this truly is a game changer

@Van_City

28 күн бұрын

It’s a good programming card 👍💯

Cool program card and great review

@Van_City

2 жыл бұрын

Thanks brother appreciate you stopping by. 👍💯💥

Very nice piece off kit 👌 great information and how to test video 👍 hope you have a wonderful Christmas 🎄 🇨🇦🇬🇧🇨🇦🇬🇧🎅

@Van_City

2 жыл бұрын

Thanks Tony. Merry Christmas 🎄🎅

Interesting little device. 💯👍 It’s nice they included a little better manual.

@Van_City

2 жыл бұрын

Did the original version even have a manual? I don’t think mine came with one.

@beastrcdragracingteam4256

2 жыл бұрын

It came with one but I was sure if I had to insert the cable back into the motor the motor

i love this product i have too, th'x the tutorial

@Van_City

Жыл бұрын

It’s a great product. Thanks for stopping by 👍💯💥

@tomazuwijaya7066

Жыл бұрын

@@Van_City yeah

Nice review, I may have to get one now lol. No reverse allowed in the US RC racing clubs. Brakes are allowed. I have a converted Associated RC10L drifter and several 1/28 cars that I run on a track in my basement. Check out the FPV drifting too.

@Van_City

2 жыл бұрын

Awesome, thanks for stopping by 👍💯💥

Like video but have a question new to the rc car , I have a futaba 3pv haven’t had a chance to set everything up on it for my arrma Typhon mega & my bandit xl-5. So my question will that mess up the settings in the transmitter

@Van_City

2 жыл бұрын

This specific programming card will only work with certain ESC’s, specifically made for surpass hobby branded ones there are others that are a rebrand that it will also work with. neither of your RC’s should require the use of this u less you have an aftermarket esc.

Hey everyone so I love the surpass 120s/esc. Bit I just got the 150a and with the two wires. I'd like to use just 1 6s battery on it instead of always using two batterys. Can anyone tell me about this

@Van_City

21 күн бұрын

Hi I have the same esc and just desoldered the connectors and re-soldered a single connector to the wires

Could you please explain how those cards work? How come it's possible to use few cards, that have settings in different order on one esc? I noticed in this case order is the same, but V2 has more adjustment in first five settings? There are videos, where people use the black card with 17 settings on a surpass 60A brushless. It's greatly confusing 😅

@Van_City

2 жыл бұрын

It’s hard to explain. Not all cards work for all ESC’s. The black one I have is an upgraded version of a popular surpass hobby grey programming card. The ones I use work with surpass hobby ESC’s but they also work with some of the other name brands that are the same but just rebranded under a different company. The hobby wing ones use a different programming card Even for me it’s confusing I hope I was able to shed a bit of light on this for you

That’s funny it looks very similar to the Hobbywing 1080 programmers 🤙

@Van_City

2 жыл бұрын

It is very similar to the Hobbywing 1080 Programmer 👍💯

The trigger delay for air control was unacceptable on my 150A Hobbystar v2 on factory settings. Were you able Resolve this with punch/boost/turbo adjustments?

@Van_City

Жыл бұрын

Yes that should be able to be resolved with programming the esc

@GarcBomber

Жыл бұрын

@@Van_City hoping it’s at least manageable to prevent buggy nose dives into the exposed tower, 😊

Have a question how can I use my lipo battery to there full capability before recharging it again. What voltage should I set it on the program card

@Van_City

2 жыл бұрын

To get the most life out of your Lipos and prevent them from being damaged you don’t want to drain them down too much. It’s recommended you set the parameters to the highest voltage setting.

@beastrcdragracingteam4256

2 жыл бұрын

is that on the program card

Hi. I need some help here. This program card is compatible to Surpass Hobby KK Series ESC ? Because my esc does not have a wire to check motor overheat protection

@Van_City

Жыл бұрын

Hi yes this programming card is compatible with the kk series ESC’s

@nashrulsyazwan9590

Жыл бұрын

@@Van_City Thank you so much for your help ! Have a nice day ! God bless you

I'm not getting goof brakes on mined I hve the 150esc but I set it up and tried it in the house but not getting any good brakes going to get the program card and see if I can turn up the brakes

@Van_City

4 ай бұрын

Should be able to adjust brake sensitivity with a programming card. 👍💯

@Rcjamaica876

4 ай бұрын

@@Van_City thank you bro..great videos

Does it the same or different results if compare with v.1 especially start mode, strong on v. 1 and level 6 on v. 2

@Van_City

2 жыл бұрын

There does seem to be a difference with the v2. being able to fine tune your selections better than v1.

Think overheat protection of the motor works only if there is a temperature sensor in the motor? :)

@Van_City

Жыл бұрын

Yeah that would make sense

Hiya great video only I'm confused as to which programming card is suitable for the the surpass hobby rc plane ESC? Thanks heaps 😉😎

@Van_City

5 ай бұрын

I’m honestly not certain you can program the esc from an rc plane. If you can this one should work

Hey once you get everything programmed do you insert the male cable back into the motor

@Van_City

2 жыл бұрын

Once everything is programmed you can hook everything backup and you’re good to go.

@beastrcdragracingteam4256

2 жыл бұрын

@@Van_City so I do have to hook the cable back into the motor

@Van_City

2 жыл бұрын

@@beastrcdragracingteam4256 I’m not 100% sure what cable you are referring to. Is it possible for you post a picture on the Van City RC Facebook Page? So I can see what you’re referring to

it looks very very similar to the Hobbywing cards. did you try compatability?

@Van_City

2 жыл бұрын

It is very similar, I don’t have the hobbywing card but I’m thinking I might grab one to see.

can anyone help me when I plug mine in it says e a a on the bit where the numbers should show up

@Van_City

Ай бұрын

Sounds like your esc may not be compatible. I’ll see if I can find more info on the eaa code

The reason why I’m asking is that i am going to be racing on carpet soon, and would like to know how long I can rac before I have to change batteries

@Van_City

2 жыл бұрын

What size battery you running?

@beastrcdragracingteam4256

2 жыл бұрын

3s lipo

@beastrcdragracingteam4256

2 жыл бұрын

I was told that when you race driver have to use 2s lipo battery

@beastrcdragracingteam4256

2 жыл бұрын

@@Van_City 3s lipo

The paper that shows the programming settings and their order overrides what is shown on the programming card. That is how it works with Hobbywing program cards, so I would assume the same for this card. I have this card but have only used it on a Rocket ESC (the new Surpass ESCs) which is what the list on the card is for. That list isn't the same as the other Surpass ESCs, so you should not base your programming off of that. A programming card can only give you access to the settings on the ESC, not give you new ones. That ESC that you programmed very likely doesn't have a setting for Motor Temp or ESC Temp, and the card will only give you the options available for that setting. So, if the setting only has 5 options you won't be able to set it to 9. You just set up that ESC all wrong, unless some of the settings lined up with the settings on the card.

@Van_City

Жыл бұрын

I was only showing an example of what the programming card was capable of. You are correct it all depends on the esc that is being programmed and the capabilities it has

Nice video as allways. For my vrx cobra what program card I have to buy? Suprass hobby? Thanks in advance.

@Van_City

2 жыл бұрын

I’m not 100% sure. I’ll look into it and let you know

@RC-gj7kq

2 жыл бұрын

@@Van_City ok perfect. Wait for your answer. Thanks a lot

@Van_City

2 жыл бұрын

@@RC-gj7kq Spoke with my friend who owns one and looking at the esc it should be able to be programmed with the programming card I reviewed in this video. 👍💯💥

@RC-gj7kq

2 жыл бұрын

@@Van_City will be nice. How I can contact him????

@Van_City

2 жыл бұрын

@@RC-gj7kq I will let him know you would like to contact him.

Hi, will this programming card work with wltoys oe esc?

@Van_City

7 ай бұрын

I’m not sure, there’s a chance that it would

@adamc5702

7 ай бұрын

@@Van_City I found one video on YT that it won’t work.

friend how to reverse the side to turn the engine, my engine is turning to the wrong side, even in reverse on the radio the engine continues to turn wrong, can you help me?

@Van_City

Жыл бұрын

Your motor has 3 wires which are plugged into the esc. Take the 2 outer wires and switch them, that will reverse the motor direction

@joealbuquerque5557

Жыл бұрын

@@Van_City I already did that and it didn't work, it made a strange noise in the engine, I reversed wire (A) and wire (C) it didn't work

@Van_City

Жыл бұрын

@@joealbuquerque5557 what esc are you using?

Trying to find this card with that description is not easy. The one I found that looks like that says it's a ROCKET V2 programming card. There's no difference, right? Being able to set the drag brake value is important. If you need it, that's fine. If you don't and you don't eliminate it, you get instant 100% brake as soon as you ease up on the throttle!

@Van_City

Жыл бұрын

Just noticed the link I had in the video description is no longer active. here's the new link. s.click.aliexpress.com/e/_DBYeHJ9

@kodak_jack

Жыл бұрын

@@Van_City Thanks. It looks a heck of a lot more useful than the original one.

@Van_City

Жыл бұрын

@@kodak_jack it is. A lot more settings can be adjusted with this one

Mine has 15 options?

@Van_City

Ай бұрын

I believe they’re set up for additional programming options

Hi! When you have plugged in the card, it scrolled until parameter 15... But you stopped at parameter 9.... Do you think you really have parameters 10 to 15 too? What are they? I have almost the same esc ( kk v2 80a ) and programming card and on the instructions its 13 parameters but when I plug the card it goes up to 15... i am confused a bit..

@Van_City

Жыл бұрын

I’m not sure why it goes past 9 as it is only supposed to have parameters to 9. There’s a possibility 10-15 work, I might try and see

@sdb5440

Жыл бұрын

@VAN CITY RC ok, maybe you can try the parameter 11 that is the turbo timing. The default value is 1 then 0 degree. You can then try to set it at the value 7 that is 60 degrees. If you do not see a difference, then we can think that the card can only read the value but is not able to set it.

You set the punch to 4 ? Wouldn't that increase your punch level high.... The card shows 5 being very high and 1 low punch ..

@Van_City

2 жыл бұрын

I believe you’re correct 👍💯

Hola alguien sabe cuál sería la configuración o si es compatible para Crawler

@Van_City

Жыл бұрын

Sí, sería compatible con la programación de un rastreador. Siempre y cuando su esc sea programable con esta tarjeta

@ismaelrodriguez1973

Жыл бұрын

@@Van_City buenas noches es el ESC Rocket V2- pero no se cuál sería su configuración,si me pueden dar alguna idea os lo agradecería

what esc are you using?

@Van_City

2 жыл бұрын

60amp surpass hobby

BEC voltage is missing in this card

@Van_City

5 ай бұрын

You’re right it doesn’t have an option to adjust the BEC Voltage

@Marknewell273

5 ай бұрын

​@Van_City is there any way to change it on a surpass esc, 45a in my case. I saw it done to a 150a esc using a jumper plug, youtube video "changing input voltage..". I can't find any surpass program cards that show BEC adjustment, only saw it on a hobbywing program card

@Van_City

5 ай бұрын

@@Marknewell273 I’m not certain there is a way. I’ll have a look at it and let you know if I come up with anything

Yeah I just got mine and every time I plug the esc in.. it reads E R R

@Van_City

4 ай бұрын

Hmm the ESC you’re trying might not be programmable or compatible with this programming card

@lyte1981

4 ай бұрын

@Van_City yeah I was wondering the same thing eventhough it is an aftermarket universal ESC

V2 Programming Card Available Here: s.click.aliexpress.com/e/_DBYeHJ9

Or are they both different

@Van_City

2 жыл бұрын

They’d be different

@ernestclanton8343

2 жыл бұрын

@@Van_City can I still is that motor and esc are on my traxxas bandit or Armma Tyhon Mega

@Van_City

2 жыл бұрын

@@ernestclanton8343 yes 👍

Dose your manual say anything about the reading eaa I didn't get the manual with mine and that is all it said on all three of my rocket rc esc

@Van_City

6 ай бұрын

I don’t recall if the manual refers to that or not. I’ll see if I can locate my manual to confirm and let you know

really amazing . full watched.Iam your new subscriber.keep in touch.

@Van_City

2 жыл бұрын

Thanks appreciate the support 👍💯💥