Good as Always.😃

I don’t know if you’ve had any troubles with the surface conditioning belts clogging up or anything, but I wanted to share that you can spray them with some WD-40 and use a brass wire brush to smooth it out and that’ll make them last a little longer while making it condition the steel like it did when brand new.

@gentrycustomknives8008

3 жыл бұрын

Awesome tip thank you!

What’s the deal with cork? Charge with compound? You could probably spend $200 and be able to start a with a flat heat treated knife, and finish with a mirror polish. Crazy. Too bad I do t have a vfd. I’m going to experiment with using a foot pedal and fluttering 😂 Questions about trizact: do you prefer the gator belts or the non “fluted” kind ones? Have you tried combat abrasives competitor? Starts at 400 grit and up.

Thanks! Keep the great work up!

@gentrycustomknives8008

3 жыл бұрын

Thank you!

Thanks for the vid. I've always been partial to the fine belt. I found the coarse belt put some fairly deep scratches in the metal as I later decided to do a full polish. I had to go back to abrasive belts to get the scratches out. Sam is right, WD40 on the SC belts works beautifully.

@gentrycustomknives8008

2 жыл бұрын

Yes I’ve noticed that too, the course is VERY aggressive!

I love the medium belts for finishing, exactly what you're talking about here they work fantastic. I wish Red Label made them for my 1x42 Kalamazoo because I love their products and been using them since I started back in December, it's the only belt they don't make in that size but I've reached out to them and they said they're going to try and add them to the product line in the future. Another great vid!

@gentrycustomknives8008

3 жыл бұрын

They are always very good when it comes to stuff like that! Thank you for watching!

This video was extremely helpful! I was wondering how I could get a beautiful satin finish on blades and you answered my question, appreciate the info! New subscriber and your channel is awesome, you create some gorgeous knives!💯💯

@gentrycustomknives8008

3 жыл бұрын

Wow well I really appreciate that! Glad I could help!

Awesome video thanks

@gentrycustomknives8008

3 жыл бұрын

Thanks for watching!

Cool man

The first time I used a trizact and scotch brite belt I was in lala land

@gentrycustomknives8008

3 жыл бұрын

They are absolutely game changers!

I just came across your channel. Question when you use different types of wood to make a laminate handle what do you use to glue the slabs together? Thanks Randy Wallis

@gentrycustomknives8008

Жыл бұрын

I use a good 2 part epoxy. amzn.to/3Jdyonw

What are the chances your video was the first recommended and I'm wearing the exact same shirt? 🤣

@gentrycustomknives8008

Жыл бұрын

Lol time to buy a lotto ticket!

How would you clean them? They load up pretty fast.

@gentrycustomknives8008

Жыл бұрын

I don’t clean mine

Can you help me out? I bought the yellow polishing belt from Red label abrasives. It came with the white compound. It doesn’t seem to be loading up on the belt and it’s not really putting a shine on my metal parts. What could be the problem? Any help would be appreciated. Thanks.

@gentrycustomknives8008

2 жыл бұрын

I’m right there with you! I have the same belt, loaded it up with green compound and tried using it after a medium scotch bright belt. It added a little shine to it but I haven’t used it much other then that. I need to mess with it a little more I think.

@bdcfu

2 жыл бұрын

@@gentrycustomknives8008 so what do you recommend using to put a good shine or mirror finish on? That’s what I thought this belt was going to do. What would you use to clean up an old pocket knife to restore it?

@gentrycustomknives8008

2 жыл бұрын

Surface conditioning belts! Or hand sanding

Sweet dude I’ll have to pick a couple up. Fuck hand sanding am I right??

@gentrycustomknives8008

3 жыл бұрын

EXACTLY!!!!! 👊👊

Bought 3 medium this week funnily enough. Been using small versions for years that go on a foam drum that goes in a drill, use them for putting mitres on stainless box section corners after welding, grinding. wethersfieldweldinguk Instagram thanks for the follow 👍 Only made 2 knives out of Farrier's rasps now everyone wants one😳

@gentrycustomknives8008

3 жыл бұрын

Awesome to hear, and thanks for watching!