so bright lol

@JustinShinoda

5 жыл бұрын

Panda Xxpress Projects hehehe

@braxtonmoses2137

3 жыл бұрын

I realize it's pretty randomly asking but does anyone know a good place to watch new series online?

@kingstonroland7371

3 жыл бұрын

@Braxton Moses Lately I have been using Flixzone. You can find it on google :)

Your videos keeps getting better and better!!

What did you use to remove the spray off the tires😞

So you didn’t have to run a blade around the tape? It just peeled without pulling? How many cans per wheel?

Sweet brother

How long does it last

How many sprays needs per wheel??

The more and more I see that stuff the more I want to try it.. how is it on peeling compared to plastidip ( with proper coats)

@JustinShinoda

5 жыл бұрын

Oh it is soooo much easier. Its way better and looks cleaner too.

You say plastidip was hard to take off but you made a video of peeling off superwrap and you couldn't even take it off without having to pressure wash because it was coming off in little chips. Can you please clarify and peel off your green superwrap and show us how the peeling process of it is?

They look badass. Came out good. You think it will come out clean on plastic?? Dirt bike plastic??

@JustinShinoda

4 жыл бұрын

I don't see why not! Try it out! You can always take it off if you don't like it!

I got the gloss black still waiting for it in the mail great video man cant wait for mine

@ZillaFullBoost

5 жыл бұрын

boostinmk7 ca nice bro, I just did my Grom wheels last week. If you like Grom content check my channel out 🤙🏽

@bigblakandback

5 жыл бұрын

How did it look? I’m getting the gloss black as well

@boostinmk7ca853

5 жыл бұрын

@@bigblakandback bro dont put this on your car I had it on for a week and it started chipping I put all 6 cans plus the clear and its literally the worst product sorry man but I'm being honest I know how to paint with cans I've done my rims with plastic dip and paint never had a problem with either but this just looks good after u put the 6 cans on but when u put the clear is makes them look like shit o and you cant ever get ahold of customer service besides email and they only offer you a 50% off ur next purchase and make u feel like it's your fault bro just do yourself self a favor and send it back plastic dip is not as good looking but performs under real conditions besides stopped at a car show

@ZillaFullBoost

5 жыл бұрын

boostinmk7 ca my wheels came out fine. It’s been over 1000miles and no chips or anything.

@boostinmk7ca853

5 жыл бұрын

@@ZillaFullBoost bro I did everything right plus the prep maybe different colors wear better lol idk but literally after one week came the chips I live in California

Do you think this would be more durable then plastidip on my motorcycle fairings?

@JustinShinoda

5 жыл бұрын

Oh ya it will. It will also look like paint way better than plasti dip. #ditchthedip

So I bought some rays 57DR off someone that used the super wrap and I want to peel it off but i have tried everything and cannot get it to come off at all. I've tried a pressure washer as well and that's not working either. Any recommendations?

@JustinShinoda

5 жыл бұрын

Ryan Porter Hmm are you sure it was super wrap? Try a 0 degree pressure washer tip. watch my review video cause i take it off on that video!

@rporter996

5 жыл бұрын

Justin Shinoda I mean I'm taking his word for it I asked what he used and he said super wrap. And Ill have a look at it thanks!

Bro you make it looks so easy!! Did my first kit from super wrap for glossy black, and it was a total “fail” don’t know why it just come out matte looking like plasti dip.. had about 10 coats before gloss finish. Guess I’ll just have to redo them and I just little took it off my wheels like 10 mins ago using your pressure wash method.

@JustinShinoda

4 жыл бұрын

Just make sure to wait a good amount of time between coats!

@Xxaznboyzxx14

4 жыл бұрын

@@JustinShinoda I'm about to superwrap my rims too, how long do you usually wait between coats?

@silviusoporan9556

3 жыл бұрын

If the humidity is too high it will become mate and fuul of spots.The humidity has to be 60% MAX and temperature at least 70.

@silviusoporan9556

3 жыл бұрын

@@JustinShinoda stop giving advice.You ruined your tires,you don't know what the hell your doing.After you paint at least 30 times you can make a video about it telling people what to do and how to avoid stuff happening.

@VoltisArt

3 жыл бұрын

@@silviusoporan9556 he admitted his mistake in the video so people can learn from it. The whole point of the internet is to leave behind the elitism of paper printing and other media that required corporation money to share what you want to say with the world. It's up to viewers to decide what content is worthy of their time. Stop giving _bad_ advice. You ruined your social importance, you don't know how to talk to people. After you learn to stop being an internet bully, you can tell people what to do.

If not applied correctly, even that won't come off right. It's a fact that plasti dip, if not applied correctly with enough coats it will be hard to peel off. Just like superwrap. It looks good for now let's see how it goes when you peel yours off.

@JustinShinoda

5 жыл бұрын

Eh, I had experience with this product before. It in fact comes off very easily.

What is the cost of this project

@ZillaFullBoost

5 жыл бұрын

nebuer airec my Grom wheels cost 50ish dollars, but it’s two small tires. I would think another 70-100 for car wheels.

If you pay attention to detail, you can put tire dressing on the tire before the spray. Must be vary careful tho to not get it on the wheels.

@VoltisArt

3 жыл бұрын

Tape masking is so much easier and repositionable without needing chemicals to clean off mistakes. Also, any spots you missed or accidentally wiped off are painted.

15 coats and it was chipping after a few days of driving. Looks good for a trailer queen or a photo shoot.

@JustinShinoda

5 жыл бұрын

oh sorry, but should I put godzilla on my subaru like your jeep?

@duaneknight631

5 жыл бұрын

You can if you want, I just sold the Rubicon so you can also have the 17k of parts I took off for the subaru. I’ll Let you know when I start my channel for my trackhawk. You can see it on mod2fame for now.

Superwrap

Do you have to take wheels off?

@JustinShinoda

5 жыл бұрын

Yes it is recommended. Makes it very easy.

@iStriveX

4 жыл бұрын

Justin Shinoda does lug wrench or a impact wrench scratch the paint once u put them on?

Sweet bra! Nice content..I just did my grom wheels in gold and it came out sick! I’m never using plasti dip either! Check it out on my channel some time 🤙🏽

@JustinShinoda

5 жыл бұрын

ZillaFullBoost No way send me a dm of the wheels!!

But why though? Wouldnt it be better to just use real paint? I mean taking that shit off is just as much work as sanding the rims.

I have three questions hopefully you can answer.. 1. How many cans did you get for the base coat? 2. How many cans did you get for the neon green? 3. How many cans did you get for the gloss finish?

@JustinShinoda

4 жыл бұрын

3 cans were used in the Base coat, and color coat. I think I used one or two for the final coat. They have a paint kit on their site too!

@MegaMamba1042

4 жыл бұрын

Justin Shinoda sounds good! Also since I’m going to paint my alloy wheels (they are chrome silver at the moment), to black, will I need to have a base coat or can I just go straight to black after cleaning?

@RC-bx6cn

4 жыл бұрын

You only have one question, “how many cans did you use?”

@MegaMamba1042

4 жыл бұрын

R C no it’s different.. for example- if Justin said “I used 10 cans”, then that would have me confused because I have to guess what cans he is using you know? So me asking those three questions, I have the precise answer of what cans to use rather then me messing up my paint job by guessing what cans to use

I find it hard to believe this guy was dumb enough to not cover his tires.

Bruh. You can see where the "paint" bridged to the tape and left jagged edges on your spokes. It looks like shit, lol. The color is cool, but your application is lacking. Plus, we can tell that you're shilling.

@JustinShinoda

3 жыл бұрын

woot woot! Double feedback!

If u applied the Plasti dip like u did this stuff then u did it wrong. The 1st coat has to be applied thick & u need to spray it close up, like 5-7in from wheel. If u apply Plasti-Dip correctly, it's pretty damn easy to remove. This stuff looks like it's a bitch to remove. I can't believe you did that to those gram lights!

Garbage product guys waste of money just powder coat it professionally waste of my time