Support the channel! Grab yourself a Taryl T-Shirt, Coffee Mug, Tools & More! Shipping Worldwide Daily from the Taryl Apparel online store! www.TARYLFIXESALL.com

There is no comparison your videos are the best, so informative. The level of detail that you go in really shows. Keep making videos there're great.

When it comes to percussive maintenance, you are the man Mr Dactle.

I'm a firm believer in applying penetrating oil to these types of rusted assemblies. If time allows, I'll let them sit, them smack 'em with a hammer later. I think rear tires are the worst, when they get rusted onto an axle. But Taryl has an excellent way to remove those with a pneumatic driver with a pointed bit. THANKS TARYL!

@animalcorvair

3 жыл бұрын

just got replacing seals in my troy-bilt tiller i use anti-seize on all my stuff...was about 7 years ago i replaced them an the shaft an gear,, came right off,,

@JasonTylerRicci

3 жыл бұрын

Yea, he uses his "acetaminophen torch" in that video. Lol

@laynejohnson4289

3 жыл бұрын

Rusted rims to hubs and axles are not Joke good thing with lawnmowers you can change the tires on the unit if needed 👍🏻 been there done that

@Francois_Dupont

3 жыл бұрын

@@laynejohnson4289 on a car if the wheels get stuck hit the inner par (below the car) with a sledge hammer. on even the worst case it get them out. i usually put a wooded log between to smash on.

@laynejohnson4289

3 жыл бұрын

Francois Dupont o ya cars are a different story they usually don’t seize on like lawnmower I’m a tire guy by trade anti seize is your best friend with everything but yes usually with a sledge you can break wheels loose if not I use my truck a rachtet strap leave some lugnuts on pull some tension then hit with a hammer if that doesn’t work then time to pull out the torch

Thank you for teaching us about small engine repair; you are a master of your craft.

This video saved my bacon. I tried everything I could think of - multiple crowbars, flywheel puller, homemade puller, lots of penetrating oil - and then in desperation googled "How do I remove a flywheel from a B&S 24HP engine" and this video showed up. A few whacks with my 3lb sledge and it popped right off. I should have started there, huh........

Classic small engine stuff right there. That's how it was taught in Small Engines Shop in school. Thanks for the video!

Ronnie sells his own brand of flywheel remover in a spray can if you want to do it the fast an easy way.

I have watched all of your videos at least twice or more and when I saw the title of this new one I knew in advance you had already taught me this and there wasn't even any comedy element to it BUT I STILL WATCHED because I'm just inspired by your channel and all of your staff and every Sunday I can't wait for me some Mustie1 and then the master of all things lawn and garden equipment related Taryl Fixes All. Oh there are others some across the pond and up north drinking some good ale and beer. But as far as I'm concerned You are #1

Taryl showing off his French language skills! Viola! he says, more then once! Thank you for sharing your knowledge and experience and stay safe out there!

@mackendw

3 жыл бұрын

comment branler votre volant

Very helpful and educational Taryl. Always a pleasure watching your all's videos.

Taryl ,,, So much dinner ,, enough to feed all of your faithfull followers . May we all be truly greatfull.. Much Respect from Down Under

Taryl, you are one smart dude. I try to learn something new everyday and your channel is one of the first places I go to for educational needs.

@palaliam

3 жыл бұрын

I have used this method a lot but one engines e belonged to my uncle. It was a Kohler 12 hp I. A john Deere's garden tractor I put the prybar in place had pressure on the flywheel smacked it with a hammer like this guy and wala the end of the crank broke and fell off from that day forward I bought a flywheel tool and always used it if I had to remove a flywheel that little lesson cost me about 125 dollars for a new crankshaft for uncle's motor enough said a huge fail for me

Thank you Taryl for teaching us all on KZread how to remove flywheels from small engines. Good day too and There's your dinner.

Taryl, you have the best channel on YouTub. Bar none. I don't really care about lawn mowers that much, either. I find your videos to be excellent and funny.

Works like a dream every time! Thanks Taryl

As Taryl says. It aint the space shuttle, it’s a lawnmower!

@d1234567vd

3 жыл бұрын

I'm surprised he never mentioned it in the video😂

I effing love this KZread channel!

Thank you. This is just the information I needed. I'm trying to replace the leaky bottom seal/bearing on a leaf blower.

You did good job . Thanks about your instructions .

I have learned so much from your videos and has savede alot of money! Keep up the good videos!

Awesome method Taryl! Thanks for sharing.

Worked like a charm! Thanks Taryl!

Thats because Taryl you came from the world of broke kid years and years ago same here. Came from a world of figure it out or do without! The know it all's out there are guys thats done it a few times read one manual and now they are a expert ready to show the world their knowledge and tell you your doing it wrong and your here trying to help people out! Dont let their comments get to you Taryl. Lots people out here say wht they think not what they know. Think your fixing 100's a year and making a living and they are sitting on the couch with their keyboard tool kit lol

@jeffvickers9390

3 жыл бұрын

The same school i went to. "Figure it out or do without"

@nathanthomas2155

3 жыл бұрын

I went to the same school and also took a class in "don't have a tool ..so make one"

@jeffvickers9390

3 жыл бұрын

@@nathanthomas2155 With us it was "everything" is a tool. We swapped out a rear end in my buddy's 65 Impala with little more than a couple crescent wrenches. It was either get it done or no cruisin that weekend.

@kajem575

3 жыл бұрын

Yep. I grew up without the benefit of a shed or garage,learned about small engines in jr. high school (6th grade 11yrs. old) used to do complete teardowns on the front sidewalk of the house because of the solid, even,level surface, got my parts and tools at Western Auto store with paper route earnings (3 routes,morning edition,7 dys a week,evening 6 dys,,and one which was every wed. sat and sun.) from age 11 to 14 when I was eligible for work permit. My father ocassionally encouraged often bitched and rarely helped. (I have 5 bros. 3 older 2 younger we did everything ourselves.) And that is EXACTLY how I removed flywheel,learned and understood concept when my dad showed me how to set a hammer head on its handle. Because if me we always had a functioning mower. I received recognition/praise twice for my efforts/knowledge/ability in all that time period, once from dad,once from bro. 5 yrs. my senior. Literally.....if a child can grasp it,how hard can it be?🙂✌❤

@metal.mover23

Жыл бұрын

Shoot I never used a puller for a flywheel and I'm working on Briggs Kohler's and Kawasaki and I love this channel lol... Non of them engines are "wrecked" either🤣🤣🤣😂😂😂

Useful as always Tarryl, thanks.

Love seeing your videos I learn a lot from you

Very nice tutorial Taryl. No machinery and garden engine can resist being repaired by you, excellent attitude. And to that we add your note of humor, I am laughing 🤣🤣🤣🤣 greetings from Spain

I had the bolt threaded from the top kind. I was able to get off in around 10 mins after spending a lot of time trying everything else I could think of! Thanks a lot!

back in the day briggs serves man use to tell you to do this. Good job Taryl keep up the Good work

Thanks for the tip, I remembered there was a way to dobit without a puller but couldn't remember exactly what it was. You saved me s trio so I appreciate you

" you're gonna wreck that engine taryl" haha. Very helpful vid I didn't know about that first tool or that flywheel with a clutch.

Got my Slipdog mug and tee shirt in the mail yesterday!! Thanks boys!

Thank you Taryl for charting 🙏🏽🙏🏽

Thanks for the advice!

Working on a weed Eator and by goly I held it up by the flywheel, smacked the bolt with a bar a few times like you did and it worked, I’m speechless, earned yourself a new subscription

Just tried removing the fly wheel your a genius !!!!!! Thanks

You saved a 49 year old woman's life with this video, thanks!!!

I have to say, EXCELLENT advice.

Thanks for the demo Taryl. The engine i have is a 28 year old B&S off a Snapper. The centre shaft screwed out so i used a socket in the centre and as you said, one good tap and the flywheel was off. The only problem is that previously hammering the hub that holds the drive disk off the drive end, one of the magnets in the flywheel came off. Not the end of the world, it was because of the detached magnet locking up the crankshaft that i had to get the flywheel off. All because of a failed sump gasket. Thanks again.

Works like a charm. Thanks!

Worked as shown!!! Thanks!

Necessity is the mother of invention, as proven by Taryl once again.

first useful flywheel removal vid

Great Job!! Really like your videos 👍😎

You need to clean up the end of your drifts. I once seen a piece of the end that mushrooms fly off when he hit it and hit him in the eye. Almost lost his eye and was out of work for a month. No joke made a believer out of me. Wouldn't want to see you or anyone else in your garage get hurt. Be safe my friend.

Great video as usual, Will this method work on the space shuttle???

Bro . Bro gracias por tus videos . TANKS for your videos .

Another great video Mr.T : )

Thanks , Taryl ,worked for me!

Great tips 👌👍

Thanks for the tips Taryl

OMG... Thank you, I tried everything just shy of buying the tool... I gave this a try and Yess!!!! .... flywheel removed.

Hey taryl good morning great video on how to remove the flyweels and fo those who say your going to ruin the engines they never worked on them and there's your dinner stay safe God bless

I followed your example and it worked for me. It took a few tries because in the beginning I used minimal prying pressure and increased pressure with each try. I wish I had known that 40 years ago.

@rodneykahn6927

2 ай бұрын

and the size of hammer+the right amount of force/blow

You. Are. The. Fucking. Man. Not just the man, your the "fuckin man" in my book. Dude I have been doing this wrong my whole life. Thank you.

Good info, Taryl!

This is great (along with your funny girl voices, LOL 🤣) one of those mowers is the exact one I am having problems with removing my flywheel too! The Briggs and Stratton 450. I will try this tomorrow and hopefully have success by giving it a good , solid whack!! Thanks for the video!!

Watchin ur vidjas really helped me when workin on my mowers especially this here vidja I had 2 remove a flywheel on a Briggs & Stratton quantum engine the other day

Very good video Taryl !! :)

Thanks worked great

Thanks for the video

I LOVE this guy!!! There's your dinner!

@gasperajdnik5627

3 жыл бұрын

👍

What a great resource.

those Taryl teeth look like they could pull some flywheels haha great video again

Good lesson 👍

Excellent dinner Thankyou ,Taryl

Love this guy......

Guess with a name like tetradactyl the use of large hammers is quite natural. Large hammers is how we service Caterpillar tractors with hytest splitting wedges to split them housings aye! Love ya work fella, long may the rural way of mechanics continue on! .

Your awesome man

Them engines are WRECKED Taryl!

Thank you Taryl!

Very interesting. Thanks

Love this method of taking off the flywheel use it all the time

Tayrl is a man among men!

I still like the idea of using an air chisel with either the point or blunt end to remove a flywheel. Not many of us have helping hands about our garages. But a pry bar an the air tool I would have never thought of

I did it worked like a charm

Mucha gracias por el video realmente a sido muy eficas ya que e podido remover un flyweel de un motor koheler courage 19hp tank you very much.

Happy Thanksgiving. I've learned so much from you - thanx!!😊😊 btw at 6:45 time shouldn't one put a piece of wood on the Clutch " ears" when hitting it with a hammer?

Junior, Taryl's going off on his flywheel pulling rant again. Better get him another case of Hamm's to calm him down.

Hi there ! Geetings from France

very good video

you my friend "are the man"

Saved a lot of folk a lot of stress. (And money) good on yer👍

Excellent.

I use that similar procedure to remove generator rotors, just have to protect the windings if you’re going to reuse it.

There is some old school stuff there. Thanks sir.

What are your thoughts regarding oil in a pressure washer? Do you need to use a special oil or will regular detergent 30 weight be fine?

Cool thanks for the tips if I want to buy servicing tools can I go to my local dealer and will they order it thanks

Can I use a bad hammer instead of a good hammer.

That hunk of bar stock is better to hold between the hammer and (many) struck items to direct the blow precisely (like on starter clutches) and not mushroom the stuck ones. Good of you to show it! Brass and lead (if you find them at yard sales etc) hammers are worth owning). If you have nothing but a hammer you can cut a strip from an aluminum can and dangle the between hammer and shaft. (I just hate mushrooming parts so I don't.)

Good one

Thank you sir!

3:09 why buy a knock-off tool when you can buy the real tool for the same price?😁

@davidetcheverry944

3 жыл бұрын

you're good sb......how many got it......

I've never had to remove a small engine flywheel, but if I ever do, I'm doing it Taryl's way with a prybar and a hammer. 🙂

@garrykrause2375

3 жыл бұрын

THERE'SSS YOUR DINNERRRR...

Thank you!!!

I just popped one off a Briggs yesterday. It was stubborn, but a little PB Blaster, patience, prying and pounding...it popped off.

Love the videos LOL

As you always do it a good denier all the time, we need a taste of the next denier please ser can we have some more.

Thanks Taryl; you are knowledgeable and simple. BTW Q: Where do you get your teeth bleached at?

Thanks! Taryl!