Surface Modeling in Fusion 360 | Intermediate Only
Download reference image: productdesignonline.com/knife
IMPORTANT: This lesson is intended for intermediate users. Prerequisites: have a working knowledge of Fusion 360 sketches and solid modeling; some basic surface modeling is ideal.
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ / productdesignonline
2. Buy Kevin a Coffee ➞ www.buymeacoffee.com/pdo
TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/knife
2. My checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
SUBSCRIBE (& Hit the Bell!)
bit.ly/sub-right-now
TIMESTAMPS
00:00 - Surface Modeling Knife in Fusion 360
01:00 - Setting up sketch geometry
02:21 - How to surface model Fusion 360
02:40 - Extrude a starting surface
03:20 - How to Surface Loft in Fusion 360
04:30 - Extend a surface when surface modeling
06:03 - How to fix incorrect surfaces
07:27 - Trim away excess surfaces Fusion 360
08:23 - Sharpening the knife edge with Surface Sweep
09:10 - Patch and Stitch the surfaces
10:00 - Final tricks for surface modeling
-
#Fusion360 #ProductDesignOnline #surface
Пікірлер: 20
How'd you feel about this *Intermediate* tutorial? Would you like to see more *Surface Modeling* ?
@ER-zv1nr
2 жыл бұрын
i couldn't keep up but i am beginner level.. hopefully in a few months i will be able to reference this video and understand everything. Thank you for taking the time to share these advance features.
@raisincosplay
2 жыл бұрын
Yes! More please!
@emanggitulah4319
2 жыл бұрын
Yes please... That would be awesome
@harshavardhan4699
2 жыл бұрын
definitely need more of this !!
@printing3d722
Жыл бұрын
Yes, would like to see more of this kind of modeling. Thanks!
Yes to surface modeling
Yes! More surface modelling please. your video's have been my favorite since I got stuck at home in 2020.
@ProductDesignOnline
2 жыл бұрын
Thanks for your support, Tony!
Hey Kevin !! I was using creo parametric for a while but a few months back when I switched to fusion 360, I found it was on a whole new level in design environment making it one of the most powerful designing softwares out there. That's when I came across your channel and I want to say that you're doing such a great job helping beginners reach their potential in fusion 360 😄. Thank you...
@ProductDesignOnline
2 жыл бұрын
Thank you, Harsha! I appreciate your support and glad to hear you're enjoying all of the content :)
Excellent video. Perfect speed. I was able to follow it and understand it as you were going. I was able to guess what commands you were going to use next. Yes on future surface modeling videos.
@ProductDesignOnline
2 жыл бұрын
Thanks, Tony! Hope all is well with you 😃
Download Reference Image here: productdesignonline.com/knife
Great video! it should be mentioning the blade tip top should be a straight line, not a spline, otherwise loft won't work. It's omitted from the video. Each line matters.
I prefer to use the mirror command at the end of the time line and only draw half of the shape. This will usually make the design more stable. Also I would make a spline just for the lower side of the blade, rather than for the whole lower knife. Thank you for sharing the video
Hi Kevin, would you consider doing a video on setting the toolpath for the handle scales? Can not find one anywhere.
@ProductDesignOnline
2 жыл бұрын
Hey, thanks for the video idea! Can't commit to anything at this time, but have added this to my 'CAM tutorial ideas' list. I always appreciate video topics/suggestions, so feel free to share ideas any time :)
@nouveauwebsitedesign1890
2 жыл бұрын
@@ProductDesignOnline Thank you so much for answering, most don't. Looking forward to your next video.
@ProductDesignOnline
2 жыл бұрын
@@nouveauwebsitedesign1890 You're welcome. I try to answer as many as I can :)