You could put a resistor inline with the fan to reduce the rpm and noise by a lot without losing much air flow, just get one of the right ohm and that can handle the wattage. Formulas to calculate the ohm´s is on line. You could get a variable resistor to control the speed of the fan but the higher wattage ones cost a lot more. I recommend conformal coating or similar to keep the batteries and cables under the sink from shorting as water will be in the vicinity.
I think it might help to reduce mold and musty odors in the cabin if you fitted a metal louver to the lower part of the cabin door. With all the work to be done on Sarinda, your 'Fishing and Tip Hauler' will sit closed up for long periods. To prevent the nasty growths from getting started, mix a cup of vinegar and a 1/2 cup of water with an 1/8th teaspoon tea tree oil. Spray all the hidden spaces where mold likes to grow...And, just my opinion, I think a 'faux' porthole in the top of the cabin door would look spiffy! Lastly, will the Sprogs be coming fishing, or will it be to intense for them?...
Totally amazing. You guys have done a fantastic job on the boat it looks incredible. Congratulations on your sponsors and a massive welldone too you both on this awesome project.
The fan may run on 5v quieter? Which would be nice, that noise would drive me bonkers. Noctua also sell resistor fan adapter cables to slow them down, make them run quieter
Wow! That conduit hack is amazing! Thanks!
@ShipHappensUK
Жыл бұрын
Makes it easier for sure!
@davidelliott5843
Жыл бұрын
It’s a fantastic idea. You will be able to add additional single wires using an 8mm ring spanner.
She looks like a real beauty. Now you just have to land something big, but for godsake. Dont say we are going to need a bigger boat😳😬🤣🤣
One baaad boat right there! I really dig the horn. You should be able to catch Jaws now.😉👍
Congratulations you guys, Suzuki fishing team! The fishing boat looks great! Raring to go!
Very much a James Bond type boat now.
Like the led fuse board great choice for when there no power to blown fuse.
I have launched several new boats my latest yesterday one thing I loath at boat launches are the people who say "will it sink" grrrrrrrrrr spoiler alert they never do usually they have issues or faults but rarely serious. The one I launched yesterday was a sculling dory and its fault was the rowlock position I will move that 50mm aft. Great boat god bless her and all who sail in her :) and haven't modern outboards come a long way.
Nice motor!
Thank you both for sharing your life. I’ve followed you from the start. Your enthousiasme is contagious. (Hope my spelling is ok, I’m Dutch) But my grandmother lived in Hoylake, and that is near where Sarinda is, isn’t It? I remenber as a child the tide going out very far an coming back at walking space….. Good fun and succes with your Suzuki fishing team, greeting john
@ShipHappensUK
Жыл бұрын
Hoylake is not far at all! Did you watch the video we did on cycling the wirral coast? You might recognise some places!
Boat looks great a good pointer to how well you do your camper conversions anybody looking to get an RV conversion should give these guys a shout well done both love from Liverpool
I guess it's a good time to learn to fish and swim now? Outstanding presentation. Just love you guys and your joy of life and abilities.
realy nice boat, you guys have worked hard
You, perhaps should have put a light grey tint on the windscreen and side screens, it would protect the polycarbonate and....that would have raised the WOW ! factor considerably.....It is not too late ! ! ! ! !
All you need now is to watch "Man's favourite Sport", a movie starring Rock Hudson and Paula Prentiss (For the fishing tips)🙂
Top Job 🤘
Just remember with that Suzuki. You must break it in properly that is one of the best engines in the world.