Surprising Method to Fix Siding Cracks Fast

Тәжірибелік нұсқаулар және стиль

🛠️🛠️Vinyl Siding Mending Patch: amzn.to/4b8LmyM
This is the easiest and fastest method to repair your vinyl siding cracks. Easy to paint match colors.
Above is an Amazon affiliate link. If you complete the sale I will receive a commission.
😊Thank you for supporting my channel

Пікірлер: 27

  • @EastRiverHomestead
    @EastRiverHomesteadАй бұрын

    Got rental property with vinyl siding and never knew this product existed. Thank you, Larry.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    Yes it saves a lot of time and headaches...thanks for watching as usual

  • @cyclepowered8799
    @cyclepowered87994 күн бұрын

    Professional siding contactor here. I would repair both with actual siding for $50-75 plus the cost of 1 panel of siding. Nobody would know it was repaired either.

  • @HomeRapidRepair

    @HomeRapidRepair

    4 күн бұрын

    One piece of siding is probably 10 bucks? Thanks for sharing 👍🏼🛠️🛠️

  • @cyclepowered8799

    @cyclepowered8799

    4 күн бұрын

    @@HomeRapidRepair More now. Like everything else.

  • @Mickiki2
    @Mickiki2Ай бұрын

    You would have put a piece of duct tape over your holes and it would have look the same.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    Probably from just an appearance point of view. However duct tape will dry out and fall off in the sun…vinyl will hold up.

  • @fmradio42
    @fmradio42Ай бұрын

    A good way to apply stickers is peel off only 1/2 an inch. Line up the sticker without touching the half inch side. Then apply the half inch side and peel off the rest of the backing.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    I’ll try it!!! 100% 💪🏼🛠️. Thanks

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    I have a friend that owns a vinyl wrap business, I Should watch them 👍🏼

  • @hashimsalim2665
    @hashimsalim2665Ай бұрын

    great

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    Thank you for watching 😊🛠️🛠️

  • @NongNongHead
    @NongNongHeadАй бұрын

    I just poked a hole in my second floor siding last week… i didn’t know the nails were pulled out a bit and the siding was buckling. I leaned out the 2nd story window and pushed it and a nail broke a hole through. I patched it temporarily with aluminum tape that looks bad but worked…Im going to pull and replace a few feet of the piece since i have to re nail it. Its white.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    Oh you lucked out with white siding for sure. Good luck 😊🛠️🛠️

  • @nickp3173
    @nickp3173Ай бұрын

    I feel like it sticks out worse to the eye than the crack did. I'd rather just replace the vinyl siding in my opinion. My new home has this same sort of damage in a small area from a baseball.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    I do a lot of home inspections and EVERYONE has cracked vinyl siding somewhere 😳

  • @nickp3173

    @nickp3173

    Ай бұрын

    @@HomeRapidRepair Yeah, I think for this product to work it has to be a perfect identical color match. If it's off even the slightest, it will stand out like a sore thumb.

  • @cyclepowered8799

    @cyclepowered8799

    3 күн бұрын

    @@HomeRapidRepair True. I see mostly weed whacker damage and the vinyl gets melted from hot grills too close to the siding.

  • @VoltisArt
    @VoltisArt10 сағат бұрын

    This video said color matching can be done. While the sign installer in me is squirming a little on the application, it's just a demo for a quick, easy, CHEAP fix that anybody can do. If you want the color to match, match the color instead of being a troll about it on KZread. If you want it to look a little better still, add a heat gun or hair dryer and a soft rubber brayer, to roll the vinyl into the texture better. Don't get too close with the heat, vinyl film (and siding) can melt or burn.

  • @HomeRapidRepair

    @HomeRapidRepair

    9 сағат бұрын

    Thank you so much. I have a friend who installs vinyl wraps and I was going to hit them up for better vinyl application tips 😊👍🏼🛠️

  • @unionse7en
    @unionse7enАй бұрын

    doesn't look good, insert some backing strips with adhesive through the hole and pull flush against the backside. You can glue a nailhead on to the strips so you can pull it outward until glue grabs. Once you have some backing strip installed fill with bondo etc. You can even engrave texture into the bondo. then paint. if paint does not match use acrylic paints to tint , walmart has small tubes of acrylic in craft section.

  • @HomeRapidRepair

    @HomeRapidRepair

    Ай бұрын

    Thanks for watching and sharing your experience.

  • @cyclepowered8799

    @cyclepowered8799

    4 күн бұрын

    You could fill with spray foam and shave it flush when dry.

  • @HomeRapidRepair

    @HomeRapidRepair

    4 күн бұрын

    @@cyclepowered8799 I’ve seen that before, pretty rough but yes it’s an option

  • @cyclepowered8799

    @cyclepowered8799

    4 күн бұрын

    @@HomeRapidRepair Just for backing. Vinyl patch over top.

  • @user-nv7df6oj2z
    @user-nv7df6oj2z7 күн бұрын

    That looks terrible. It looks like a piece of duct tape.

  • @HomeRapidRepair

    @HomeRapidRepair

    7 күн бұрын

    You may be right. 😳

Келесі