I did change the supercharger oil with fresh ACDELCO supercharger oil. I took out 100ml of fluid so i replaced 100ml of fluid. I forgot to mention in this video. Hope yall enjoy the video! GOD BLESS!

@johnnymoody2740

2 жыл бұрын

Hard to find a young man that's not scared to profess his faith in God. Keep it up my young Brother 🙏🙏

@TexasHondaChannel

2 жыл бұрын

@@johnnymoody2740 I am definitely unashamed I’ll keep doing my best God bless

@johnnymoody2740

2 жыл бұрын

@@TexasHondaChannel May God bless you and your wife 🙏

@jaketulsa8348

2 жыл бұрын

Sick build bubba love from Tulsa as always

@TexasHondaChannel

2 жыл бұрын

@@johnnymoody2740 he’s a blessed us abundantly our cup runneth over.

My boi did that like he was a certified Honda Tech great job brother keep up the great work videos always 🔥🔥🔥

@TexasHondaChannel

2 жыл бұрын

Im certifiable if that makes a difference lol Thanks for the support!

I'm really excited to see this tuned and ripping. Keep up the good work brother 🙏

Can’t wait to see the hp on this build

I'm liking the direction of this RSX so far. Sharing with a buddy of mine that has one

@TexasHondaChannel

2 жыл бұрын

Awesome thanks for the share and I have way more to come so definitely stay tuned

This is awesome, I love what you're doing here

All it’s missing is a nice tuck. Beautiful work

You make it look so easy 🔥

@TexasHondaChannel

2 жыл бұрын

Luxury of video editing. The first half was simple but the belt routing was a PAIN!

@matth6284

2 жыл бұрын

@@TexasHondaChannel i bet, there's a lot of little things that can take up a lot of time behind the scenes

@TexasHondaChannel

2 жыл бұрын

@@matth6284 The longest part was doing the research for the belt diagram I’m not even gonna lie it took three hours but the stuff behind the camera takes forever like setting the tripod up and stuff like that if I was to just go to work I could have it done so fast

That coming togueter bro, awsome, exited to see how much it will make, wishing you the best bro, keep up the good work, God bless

@TexasHondaChannel

2 жыл бұрын

Thank you 🙏🏻 i appreciate your help and support! God bless!

I don't care what kind of car it is, that supercharger whine is amazing. I wish mine had that whine but roush made it quiet for some reason.

@TexasHondaChannel

2 жыл бұрын

Yea they did it because it’s illegal to have noise in some states. I don’t even have to mention the state and I’m sure you know. I remember they saying if it makes any noise louder than factory it’s illegal.

@BShine-ei7hn

2 жыл бұрын

@@TexasHondaChannel I didn't realize that. It makes sense tho to be 50 state legal and CA is crazy about that stuff. Thankfully Texas isn't that way!

@spankthemonkey3437

2 жыл бұрын

@@TexasHondaChannel my no catted strait pipe d16 has a nice little rumble at idle but let me get above 2500rpm at a quarter throttle and it echoes under awnings going by gas stations everyone looks at me not sure of what they are thinking though😆. I just make sure when i pass cops i am barely on throttle. I left out of this restaurant last Friday night where everyone hangs out and drinks at bar and floored it power shift or no lift off gas shift to 2nd looked down i was doing 45 looked back up I was passing a cop clocking speeds lucky I didn't go above the speed limit. Dont know how he didn't hear me probably had his windows up. But the exhaust dump you used to have is probably the safe route to go.

This is one slick RSX!! I didn't know you had the supercharger on yet until I saw your paint video with the pearl on the other channel. I see now I'm behind a few videos. Good thing I'm off for the rest of the night. Great stuff! 👍

@TexasHondaChannel

2 жыл бұрын

Your good no worries!! 😁

Please keep updating man this is such a great video of explanation and everything awesome job keep it up 🔥🔥🔥😎😎

@TexasHondaChannel

2 жыл бұрын

Thank you Will do

Man you really do make it look easy you always have cool project

@TexasHondaChannel

2 жыл бұрын

Thanks for me it is pretty easy to do this stuff and I enjoy doing it so I hope other people can learn from my experience

That whine sounds superb.

Great video bro, coming along nicely. Can't wait to see the next step and watch this build come together. He sees all 😉 God bless. Keep up the great work.

@TexasHondaChannel

2 жыл бұрын

Amen to that I’m glad someone noticed lol

Nice install! However, I wouldn't suggest looping the power steering lines like that. I did that on my Civic after filling the rack with fluid and ended up blowing out the seals. Could be coincidence, but I don't think so. I think what happened is since I looped the lines in the middle of the winter, the fluid expanded from engine/summer heat and built too much pressure since the system was completely sealed. Using some type of vented reservoir to equalize the pressure when the fluid expands and contracts is definitely a better option. Or just get the EPS rack like I did :)

Lookin really good James!

@TexasHondaChannel

2 жыл бұрын

Thank you!!

Can't wait for the tune 👌👍

@TexasHondaChannel

2 жыл бұрын

Same here I’m working as fast as I can

That supercharger whine sounds beautiful even more so than a v8 supercharged!!!

Lord knows I need to get motivated on my build. Great job!

@TexasHondaChannel

2 жыл бұрын

Im doing my best to help motivate people :D

just pulled my rsx out of storage for the season. great timing for this post to catch my interest!

@TexasHondaChannel

2 жыл бұрын

Awesome! 😁

@bpurdx

2 жыл бұрын

@@TexasHondaChannel "heres a clip of me driving it" bro you drove so hard the engine light turned OFF. i'm dead. lmao love it

@TexasHondaChannel

2 жыл бұрын

@@bpurdx that’s a check engine shift light that I wasn’t using lol

As always 🔥 🔥 🔥 content! Keep up the great work! K-Is The Way 🔰💯

If you enjoy power steering another option that will save space and feel great is the ep3 electric power steering set up, it’s almost plug and play

@TexasHondaChannel

2 жыл бұрын

I don’t like electric power steering I’ve seen a lot of mechanical failures causing wrecks because of mechanical steering failures or the polarity switches and it Yanks the steering to the left or the right either way it’s a good idea in theory but there’s too much room for error but to each their own

the run really well on e85, especially if not charge cooled.

Looks like you've done a couple of them before...lol. Not a real fan of Imports but I definitely enjoy your videos. Looking forward to seeing your next video 👍👍

@TexasHondaChannel

2 жыл бұрын

Thanks appreciate the support I think once you get an import and it’s built right they are definitely impressive I’ve owned all kinds of different vehicles from Chevys Fords Hondas Nissans you name it imports definitely have a special spot in my heart but I like all vehicles but like I say to each their own

Love it man I just bought my first supercharged car a 99 grand prix gtp. Love that whine. If I still had my TL I would put one on it but a deer at 80 killed it 😭

@TexasHondaChannel

2 жыл бұрын

I miss my GTP it was quick and took very little to make them fast!

@Texas Honda Channel this is exactly what I want to do! It seems like you kept the air conditioner, did the new pulley configuration bring down A/C performance at all?

Good job! You flew that install :) The Sheikah symbol was a great touch ;) I recently finished Breath of The Wild and what an amazing game it is 🥲I'll start Tears of The Kingdom soon!

Omg the charger wine😍😍😍😍

You can buy the same type of superchargers these days in varrying size ranges, look up TVS / MR K series superchargers, Merc Racing. The CT Superchargers are 900, MR offers 1320, 1900 and 2300.

Freaking quality bud!

@TexasHondaChannel

2 жыл бұрын

Thanks I appreciate it 😁

Sounds sick , just need to put the map sensor on the plenum side so the ecu can see boost and not just vaccum

@TexasHondaChannel

2 жыл бұрын

I didn’t show you up close. It has a bypass that the map sensor sits on and that’s what that vacuum line is going to. It sees positive pressure

@drewster956

2 жыл бұрын

@@TexasHondaChannel nice nice

Where do you get the manifold for the supercharger individually?

Very nice install. How long did it end up taking you total? When the time comes, are you going to try some dyno runs w/ the current hot air intake & again w/ the cold air set up to see the difference between them?

@TexasHondaChannel

2 жыл бұрын

Honestly not sure on the hot air intake versus cold air intake runs yet we will see what happens there it took me about five hours and three of the hours were just trying to get a diagram For the belt routing all in all it should only take a couple hours if you have experience

How many miles on motor!??? Set up look good!

That sounds nice.

@TexasHondaChannel

2 жыл бұрын

I bet it’s gonna sound real nice once I’m able to do an actual pull

@jwagon85

2 жыл бұрын

@@TexasHondaChannel oh I bet it we’ll bro. Can’t wait to take it to the track

Is the magnum powers supercharger reliable.

LETS GOOOOOOOOOOOOOOOOOOOOOOOOOOOO

@TexasHondaChannel

2 жыл бұрын

#letsgolikefr1

@FR11

2 жыл бұрын

@@TexasHondaChannel WOOOOO

Can you use the high flow modular inlet with the rsx?

Where did you relocate you’re PCV HOSES? Lmk please!?!

How can I do this with an Eaton m90 ? On a k24

Is there a supercharger for the automatic RSX?

i Like it! purrs like a kitten-or a mountain lion!!

@TexasHondaChannel

2 жыл бұрын

I will go with lion! We are the head and not the tail!

Did you keep the ac

Did you have any leaks on your power steering bypass with that double washer side? I'm currently installing mine and worry about a leak there.

@TexasHondaChannel

2 жыл бұрын

Nope is solid!

anyone know if MAGNUM POWERS SUPERCHARGER UPGRADE FOR HONDA K20 JACKSON is the same thing?

Non video related any advice on sticking a d16y8 in a car that a d15b7 distributor wise?

@TexasHondaChannel

2 жыл бұрын

The b7 distributor fits the y7 and y8 with no issues 💪🏻

Do u still have this kit to possibly sell ?

Hey Texas Honda, It looks and sound brutal. Can you tell me the part number and brand of that supercharge. I look on line and I can't find one Nothing at all. Thanks for any info.

@TexasHondaChannel

2 жыл бұрын

I left links in the description but as I said in the video these superchargers are no longer made but there are others you can buy, Check the links in the description

@MrEvtmazda

Жыл бұрын

Read up on CSRX. Lots of stories of these SC's not being super reliable and blowing engines quick. Not always the case and you need a good tuner but it's a real risk

Wish there was a way to reliably tune with an auto trans. Without piggy back ect I'd love to supercharge my mini me. Looks good and sounds good in there

@TexasHondaChannel

2 жыл бұрын

There definitely is a way to do it I have seen it done just don’t know the way lol

@GlassWerx

2 жыл бұрын

@@TexasHondaChannel iv seen it with piggy back and stand alone ecu setups just expensive then finding someone to do a tune for an auto is another search in itself

@Jugg215

2 жыл бұрын

Why would you tune an automatic?

@GlassWerx

2 жыл бұрын

@@Jugg215 for the hell of it. Why not right something different if I could find the trans ect I'd just manual swap. But none within 2hrs drive from where I'm @ and not guaranteed to even b there still. Automatics with turbos are making Hella #s @ the tracks and just be something fun pick on unsuspecting cars with. Also no turbo lag.

@Jugg215

2 жыл бұрын

@@GlassWerx I took my girls base RSX and for 2k swapped it to 6 speed with LSD. Was shipped right to my door with warranty...

I remember when my buddy sold u the d series s/c.

@TexasHondaChannel

2 жыл бұрын

That’s been a year or 2 now crazy!

Are those brake calipers oem and painted? Just wondering.

@bryantg562

Жыл бұрын

looks like it

How hard is it to steer without the power steering?

@TexasHondaChannel

2 жыл бұрын

I’ve drove so many cars without power steering and this is one of the easiest ones I’ve drove without it summer easier summer harder it really just depends but personally I like how this one drives

👌

@TexasHondaChannel

2 жыл бұрын

:)

👍🏾👍🏾👍🏾👍🏾

I need more money , I want to supercharge 3 Hondas. 05 Odyssey 06 Element 84 Goldwing Wouldn't mind finding an old Drouin supercharger for one of my SOHC CB750Ks.

@TexasHondaChannel

2 жыл бұрын

Tell me about it the only money I get is from my paychecks and then they go right back into the channel so I can make more paychecks to go right back into the channel. I’m typically broke 100% of the time only because to make content cost money but that would be really cool to see all of those super charged

Bro you might want to invest in some rachet wrenches. They are a life saver. ICON IS MY GO TOO BRAND.

@TexasHondaChannel

2 жыл бұрын

I have some ratchet wrenches but I’ve had them for seven years and a few of them are starting to fail so I think it’s time for an upgrade

where u buy the power steering delete and what belt u running?

@TexasHondaChannel

2 жыл бұрын

The belt came with the supercharger so not sure and the links in the description

@8eastk

2 жыл бұрын

@@TexasHondaChannel mybad, i mean the power steering delete pulley, did it came with the supercharger also. cant wait for your next video.

@TexasHondaChannel

2 жыл бұрын

@@8eastk yes it came with the supercharger kit. There is a similar kit for $2,000 in my description

I beg this gets 100k views

@TexasHondaChannel

2 жыл бұрын

That would be awesome but i just hope it helps someone out there.

@BA5HER123

2 жыл бұрын

@@TexasHondaChannel ofc ofc lol

Ac compatible?

@spicyboidotjpeg8379

Жыл бұрын

This one specifically yes, the supercharger pulley replaces the power steering pulley

Does vtec still work with supercharger ?

@burkejohnson4539

Жыл бұрын

Not by itself no, just putting a supercharger on is not going to take away vtech, but after adding any kind of forced induction you're going to want to look at the fuel mapping again and maybe change the ECU settings for when VTEC enables. Alternatively you may just want to add a higher profile camshaft.

@lapin46

8 ай бұрын

yes, but needs a full remap.

@DoubleDrastik

8 ай бұрын

@@burkejohnson4539 thnx for the info

Get you a thermal gasket for the supercharger buddy.

@TexasHondaChannel

2 жыл бұрын

It’s in the video. It has a thermal gasket lol

Who's on the picture?

@TexasHondaChannel

2 жыл бұрын

It’s Jesus Christ 🙌🏻🕊 or a duplication of him. He probably looked way different in real life be either way. Still the LORD I worship

@MrCt302

2 жыл бұрын

@@TexasHondaChannel come man u seem to be a really cool guy but don't honor things like that. That's idolatry..man draw a picture of something and y'all fall for it.. Come on man be smarter than that throw stuff away..

Ultra black on the intake gasket 🤢

Can you please do me a huge favor? Please remove your ring when working on cars…..

@TexasHondaChannel

2 жыл бұрын

Nah im good. I have been wearing it for 5yrs without fail. I will get a rubber ring though. I don't want a single person thinking im available lol

@hondatrix

2 жыл бұрын

@@TexasHondaChannel Please do your research… would hate to see what happened to me happening to you just because you thought 5 years experience is enough. It’s not.