Greetings from Northern Vermont! Going on 25 years using Heated Husqvarna B&C oil with some wax on all external surfaces and ATF, B&C oil, Motor Oil, whatever I have on hand into all INTERIOR enclosed areas like rockers, fenders, doors, pinch welds, inner control arms and other suspension parts. Worked great all these years. Vehicles rust from the inside out so its good to spray thin oils into all enclosed areas in SPRING!! The warmer weather of spring and summer accelerates corrosion and expands all the metal components and allows the oils to "wick". Great videos and thanks for posting.

Hello I’ve used about all the rust proofing products Fluid Film, Woolwax, Waxoyl. Now I’m going to use Surface Shield especially inside the doors , rockers, cab corners, wheel wells. I might even use some Blaster rust buster so it creeps into pinch welds then top off with Surface Shield. It can’t hurt. Nice video

@THEWORX99

Жыл бұрын

Sounds like a good plan

I like what I'm seeing about Blaster SS. All the tests I see are very positive and last for TWO years. I just bought a 2019 Toyota Tacoma pick-up and it has almost NO rust under it and I'd like to keep it that way. So this summer I think I'll be under it spraying Blaster Surface Shield. Thanks for these informative videos.

@THEWORX99

2 жыл бұрын

Your welcome

Yes I'm definitely have to try surface Shield thanks great video

I just did my truck and my wife’s care with blaster SS. it holds on there great. If you like the black look better just put a little Graphite powder in it. It makes it look real nice and it doesn’t take much of it to make it black

@THEWORX99

Жыл бұрын

I prefer mine clear so I can yell if any rust is progressing.

New subscriber here. Since the guy bashing your videos gets paid up to $600 for a "Signature Series" undercoating application of Fluidfilm , I think it is easy to understand why he's bashing the Surface Shield product. Keep up the good work.

TIP - I just got feedback from Fluid Film and see the problem some folks are having. In its' resting state, Fluid Film will thicken over time. That's why in some videos it looks like pudding. Unfortunately, most guys are only STIRRING or MIXING the FF with a stick or paddle. That's not vigorous enough to change its' viscosity back to a pourable liquid. I would suggest a paint stirrer that inserts into an electric drill or, better yet, go over to Harbor Freight and buy their paint can shaker for $ 130. If you do your vehicle every year or have multiple vehicles then it would be worth the cost to get the FF back in the most liquid state it can be in so it sprays and covers better. Just my opinion.

@THEWORX99

2 жыл бұрын

I've mixed it with a paint mixer and it makes no difference even at 80 degrees it is still too thick to pour. Even the local shops keep heat tape on there barrels year round to keep it at a sprayable temp.

@yoho1021

Жыл бұрын

@@THEWORX99 you can cut it with vegetable oil and makes it more runny

@THEWORX99

Жыл бұрын

@@yoho1021 it would peony ash off even easier if you do that.

@ernestt4969

10 ай бұрын

I heat FF up with a hot plate after loading it in a aluminum spray gun canister and spray it before in the fall. Sprays and works great. My truck frames, springs and axles look brand new after many years. Can also cut it with soybean oil if you wish. I live in the rust belt.

Thanks for testing these for us. I'm sold on it just can't seem to find it here in Canada yet. I like Fluid Film but you're right it washes off too easily.

@THEWORX99

2 жыл бұрын

Welcome thanks for watching. No amazon? I kno it was backorder butnusualy that changes daily

@THEWORX99

2 жыл бұрын

@@tk421upgrade3 I have not even heard of it. But i may check it out. Thank you

Fluid film that's what I use, no problem with this product 👌🏽

Have you tried Corrosion Free? I have used it in Canada for 5 years, was also well rated by the Canadian Army in a comparison test (although the test is old). Not sure it is lanolin based, but it's rubber safe, and creeps well. Would be nice to see a show down with Blaster Surface Shield.

@THEWORX99

Жыл бұрын

Ill pick some up one of these days!

You have no idea how happy this video make me! I literally had that moron commenting on my SS videos yesterday. Thanks for proving both of us right! I would reply to him, prove him wrong and he would delete his comments. I got the same lecture how the product is 70% solvent which is complete bull. If the product is 70% solvent, 70% of that 5 gallon bucket would have evaporated. You and I both know it didn't lmao. @steel city undercoating

@THEWORX99

2 жыл бұрын

Yeah I replied to him several times.. Thanks you! Your videos the reason I discoverd ss in the first place!

@RepairGeek

2 жыл бұрын

@@THEWORX99 the other thing was he kept saying how "dangerous" this product was to breathe. FF cant be good for you either. It's like the vaping croud talking about how much better for you vaping is than smoking 🤣. Either way the stuff could screw you up lol Keep doing what you are doing man. I'm just a guy in a garage just like you. Do what you're interested in and passionate about. 1000 subs will come with time. It took me 14 months to get to 1000 subs. I'm averaging between 1500 and 3000 a month currently. My mentality hasn't changed. I do what I'm interested in and passionate about just like I have always done. The views and subs will come. Just keep at it.

@THEWORX99

2 жыл бұрын

@@RepairGeek he said the same to me. And I kno when I was spraying fluid film outside I would feel like I had smoked a ciggarete. And I agree its all the same. I told him you've got to wear a respirator either way if your worried about it. Dosent matter the product your still breathing it in.

@zedpuddable

Жыл бұрын

Thanks to both you guys only trust the 2 of you for this kinda info awesome you guys watch each others video's!!

Surface shield is good stuff I used 6 cans of it on my new ram truck 👍

So if Im planning to use a product on my new to me vehicle that has small amounts of surface rust.. would you still recommend surface shield over the others?

@THEWORX99

11 ай бұрын

I would yes. Recoat every year.

What are you using to spray Surface Shield? If a HVLP Gravity Feed Air Spray Gun, what tip size & PSI?

@THEWORX99

2 жыл бұрын

Im using a standard undercoating gun used for woolwax ect.

Have you tried RP342? It’s report-ably a military grade rust prohibiting treatment

@THEWORX99

2 жыл бұрын

I have not.

I tried Blaster last winter on a limited basis/small area under car and seamed to work well. One caviate however - I sprayed inside bottom of door panels as always but this product obviously has more solvents in it and it softened and distororted the rubber door weather stip at the weep hole locations where the material weeped out and layed against it. Not totally melted or destroyed but I wont use in any location in contact with rubber again. Hoses??? Too much a bother to avoid too many things so Im looking at something else this winter. So far over the years, Boeshiels T-9 has worked the best for me but is the most expensive of all the products tried. I have something new that I havnt heard of before that a friend tipped me off to to try this year.

👍👍👍🇺🇸🗽🇺🇸 thanks for sharing Good Stuff 👍 The Vermonter

@THEWORX99

Жыл бұрын

Thanks 👍

What if you apply surface shield let dry and the apply FF under a lawn mower deck, any thought ?

@THEWORX99

2 жыл бұрын

So take a clean mower deck apply the products the that? They dont dry. But you could let it sit for a day or 2. And then what mow the lawn? And see what sticks better? Or just use the hose cleanout port and run the deck that way to see what washes off better? I like the idea.

@tomgreen1721

2 жыл бұрын

@@THEWORX99 Hey thanks just bought the mower haven't even used it yet, thinking about using both SS and FF at the same time

@THEWORX99

2 жыл бұрын

@@tomgreen1721 do it.

How does SS effect rubber...like bushings, hoses, etc?

@THEWORX99

Жыл бұрын

Haven't noticed any damage

@ryan6391

Жыл бұрын

@@THEWORX99 thanks!

Thank u for ur analogy! I had mine coated by a place & used FF. I wpuld LOVE to spray SS but I have no equipment. I wonder if I buy a cheap electric sprayer if it'll work w/SS? I gave u a 👍 & sub'd!

@THEWORX99

2 жыл бұрын

Thank you. A regural electric sprayer won't work. The ff or lanalin guns on Amazon are like 50 bux tho.

@drcoffee5588

2 жыл бұрын

At 70*F

@nicholas2932

Жыл бұрын

honestly my plan until i get a compressor was to just use the spray cans for 90% and use FF cans with the long hose attachment to get inside the frame to get me to 100%... you can probably heat SS up and spray it from an electric sprayer but i cant find anything that has a hose attachment. everything on amazon is intended for paint on flat exposed areas....

Yes the fluid fill my hate the smell of it too I used it one time spread the underneath my truck give me a pounding headache

dude I just ran through the leagal stuff for surface sheild and it is solventless totally safe for the environment isnt that crazy!! I got you dude I just subscribed. I got a can of the surface sheild from harbor frieght the other day because I am having to clean out my wheel wells in 3 different trucks and the rust was just killing me man. I saw this stuff and thought it was just penetrator like the orginal version you know but just will like a rust prevention additive which was like dope. Since I didnt wanna have to do this all again you know... Well I get home and start cleaning and the freaking rust just turned to mud dude like litterally it just bubbled up then 10min later was a black sludge that wipes off!!! its amazing!!! sometimes you gotta use like a hard bristled brush or a metal brush to get it all the way threw and then off cuz the surface sheild wants to stay on the metal you know so it will like hold onto the clumps sometimes and like stick a bit so you cant completely wipe it all off. So yeah you are totally right this stuff is great! and your parts that you didnt get dude all you got to do is spray em like you dont have to wipe it off even it will just like turn the rust into sludge and then when your ready to wipe it off you can but the longer you leave it on the better it looks later... well I mean sort of like sometimes it stops working and then the rust well the rust it didnt get to like if it was thick and it could only surround it.... that rust will show again when you wipe off the surfface sheild sort of like a jaw breaker does when you suck on it then rinse it off ... that was the best example I could think of lol. Well yeah so keep up the videos

@THEWORX99

2 жыл бұрын

Thank you. I will

Project fam tested a few and CRC was rated the best

@THEWORX99

11 ай бұрын

Yeah I saw, just not avail in bulk for spraying as far as I kno.

Do you think it is worth double the price as Fluid Film and do you trust it can go two years ?

@THEWORX99

2 жыл бұрын

So far its held up and is defiantly worth the extra in my opinion. FF would have washed off many time over by now. Im going to recoat with as every year just because.

@nicholas2932

Жыл бұрын

realistically. if your trying to protect your 70k$ investment for as long as possible the increased price still puts it within a reasonable price tag... but if your just throwing it on a lawn mower for the winter for just some form of protection a cheaper product will serve that purpose just as well.

@THEWORX99

Жыл бұрын

@@nicholas2932 exactly.

@Plainsimple67

Жыл бұрын

@@THEWORX99 I LIKE FLUID FILM SPRAY ON PROTECTING FIREARMS FROM RUSTING, THE SURFACE SHIELD STOP SPRAYING, MAYBE IT WAS A DEFECTIVE CAN, THE FILM FLUID WORKS GREAT AND IT SAYS IT ISN'T TOXIC!!🤷‍♂️

I bought some Surface Shield in a spray can and put it on some sections of my truck. It does not dry. I would hate to have all that stuff everywhere underneath my truck. What a mess that would be. CRC Marine seems much better

@THEWORX99

10 ай бұрын

I might have to try that.

I was just on Amazon reading the bucket label for Surface Shield. It states - NON-toxic, LOW VOC, safe, lanolin-based and they've balanced the formula so it can also be considered a lubricant. So there is "some" solvent in it but so is there in many of our daily garage products like BRAKE, CARB, MAF cleaners etc. If the low VOC means that it sprays better then I'm all for it. It's either spray a fine mist or throw pudding at your car. Which do you think will cover and protect better?

@THEWORX99

2 жыл бұрын

So far the surface shield has held up far better in the short term on the vehicles I have done.

I use s s

My goodness bro, you need a bigger shed.

@THEWORX99

2 жыл бұрын

Yup. The shop need expanded!

All these different claims by critics of one or the other are dumb. Read the MSDS for each. Whatever you do, do something, which is way better than doing nothing.

I like fluid film. New Hampshire oil is trash.

@THEWORX99

2 жыл бұрын

Ok

mmmmmm,........ sheep dip.........

Fk it I’ll use spray cans

Corrosion Free Rust Cure Formula 3000 #1 in Canada.

@THEWORX99

Жыл бұрын

I will look it up and see Thanks you

haha fluid film for the win.