Armageddon Link is in the Description Do you run Suppressor Covers, if so which Brand..and your opinions on them? Thanks for Watching, Carry On

@mikeyob4271

Ай бұрын

Does your cover charge your point of impact? 25yrds ,low 6 o'clock 4,6 inches low. Same ammo

Excellent review! I'm in the market for some suppressor covers and I was glad to be able to watch this.

@BigJohnsonGG

Жыл бұрын

Thanks for Watching, I appreciate your feedback!

Waiting on my permission slip/tax stamp from the atf. I purchased the Armageddon the day i paid for the suppressor. I did my research and just like your review it was the best.

I run Suppressor Co. works great for gem tech, I bought 6” for 5” suppressor though and zip tied end. I’ll put 250 rounds down and can still grab suppressor. With that said, funny you pointed out the metal brackets. I just got home from range. I have a small burn on finger and couldn’t figure out where it came from. As you pointed out brackets, I looked at finger and said “hmm, well would you look at that” hahahaha

if the color of the sleeve bothers anyone. Paint it with black header spray paint.

This video has convinced me to place an order with them. Ordering for a Hybrid 46DTM I love the look of the black multicam.

@BigJohnsonGG

4 ай бұрын

I’m still using it with zero issues.

added the link to my favorites and will be buying one very soon thank you

@BigJohnsonGG

Жыл бұрын

Thanks for Watching

Dude. I wish I knew before I bought mine. 5000+ rds and it always flys off

Burn proof gear makes the best cover. Expensive but by far the best.

I just ordered one so here’s to hoping it works better than the Silencerco one that I accidentally shot off the end of my suppressor.

The tan one looks nice but, not being able to catch the ends will never stay in place.

I've never tried a supressor cover before actually. I've wanted to try one but I run my Dead Air Sandman S under my rails so a cover wouldn't really work as far as clearance. Good video as usual Big J 🇺🇸

@BigJohnsonGG

3 жыл бұрын

Thanks brother, you need a hot pocket cover for your rail. Carry on

Thanks for the info. Trying to figure this world out. Not paying $200+ for a freaking cover.

@BigJohnsonGG

Ай бұрын

Thanks for watching.

Thanks for sharing!

If you would like to review our suppressor cover heavy, please shoot us an email. Guarantee that you'll love ours! Great review either way, you make some good observations. Metal on a suppressor cover is a bad idea...

@BigJohnsonGG

2 ай бұрын

Thanks for watching. I just sent y’all an email.

I have the Cole tech cover on my hybrid 46M , in the full configuration and it doesn’t slide off

@BigJohnsonGG

4 ай бұрын

That’s who makes the model I show, that was coming off.

In the 60s and 70s. We could get a roll of asbestos from the local Speed shop. You know before asbestos was bad for you.

i found the same issue with "suppressorco" on an omega30 shooting 300blk subs....like how?

Spicy Fifi.

Any idea if they ship to Europe?

@BigJohnsonGG

Жыл бұрын

Not sure you would have to email them & ask?

I had a suppressor cover, probably not a real good one, to me it held too much heat and it smelled like it was melting so I got rid of it.

@BigJohnsonGG

3 жыл бұрын

Probably wasn’t a high temp, You still have to slide them back to let both cool.

@KeanonGilliamSlang369

3 жыл бұрын

@@BigJohnsonGG 👍

Fyi. Depending on the gun, take the excess, create a loop, put it behind muzzle device and pull tight. Won't move

@BigJohnsonGG

3 жыл бұрын

This version doesn’t tie in the rear.

@MrMedia636

3 жыл бұрын

I'm talking about captive end of Bungie

Can titanium cans handle the additional heat that’s trapped for semi-auto 300 BLK subsonic? I wasn’t sure if the baffles will erode faster.

@BigJohnsonGG

2 жыл бұрын

Q says it can on the Trash Panda. I’ve been sliding my new cover back to release heat.

@compositetiger

2 жыл бұрын

@@BigJohnsonGG Okay, thanks. I was trying to decide between the Nomad L and Nomad LT. I think I need to go with the steel variant to be safe.

Nice review!just sent in my paperwork to atf for my trash panda

@BigJohnsonGG

3 жыл бұрын

I love mine. Thanks for Watching, Carry On

Let me guess ? SilencerCo ?

@BigJohnsonGG

Ай бұрын

Yes, but it’s actually really made by a soft goods company for them….that I won’t name.

does the over reduce the cooldown speed of the suppressor, I am thinking of a negative to having a cover, such as longer wait times, to have it cool off, vs not keeping it covered

@BigJohnsonGG

2 жыл бұрын

It does keep it warmer. However after you shoot you can then pull it back to let it cool.

@oscarbear7498

2 жыл бұрын

@@BigJohnsonGG hi thank you for answering my question :)

@BigJohnsonGG

2 жыл бұрын

No Worries

Great Info!

@BigJohnsonGG

3 жыл бұрын

Thanks, just sharing my personal experience with them.

I had a cover but don't use them, my qd won't release until the can has cooled off.

@BigJohnsonGG

3 жыл бұрын

Without one, When I transition to my pistol it’s lands right on my left leg. 🔥

@EastTexasOutlaws

3 жыл бұрын

@@BigJohnsonGG Ya, I know they have there place, I just lazy shoot around here and move it to different platforms quite often.

I shot 2 covers down range but not having a cover makes you not want to go shooting it

Do you have any discount code ? Need a cover for my YHM turbok

@BigJohnsonGG

3 жыл бұрын

Unfortunately I don’t. Mine was 79.00 + 6.50 shipping. Thanks for Watching, Carry On

@bryanduchane2371

2 жыл бұрын

@@BigJohnsonGG check out the Weka covers. They are less than $25. It's a high temp silicone cover that slides into your can and won't come off and greatly reduce mirage!!!

Let me summarize, one of two covers fit. The first shown did, the second one shown wound walk itself off the end of his suppressor no matter how tight he tightened it, END OF SUMMARIZATION! WASTE OF NINE MINUTES!!!

@BigJohnsonGG

Жыл бұрын

So glad you enjoyed the video, make sure and keep that super positive attitude that you possess! 🙄

Burn proof gear covers or nothing...