I'm pushing 70. Thanks for the video. Made feeel 18 again. Peace

I've had a few of these. The only two issues I've found with these 1. It should have had a 5.4 2. 5 speed is a must This chassis is just fun, for a 4400 lb car it drifts very well without any fancy steering mods. Ford made a mistake discontinuing this chassis and not updating it one last time.

@maxtrigga9952

Жыл бұрын

Thank goodness it didn't have the 5.4

@robsorgdrager8477

Жыл бұрын

@@maxtrigga9952 why do you say that ? They could have kept the 2v pi headed 5.4 alive in this and it would have been direct competition for the dodges.

Subscribed! I have an 04 marquis and an 03 marauder so I love the panther content. Marquis is one of my daily drivers and marauder getting a complete restoration. I will keep watching

I absolutely love this type of content. Fast and very well done. The world moves fast and so do I. Very well done.

seeing a lot of folks doing similar with the vics especially now that there are literally 1000s of them on the street in ex-police car form, my 02 p-71 project car being one of them.

Im sorry but after all that work why would you not include some street pulls?

@BoostandBadHabits

5 жыл бұрын

Rain. We actually took it to the track after we finished it and planned a night of racing only to get rained out and didnt really want to put off uploading the video any longer than i had. I can make another video of the car on the street though. Haven't really done anything with the car since.

@carstuff4558

5 жыл бұрын

@@BoostandBadHabits yes please I wanna do something similar or a turbo on my grand marquis that i cant get rid of since it was willed to me Just wanna see how it is first Or if i should cut the bull shit and go straight for ls swap

@P71ScrewHead

4 жыл бұрын

@@carstuff4558 ls swap is gay, shoulda gone Caprice cop car instead in that case..

@rickywittner8885

4 жыл бұрын

@@carstuff4558Triton 5.4

I'm so proud of you I've been watching all your past videos and just wanna say I'm proud of you and you know what I'm talking about

Even super or turbo charging a Lincoln Town Car is a must. There is nothing wrong with that!

nice setup I like it the supercharger but on my grand marquis I want to swap to 32 valve and then supercharged

@rickywittner8885

4 жыл бұрын

Swap a 5.4

@shartingfish5761

4 жыл бұрын

It's a waste, unless you find a terminator the 2v is a better motor, just heads, cams, exhaust and intake manifold will get you over 300hp.. if you get a saleen or roush m90 and bolt it on with a retune 400-500hp all day.. you will need to do some transmission work though otherwise you'll nuke it..

@02lsev8

4 жыл бұрын

Trust me its worth it in the end I have done a full blown marauder conversion from drivetrain to interior and exterior in my 99 cvpi but it's costly bro

@canadianmarauder1923

4 жыл бұрын

I have an 04 marquis and an 03 marauder. Both 2v and 4v are great engines. I say use ur 2v and don’t swap in a 4v You can make big power with both. If ur a handy guy with a decent well equipped garage and can do the swap yourself then have at it. Check out Andrew Lavender’s channel if you don’t think the 2valves can make much power

@chrishernandez2490

4 жыл бұрын

@@shartingfish5761 you're out of your mind saying the 2v is a better motor than the 4v. You're saying heads, cam and exhaust will get you over 300 hp while the 4v already has over 300 stock.

if I was Big money rolling. I'd be coyote swapping my vic. this reminds me of the ADTR kit.

@crownvictorialifestyle4421

4 жыл бұрын

Tick tick tick

@danielfloyd1293

4 жыл бұрын

A Day To Remember kit

@michaeldiamond1606

3 жыл бұрын

@@crownvictorialifestyle4421 noisy valves?

@aspieotaku3580

3 жыл бұрын

Id coyote with a twin turbo kit.

Hopefully the trans. holds up ok,...I have a 01 GMQ LSE with all the bolt ons...80mm MAF,75mm TB,SCT tune by Keepum coming...MOE`S..Awesome video...

Nice setup. Always wanted a red sap. I did a fresh top end on my vic first. Thinking of doing tremec 3650 trans, forged bottom end and then forced induction

Great video. I want to do the same to my 04 crown vic. Could you let me know what something like this costs parts and labor Thanks

Good, definitely need to do a preventative timing chain guide and tensioner replacement. That's a weak point in these engines.

I am trying to supercharge a modular Ford 4.6L 2V V8 engine in a Mobility Ventures MV-1 handicap van for my 21 year old son. Talked to Summit Racing, Magnuson and VMP...without promising results. Any help?

I'm sorry is this a 2005 and up CVPI? Or a P71 05 and up? I'd like to super my 08 stock sedan Lx and need help..

@vicology9496

3 жыл бұрын

CVPI and P71 are the same vehicle. 05 - 11 Crown Victoria’s should all be just like the one in the vid

Nice man. Keep it up

I have a stock 250hp 2011 Crown Vic P7B, how much hp does doing this gain?

@BoostandBadHabits

4 жыл бұрын

Realistically enough to scatter the bottom end pretty easily depending on what pulley size you run, probably somewhere around 400-450 hp if you wanna be safe and keep the boost around 12 psi. So 150-200whp gain pretty easy. Toss some rods and pistons in it and youre good to push the blower 700+ with this particular blower.

@SKATETOSLAYER

4 жыл бұрын

TRICITIES RACING 😲

@BoostandBadHabits

4 жыл бұрын

@@SKATETOSLAYER Now how well your transmission likes that power is another story. Ours went out, but we beat on it pretty hard. So we just manual swapped it.

So nothing needs to be rebuilt with the Vic? Just a super and tune?

@WillBABH

4 жыл бұрын

Only things I done was a maf, injectors, and blower. And ofcourse a tune.

@cheeko_914

3 жыл бұрын

As long as you dont put a bunch of boost in it you dont need built internals. Same goes with any forced induction

As a shop how much would you charge to do this to another Crown Victoria? Same fabrication, same used but working parts.

@WillBABH

4 жыл бұрын

If you have every part and I just have to fabricate the intercooler piping it wouldn't be that bad I could even throw a tune on it if its an 05+ car

@Wooley689

4 жыл бұрын

Yep, you can do mine.

@radicalizedonline6825

4 жыл бұрын

@@WillBABH Hey will, I have a 2011 CVPI , could you give me a range of about how much I'd expect to get the same job done you just mentioned, not trolling or anything I legitimately am interested...my baby needs some more pep in her step man and you guy's have got me doing a lot of thinking all of a sudden.

@Commander76

3 жыл бұрын

@@WillBABH Perfect.

I noticed towards the end of the video there was a lot of wires by the cooling fans. Let me guess.... the cooling control module went out and you have to straight wire them lol. That has happened to ALL of my newer vics :/

@BoostandBadHabits

4 жыл бұрын

Spot on lol.

So can i throw crown victoria police intercepter engine in a mustang with a V6. Also its an engine swapp idea

@MrDavidelliottjr

3 жыл бұрын

Yes you can but you need thr computer and wirr harness and trans.

@aspieotaku3580

3 жыл бұрын

Cheap way to convert it to a GT lol.

Where’d you get this supercharger I’m looking to get one for my lincoln town car

@BoostandBadHabits

4 жыл бұрын

We used a 99-04 mustang gt. Kit and made our own piping. Picked it up used off facebook marketplace.

@joshuabowman2169

3 жыл бұрын

@@BoostandBadHabits did you have to make custom brackets for it as well? Looking to supercharge mine soon and wanted to use a 2v mustang kit as well

Tricities racing... like tri-cities washington? If so then hello neighbor! Hermiston oregon here. I drive a 93 Crown Victoria LX.

Very nice! Can't wait to supercharge my 09 MGM!

Hey this is great, guys. I am buying an 04 in a week. You guys ever consider putting kits together and selling them? I'd buy one.

@BoostandBadHabits

4 жыл бұрын

Thanks! Its crossed our minds a few times. We've been asked alot surprisingly..

@bobshackleyltd2302

4 жыл бұрын

@@BoostandBadHabits I bet. Well you guys could put a package together with instructions. Your discoveries could pay off for all of us.

@Velanestar

4 жыл бұрын

This. So much this. I love how the 4.6 2v sounds and how it feels like it has so much power in my 2000 lx but its soooo heavy. It needs a supercharger lol

Where is your shop located? And would you also recommend doing the cam on the engine?

Badass video Brother! Thanks for Sharing..

Hey where so you get that in line radiator cap? I need one of those for my crown vic

Gale Banks would have a shit fit if he seen that radiator heated air flowing straight into the supercharger.

@WillBABH

4 жыл бұрын

iats never got wild so id say its just fine

Would love to do something like this on my Marauder

Hey guys have an 01 vic, how much was that supercharger....ty in advance...

Yo so if i did this could i do it without doing the timing chain cover gaskets ? I just bolt it on ?

Very nice 👍 ..I gotta 03 police inceptor would love to do this too

I have an 03 vic and found a guy selling the eaton blower off a svt cobra of the same year. Would it work?

@BoostandBadHabits

4 жыл бұрын

Unfortunately not.

@killianlastname1108

4 жыл бұрын

@@BoostandBadHabits what would you suggest I get? I don't need anything too expensive however I know that superchargers typically ain't cheap either.

@BoostandBadHabits

4 жыл бұрын

Yeah not many cheap options really. They make a torktech kit that will allow you to use a stock cobra blower, but its still fairly expensive. They are having a sale on them right now but you might possibly be able to find a used kit somewhere to help with cost.

@killianlastname1108

4 жыл бұрын

@@BoostandBadHabits thanks for the info.

Yoooooo I got a p71 we gotta do this😂😂 & run them of course🤯let's work

@BoostandBadHabits

Жыл бұрын

This setup is a few years old. It's got a twin turbo Raptor 6.2 swap now

Would've been great if you'd have gave the part number on that belt. That would've helped people save a lot of trouble.

@BoostandBadHabits

4 жыл бұрын

That would depend on what pulley you're running and if you use an idler or not.

@BoostandBadHabits

4 жыл бұрын

But i can get the part# of what belt we ended up using and add it into the description for those that want to know. It may or may not be right depending on the other factors.

@BoostandBadHabits

4 жыл бұрын

O'Reilly belt part# K061130

@WillBABH

4 жыл бұрын

Problem is it depends what front cover you are using this car has a 1 bolt front tensioner off of a 98 mustang gt which uses a shorter belt that the crown vic front cover

Are you guys are located North Carolina correct

My friend, the coolant cap must be bad... It's doing vaccum on your circuit... Look those hoses...

What you do for exhaust? Aren't the stock manifolds only 2" out? Headers?

@BoostandBadHabits

4 жыл бұрын

Yeah we used Stock

I’m putting a 98 mm on a crown Vic today

Hey ham have any idea how much hp and how much was the turbo

What supercharger is rhat

Did you upgrade the fuel system?

I have a town car that looks the same. I’m in South ga. Who do you know I can pay to do this to my car.

@vicology9496

3 жыл бұрын

You can pay me an I’ll do it. Only problem I’m in MD. But my truck not statecist lol for da right price.... for real tho

Does anyone know what the p-71 or whatever is and what it changes if anything

@JR-eb2qk

3 жыл бұрын

The P 71 is the Police version of a crown vic. They were modified to handle aggressive transmission shifts .

If your cousin needs something run down to the county line, you are all set.

The bottom end is still stock??

Kevin James has a youtube channel?

8:41 😂

not a ford guy but good job bro from Canada

Does the ac still work?

Can you create a step-by-step tutorial for those of us who want to build this?

@BoostandBadHabits

Жыл бұрын

We don't have the kit no longer. The car has been swapped to a Raptor 6.2 engine and now twin turbo.

@ThePursuitofHappiness1988

Жыл бұрын

@@BoostandBadHabits can I email you guys? I have more questions.

Is the rear end stock?

Great video guys!! I just happened to run across your channel. I don’t have a crown Vic yet but I’m looking for one. I was wondering if you guys can or would be interested in installing a supercharger on my 02 f150? It’s a 4.6 2v and just a great motor in my opinion. I can pay in cash if you guys can do the job. Thanks and you just got a new subscriber!!

@BoostandBadHabits

4 жыл бұрын

Thanks, Appreciate the kind words! Im sure we could no problem. You can email willstipes83@gmail.com and talk with him about it. Hes the owner of the vic/shop.

9:27 This is what you came for

What bracket was used to bolt up the supercharger?

@BoostandBadHabits

4 жыл бұрын

We used a 99-04 mustang gt vortech v3 kit and modified the intercooler pipe to fit.

How many psi can that put out and what did it cost

@cheeko_914

3 жыл бұрын

Depends on what pulley you put ob

So you guys have any contact info other than email? If not maybe you guys can tell me what a set up like that would cost and if you would modify my 2006 vic or if you could direct me to who can... thank you

@WillBABH

4 жыл бұрын

You can message me on Facebook. William Franklin Stipes my profile picture is a bird with a headband

@WillBABH

4 жыл бұрын

Or instagram. @redfire_will

@chriscoleman1427

4 жыл бұрын

@@WillBABH i want sum info please

isnt that a turbo??

@BoostandBadHabits

4 жыл бұрын

No, its a Vortech v3 supercharger kit from a 99-04 mustang gt made to fit the crown vic.

@Daize504

4 жыл бұрын

@@BoostandBadHabits cool! absolutely badass brotha! yall my new idols with this shit!

Where did you get the supercharger from?

@BoostandBadHabits

4 жыл бұрын

Used on facebook marketplace for a 99-04 mustang gt. That we modified to work.

If you dont mind me asking what turbo setup is this....plz let me know thank u and were can order from

@BoostandBadHabits

4 жыл бұрын

This is a Vortech v3 supercharger kit for a 99-04 mustang gt modified to fit the vic

How much money did it cost to install that turbo

@cheeko_914

3 жыл бұрын

There is no turbo

@alphakilo9099

3 жыл бұрын

@@cheeko_914 super charging same thing

What tuner can you tune a cvpi with?

@BoostandBadHabits

4 жыл бұрын

Depends on the year but most use sct. We use hpt

What were the HP and Torque Numbers

@BoostandBadHabits

4 жыл бұрын

Never dyno'd it. Im sure close to 500

Anyone know if a 2005 Mercury grand marqu is a 2v???

@BoostandBadHabits

4 жыл бұрын

Yeah.

@masonhendrix6266

4 жыл бұрын

@@BoostandBadHabits it a 2v okay cool thanks for replying back have a merry Christmas and happy New year bro

@BoostandBadHabits

4 жыл бұрын

@@masonhendrix6266 No problem. Merry Christmas and Happy New Year to you as well!

@alexisdown408

4 жыл бұрын

So that would mean that my 06 crown vic is a 2v also?

@BoostandBadHabits

4 жыл бұрын

@@alexisdown408 yup.

What supercharger you use

@BoostandBadHabits

4 жыл бұрын

Vortech v3 kit for a 99-04 mustang

Nice

Add 410 ‘s gears they are stronger even 430 will make the Vic a rocket Keep doing Vic videos bro. I did mustang swap back in 2000. Check it out 99gtvic I’m locked out this page smh

@BoostandBadHabits

4 жыл бұрын

The vic actually has 4.10s in it now. We broke the 4:30s not to long ago.

I want to do the same shit same year car

That’s not a supercharger, that’s a blower/turbo

@BoostandBadHabits

Жыл бұрын

It's 100% a supercharger...

@jonathon0010

3 ай бұрын

Bro superchargers use a belt that sucks the air in. That’s a turbo.

That’s a turbo 😭

@BoostandBadHabits

3 ай бұрын

No it's not lol 😂

How much does a supercharger run for

@BoostandBadHabits

4 жыл бұрын

One like this runs about 2k-3k used depending on whats included in the kit.

Justed sub

change title to Procharged

@BoostandBadHabits

4 жыл бұрын

Its not procharged... Its a vortech v3 centrifugal Supercharger.

@cheeko_914

3 жыл бұрын

Not a procharger dumbass

Nice